Air & Pneumatic Tools

VESSEL AIR Nipper Blade Standard N3AS Features The AS at the end of the product number is a standard type and is a general blade used for cutting copper wire, iron wire, etc. The HS at the end of the product number is brazed with high-speed steel to improve durability. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS3, GT-N3, GT-NR3 Shape: Standard Cutting capacity (mm) Copper wire: 1.0 Cutting capacity (mm) Iron wire: 0.5 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

VESSEL AIR Nipper Blade Standard N30AS Features Standard type. A general blade used for cutting copper wire, iron wire, etc. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS30, GT-N30, GT-NR30, GT-NB30 Shape: Standard Cutting capacity (mm) Copper wire: 3.3 Cutting capacity (mm) Iron wire: 2.8 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

VESSEL AIR Nipper Blade Standard N20AS Features Standard type. A general blade used for cutting copper wire, iron wire, etc. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS20, GT-N20, GT-NR20, GT-NB20 Shape: Standard Cutting capacity (mm) Copper wire: 2.6 Cutting capacity (mm) Iron wire: 2.0 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

VESSEL AIR Nipper Blade Standard N7AS Features Standard type. A general blade used for cutting copper wire, iron wire, etc. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS7, GT-N7, GT-NR7 Shape: Standard Cutting capacity (mm) Copper wire: 1.6 Cutting capacity (mm) Iron wire: 1.0 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

VESSEL AIR Nipper Blade Standard N5AS Features AS at the end of the product number is a standard type and is a general blade used for cutting copper wire, iron wire, etc. The HS at the end of the product number is brazed with high-speed steel to improve durability. Use For cutting and caulking general steel wires and resins. High-speed steel: When you need more durability than special alloy steel, such as when cutting piano wire. Product specifications Specifications / standards Compatible models: GT-NS5, GT-N5, GT-NR5 Cutting capacity (mm) Copper wire: 1.0 Cutting capacity (mm) Iron wire: 0.5 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Shape: Standard

Read more less

VESSEL AIR Nipper GTN30 Features It is compatible with a separate blade and has a wide range of applications. It is safer and more efficient, and leads to less fatigue. For cutting and caulking of resin and metal. specification Pressurized pressure (N): 2744 Cutting capacity (mm) Iron wire: 2.8 Spare blade for iron / copper: N30AS, N30BBB For spare blade resin: N30AP, N30AJ, N30AJL, N30PF, N30AE, NM30AJ, NM30AP, NM30AE Air consumption (cm3 / time): 584 Cutting capacity (mm) Copper wire: 3.3 Working air pressure (MPa): 0.5-0.6 Overall length (mm): 185 Cutting ability (mm) Piano wire: 1.2 Cutting capacity (mm) Soft resin: 10.0 Cutting capacity (mm) Hard resin: 6.5 Bare terminal: 1.25 / 2mm2 Frame angle (mm): 56 Material / Finish: Steel die-cast Country of origin: Japan

Read more less

VESSEL AIR Nipper GTN20 Features It is compatible with a separate blade and has a wide range of applications. It is safer and more efficient, and leads to less fatigue. For cutting and caulking of resin and metal. specification Pressurized pressure (N): 1372 Cutting capacity (mm) Iron wire: 2.0 Spare blade for iron / copper: N20AS, N20HS, N20AG, N20BFB For spare blade resin: N20AP, N20AJ, N20AJL, N20AJB, N20PF, N20AE, N20AH, N20AML1498, NM20AJ, NM20AP, NM20AE Air consumption (cm3 / time): 230 Cutting capacity (mm) Copper wire: 2.6 Working air pressure (MPa): 0.5-0.6 Overall length (mm): 148 Cutting ability (mm) Piano wire: 1.0 Cutting capacity (mm) Soft resin: 7.0 Cutting capacity (mm) Hard resin: 5.0 Bare terminal:- Frame angle (mm): 45 Material / Finish: Steel die-cast Country of origin: Japan

Read more less

VESSEL AIR Impact air Driver GTP6. 5D Spec Bit receptacle (mm): 6.35 capacity screw Dimensions (mm): 6 - 8 maximum clamping torque (N, m): 57.2 no load Speed r.p.m. (rpm): 8500 Air consumption (m3/min): 0.38 Hose inlet: Rc1/4 exhaust: Front Length (mm): 152 Mass (kg): 1.45 use Air Pressure: 0. 6MPa chuck method: one touch type Conform bit: Domestic Standard Type (13mm) Application: side, upward or downward, various directions in screw tightening. field-work. Country of origin: Japan Weight: 1.45kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTP6. 5D

