LOBSTER

76 products


  • [LOBSTER] Hybrid Adjustable Wrenches UM

    LOBSTER LOBSTER Hybrid Adjustable Wrenches UM

    LOBSTER Hybrid Adjustable Wrenches UM LOBSTER originated adjustable angle wrench, featuring "thin" and "lightweight" designAdjustable angle wrench featuring "Thin", "Wide" and "Lightweight" design◎ All of LOBTEX adjustable angle wrenches are made in Japan, and can be reliably and safely used.Use / ApplicationApplication: Tightening and loosening nuts and bolts● Thin: The thin body can smoothly fit the palm, so the tool can be safely used even in cramped spaces.    Upper: Hybrid adjustable wrench (UM36)Lower: Powerful adjustable wrench (M300) The hybrid adjustable wrench is thinner, when compared with the same jaw opening width. ● Wide:   The jaw opening is wider than that of conventional adjustable wrenches.Left: Conventional powerful adjustable wrench (M300)Right: Hybrid adjustable wrench (UM36)  ● Lightweight: Approx. 60% weight reduction, in comparison with our powerful adjustable wrenchesOverall size comparison between hybrid adjustable wrench (UM36) and conventional adjustable wrench (M300) Despite the same jaw opening width, the hybrid adjustable wrench is compact. However, it provides sufficient torque, causing no problems in use.  * The hybrid adjustable wrench provides higher rigidity than the safety standard prescribed in JIS (Japan Industrial Standard), thus ensuring safety during use.  Specifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension 215-0415 UM24 90g 150mm 5mm 9.5mm 0~24mm M16 215-0424 UM30 170g 200mm 6mm 12.0mm 0~30mm M20 215-0433 UM36 290g 245mm 7mm 14.0mm 0~36mm M24 215-0442 UM46 560g 300mm 8mm 16.5mm 0~46mm M30 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useAdjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Plastic Nippers 2726S | 215-0585

    LOBSTER LOBSTER Plastic Nippers 2726S

    LOBSTER Plastic Nippers 2726S  Specifications Product Code. Model No.  weight size1 Remark 215-0585 2726S 135g 150mm Cutting capacity/Plastic:φ5.0 ※① of a table is full length IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hybrid Adjustable Wrench, Cushion Grip UM

    LOBSTER LOBSTER Hybrid Adjustable Wrench, Cushion Grip UM

    LOBSTER Hybrid Adjustable Wrench, Cushion Grip UM • A warm look has been added to our hybrid adjustable angle wrenches. (6 colors 4 sizes)Gentle touch has a soothing effect.• Useful for worksite tool managementUse / Application• Tightening and loosening nuts and boltsSpecifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension 215-0451 UM24 90g 150mm 5mm 9.5mm 0~24mm M16 215-0460 UM30 170g 200mm 6mm 12.0mm 0~30mm M20 215-0479 UM36 300g 245mm 7mm 14.0mm 0~36mm M24 215-0488 UM46 580g 300mm 8mm 16.5mm 0~46mm M30 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Adjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] DIAGONAL CUTTING PLIERS 2706 | 215-0512

    LOBSTER LOBSTER Diagonal Cutting Pliers 2706

    LOBSTER DIAGONAL CUTTING PLIERS 2706  Specifications Product Code Model No. (Product) weight size1 Remark 215-0512 2706 150g 150mm Cutthing capacity ①Iron wire:φ1.8 ②Copper wire:φ2.6 ※① of a table is full length.  ! IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Pocket-sized Adjustable Wrenches UM-S

    LOBSTER LOBSTER Pocket-sized Adjustable Wrenches UM-S

    LOBSTER Pocket-sized Adjustable Wrenches UM-S • The pocket / palm-sized tool is useful for work in a complicated cramped space.• This palm-sized short adjustable wrench with lightweight and thin body features a wide jaw opening and skeleton grip. A useful scale is provided.• Width across flats of UM48S: Up to 48 mmUse / Application• Tightening and loosening nuts and boltsSpecifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension 215-0372 UM24SS 80g 118mm 5mm 9.5mm 0~24mm M16 215-0381 UM30SS 140g 140mm 6mm 12.0mm 0~30mm M20 215-0390 UM36SS 235g 160mm 7mm 14.0mm 0~36mm M24 215-0406 UM48SS 440g 185mm 8mm 16.5mm 0~48mm M30 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Adjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Micro nippers MN110 | 215-0503

