| Specifications |
| Model |
SC-2A |
| Spindle Movable Range |
10mm |
|
| Graduation |
※1 |
| Tolerance Setting Range |
3.0 mm |
|
| Accuracy |
±0.005mm |
| Measuring Force |
Less than 1.2N ( 120gf ) |
| Contact capacity |
MAX DC24V 20mA |
| Number of judgement Stages |
Three stages of -NG, OK and +NG |
|
| Cord length |
2 m |
| Stem diameter |
ø8 mm |
| Operating temperature range |
0 - 60 ℃ |
|
| Options |
Dial gauge for setting |
| Dial indicator for setting |
Model 107F, 5F |
|
| Weight |
150 g |
| Cable signal table |
|
|
|
|
|
|
|
|
| Caution |
When the current of 10 to 20 mA is used to drive a photocoupler, etc., the contact may be worn a little earlier. |
| In SC-2A type, the COM terminal is body-grounded ( If leak current is found in other devices, put a gauge into floating status before mounting it ). |
| In SC-2A type, a spindle can be set in a range from its free status to 3mm. Although it may be movable in excess of this limit, you cannot set it in such an excessive level in order to protect the spindle. |
| In SC-2A type, when a dial gauge is dismounted after setting the tolerance, never forget to mount a dust protective cap. |
![[PEACOCK] Signal Gauge SC-2A ( Signal Checker )](http://wowtoolz.com/cdn/shop/products/7_79578d33-fa74-490a-b76e-aaeb320c8e41.png?v=1570327395)
![[PEACOCK] Signal Gauge SC-2A ( Signal Checker )](http://wowtoolz.com/cdn/shop/products/7_79578d33-fa74-490a-b76e-aaeb320c8e41.png?height=310&v=1570327395)