SP AIR

58 products


  • SP AIR SP-5000GE  1" Impact Wrench ,8"Long

    SP Air SP AIR SP-5000GE  1" Impact Wrench ,8"Long

    SP AIR SP-5000GE  1" Impact Wrench ,8"Long Spec  Spec of SP-5000GE Bolt Capacity 50 mm Max Torque 2700 Nm Working Torque Range 280-1900 Nm Free Speed 3,000 rpm Length 635 mm Weight 17.9 kg Hammer Mechanism Pinless

    $910.70

  • SP AIR light weight impact wrench 12.7 mm square,SP-7140(1/2SQ)

    SP Air SP AIR light weight impact wrench 12.7 mm square,SP-7140(1/2SQ)

    SP AIR light weight impact wrench 12.7 mm square,SP-7140(1/2SQ) Features Equipped with a rubber grip that is easy to hold and does not slip. Built-in air regulator. The reverse side (loose) is powered up with a built-in bias motor. Use Tire work for passenger cars, U-bolt attachment / detachment work for light trucks, etc. Product specifications Specifications / standards Operating air pressure: 0.62MPa Recommended hose inner diameter: 6.35 mm Capacity Bolt diameter (mm): 16 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 450 No-load rotation speed (min (-1st power)): 5800 Air consumption ((M3) / min): 0.6 Hose mounting port: NPT1 / 4 Exhaust: Down Overall length (mm): 185 Hammer type: Twin hammer No-load rotation speed (rpm): 5800 Capacity bolt diameter

    $197.47

  • SP AIR Ultralight 1600 Class Impact Wrench, SP-7146EX(1/2SQ)

    SP Air SP AIR Ultralight 1600 Class Impact Wrench, SP-7146EX(1/2SQ)

    SP AIR Ultralight 1600 Class Impact Wrench, SP-7146EX(1/2SQ) Features It is a composite body, ultra-lightweight and ultra-short body. Use For tire attachment / detachment work. Product specifications Specifications / standards Operating air pressure: 0.62MPa Capacity Bolt diameter (mm): 16 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 330 No-load rotation speed (min (-1st power)): 9000 Air consumption ((M3) / min): 0.6 Hose mounting port: NPT1 / 4 Exhaust: Down Overall length (mm): 133 Hammer type: Twin hammer No-load rotation speed (rpm): 9000

    $219.11

  • SP AIR Ultralight air drill 13mm (with forward / reverse rotation mechanism) SP-7527

    SP Air SP AIR Ultralight air drill 13mm (with forward / reverse rotation mechanism) SP-7527

    SP AIR Ultralight air drill 13mm (with forward / reverse rotation mechanism) SP-7527 Features Super lightweight with a reinforced resin body. You can easily switch between forward and reverse with one hand. You can fine-tune and control the speed with the trigger. The total length is short and it is easy to see at hand. For general drilling work. Since it has a forward / reverse rotation function, it is also suitable for drilling holes in wood, etc., and screws can be attached / detached with a screwdriver bit. Tapping correction work is possible. specification Chuck capacity (mm): 13 No-load rotation speed (min ^ -1): 400 Air consumption (m3 / min): 0.4 Drilling capacity (mm): 13 Overall length (mm): 180 Hose mounting port: NPT1 / 4 Exhaust: Rear Operating air pressure: 0.62MPa With forward / reverse rotation function Country of origin: Japan

    $219.11

  • SP AIR Swing Air Ratchet Wrench 9.5mm Square ,SP-1772(3/8SQ)

    SP Air SP AIR Swing Air Ratchet Wrench 9.5mm Square ,SP-1772(3/8SQ)

    SP AIR Swing Air Ratchet Wrench 9.5mm Square ,SP-1772(3/8SQ) Feature The head rotates 360 °. The position is determined every 90 °. You can change the direction of the lever even in places where you can hit the lever to pull it. For work in hard-to-reach places such as the engine room of a car. specification Capacity Bolt diameter (mm): 10 Socket insertion angle (mm): 9.5 Maximum tightening torque (N ・ m): 20 No-load rotation speed (min ^ -1): 220 Air consumption (m3 / min): 0.2 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 168 No-load rotation speed (rpm): 220 Operating air pressure: 0.62MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