    LOBSTER LOBSTER Micro nippers MN110

    LOBSTER Micro nippers MN110  • Useful for precision work, hobbies, etc.• Equipped with a spring that facilitates continuous use.• For cutting steel wires (soft wire)Specifications  Product Code Model No. weight size1 size2 215-0503 MN110 65g 109mm(with spring) 11.0mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm directions of cut chips.During work, wear protective goggles.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Crimping tool AK15A | 215-0026

    LOBSTER LOBSTER Crimping tool AK15A

    Crimping tool AK15A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • Smooth handle operation• Forming check mechanism incorporated into the body. Smart collar design.• Handle is narrower than conventional models. (Approx. 20 mm when opened.) Handle is easily operated with one hand while holding the terminal with the other.Use / Application• For non-insulated terminals for copper wire.For non-insulated sleeves (P-B) for copper wire.Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-0026 AK15A 400g 256mm 82mm 1.25、2、5.5、8㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Angled tip long-nose pliers ROPROSS RP150B | 215-4518

    LOBSTER LOBSTER Angled tip long-nose pliers ROPROSS RP150B

    LOBSTER Angled tip long-nose pliers ROPROSS RP150B  • These angled tip long-nose pliers are useful for work in cramped spaces. LOBTEX drastically changed the tip angle to point sideways.• Thanks to the direction and angle (30 °) of the tip, ROPROSS can easily grip the target objects even in the cramped spaces where conventional pliers can not be opened laterally.Specifications Product Code. Model No. weight size1 size2 size3 Remark 215-4518 RP150B 120g 157mm 10mm 40.5mm Cutting capacity/①Iron wire:φ1.5 ②Copper wire:φ2.6 ※① of a table is IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm directions of cut chips.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Side-Cutting Pliers 2508CP | 215-0567

    LOBSTER LOBSTER Side-Cutting Pliers 2508CP

    LOBSTER Side-Cutting Pliers 2508CP Specifications Product Code. Model No. weight size1 Remark 215-0567 2508CP 348g 200mm Cutting capacity ①Iron wire:φ2.0 ②Copper wire:φ2.4 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Mini Crimping Tool AK25MA | 215-0062

    LOBSTER LOBSTER Mini Crimping Tool AK25MA

    Mini crimping tool AK25MA For closed end insulated connectors • Pocket-sized tool, featuring lightweight and compact design that fits hands.• Small body and powerful crimping!• Convenient to carry, Suitable for small work• Works great with frequently used connection terminal sizes.• Smart collar design. Forming check mechanism incorporated into the body.Use / Application• For closed end insulated connectorsSpecifications  Product Code. Model No. (Product) weight size1 size2 Use range 215-0062 AK25MA 285g 194mm 63mm CE1、2、5 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

    $113.32

  • [LOBSTER] Heavy duty crimping tool AK60 / AK100

    LOBSTER LOBSTER Heavy Duty Crimping Tool AK60 / AK100

    LOBSTER Heavy Duty Crimping Tool AK60 / AK100 • Easily crimps various sizes by simply turning rotary female dies.Use / Application• Equipped with easy-to-use adjusting dial for matching force to user's strengthSpecifications   Product Code. Model No. weight size1 Use range 215-0187 AK60 3100g 710mm 14、22、38、60㎜2 215-0196 AK100 3500g 695mm 22、38、60、80、100㎜2 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