Read more less

VESSEL AIR impact type air driver GTPLH2 Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact and lightweight, it provides a strong tightening force. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Use For downward screw tightening. For work on the assembly line. Product specifications Specifications / standards Operating air pressure: 0.6MPa Bit outlet (mm): 6.35 Capacity Screw size (mm): 5 to 6 Maximum tightening torque (N ・ m): 40.5 No-load rotation speed (min (-1st power)): 8500 Air consumption ((M3) / min): 0.30 Hose mounting port: Rc1 / 4 Exhaust: Upper Overall length (mm): 213 No-load rotation speed (rpm): 8500 Compatible bit: Domestic standard type (13 mm) Chuck method: Bit sleeve type

Read more less

VESSEL AIR Impact Air Driver GTS6MLR　 Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact and lightweight, it provides a strong tightening force. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Use For downward screw tightening. For work on the assembly line. Product specifications Specifications / standards Operating air pressure: 0.6MPa Bit outlet (mm): 6.35 Capacity Screw size (mm): 5 to 6 Maximum tightening torque (N ・ m): 31.0 No-load rotation speed (min (-1st power)): 8500 Air consumption ((M3) / min): 0.25 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 215 No-load rotation speed (rpm): 8500 Compatible bit: Domestic standard type (13 mm) Chuck method: Bit sleeve type

Read more less

VESSEL AIR Impact type air driver GTS6.5D Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact, lightweight and strong tightening force can be obtained. Stable tightening is possible because it is a 1-turn 2-stroke type. For downward screw tightening. For work on the assembly line. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): 6-8 Maximum tightening torque (N ・ m): 57.2 No-load rotation speed (min ^ -1): 7500 Air consumption (m3 / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 217 Chuck method: Bit sleeve type No-load rotation speed (rpm): 7500 Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact type air driver GT PLR Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact and lightweight, it provides a strong tightening force. Fast tightening speed and excellent workability. For downward screw tightening. For work on the assembly line. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): 4-5 Maximum tightening torque (N ・ m): 16.8 No-load rotation speed (min ^ -1): 9000 Air consumption (m3 / min): 0.20 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 187 Chuck method: Bit stop ball type No-load rotation speed (rpm): 9000 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Air Driver GT-S6LXD Spec Bit receptacle (mm): 6.35 capacity screw Dimensions (mm): 5 - 6 maximum clamping torque (N, m): 48 no load Speed r.p.m. (rpm): 12000 Air consumption (m3/min): 0.4 Hose inlet: G1/4 exhaust: 360 ° Length (mm): 212 noise level (dB): LpA/86. 2 LwA/97 2 Mass (kg): 0.82 use Air Pressure: 0. 6MPa chuck method: bit Sleeve type Straight type silencer with Vibration value (m/s2): 12.47 aluminum Application: housing, Refrigerator, TV, Bicycle, motorcycles, rolling stock, and pneumatic equipment various assembly line. Country of origin: Japan Weight: 0.82kg Set content: Bit /A14 + 2x65G, Outlet /BPN - 2F, Rotation section hydraulic oil V G-10, hydraulic oil V G-32 * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTS6LXD