    $127.14

  • SP AIR straight air drill 10mm, SP-1523D

    SP Air SP AIR straight air drill 10mm, SP-1523D

    SP AIR straight air drill 10mm, SP-1523D Features It is a mini size that is much lighter than an electric drill with the same performance. The compact design weighs about half the weight of an electric drill. Comes with a silencer. Use For general drilling work. Product specifications Specifications / standards Operating air pressure: 0.62MPa Chuck capacity (mm): 10 No-load rotation speed (min (-1st power)): 3800 Air consumption ((M3) / min): 0.4 Drilling capacity (mm): 10 Overall length (mm): 192 Hose mounting port: NPT1 / 4 Exhaust: Rear No-load rotation speed (rpm): 3800

    $162.30

  • SP AIR Super Light weight Impact Wrench 12.7mm sq,SP-7144A(1/2SQ)

    SP Air SP AIR Super Light weight Impact Wrench 12.7mm sq,SP-7144A(1/2SQ)

    SP AIR Super Light weight Impact Wrench 12.7mm sq,SP-7144A(1/2SQ)   Spec Bolt Diameter (mm): 16 Socket Bayonet angle (mm): 12.7 maximum clamping torque (N, m): 550 no load Speed r.p.m. (rpm): 6200 Air consumption (m3/min): 0.6 Hose mounting opening: NPT1/4 exhaust: lower Length (mm): 154 Hammer Type: Twin Hammer Mass (kg): 1.78 Recommended Hose inner diameter: 6.5mm use Air Pressure: 0. 62MPa Application: Automatic car maintenance. Country of origin: Japan Weight: 1.78kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: SP7144A

    $240.74

  • SP AIR Ultra light Impact Driver 6.35mm SP-7825H

    SP Air SP AIR Ultra light Impact Driver 6.35mm SP-7825H

    SP AIR Ultra light Impact Driver 6.35mm SP-7825H Features Super lightweight with a reinforced resin body. It has excellent operability with easy forward / reverse switching with one hand. You can fine-tune and control the speed with the trigger. A mini type that fits perfectly in your hand. For attaching and detaching small diameter bolts for general maintenance work such as automobiles and aircraft. Ideal for work in tight spaces. specification Bit outlet (mm): 6.35 Capacity screw size (mm): 6 Maximum tightening torque (N ・ m): 48 No-load rotation speed (min ^ -1): 17000 Air consumption (m3 / min): 0.4 Hose mounting port: NPT1 / 4 Exhaust: Down Overall length (mm): 120 Chuck method: Bit sleeve type No-load rotation speed (rpm): 17000 Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.62MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

    $184.85

  • SP AIR SP-1193GEP2 (1" Impact Wrench)

    SP Air SP AIR SP-1193GEP2 (1" Impact Wrench)

    SP AIR SP-1193GEP2 (1" Impact Wrench) Spec  Spec of SP-1193GEP2 Bolt Capacity 41 mm Max Torque 2100 Nm Working Torque Range 280-2100 Nm Free Speed 4,000 rpm Length 285 mm Weight 10.5 kg Hammer Mechanism Pinless

    $816.02

  • SP AIR SP-1810A  1/4" Screw Driver

    SP Air SP AIR SP-1810A  1/4" Screw Driver

    SP AIR SP-1810A  1/4" Screw Driver Spec  Spec of SP-1810A Chuck Hex. Size 6.35 mm Working Torque Range 11-17 Nm Free Speed 2,200 rpm Length 205 mm Weight 1.4 kg

    $259.68

  • SP AIR SP-1800A  1/4" Screw Driver

    SP Air SP AIR SP-1800A  1/4" Screw Driver

    SP AIR SP-1800A  1/4" Screw Driver Spec  Spec of SP-1800A Chuck Hex. Size 6.35 mm Working Torque Range 5-14 Nm Free Speed 1,800 rpm Length 250 mm Weight 1.3 kg

    $259.68

  • SP AIR SP-1192EX2  (1" Impact Wrench)

    SP Air SP AIR SP-1192EX2  (1" Impact Wrench)

    SP AIR SP-1192EX2  (1" Impact Wrench) Spec  Spec of SP-1192EX2 Bolt Capacity 38 mm Max Torque 1500 Nm Working Torque Range 200-1300 Nm Free Speed 4,100 rpm Length 360 mm Weight 6.3 kg Hammer Mechanism Twin Dog