    $276.44

  • [LOBSTER] Hand Riveter HR002D | 215-0725

    LOBSTER LOBSTER Hand Riveter HR002D

    LOBSTER Hand Riveter HR002D  · The easy-to-use hand Riveter· Overcomes drawbacks of conventional hand riveters by holding the rivet firmly regardless of tool position.· Special palm and hand grip for ease and comfort.· Comes with four nosepieces to set rivets up to 4.8mm (3/16 ").Specifications Product Code Model No. (Product) weight size1 size2 size3 size4 Use range Usage jaws Remark 215-0725 HR002D 500g 273mm 83mm 20mm 20mm φ2.4・3.2・4.0・4.8mm Small ※Cannot be used with φ4.8mm stainless steel blind rivets. IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hand Nut Rivet Setter HND005 | 215-0789

    LOBSTER LOBSTER Hand Nut Rivet Setter HND005

    LOBSTER Hand Nut Rivet Setter HND005  · Aluminum diecast frame and hardened chrome-vanadium steel handleBalanced spinning mechanism· Suitable for downward, horizontal or overhead installation of nut rivets· Comes with four nosepieces, sizes # 4, # 6, # 8, and # 10, or M3, M4, M5 and M6· A complete kit with assorted rivets is also available: HND-105Specifications Product Code. Model No. weight size1 size2 size3 size4 Use range Remark 215-0789 HND005 650g 270mm 131mm 33mm 22mm Steel(M3,M4,M5)・Aluminum(M4,M5,M6)・Stainless steel(M3,M4) Heavy Duty IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Wire stripper LC55 | 215-0293

    LOBSTER LOBSTER Wire stripper LC55

    LOBSTER Wire stripper LC55  • Enabling easy stripping of various sizes of vinyl cable by turning the adjuster screw (equipped with indicator).• Sharp cutter included.Use / Application• Cable unsheathingSpecifications Product Code. Model No.  weight size1 Use range 215-0293 LS55 220g 170mm 0.1~5.5㎜2 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Adjust the stripping cutter blade properly to prevent core wire break. Wire breaks may cause power supply failures and fire.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Welding Pliers ZP-210WEL | 215-7825

    LOBSTER LOBSTER Welding Pliers ZP-210WEL

    LOBSTER brand welding pliers (For CO2 welding torches only) Worldwide requisite tool for CO2 welding!Eight functions are available with this single tool.· Enables sharp cutting of welding wire (including stainless steel).· Since induction hardening is applied to special steel, high cutting performance can be maintained.· Eliminates spatter that affects welding quality.· Can grip each parts of torchSpring mechanism improves work efficiency.Use / Application· Wire drawing (Long-nose pliers function)· Wire cutting (Applicable to both iron and stainless steel)· Eliminating spatter inside and outside of the nozzle· Eliminating spatter from nozzle tip· Hammer function for eliminating spatter· Nozzle attaching / detaching· Tip attaching / detaching· Insulation cylinder attaching / detaching【Functional description】 Specifications Product Code. Model No. weight size1 size2 size3 size4 size5 Remark 215-7825 ZP210WEL 275g 212mm 11mm 4mm 7mm 45mm Cutting capacity(welding wire, iron, stainless steel CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Water Pump Pliers WP200H | 215-6118

    LOBSTER LOBSTER Water Pump Pliers WP200H

    LOBSTER Water Pump Pliers WP200H  Extremely useful for piping work in cramped spaces.Owing to the efficient mechanism, this tool ensures smooth operation and high durability.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications  Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-6118 WP200H 200g 196mm 8.0mm 26mm 0~33mm  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. ※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Water Pump Pliers With Spring WP250S | 215-0646

    LOBSTER LOBSTER Water Pump Pliers With Spring WP250S

    LOBSTER Water Pump Pliers With Spring WP250S  • The handle automatically opens by spring force.• For piping work• For plumbing (tap water faucet, etc.)• The arched (round) teeth securely grip objects of any shape. This tool is especially powerful for the pipe and rod, as it can grip the larger sized objects than straight shapes.• The jaw opening width is adjustable in 8 steps at 5 mm intervals. The handle width is suitable for gripping all types of objects easily.• As a safety mechanism to prevent joint slippage during use, a powerful spring is incorporated.Use / Application• Tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications  Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-0646 WP250S 350g 257mm 10.0mm 36mm 0~46mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Water Pump Pliers With Screwdriver ANGUIRUS WP250ND | 215-0655

