SAMICK THK

23 products


  • [SAMICK THK] Taper Precision Diamond Files 4PCS

    Samick THK Samick THK Taper Precision Diamond Files, TP4 (4PCS)

    Samick THK Taper Precision Diamond Files, TP4 (4PCS)   No. Type Contents Length Width (mm) mm 120-2021 200# RED Extra Large(9.0)  Large(7.0)  Medium(4.0)  Small(2.5) 170 120-2030 400# GREEN 120-2049 600# YELLOW

  • [SAMICK THK] Babbit Files ( Lead Float )

    Samick THK Samick THK Babbit Files ( Lead Float )

    Samick THK Babbit Files ( Lead Float ) Single Cut Length Section No. Inch mm (width×Thickness)mm 120-1013 10 250 25×5 120-1022 12 300 29×6

  • [SAMICK THK] Wood Rasps

    Samick THK Samick THK Wood Rasps

    Samick THK Wood Rasps   No. Length Section Material Shape Inch mm (width×Thickness)mm Alloy tool Steel 120-1004 12 300 30×8.5 KS:STS-8 Half Round Wood Rasps 120-0971 12 300 30×6.5 KS:STS-8 Flat Wood Rasps

  • [SAMICK THK] Engineer's Square Files

    Samick THK Samick THK Engineer's Square Files

    Samick THK Engineer's Square Files Shape : With a section square in shape, it tapers off to the point and has equal sides double cut Use Handy for filling slots, keyways splines and inside corner of rectangular and square holes. Sometimes it is preferred for general surface work than a flat file because of its heavier weight and four sides.       Length Width × Thickness Bastard 2nd cut Smooth inch mm mm No. No. No. 6 150 6 120-0555 120-0616 120-0670 8 200 8 120-0564 120-0625 120-0689 10 250 10 120-0573 120-0634 120-0698 12 300 12 120-0582 120-0643 120-0704 14 350 15 120-0591 120-0652 120-0713

  • [SAMICK THK] Diamond Needle Files (5pcs) L=160mm

    Samick THK Samick THK Diamond Needle Files Set (5pcs) L=180mm

    Samick THK Diamond Needle Files Set (5pcs) L=180mm Length (mm) No. Description 180 120-2191  5PCS, 120-2207 Flat Files(5 PCS), 120-2216 Half Round Files(5 PCS), 120-2225 Round Files(5 PCS), 120-2234 Square Files(5 PCS), 120-2243 Triangle Files(5 PCS),

  • Samick THK Impregnated Diamond Dresser

    Samick THK Samick THK Impregnated Diamond Dresser

    Samick THK Impregnated Diamond  Dresser   Name Spec L 30mm× ¢12, L=110mm  S 15mm× ¢12, L=110mm 

  • [SAMICK THK] Taper Precision Diamond Files 3PCS

    Samick THK Samick THK Taper Precision Diamond Files, TP3 (3PCS)

    Samick THK Taper Precision Diamond Files, TP3 (3PCS) No. Type Contents Length Width (mm) mm 120-1998 200# Large(5.0)  Medium(3.5)  Small(2.0) 150 120-2003 400# 120-2012 600#

  • [SAMICK THK] Taper Precision Diamond Files Set, TP12 (12PCS)

    Samick THK Samick THK Taper Precision Diamond Files Set, TP12 (12PCS)

    Samick THK Taper Precision Diamond Files Set, TP12 (12PCS)   Model No. Contents Length (mm) TP12 (12 PCS) TP4 200# 170 TP4 400# TP4 600#

  • [SAMICK THK] Taper Precision Diamond Files Set TP10 (10PCS)

    Samick THK Samick THK Taper Precision Diamond Files Set, TP10 (10PCS)

    Samick THK Taper Precision Diamond Files Set, TP10 (10PCS) Model No. Contents Length (mm) TP10 (10 PCS) TP3 200# 150 TP3 400# TP3 600# Round 400#

  • [SAMICK THK] Taper Precision Diamond Files 5PCS

    Samick THK Samick THK Taper Precision Diamond Files 5PCS

    Samick THK Taper Precision Diamond Files 5PCS   No. Type Width (mm) Length (mm) IN 120-2395 200# 5 150 5 PCS  120-2526 200# 2.5 170 5 PCS  120-2580 200# 7 170 5 PCS  120-2483 200# 9 170 5 PCS  120-2757 400# 4 170 5 PCS  120-2544 400# 7 170 5 PCS  120-2614 400# 9 170 5 PCS  120-2562 600# 2.5 170 5 PCS  120-2571 600# 4 170 5 PCS  120-2465 600# 7 170 5 PCS  120-2605 600# 9 170 5 PCS 

  • [SAMICK THK] Saw Files

    Samick THK Samick THK Saw Files

    Samick THK Saw Files Tool Material Alloy Tool Steel KS : STS-8 / JIS : SKS-8   Saw rasps are used for sharpening the teeth of the saw. Sizes are 3 inches,4 inches,5 inches, and 6 inches with a 70 degree angle. Because the side is sharp, it can be used for multiple purposes.     No. Length Section inch mm (width × Thickness)mm 120-0917 3 75 17 × 2.3 120-0926 4 100 20 × 3 120-0935 5 125 25 × 3.5 120-0944 6 150 28 × 4