    $937.75

  • SP AIR SP-1190P-2  1" Impact Wrench , 2" Short

    SP Air SP AIR SP-1190P-2  1" Impact Wrench , 2" Short

    SP AIR SP-1190P-2  1" Impact Wrench , 2" Short Spec  Spec of SP-1190P-2 Bolt Capacity 38 mm Max Torque 2200 Nm Working Torque Range 200-1350 Nm Free Speed 4,000 rpm Length 250 mm Weight 9 kg Hammer Mechanism Single Dog

    $891.77

  • SP AIR Reciprocating saw SP-7610

    SP Air SP AIR Reciprocating saw SP-7610

    SP AIR Reciprocating saw SP-7610 Features By incorporating a crank mechanism, the power of the motor is efficiently transmitted to the blade. We have achieved power that cannot be obtained with a piston type air saw. specification Stroke length (mm): 12 Cutting capacity (mm): Iron plate 4.0 Number of strokes (times / minute): 5300 Air consumption (m3 / min): 0.5 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 207 Operating air pressure: 0.62MPa Country of origin: Japan

    $280.43

  • SP AIR SP-1191DH  1" Air Impact Wrench

    SP Air SP AIR SP-1191DH  1" Air Impact Wrench

    SP AIR SP-1191DH  1" Air Impact Wrench Spec  Spec of SP-1191DH Bolt Capacity 32 mm Max Torque 1650 Nm Working Torque Range 280-1000 Nm Free Speed 5,500 rpm Length 220 mm Weight 6.2 kg Hammer Mechanism Single Dog

    $600.52

  • SP AIR Orbital sander 100 × 180mm Dust absorption type SP3800DFA5

    SP Air SP AIR Orbital sander 100 × 180mm Dust absorption type SP3800DFA5

    SP AIR Orbital sander 100 × 180mm Dust absorption type SP3800DFA5 Features Low center of gravity design makes it easy to use and does not get tired even when working for a long time With a satin finish rubber cap that fits in your hand Built-in air regulator Outstanding operability due to the adoption of a lightweight body Strong dust absorption type For all kinds of polishing work such as sharpening and smoothing putty Ideal for line-out finish polishing work specification No-load rotation speed (rpm): 7000 Overall length (mm): 230 Pad size (mm): 100 x 180 Orbit diameter (mm): 5 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.57

    $327.31

  • SP AIR Orbital sander 75 × 110mm Dust absorption type SP3900DFA3

    SP Air SP AIR Orbital sander 75 × 110mm Dust absorption type SP3900DFA3

    SP AIR Orbital sander 75 × 110mm Dust absorption type SP3900DFA3 Features Uses a resin body that is easy to use and has a soft feel that improves work efficiency. Especially suitable for work in cold regions and cold days 75mm x 110mm size that fits comfortably in your hand Built-in air regulator Strong dust absorption type Low center of gravity design that fits the painted surface Ideal for finish polishing work especially in narrow spaces such as corners and curved surfaces specification No-load rotation speed (rpm): 9500 Overall length (mm): 117 Pad size (mm): 75 x 110 Orbit diameter (mm): 3 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.86

    $251.57

  • SP AIR Punch Flange Tool 5.5mmφ SP1600B

    SP Air SP AIR Punch Flange Tool 5.5mmφ SP1600B

    SP AIR Punch Flange Tool 5.5mmφ SP1600B Features Efficiently handle flange work and punching work with two roles in one unit Optimal when used in combination with a CO2 semi-automatic welding machine High power air hydro type One unit can perform two roles for punching and flange work for body repair work. specification Overall length (mm): 175 Folding ability (mm): 1.5 Hole drilling ability (mm): 5.5φ Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.0

    $229.03

  • SP AIR Needle Scaler SP1460

    SP Air SP AIR Needle Scaler SP1460

    SP AIR Needle Scaler SP1460 Features Straight type Spatter removal of welded parts, rust and shell removal of ships, etc. specification Overall length (mm): 230 Piston diameter (mm): 20 Number of hits (bpm): 5000 Piston stroke (mm): 12 Needle diameter (mm): 3 Number of needles (pieces): 12 Needle length (mm): 180 Weight (kg): 1.26 Air consumption (m / min): 0.2 Hose mounting port (in) 1/4 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 Mass (kg): 1.26