Read more less

VESSEL AIR Driver GT-PLXD Features The oil lubrication method reduces noise. The jarring hammer hitting sound changes to a soft sound quality. There is no seizure of the hammer part and it is highly durable. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Sash, air conditioner, water heater, refrigerator, TV, kitchen equipment, housing, pneumatic equipment, bicycle, motorcycle, home appliance recycling, OA equipment recycling, etc. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): Normal screw diameter M4.0-5.0 / Tapping screw 3.8-4.2 Maximum tightening torque (N ・ m): 19.5 No-load rotation speed (min ^ -1): 11000 Air consumption (m3 / min): 0.35 Hose mounting port: G1 / 4 Exhaust: 360 ° Overall length (mm): 198.5 Chuck method: Bit sleeve type Noise level (dB): 88 No-load rotation speed (rpm): 11000 Capacity: Normal screw diameter M4.0-5.0mm Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.6MPa 6.35mm hex bit sleeve type Hose fitting: G 1/4 Vibration value (m / s2): 20.26 Set contents: Bit (A14 + 2 x 65G), outlet (BPN-2F) Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Driver GT-S4.5XD Features The oil lubrication method reduces noise. The jarring hammer hitting sound changes to a soft sound quality. There is no seizure of the hammer part and it is highly durable. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Use Sash, air conditioner, water heater, refrigerator, TV, kitchen equipment, housing, pneumatic equipment, bicycle, motorcycle, home appliance recycling, OA equipment recycling, etc. Product specifications Specifications / standards Operating air pressure: 0.6MPa 6.35mm hex bit sleeve type Hose fitting: G 1/4 Vibration value (m / s2): 20.26 Bit outlet (mm): 6.35 Capacity Screw size (mm): Normal screw diameter M4.0-5.0 / Tapping screw 3.5-4.0 Maximum tightening torque (N ・ m): 23.5 No-load rotation speed (min (-1st power)): 14500 Air consumption ((M3) / min): 0.20 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 188 No-load rotation speed (rpm): 14500 Capacity: Normal screw diameter M4.0-5.0mm Compatible bit: Domestic standard type (13 mm) Noise level (dB) Chuck method: Bit sleeve type

Read more less

VESSEL AIR driver deceleration type GTH5R Features There is little variation in tightening torque, and reliable and stable tightening can be performed. Since there is little impact operation, there is little vibration and noise, which contributes to improving the work environment. It has excellent durability because there is little wear on the parts. For assembly lines of electronic devices. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): 4-5 Maximum tightening torque (N ・ m): 6.5 No-load rotation speed (min ^ -1): 1500 Air consumption (m3 / min): 0.25 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 225 Chuck method: Bit stop ball type No-load rotation speed (rpm): 1500 Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.6MPa Lever push start type Set contents: Bit (A14 + 2 x 65G), outlet (BPN-2F) Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR driver deceleration type GTH4R Features There is little variation in tightening torque, and reliable and stable tightening can be performed. Since there is little impact operation, there is little vibration and noise, which contributes to improving the work environment. It has excellent durability because there is little wear on the parts. Use For assembly lines of electronic devices. Product specifications Specifications / standards Operating air pressure: 0.6MPa Lever push start type Bit outlet (mm): 6.35 Capacity Screw size (mm): 3-4 Maximum tightening torque (N ・ m): 3.0 No-load rotation speed (min (-1st power)): 1500 Air consumption ((M3) / min): 0.20 Hose mounting port: G1 / 4 Exhaust: 360 ° Overall length (mm): 190 Chuck method: Bit stop ball type No-load rotation speed (rpm): 1500 Compatible bit: Domestic standard type (13 mm)

Read more less

VESSEL AIR Micro Grinder GTMG55SR Features Precision motor processing and double bearings suppress runout. High-speed rotation realizes high runout accuracy and light and smooth grinding. Compact and lightweight, it maintains stable performance for a long time. Since the exhaust hose is attached, oil etc. will not scatter at hand. For precision grinding. Deburring of press punched products. Mold cutting, polishing, mirror processing. Grinding and engraving of various dies, surface finishing of castings and welds, deburring after machining, finishing of complicated curved surfaces, internal grinding, chamfering of gears, etc. specification Chuck inner diameter (mm): 3 No-load rotation speed (min ^ -1): 55000 Air consumption (m3 / min): 0.160 Hose mounting port: Rc1 / 4 Exhaust: Rear Overall length (mm): 180 No-load rotation speed (rpm): 55000 Operating air pressure: 0.6MPa Exhaust direction: Rear, with silencer Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench GTP18J Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 16 to 20 Socket insertion angle (mm): 19.0 Maximum tightening torque (N ・ m): 470.7 No-load rotation speed (min ^ -1): 5000 Air consumption (m3 / min): 0.52 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 240 Hammer type: Single hammer No-load rotation speed (rpm): 5000 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench GT2000P Features Strong tightening is possible because it is a one-turn, one-stroke type. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 16 to 20 Socket drive angle (mm): 19.0 Maximum tightening torque (N ・ m): 470.7 No-load rotation speed (min (-1st power)): 5000 Air consumption ((M3) / min): 0.45 Hose mounting port: Rc1 / 4 Exhaust: forward Overall length (mm): 241 Hammer type: Single hammer No-load rotation speed (rpm): 5000

