Niigata Seiki

Niigata Seiki (SK) SUS Feeler Gauge 0.01x1m SFG-01-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.01 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.004 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　30 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.05mmx1m SFG-05-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.05 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.04mmx1m SFG-04-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.04 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.02x1m SFG-02-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.02 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.004 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) Taper gauge TPG-700S Feature A taper gauge (# 700 1-15) and a straightedge 130 mm are set, with a clip that is convenient to carry. Silver finish A set of straightedge and feeler gauge! It is a clip type that can be stored in a pocket. specification Measurement of grooves, gaps, hole diameters, etc., length measurement Material: Stainless hardened steel (SUS420J2) Body mass: 40g Standard: 700S   [Taper gauge] Measuring range (mm): 1 to 15 Instrumental error: (mm): ± 0.05 Scale (mm): 0.1 Taper angle: 7 ° 9′10 ″ Body length: 148.5mm   【Straight scale】 Measuring range (mm): 0 to 130 Instrumental error: (mm): ± 0.13 Scale (mm): 0.5 Body length: 155mm Package size: 55 x 9 x 205 mm 　30 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.08mmx1m SFG-08-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.08 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.03mmx1m SFG-03-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.03 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) Protractor No.19 Stainless PRT-19 Feature Stainless steel finish Stainless finish. With a rod scale. specification Scale: 1 ° Maximum measurement angle: 180 ° Accuracy: ± 20' Body: Diameter 90mm x Thickness 1.2mm Rod: Length 204mm x Thickness 1.2mm Material: Stainless steel (SUS420J2) Angle measurement Body mass: 81g Package size: 70 x 17 x 260 mm 　80 g

Read more less

Niigata Seiki (SK) Taper gauge 0.3-4mm TPG-270A Feature It is mainly used when measuring by inserting it into a gap. Silver finish With a PC storage case that is convenient to carry You can easily measure the dimensions of grooves and gaps just by inserting them into the gaps! specification Material: Measurement of grooves, gaps, etc. Measuring range (mm): 0.3-4 Instrumental error: (mm): ± 0.04 Scale (mm): 0.05 Taper, angle: 1 ° 54′33 ″ Measurement of grooves, gaps, etc. Body mass: 95g Body length: 160mm Body width: 11mm Package size: 23 x 188 x 15 mm 　70 g

Read more less

Niigata Seiki (SK) Taper gauge # 700 15-30mm TPG-700B Feature Silver finish You can easily measure the dimensions of grooves and gaps just by inserting them into the gaps! specification Material: Stainless hardened steel (SUS420J2) Hardness: HV480 Standard: # 7001-15 Measuring range (mm): 15 to 30 Instrumental error: (mm): ± 0.05 Scale (mm): 0.1 Taper, angle: 7 ° 9′10 ″ Measurement of grooves, gaps, hole diameters, etc. Body mass: 40g Body length: 153mm Body thickness: 1.2mm Package size: 55 x 12 x 205 mm 　40 g

Read more less

Niigata Seiki (SK) Taper gauge # 700 1-15mm TPG-700A Feature Silver finish You can easily measure the dimensions of grooves and gaps just by inserting them into the gaps! specification Material: Stainless hardened steel (SUS420J2) Hardness: HV480 Standard: # 7001-15 Measuring range (mm): 1 to 15 Instrumental error: (mm): ± 0.05 Scale (mm): 0.1 Taper, angle: 7 ° 9′10 ″ Measurement of grooves, gaps, hole diameters, etc. Body mass: 10g Body length: 148.5mm Body thickness: 1.2mm Package size: 56 x 5 x 205 mm 　20 g

Read more less

Niigata Seiki (SK) Plastic taper gauge Smooth scale TPG-800KD Feature The newly designed stepped scale prevents misreading. 0.2 mm dot scale that is easy to see even if hidden in a pipe. Suitable for measuring objects that you do not want to scratch. Made of plastic that does not easily damage the object. Comes with a clip-shaped slit that is convenient to carry. specification Measuring range (mm): 1-15 Minimum scale (mm): 0.1 Instrumental error (mm): ± 0.2 Package size: 55 x 8 x 205 mm

Read more less

Niigata Seiki (SK) level meter smooth scale ,LM-90KD   Features Analog type, easier to see than bubble level Step-like scale that makes it easy to see the scale in 1 ° units Light and easy to use With magnet on the measurement surface Use Tilt angle measurement Product specifications Specifications / standards Measuring range: 0 to 90 ° Minimum reading: 1 ° Reading accuracy: ± 0.5 ° Measuring range (°): 0-90 Size (mm): 95 x 95 x 30 Minimum display (°): 1 Reading accuracy (°): ± 0.5 Material Body: ABS resin Cover: Acrylic Mass / mass unit 120g

Read more less

Niigata Seiki (SK) Fiber folding scale Smooth scale 1m PFR-100CKD   Feature It is foldable and convenient to carry. Comes with a lock function that clicks at 90 ° and 180 °. The scale is a hot stamp that is more resistant to rubbing than printing. specification Measuring range (mm): 0-1000 Dimensional accuracy (mm): ± 1.5 Number of folds (folds): 5 Scale pitch (mm): Upper and lower steps 1 Package size: 55 x 17 x 285 mm