  • [SAMICK THK] Engineer's Triangular Files

    Samick THK Samick THK Engineer's Triangular Files

    Samick THK Engineer's Triangular Files Shape : With triangle section 60 º angles between three sides, surface tapers toward the point and double cut. Use Used for filling internal angles or cleaning out that flat file or epure file one not accessible. Also for filling taps and cutters in the annealed state.       Length Width × Thickness Bastard 2nd cut Smooth inch mm mm No. No. No. 6 150 12 120-0731 120-0795 120-0856 8 200 15 120-0740 120-0801 120-0865 10 250 17 120-0759 120-0810 120-0874 12 300 20 120-0768 120-0829 120-0883 14 350 22 120-0777 120-0838 120-0892

  • [SAMICK THK] Engineer's Round Files

    Samick THK Samick THK Engineer's Round Files

    Samick THK Engineer's Round Files Shape : With a round section, it tapers toward the point Bastard and 2Nd cut files have double cut and smooth single cut. Use Made for use on various size holes, it especially is designed to file or enlarge holes, circular openings or rounded grooves to small for a half round file.       Length Width × Thickness Bastard 2nd cut Smooth inch mm mm No. No. No. 6 150 6 120-0379 120-0430 120-0494 8 200 8 120-0388 120-0449 120-0500 10 250 10 120-0397 120-0458 120-0519 12 300 12 120-0403 120-0467 120-0528 14 350 14 120-0412 120-0476 120-0537

  • [SAMICK THK] Engineer's Half Round Files

    Samick THK Samick THK Engineer's Half Round Files

    Samick THK Engineer's Half Round Files Shape : The File has half round section, is flat on one side and curved on the other. Tapers toward the point and has double cut sides. Use Widely preferred by machines, engineers repaiamn etc. for filling out concave surfaces and crevices, and for rounding out joles as well as for leaving a smooth finish.       Length Width × Thickness Bastard 2nd cut Smooth inch mm mm No. No. No. 6 150 16×4.5 120-0193 120-0254 120-0315 8 200 21×6 120-0209 120-0263 120-0324 10 250 25×7 120-0218 120-0272 120-0333 12 300 30×8.5 120-0227 120-0281 120-0342 14 350 34×10 120-0236 120-0290 120-0351

  • [SAMICK THK] Engineer's Flat File

    Samick THK Samick THK Engineer's Flat File

    Samick THK Engineer's Flat File Shape : With a regular squre section, this file tapers off in both width and thickness toward the point. Double cut on both sides and single cut on one edge but 4" and 6" have uncut edges. Use Used extensively by all machinists for smoothing surfaces and for rapidly removing sharp edges and burr.   Length Width × Thickness Bastard 2nd cut Smooth inch mm mm No. No. No. 6 150 16×4 120-0014 120-0078 120-0139 8 200 21×5 120-0023 120-0087 120-0148 10 250 25×6 120-0032 120-0096 120-0157 12 300 30×6.5 120-0041 120-0102 120-0166 14 350 34×7.5 120-0050 120-0111 120-0175 16 400 36×8.5 120-0069 120-0120 120-0184

  • [SAMICK THK] Diamond Needle Files (5pcs) L=160mm

    Samick THK Samick THK Diamond Needle Files Set (5pcs) L=200mm

    Samick THK Diamond Needle Files Set (5pcs) L=200mm   Length (mm) No. Description 200 120-2252  5PCS, 120-2261 Flat Files(5 PCS), 120-2270 Half Round Files(5 PCS), 120-2289 Round Files(5 PCS), 120-2298 Square Files(5 PCS), 120-2304 Triangle Files(5 PCS),

  • [SAMICK THK] Diamond Needle Files (5pcs) L=160mm

    Samick THK Samick THK Diamond Needle Files Set (5pcs) L=160mm

    Samick THK Diamond Needle Files Set (5pcs) L=160mm Length (mm) No. Description 160 120-2137  5PCS, 120-2146 Flat Files(5 PCS), 120-2155 Half Round Files(5 PCS), 120-2164 Round Files(5 PCS), 120-2173 Square Files(5 PCS), 120-2182 Triangle Files(5 PCS),

  • [SAMICK THK] Diamond Needle Files Set (5pcs) L=140mm

    Samick THK Samick THK Diamond Needle Files Set (5pcs) L=140mm

    Samick THK Diamond Needle Files Set (5pcs) L=140mm   Length (mm) No. Description 140 120-2076  5PCS, 120-2085 Flat Files(5 PCS), 120-2094 Half Round Files(5 PCS), 120-2100 Round Files(5 PCS), 120-2119 Square Files(5 PCS), 120-2128 Triangle Files(5 PCS),  