    $343.54

  • SP AIR Mini Air Saw SP7600

    SP Air SP AIR Mini Air Saw SP7600

    SP AIR Mini Air Saw SP7600 Features Ultra-mini size that makes it easy to cut in narrow spaces Lever with safety stopper to prevent accidents due to unexpected start Rear exhaust (rear exhaust) type With a hand-friendly rubber grip Easy blade replacement For cutting body panels and other thin iron plates specification Overall length (mm): 222 Cutting capacity (mm): 1.0 Number of strokes (rpm): 3400 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.45

    $249.77

  • SP AIR Mini Ratchet Wrench 6.35mm Square ,SP-1760A(1/4SQ)

    SP Air SP AIR Mini Ratchet Wrench 6.35mm Square ,SP-1760A(1/4SQ)

    SP AIR Mini Ratchet Wrench 6.35mm Square ,SP-1760A Features A mini ratchet wrench weighing only 165 mm and 0.5 kg. The ball-type anvil makes it easy to attach and detach the socket. The ratchet head is hardened and has excellent durability. Comes with a red cover to protect the ratchet head. Use For detailed work such as interior / exterior work of the car body, engine repair of small cars and motorcycles, bench work and installation work of headlights, air conditioners, meters. Product specifications Specifications / standards Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 6.35 Maximum tightening torque (N ・ m): 20 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Overall length (mm): 165 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 No-load rotation speed (rpm): 310

    $119.93

  • SP AIR Mini Ratchet Wrench 9.5mm Square, SP-1762(3/8SQ)

    SP Air SP AIR Mini Ratchet Wrench 9.5mm Square, SP-1762(3/8SQ)

    SP AIR Mini Ratchet Wrench 9.5mm Square, SP-1762 Features The ball-type anvil makes it easy to attach and detach the socket. The ratchet head is hardened and has excellent durability. Comes with a red cover to protect the ratchet head. A mini ratchet wrench weighing only 165 mm and 0.5 kg. Use For detailed work such as interior / exterior work of the car body, engine repair of small cars and motorcycles, bench work and installation work of headlights, air conditioners, meters. Product specifications Specifications / standards Operating air pressure: 0.62MPa Recommended hose inner diameter: 6.35 mm Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 20 No-load rotation speed (min (-1st power)): 310 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 165 No-load rotation speed (rpm): 310

  • SP AIR K-1 ratchet wrench 9.5 mm square, SP-7765(3/8SQ)

    SP Air SP AIR K-1 ratchet wrench 9.5 mm square, SP-7765(3/8SQ)

    SP AIR K-1 ratchet wrench 9.5 mm square, SP-7765(3/8SQ) Features It is highly durable. Secure the ratchet anvil firmly. Use Interior / exterior work of the car body, engine repair of small cars and motorcycles. If you use a long socket, you can tighten and loosen nuts for long bolts such as bumpers. Product specifications Specifications / standards Built-in air regulator Exhaust direction 360 ° rotary rear exhaust Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 25 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Overall length (mm): 195 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 No-load rotation speed (rpm): 220

    $137.95

  • SP AIR Impact Wrench 1100ft/lbs SP 3/4" Drive Stubby SP-1158M

    SP Air SP AIR Impact Wrench 1100ft/lbs SP 3/4" Drive Stubby SP-1158M

    SP AIR Impact Wrench 1100ft/lbs SP 3/4" Drive Stubby SP-1158M Description IMPACT WRENCH 1100FT/LBS SP 3/4“DR STUBBY Categories: Impact Wrenches, Air Tools, Air Tools   Description  Additional information Product Description Features: Made in Japan by SP Air Well suited for trucking and tyre industries Stubby style Adjustable torque Single dog clutch Includes nitto style air fitting Specifications: Length: 200mm Capacity: 25mm Weight: 5.1kg Air Con: 1080L/min Max Bolt Busting Torque: 1900Nm Max Torque: 1500Nm Working Torque: 900Nm

    $577.98

  • SP AIR Impact wrench 19mm square SP1156TR, SP-1156TR(3/4SQ)

    SP Air SP AIR Impact wrench 19mm square SP1156TR, SP-1156TR(3/4SQ)