Read more less

Niigata Seiki (SK) tape measure that can be pasted PM-1320KD   Feature Abrasion resistant nylon coated tape With temporary fixing hole (2 mm) that can be temporarily fixed with nails, etc. With ready-to-use backside adhesive tape specification Material: SK material (nylon coating), maximum measurement length 2.0m, tape width 13mm, tape thickness * 0.3mm * including adhesive tape For dimensional measurement by pasting on a workbench Body mass: 32g Can be used by cutting with adhesive tape on the back Package size: 135 x 90 x 20 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-10-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.1 Plate thickness tolerance (t) (mm): ± 0.01 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-05-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.05 Plate thickness tolerance (t) (mm): ± 0.003 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-04-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.04 Plate thickness tolerance (t) (mm): ± 0.003 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-03-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.03 Plate thickness tolerance (t) (mm): ± 0.003 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-02-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.02 Plate thickness tolerance (t) (mm): ± 0.002 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　30 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-01-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.01 Plate thickness tolerance (t) (mm): ± 0.002 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　30 g

Read more less

Niigata Seiki (SK) Inside Protractor IP-90   Feature The internal angle can be easily measured and the angle can be seen at a glance. A matte silver finish is used on the surface to make the scale easier to read. Robust, light and convenient to carry (with plastic case) Measure the angle of the internal angle in one shot! You can see the measured value at a glance. specification Scale: 1 ° Angle measurement range: 10 to 90 ° Instrumental error: ± 0.5 ° Internal angle angle measurement Body mass: 43g Package size: 141 x 36 x 105 mm 　130 g

Read more less

Niigata Seiki (SK) Crack measure Clear with smooth scale CM-CKD   Feature It can be used to check for cracks on walls and foundations. You can measure the width and length with one sheet. Made of transparent, easy-to-measure, soft and easy-to-use polyester. It's the size of a business card, so it's convenient to carry. Comes with a measurement seal that can be selected according to the application. specification Crack measurement range: 0.03 to 1.5 mm Length measurement range: 80mm Measurement seal type: Diameter measurement, grid measurement, angle measurement Package size: 60 x 2 x 150 mm 

Read more less

Niigata Seiki (SK) Chamfer measurement gauge CMG-10   Feature For measuring the outer circumference chamfer of workpieces in lathes, single-purpose lathes, and turret lathes. For hole chamfer measurement of workpieces in milling machines and drilling machines. You can easily measure and inspect the size of the machined surface! specification Measuring range: 0 to 15C Minimum reading: 0.5 mm Material: Stainless steel (SUS420J2) Measuring the surface size of the work piece Body mass: 20g Body length: 71.6mm Body width: 16mm Body thickness: 2mm Package size: 50 x 7 x 106 mm 　20 g

Read more less

Niigata Seiki (SK) Molding gauge CG-100S   Feature The gauge needle is thin and it is easy to take a smooth curve. You can transfer complex shapes! specification Effective length: 150mm You can make various curved surfaces for molding curved parts. Body mass: 210g Body length: 155mm Body width: 84mm Package size: 130 x 20 x 210 mm 　250 g

Read more less

Niigata Seiki (SK) Angle Protractor AP-130   Features It is possible to measure the angle of members before and after welding in a wide range. Direct measurement is possible without interfering with the swelling after pressure welding and the build-up after welding. It also supports inside and outside angle measurement such as sheet metal bending. The surface has a silver finish. Use Bending angle measurement of pressure welding part and butt joint Bending measurement of flanges and sheet metal Weld joint angle measurement, plate scissors angle measurement Product specifications Specifications / standards Angle of joint part Inclination measurement after stud: 0-180 ° Total length of rod (mm): 90 Overall length (mm): 105 Rod thickness (mm): 1.5 Groove (bevel) angle: Scissors angle 30-130 ° (minimum reading 1 °) Material Stainless steel (SUS410) Mass / mass unit 100g

Read more less

Niigata Seiki (SK) Angle groove gauge WGA-65 Feature By sharpening the tip, it is possible to measure thin plates with a root gap of 0 mm and 15 mm or less. Direct measurement of the groove angle of the welded joint is possible with this one. At the same time, it is possible to measure the angle of the T joint without overlaying. Large scale that is easy to use in the field. The minimum scale corresponds to 0.5 °. A matte silver finish is used on the surface to make the scale easier to read. Robust, light and convenient to carry (with plastic case) A product specializing in angle measurement! The groove angle can be measured with a minimum reading of 0.5 °, which corresponds to various standard tolerances. specification Material: Stainless steel (SUS410) Groove (bevel) angle: 25-65 ° (minimum reading: 0.5 °) Angle of the joint Inclination after stud welding: 70-110 ° Angle measurement accuracy: ± 0.5 ° Groove angle measurement of butt joint, angle measurement of weld joint Body mass: 74g Body length: 117.5mm Package size: 141 x 36 x 105 mm 　170 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 1.00x1m FG-00-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 1.00 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.02 Gap measurement Body mass: 110g Package size: 1040 x 32 x 1 mm 　100 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.90x1m FG-90-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.90 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.02 Gap measurement Body mass: 100g Package size: 1040 x 32 x 1 mm 　90 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.80x1m FG-80-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.80 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.70x1m FG-70-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.70 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.60x1m FG-60-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.60 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.50x1m FG-50-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.50 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.45x1m FG-45-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.45 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 120g Package size: 115 x 115 x 22 mm 　130 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.40x1m FG-40-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.40 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 120g Package size: 115 x 115 x 22 mm 　130 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.35x1m FG-35-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.35 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.30x1m FG-30-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.30 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.25x1m FG-25-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.25 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.20x1m FG-20-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.20 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.15x1m FG-15-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.15 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.14x1m FG-14-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.14 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.13x1m FG-13-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.13 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.12x1m FG-12-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.12 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.11mmx1m SFG-11-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.11 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.006 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.10mmx1m SFG-10-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.10 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.006 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.09mmx1m SFG-09-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.09 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.07mmx1m SFG-07-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.07 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.06mmx1m SFG-06-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.06 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less