  • [SAMICK THK] 8 PCS Needle Files Set

    Samick THK Samick THK 8 PCS Needle Files Set

    Samick THK 8 PCS Needle Files Set   Length Teeth No. Variants mm 200  Needle Files Set (2nd cut) 120-1332 8 PCS, 120-1341 Flat File (8 PCS), 120-1350 Half Round File (8 PCS), 120-1369 Round File (8 PCS), 120-1378 Square File (8 PCS), 120-1387 Triangular File (8 PCS), 120-1396 Warding File (8 PCS), 120-1402 Trape Zoid File (8 PCS), 120-1411 Oval File (8 PCS),  Needle Files Set (Smooth) 120-1420 8 PCS, 120-1439 Flat File (8 PCS), 120-1448 Half Round File (8 PCS), 120-1466 Square File (8 PCS), 120-1475 Triangular File (8 PCS), 120-1493 Trape Zoid File (8 PCS), 120-1509 Oval File (8 PCS),

  • [SAMICK THK] 7 PCS Needle Files Set

    Samick THK Samick THK 7 PCS Needle Files Set

    Samick THK 7 PCS Needle Files Set   Length Teeth No. Variants mm 200  Needle Files Set (2nd cut) 120-1174 7 PCS, 120-1183 Flat File(7 PCS), 120-1192 Half Round File(7 PCS), 120-1208 Round File(7 PCS), 120-1217 Square File(7 PCS), 120-1226 Triangular File(7 PCS), 120-1235 Warding File(7 PCS), 120-1244 Trape Zoid File(7 PCS),  Needle Files Set (Smooth) 120-1253 7 PCS(Smooth) 120-1262 Flat File(7 PCS), 120-1271 Half Round File(7 PCS), 120-1280 Round File(7 PCS), 120-1299 Square File(7 PCS), 120-1305 Triangular File(7 PCS), 120-1314 Warding File(7 PCS), 120-1323 Trape Zoid File(7 PCS),  

  • [SAMICK THK] 5PCS Needle Files Set

    Samick THK Samick THK 5 PCS Needle Files Set

    Samick THK 5 PCS Needle Files Set   Length Teeth No. Variants mm 215  Needle Files Set (2nd cut) 120-1059 5 PCS, 120-1068 Flat File(5 PCS), 120-1077 Half Round File(5 PCS), 120-1086 Round File(5 PCS), 120-1095 Square File(5 PCS), 120-1101 Triangular File(5 PCS), 215  Needle Files Set (Smooth) 120-1110 5 PCS, 120-1129 Flat File(5 PCS), 120-1138 Half Round File(5 PCS), 120-1147 Round File(5 PCS), 120-1156 Square File(5 PCS), 120-1165 Triangular File(5 PCS),

  • [SAMICK THK] 12 PCS Needle Files Set

    Samick THK Samick THK 12 PCS Needle Files Set

    Samick THK 12 PCS Needle Files Set   Length Teeth No. Variants mm 170  Needle Files Set (2nd cut) 120-1730 12 PCS, 120-1749 Flat File (12 PCS), 120-1758 Half Round File (12 PCS), 120-1767 Round File (12 PCS), 120-1776 Square File (12 PCS), 120-1785 Triangular File (12 PCS), 120-1794 Warding File (12 PCS), 120-1800 Trape Zoid File (12 PCS), 120-1819 Oval File (12 PCS), 120-1828 Balance Edge File (12 PCS), 120-1846 Auriform File (12 PCS), 120-1855 Clam File (12 PCS),  Needle Files Set (Smooth) 120-1864 12 PCS, 120-1873 Flat File (12 PCS), 120-1882 Half Round File (12 PCS), 120-1907 Square File (12 PCS), 120-1916 Triangular File (12 PCS), 120-1934 Trape Zoid File (12 PCS), 120-1943 Oval File (12 PCS), 120-1989 Clam File (12 PCS),  

  • [SAMICK THK] 10 PCS Needle Files Set

    Samick THK Samick THK 10 PCS Needle Files Set

    Samick THK 10 PCS Needle Files Set     Length Teeth No. Variants mm 185  Needle Files Set (2nd cut) 120-1518 10 PCS, 120-1527 Flat File(10 PCS), 120-1536 Half Round File (10 PCS), 120-1545 Round File (10 PCS), 120-1554 Square File (10 PCS), 120-1563 Triangular File (10 PCS), 120-1572 Warding File (10 PCS), 120-1581 Trape Zoid File (10 PCS), 120-1590 Oval File (10 PCS), 120-1606 Balance Edge File (10 PCS), 120-1615 Knife File (10 PCS),  Needle Files Set (Smooth) 120-1624 10 PCS, 120-1633 Flat File(10 PCS), 120-1642 Half Round File (10 PCS), 120-1651 Round File (10 PCS), 120-1660 Square File (10 PCS), 120-1679 Triangular File (10 PCS), 120-1688 Warding File (10 PCS), 120-1697 Trape Zoid File (10 PCS), 120-1703 Oval File (10 PCS), 120-1712 Balance Edge File (10 PCS), 120-1721 Knife File (10 PCS),

Login

Forgot your password?

Don't have an account yet?
Create account