    SP AIR Impact wrench 19mm square SP1156TR, SP-1156TR(3/4SQ) Feature Equipped with a twin regulator mechanism that saves the trouble of power adjustment for forward and reverse rotation. High power output with less vibration due to pin type clutch hammer. For U-bolt attachment / detachment work for medium and large vehicles, engine maintenance, and other general heavy maintenance. * Tightening torque is a guideline. The torque value changes depending on the conditions. specification Capacity Bolt diameter (mm): 22 Socket drive angle (mm): 19 No-load rotation speed (rpm): 4600 Air consumption (m3 / min): 0.8 Hose mounting port: NPT1 / 4 Exhaust: Handle Overall length (mm): 280 Hammer type: Pin clutch method Tightening torque (N ・ m): 1100 Mass (kg): 5.4 Recommended hose inner diameter: 12.7mm Operating air pressure: 0.62MPa

    $423.79

  • SP AIR Impact Wrench 3/8’’Dr - Pistol Composite, SP-7825(3/8SQ)

    SP Air SP AIR Impact Wrench 3/8’’Dr - Pistol Composite, SP-7825(3/8SQ)

    SP AIR Impact Wrench 3/8’’Dr - Pistol Composite, SP-7825(3/8SQ) • Length: 110mm• Capacity: 12mm• Weight: 0.68kg• Air Con: 468L/min Max• Bolt Busting Torque: 110nm• Max Torque: 80nm• Working Torque: 68nm

    $184.85

  • SP AIR drill with built-in regulator 10mm SP1540

    SP Air SP AIR drill with built-in regulator 10mm SP1540

    SP AIR drill with built-in regulator 10mm SP1540 Features Double gear reduction type spindle makes centering easy without shaft shake Can be widely used with a 4-stage air regulator Fine adjustment with vivid throttle Can be used for multiple purposes, from 6 & 8mm spot peeling work to hole drilling work up to 10mm. specification No-load rotation speed (rpm): 3000 Overall length (mm): 180 Hole drilling ability (mm): 10 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.98 Set contents and accessories: Chuck key

    $166.81

  • SP AIR Double action sander 125mmφ dust absorption type SP3905DFA5

    SP Air SP AIR Double action sander 125mmφ dust absorption type SP3905DFA5

    SP AIR Double action sander 125mmφ dust absorption type SP3905DFA5 Features Uses a resin body that is easy to use and has a soft feel that improves work efficiency. Especially suitable for work in cold regions and cold days Low center of gravity design that fits the painted surface Mini size of 125φmm pad that fits comfortably in your hand Built-in air regulator Strong dust absorption type Ideal for finish polishing work especially in narrow spaces such as corners and curved surfaces specification No-load rotation speed (rpm): 11000 Overall length (mm): 132 Pad size (mm): 125 Orbit diameter (mm): 5 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.95

    $303.86

  • SP AIR Impact Driver 6.35mm SP1826H

    SP Air SP AIR Impact Driver 6.35mm SP1826H

    SP AIR Impact Driver 6.35mm SP1826H Features Smooth rotation with single dock clutch hammer mechanism Mini type that fits perfectly in your hand Built-in air regulator For small diameter screw tightening work for automobile sheet metal and general maintenance work specification No-load rotation speed (rpm): 11500 Overall length (mm): 120 Bit insertion angle (mm): 6.35 Screw capacity (mm): 6 Practical torque range (Nm): 7-41 Hose connection (NPT): 1/4 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 Mass (kg): 0.62

    $170.41

  • SP AIR Die grinder 90 ° (angle head type) SP7201

    SP Air SP AIR Die grinder 90 ° (angle head type) SP7201

    SP AIR Die grinder 90 ° (angle head type) SP7201 Features The calculated ergonomic design makes it easy to operate without burdening the operator. Lightweight and compact 90 ° angle head type Rear exhaust type that does not interfere with work Throttle lever with one-touch operation safety stopper Built-in dial type air regulator Please attach various bars and sanding pads according to the application and use it for polishing and grinding work in narrow places. specification Hose intake: NPT1 / 4 Overall length (mm): 160 No-load rotation speed (rpm): 20000 Chuck inner diameter (mm): 6 Air consumption (m3 / min): 0.2 Mass (kg): 0.55 Tip tool: Shaft diameter 6 mm (grinding stone) Exhaust direction: Rear Operating air pressure: 0.62MPa