    LOBSTER LOBSTER Water Pump Pliers With Screwdriver ANGUIRUS WP250ND

    LOBSTER Water Pump Pliers With Screwdriver ANGUIRUS WP250ND  • For piping work• For plumbing (tap water faucet, etc.)• With a jaw opening width adjustable in 5 steps, this tool is suitable for plumbing. The 150-mm screwdriver can be attached to the grip with a higher torque than conventional screwdrivers, and is useful for removing rusted or hard-tightened screws. Special heat treatment is applied to special steel, which can serve as a prying bar.• ANGUIRUS is a registered trademark of LOBTEX Co., Ltd. Use / Application• For tightening and removing nuts and bolts• For tightening / removing screws with the screwdriver• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-0655 WP250ND 350g 252mm 10.0mm 36mm 0~47mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useBefore using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Be careful not to damage your hands or body with the screwdriver at the end of the handle.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Water Pump Pliers type WP250DNA | 215-5146

    LOBSTER LOBSTER Water Pump Pliers type WP250DNA

    LOBSTER Water Pump Pliers type WP250DNA  A machine screw removal function has been added to the ANGUIRUS with handy screwdriver.• Tightening and removing rusted screws, head-crushed screws and special screws• For piping work• For plumbing (tap water faucet, etc.)• Tightening and removing nuts and bolts• For tightening / removing screws with the screwdriver• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 The outside diameter of the pipe grabbed (A display) 215-5146 WP250DNA 360g 252mm 10mm 0~47mm This tool is useful for removing head-crushed screws, deformed screws, etc Round-shaped object (pipe, etc.) can be easily gripped A slotted screwdriver is provided at the end of the grip.  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Water Pump Pliers

    LOBSTER LOBSTER Water Pump Pliers

    LOBSTER Water Pump Pliers Extremely useful for piping work in cramped spaces.Owing to the efficient mechanism, this tool ensures smooth operation and high durability.Use / ApplicationThis tool excels at various plumbing jobs, as well as tightening and removing nuts and bolts; opening and closing stoppers and bottle lids; and for twisting, bending and pulling wire.Specifications  Product Code. Model No. weight size1 215-0628 2310P 380g 250mm 215-0637 2312P 600g 300mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Tri-grip plier type TG-200NA | 215-5155

    LOBSTER LOBSTER Tri-grip plier type TG-200NA

    LOBSTER Tri-grip plier type TG-200NA  • A machine screw removal function is added to the LOBSTER original pliers featuring three-point support (tri-grip).• A flat shaft nut is used for both sides. The flu has a special asymmetric shape.• Tightening and removing rusted screws, head-crushed screws and special screws• For piping work, etc.• Tightening and removing nuts and bolts• Cutting, twisting, bending and tensioning steel wires• Bending steel plates, etc.Specifications Product Code. Model No. weight size1 size2 size3 215-5155 TG200NA 250g 203mm 11mm 46.0mm This tool can vertically pry and remove rusted or deformed screws. Owing to the special shape for 3-point support, this tool can stably grip round objects (copper pipe, etc.).IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useBefore using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Be careful not to damage your hands or body with the screwdriver at the end of the handle.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Side-Cutting Pliers 2508 | 215-0558

    LOBSTER LOBSTER Side-Cutting Pliers 2508

    LOBSTER  Side-Cutting Pliers 2508  Specifications Product Code. Model No. weight size1 Remark 215-0558 2508 350g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Side-Cutting Pliers

    LOBSTER LOBSTER Side-Cutting Pliers

    [LOBSTER] Side-Cutting PliersSpecifications Product Code. Model No. weight size1 Remark 215-0530 2506P 210g 150mm Cutting capacity ①Iron wire:φ2.0 ②Copper wire:φ2.4 ※① of a table is full length. 215-0549 2508P 365g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Screw Pliers "Neji-Anguirus NA175 | 215-5173