Read more less

VESSEL AIR Impact Wrench GTP12 Features Strong tightening is possible because it is a one-turn, one-stroke type. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 12-14 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 294.1 No-load rotation speed (min (-1st power)): 7500 Air consumption ((M3) / min): 0.40 Hose mounting port: Rc1 / 4 Exhaust: forward Overall length (mm): 185 Hammer type: Single hammer No-load rotation speed (rpm): 7500

Read more less

VESSEL AIR Impact Wrench GTP14J Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 14 to 16 Socket insertion angle (mm): 12.7 Maximum tightening torque (N ・ m): 323.6 No-load rotation speed (min ^ -1): 6500 Air consumption (m3 / min): 0.42 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 197 Hammer type: Single hammer No-load rotation speed (rpm): 6500 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench double Hammer　GTP80W Spec Bolt Diameter (mm): 8 - 10 Socket Bayonet angle (mm): 12.7 maximum clamping torque (N, m): 259.8 no load Speed r.p.m. (rpm): 7500 Air consumption (m3/min): 0.40 Hose mounting opening: Rc1/4 exhaust: Front Length (mm): 164 Hammer Type: Double Hammer Mass (kg): 1.89 use Air Pressure: 0. 6MPa Application: General industrial, assembly, minutes solution work. Country of origin: Japan Weight: 1.89kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTP80W

Read more less

VESSEL AIR Impact Wrench GT1600P Features Strong tightening is possible because it is a one-turn, one-stroke type. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 14 to 16 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 308.9 No-load rotation speed (min (-1st power)): 6700 Air consumption ((M3) / min): 0.36 Hose mounting port: Rc1 / 4 Exhaust: forward Overall length (mm): 196 Hammer type: Single hammer No-load rotation speed (rpm): 6700

Read more less

VESSEL AIR Impact Wrench GT1400P GT-1400P Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 12-14 Socket insertion angle (mm): 12.7 Maximum tightening torque (N ・ m): 294.1 No-load rotation speed (min ^ -1): 7000 Air consumption (m3 / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 182 Hammer type: Single hammer No-load rotation speed (rpm): 7000 Operating air pressure: 0.6MPa Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench Double Hammer GTP65W Features Stable tightening is possible with 1 rotation and 2 strokes. It has excellent durability and is ideal for use on frequently used production lines. For general industry, assembly, and disassembly work. specification Capacity Bolt diameter (mm): 6-8 Socket insertion angle (mm): 9.5 Maximum tightening torque (N ・ m): 121.6 No-load rotation speed (min ^ -1): 8500 Air consumption (m3 / min): 0.38 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 146 Hammer type: Double hammer No-load rotation speed (rpm): 8500 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench GTP6-2 GT-P6-2 Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 6-8 Socket insertion angle (mm): 9.5 Maximum tightening torque (N ・ m): 121.6 No-load rotation speed (min ^ -1): 8500 Air consumption (m3 / min): 0.38 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 146 Hammer type: Single hammer No-load rotation speed (rpm): 8500 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench Double Hammer GTS60CW Features Stable tightening is possible because it hits 2 times in 1 rotation. Has excellent durability on frequently used lines. Use For general industry, assembly, and disassembly work. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 6-8 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 47.0 No-load rotation speed (min (-1st power)): 7300 Air consumption ((M3) / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 255 Hammer type: Double hammer No-load rotation speed (rpm): 7300

Read more less

VESSEL AIR Air Impact Wrench double Hammer GTS70 WK Spec Bolt Diameter (mm): 6 - 8 Socket Bayonet angle (mm): 9.5 maximum clamping torque (N, m): 176.5 no load Speed r.p.m. (rpm): 7000 Air consumption (m3/min): 0.39 Hose mounting opening: Rc1/4 exhaust: Back Length (mm): 231 Hammer Type: Double Hammer Mass (kg): 1.3 use Air Pressure: 0. 6MPa Application: General industrial, assembly, minutes solution work. Country of origin: Japan Weight: 1.3kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTS70WK

Read more less

VESSEL AIR Impact Wrench Single Hammer GTS650 Features Strong tightening is possible because it is a one-turn, one-stroke type. It is tightened with an air motor and has excellent durability. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 6-8 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 121.6 No-load rotation speed (min (-1st power)): 7500 Air consumption ((M3) / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 210 Hammer type: Single hammer No-load rotation speed (rpm): 7500

Read more less