    $168.61

  • SP AIR C surface small diameter beveler, SP-7252F

    SP Air SP AIR C surface small diameter beveler, SP-7252F

    SP AIR C surface small diameter beveler, SP-7252F Features The minimum machined hole diameter is 6.8 mm. Ideal for chamfering and deburring small diameter bolt holes and long holes. The tip can be used 3 times at different angles. The chip is cooled by the cooling air system, and the durability is improved. Product specifications Specifications / standards Operating air pressure: 0.6MPa No-load rotation speed (min (-1st power)): 23000 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Chamfering ability: 1.5C Chamfer angle (°): 45 Overall length (mm): 112 No-load rotation speed (rpm): 23000

    $457.15

  • SP AIR Die grinder 90 ° (angle head type) SP1200AH

    SP Air SP AIR Die grinder 90 ° (angle head type) SP1200AH

    SP AIR Die grinder 90 ° (angle head type) SP1200AH Features Easy-to-use angle head type. Lightweight, compact and easy to operate in tight spaces with one hand. High-speed rotation with less noise and vibration. (21000 per minute) Front exhaust. A handy type high-speed grinder. Please attach various bars according to the application and use it for finishing. It is ideal for fine correction work such as finishing work on drilled surfaces, chamfering cut surfaces and spot welded surfaces, and correcting various dies. (Collet 6mm) specification No-load rotation speed (rpm): 21000 Overall length (mm): 125 Collet size (mm): 6 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.45

    $144.26

  • SP AIR Belt sander 20mm x 520mm SP1380

    SP Air SP AIR Belt sander 20mm x 520mm SP1380

    SP AIR Belt sander 20mm x 520mm SP1380 Features The angle of the arm can be changed according to the work content. One-touch replacement of the belt. Easy-to-operate throttle lever system. For surface polishing work of all materials such as stainless steel, aluminum, cast iron, wood, plywood, plastic, titanium alloy, bronze. specification Belt speed (m / min): 2580 No-load rotation speed (rpm): 17000 Overall length (mm): 365 Belt size (mm): 20 x 520 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.4

    $303.86

  • SP AIR Die grinder 120 ° (angle head type) SP7202

    SP Air SP AIR Die grinder 120 ° (angle head type) SP7202

    SP AIR Die grinder 120 ° (angle head type) SP7202 Features The calculated ergonomic design makes it easy to operate without burdening the operator. Lightweight and compact 120 ° angle head type Rear exhaust type that does not interfere with work Throttle lever with one-touch operation safety stopper Built-in dial type air regulator Please attach various bars and sanding pads according to the application and use it for polishing and grinding work in narrow places. specification Hose intake: NPT1 / 4 Overall length (mm): 194 No-load rotation speed (rpm): 20000 Chuck inner diameter (mm): 6 Air consumption (m3 / min): 0.2 Mass (kg): 0.56 Tip tool: Shaft diameter 6 mm (grinding stone) Exhaust direction: Rear Operating air pressure: 0.62MPa

    $174.02

  • SP AIR Angle grinder 180mm SP-1261G

    SP Air SP AIR Angle grinder 180mm SP-1261G

    SP AIR Angle grinder 180mm SP-1261G Features It is safe to control the rotation speed with a built-in governor mechanism. The handle can be attached from either the left or right depending on the work. For metal grinding, rust removal, and bead removal work. specification Overall length (mm): 270 Applicable whetstone dimensions Outer diameter x thickness x inner diameter (mm): 180 x 6 x 22 No-load rotation speed (min ^ -1): 7500 Air consumption (m3 / min): 0.8 Hose mounting port: NPT3 / 8 Exhaust: sideways No-load rotation speed (rpm): 7500 Operating air pressure: 0.62MPa Tip tool: Whetstone Exhaust direction: lower right Note: The grindstone is sold separately. Country of origin: Japan