    LOBSTER LOBSTER Screw Pliers "Neji-Anguirus NA175

    LOBSTER Screw Pliers "Neji-Anguirus NA175  • Tightening and removing rusted screws, head-crushed screws and special screws• Standard tools for removing machine screws.• It serves as pliers, too.Specifications Product Code. Model No. weight size1 size2 215-5173 NA175 150g 170mm 9mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not infect target objects unstably. Otherwise, the tool may slip, causing your fingers to be caught in the tool.During work, wear protective goggles.Do not use this tool as a substitute for a hammer.Do not apply impact to this tool by hitting it with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Popular and long-selling L-type Clamp BP

    LOBSTER LOBSTER Popular and long-selling L-type Clamp BP

    LOBSTER Popular and long-selling L-type Clamp BP Popular and long-selling L-type LOBSTER clamp• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materials Specifications Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-1025 BP3017 5100g 300mm 174mm 440mm φ45mm 20mm 39.4mm 215-1034 BP4017 5600g 400mm 174mm 540mm φ45mm 20mm 39.4mm 215-1043 BP6017 6600g 600mm 174mm 740mm φ45mm 20mm 39.4mm 215-1052 BP8017 7600g 800mm 174mm 940mm φ45mm 20mm 39.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this clamp as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this clamp by hitting it with a hammer, etc.Do not extend this clamp with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

    $197.32

  • [LOBSTER] Popular and long-selling L-type Clamp BH

    LOBSTER LOBSTER Popular and long-selling L-type Clamp BH

    LOBSTER Popular and long-selling L-type Clamp BH Popular and long-selling L-type LOBSTER clamp• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materials Specifications Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-1070 BH2012 2400g 200mm 119mm 315mm φ38mm 15mm 29.4mm 215-1089 BH2512 2500g 250mm 119mm 365mm φ38mm 15mm 29.4mm 215-1098 BH3012 2600g 300mm 119mm 415mm φ38mm 15mm 29.4mm 215-1104 BH4012 2900g 400mm 119mm 515mm φ38mm 15mm 29.4mm 215-1113 BH6012 3500g 600mm 119mm 715mm φ38mm 15mm 29.4mm 215-1122 BH8012 4100g 800mm 119mm 915mm φ38mm 15mm 29.4mm 215-1131 BH10012 4700g 1000mm 119mm 1115mm φ38mm 15mm 29.4mm 215-1140 BH12012 5300g 1200mm 119mm 1315mm φ38mm 15mm 29.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this clamp as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this clamp by hitting it with a hammer, etc.Do not extend this clamp with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

    $100.61

  • [LOBSTER] Popular and long-selling L-type Clamp

    LOBSTER LOBSTER Popular and long-selling L-type Clamp

    LOBSTER Popular and long-selling L-type Clamp Popular and long-selling L-type LOBSTER clamp• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materials Specifications Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-0956 BM1010 1000g 100mm 101mm 180mm φ32mm 10.4mm 21.4mm 215-0965 BM1510 1100g 150mm 101mm 230mm φ32mm 10.4mm 21.4mm 215-0974 BM2010 1200g 200mm 101mm 280mm φ32mm 10.4mm 21.4mm 215-0983 BM2512 1300g 250mm 121mm 330mm φ32mm 10.4mm 21.4mm 215-0992 BM3012 1400g 300mm 121mm 380mm φ32mm 10.4mm 21.4mm 215-7481 BM3512 1500g 350mm 121mm 430mm φ32mm 10.4mm 21.4mm 215-1016 BM4012 1600g 400mm 121mm 480mm φ32mm 10.4mm 21.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this clamp as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this clamp by hitting it with a hammer, etc.Do not extend this clamp with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] NEJIANGUIRUS, Vise Pliers Type VW-NA

    LOBSTER LOBSTER NEJIANGUIRUS, Vise Pliers Type VW-NA

    LOBSTER NEJIANGUIRUS, Vise Pliers Type VW-NA A screw removal function has been added to handy vise-grip pliers that can turn a screw while holding it.• For tightening and removing rusted screws, head-crushed screws and special screws• For clamping round objects (pipe, etc.).• For cutting steel wiresSpecifications Product Code. Model No. weight size1 size2 Jaw Capacity 215-5164 VW125NA 165g 144mm 8.0mm 28mm 215-5234 VW175NA 345g 188mm 8.8mm 40mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool as a sling gear.Do not use this clamp for connecting scaffolding.During work, wear protective goggles.When releasing or unlocking the handle, be careful not to pinch your hands with the unlock lever.Do not apply impact to this tool by hitting it with a hammer, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Multi type Mini Crimping tool AK-M2 | 215-6181

    LOBSTER LOBSTER Multi type Mini Crimping tool AK-M2

    LOBSTER Multi type Mini Crimping tool AK-M2  2 in 1 crimping tool for non-insulated terminals / sleeves and insulated terminals / sleeves!· Compared with conventional model, about 40% less load at the handle portion (* 1) when tested by non-insulated terminals.(* 1) Before unlock ratchet mechanism· Excellent layout of jaws to avoid misuseIntegrated ratchet mechanism· Elastomer grips fit in your hand· Can temporarily hold terminals by single hand Product Code. Model No. (Product) weight size1 size2 Use range Remark 215-6181 AKM2 345g 218mm 66mm ①0.3・0.5・1.25・2 ②1.25・2(㎜2) ①Insulated terminals/sleeves ②Non-insulated terminals   IMPORTANT SAFETY INSTRUCTIONS· Do not crimp or work nearby live wires.· Use this tool properly with compatible cable connectors (Terminals / Sleeves) and cables· To prevent crimping failure and to ensure crimping performance, the tool should be periodical (once or twice a year) inspected by Lobtex· Lubricate moving parts of tool once or twice a month. Otherwise, may cause crimping failure due to friction· The holes have no adequate strength. Do not use it as anti-dropping purpose.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

    $136.75

  • [LOBSTER] Multi type Mini Crimping tool AK-M1 | 215-6109

    LOBSTER LOBSTER Multi type Mini Crimping tool AK-M1

    LOBSTER Multi type Mini Crimping tool AK-M1  2 in 1 crimping tool for Non-insulated terminals/sleeves and for Closed end insulated connectors!・Compared with conventional model, about 20% less in load at the handle portion when tested by CE5・Excellent layout of jaws to avoid misuse (For Non-insulated terminals/sleeves on once side, and for Closed end on another side)・Integrated ratchet mechanism・Elastomer grips fit in your hand・Can temporarily hold terminals by single hand Product Code. Model No. (Product) weight size1 size2 Use range Remark 215-6109 AKM1 325g 214mm 66mm ①CE1・CE2・CE5 ②1.25・2(㎜2) ①Closed end insulated connectors, ②Non-insulated terminals/sleeves   IMPORTANT SAFETY INSTRUCTIONS· Do not crimp or work nearby live wires.· Use this tool properly with compatible cable connectors (Terminals / Sleeves) and cables· To prevent crimping failure and to ensure crimping performance, the tool should be periodical (once or twice a year) inspected by Lobtex· Lubricate moving parts of tool once or twice a month. Otherwise, may cause crimping failure due to friction· The holes have no adequate strength. Do not use it as anti-dropping purpose.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

    $124.06

  • [LOBSTER] Motor Wrenches MT280 | 215-0497

    LOBSTER LOBSTER Motor Wrenches MT280

    LOBSTER Motor Wrenches MT280  • Enables smooth jaw opening adjustment up to 70 mm• The jaw can tighten nuts made of soft materials (copper, brass, etc.) without damaging the material.Use / Application• Tightening and loosening nuts and boltsSpecifications  Product Code. Model No. weight size1 size2 size3 Jaw Capacity 215-0497 MT280 630g 284mm 9.4mm 71mm 0~70mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useAdjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Modular Crimping Tool MK-86 | 215-7834