    $418.38

  • SP AIR Angle Sander / Polisher SP7500AHP

    SP Air SP AIR Angle Sander / Polisher SP7500AHP

    SP AIR Angle Sander / Polisher SP7500AHP Features Low center of gravity and good stability Easy to grind at low speed 70φ / 125φ pads can be attached Rear exhaust type that does not interfere with work Color hagi for car body sheet metal work For sanding and polishing work For small area repair work specification No-load rotation speed (rpm): 1800 Air consumption (m3 / min): 0.3 Hose intake: NPT1 / 4 Overall length (mm): 200 Pad size (mm): 70 or 125 Mass (kg): 1.2 Operating air pressure: 0.6MPa Paper used: Magic pad

    $240.74

  • SP AIR Belt Sander 10mm & 12mm × 330mm SP-1370A

    SP Air SP AIR Belt Sander 10mm & 12mm × 330mm SP-1370A

    SP AIR Belt Sander 10mm & 12mm × 330mm SP-1370A Features One-touch belt replacement with the arm stopper. It is easy to replace the idle pulley at the tip. Lightweight and compact, the arm can be angled from straight to 90 ° inward. For sander work in hard-to-reach places such as bumps and dips. specification Belt dimensions (mm): 10/12 x 330 Belt speed (m / min): 1100 No-load rotation speed (min ^ -1): 16000 Air consumption (m3 / min): 0.4 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 275 Working air pressure (MPa): 0.62 No-load rotation speed (rpm): 16000 10 and 12 mm wide belts can be used Country of origin: Japan

    $256.98

  • SP AIR Angle grinder 100mm SP1254G

    SP Air SP AIR Angle grinder 100mm SP1254G

    SP AIR Angle grinder 100mm SP1254G Features It is a left-right handle that can be selected from left and right handles according to the work. Built-in safety governor mechanism to prevent accidents due to excessive speed. For repair work of automobile sheet metal, welding peeling, and ground leveling. For chamfering and deburring of all materials, and other general grinding work. specification No-load rotation speed (rpm): 12000 Overall length (mm): 235 Hose mounting port: NPT1 / 4 Operating air pressure (MPa): 0.62 Whetstone dimensions (mm): 100φ x 15 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.7 Mass (kg): 1.7

    $263.29

  • SP AIR Air shear SP-1710S

    SP Air SP AIR Air shear SP-1710S

    SP AIR Air shear SP-1710S Features Sharp sharpness with steel finish The blade can be re-polished Since it is a 2-flute scissors, it does not produce cutting residue. For general automobile sheet metal cutting work specification Overall length (mm): 270 Cutting capacity (mm): Iron plate 1.2 Aluminum 1.2 Stainless steel 1.0 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.25

    $280.43

  • SP AIR Air File SP-1700F

    SP Air SP AIR Air File SP-1700F

    SP AIR Air File SP-1700F Features A compact and lightweight mini type. A lever with a safety stopper that prevents accidents caused by an unexpected start. For wrapping molds and precision parts. File machined parts, metals and resins specification Air consumption (m3 / min): 0.3 Hose mounting port: NPT1 / 4 Overall length (mm): 180 Operating air pressure (MPa): 0.62 Mounting shaft diameter (mm): 5 Number of strokes (times / minute): 4500 With rubber grip Set contents: 1 round, 1 flat, 1 triangular file, round file, flat file, triangular file Country of origin: Japan

    $237.14

  • SP AIR Air Saw SP-1730

    SP Air SP AIR Air Saw SP-1730

    SP AIR Air Saw SP-1730 Features A lever with a safety stopper that prevents accidents caused by an unexpected start. A combined type that can also be used as a file. For cutting straight lines and curves of steel plates and aluminum plates. For filing machined parts and metal, pottery, resin, etc. with a file. specification Stroke length (mm): 9 Cutting capacity (mm): Iron plate 1.5 Number of strokes (times / minute): 5000 Air consumption (m3 / min): 0.3 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 240 Operating air pressure: 0.62MPa Compatible blade: 32 mountain blade (12.7mm width) With air regulator Set contents: 1 32-mountain blade, 1 round / flat / triangular file included Country of origin: Japan

    $262.39

  • SP AIR Air Hammer Set SP1410K

    SP Air SP AIR Air Hammer Set SP1410K

    SP AIR Air Hammer Set SP1410K Features Uses a hard steel cylinder. Built-in air regulator. Quick change retainer for quick chisel replacement. Attach each chisel to remove rust from mufflers and pipes, cut body panels, and peel off spot welds. specification Overall length (mm): 216 Number of hits (bpm): 3000 With 4 chisels Chisel shaft diameter (mm): 10.2 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.65 Set contents and accessories: With 4 chisel

    $155.09

  • SP AIR Angle grinder 100mm SP1254

    SP Air SP AIR Angle grinder 100mm SP1254

    SP AIR Angle grinder 100mm SP1254 Features A lever with a safety stopper to prevent accidents. It is a left-right handle that can be selected from left and right handles according to the work. Built-in safety governor mechanism to prevent accidents due to excessive speed. For repair work of automobile sheet metal, welding peeling, and ground leveling. For chamfering and deburring of all materials, and other general grinding work. specification No-load rotation speed (rpm): 12000 Overall length (mm): 229 Whetstone dimensions (mm): 100φ x 15 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.7

    $263.29

  • SP AIR 6mm die grinder, SP-7203

    SP Air SP AIR 6mm die grinder, SP-7203

    SP AIR 6mm die grinder, SP-7203 Features High torque / low speed type Lightweight, compact size, with resin cover Built-in air regulator Use For deburring and polishing metal For polishing work that does not want to apply heat to stainless steel, resin, etc. Product specifications Specifications / standards Chuck inner diameter (mm): 6 Overall length (mm): 165 No-load rotation speed (min (-1st power)): 5500 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Exhaust: Rear

    $160.50

  • SP AIR Air Die grinder SP1220

    SP Air SP AIR Air Die grinder SP1220

    SP AIR Air Die grinder SP1220 Features Lightweight, compact and easy to operate even in narrow spaces with one hand. High-speed rotation with less noise and vibration. (23000 per minute) Rear exhaust. A handy type high speed grinder. Please attach various bars according to the application and use it for finishing. It is ideal for fine correction work such as finishing work on drilled surfaces, chamfering cut surfaces and spot welded surfaces, and correcting various dies. (Collet 6mm) specification No-load rotation speed (rpm): 23000 Overall length (mm): 164 Collet size (mm): 6 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.56

    $124.43

  • SP AIR Air Die grinder SP-7200

    SP Air SP AIR Air Die grinder SP-7200

    SP AIR Air Die grinder SP-7200 Features Uses a start lever with a safety stopper. Comes with a regulator dial. For mold correction and deburring of various industrial parts. Ideal for grinding work. specification Chuck inner diameter (mm): 6 Overall length (mm): 153 No-load rotation speed (min ^ -1): 23000 Air consumption (m3 / min): 0.2 Hose mounting port: NPT1 / 4 Exhaust: Rear No-load rotation speed (rpm): 23000 Operating air pressure: 0.62MPa Tip tool: Shaft diameter 6 mm (grinding stone) Exhaust direction: Rear Country of origin: Japan

    $125.33

  • SP AIR Air Die grinder SP1200

    SP Air SP AIR Air Die grinder SP1200

    SP AIR Air Die grinder SP1200 Features Lightweight, compact and easy to operate even in narrow spaces with one hand. High-speed rotation with less noise and vibration. (28000 / min) It is a front exhaust. A handy type high-speed grinder. Please attach various bars according to the application and use it for finishing. Ideal for fine correction work such as finishing work on drilled holes, chamfering cut surfaces and spot welded surfaces, and correcting various dies. (Collet 6mm) specification No-load rotation speed (rpm): 28000 Overall length (mm): 120 Collet size (mm): 6 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.3

    $110.00

  • SP AIR Air drill 13mm (with forward / reverse rotation mechanism) SP1527

    SP Air SP AIR Air drill 13mm (with forward / reverse rotation mechanism) SP1527

    SP AIR Air drill 13mm (with forward / reverse rotation mechanism) SP1527 Features Since it is a handle exhaust, it does not interfere with work Planetary gear type With side handle for a firm grip In addition to general drilling work up to 13 mm, it has a reverse rotation function, so it is suitable for drilling holes in wood etc., and screws can be attached and detached with a screwdriver bit. specification No-load rotation speed (rpm): 500 Overall length (mm): 220 Hole drilling ability (mm): 13 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.58 Set contents and accessories: Chuck key

    $262.39

Login

Forgot your password?

Don't have an account yet?
Create account