    LOBSTER LOBSTER Modular Crimping Tool MK-86

    LOBSTER Modular Crimping Tool MK-86  Suitable for LAN / telephone indoor wiring.Enables cable cutting, stripping and crimping with a single tool.With a ratchet mechanism, this tool ensures simple and secure crimping work.· This tool is easy to use, because all types of work can be done from the front side.Use / Application· Applicable to modular plugs 8P8C (RJ45), 6P6C / 4C / 2C (RJ11 / RJ12).A safety cover is provided for the cutting area.· This tool is equipped with a round cable stripping guide (applicable outer diameter: φ5 to 5.5).· When the ratchet is released, both right and left arm are separated, making it easy to insert cables into the cutting area. Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-7834 MK86 345g 205mm 65mm modular plugs 8P8C(RJ45)、6P6C・6P4C・6P2C(RJ11・RJ12)   IMPORTANT SAFETY INSTRUCTIONS· Spare blades (for cutting and stripping) are sold separately.Do not use modular plugs or cables.· This tool may not be applicable to the original extension plugs or the like.· Apply oil to sliding parts of the tool about once or twice a month. If this tool is used without sufficient oil, the shaft will wear down remarkably, causing crimping failure.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Mini WIre Cutter MC210N | 215-0673

    LOBSTER LOBSTER Mini WIre Cutter MC210N

    LOBSTER Mini WIre Cutter MC210N  Specifications Product Code. Model No. weight size1 215-0673 MC210N 310g 210mm IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Mini crimping tool AK2MA | 215-3980

    LOBSTER LOBSTER Mini Crimping Tool AK2MA

    Mini crimping tool AK2MA For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • Pocket-sized tool, featuring lightweight and compact design that fits hands.• Small body and powerful crimping• Handle weight has been reduced by approx. 50%. (for 2 sq., compared to earlier models)• Smart collar design. Forming check mechanism incorporated into the body.• The tool is easier to use with the extended release upward.Use / Application• For non-insulated terminals for copper wire.• For non-insulated sleeves (P-B) for copper wire.   Product Code. Model No. (Product) weight size1 size2 Use range 215-3980 AK2MA 260g 172mm 54mm 0.3、0.5、1.25、2、3.5、5.5㎜2 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Mini crimping tool AK1MA | 215-0017

    LOBSTER LOBSTER Mini Crimping Tool AK1MA

    Mini crimping tool AK1MA For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. Mini crimping tool AK1MA For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire.• Pocket-sized tool, featuring lightweight and compact design that fits hands.• Small body and powerful crimping• Handle weight has been reduced by approx. 50%. (for 2 sq., compared to earlier models)• Smart collar design. Forming check mechanism incorporated into the body.• The tool is easier to use with the extended release upward.Use / Application• For non-insulated terminals for copper wire.• For non-insulated sleeves (P-B) for copper wire. Product Code. Model No. (Product) weight size1 size2 Use range 215-0017 AK1MA 250g 166mm 54mm 1.25、2㎜2 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice. 

  • [LOBSTER] Mini crimping tool AK112MA | 215-4882

    LOBSTER LOBSTER Mini crimping tool AK112MA

    Mini crimping tool AK112MA For insulated terminals and insulated sleeves • Pocket-sized tool, featuring lightweight and compact design that fits hands• Small body and powerful crimping• Applicable to six sizes of terminals, covering wide range• Smart collar design. Forming check mechanism incorporated into the body.Use / Application• For insulated terminals and insulated sleevesSpecifications Product Code. Model No.  weight size1 size2 Use range 215-4882 AK112MA 365g 213mm 66mm 0.3、0.5、1.25、2、3.5、5.5㎜2 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

    $132.85

  • [LOBSTER] Long-Nose Plies 2606 | 215-0521

    LOBSTER LOBSTER Long-Nose Pliers 2606

    LOBSTER Long-Nose Pliers 2606  Specifications Product Code. Model No. weight size1 Remark 215-0521 2606 130g 150mm Cutting capacity ①Iron wire:φ1.6 ②Copper wire:φ2.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • LOBSTER L-type Clamp For Wood Work

    LOBSTER LOBSTER L-type Clamp For Wood Work

    LOBSTER L-type Clamp For Wood Work  • The grip handle is easy and efficient tightening work.• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materialsSpecifications  Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-0947 WM3012 1400g 300mm 121mm 380mm φ32mm 10.4mm 21.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this tool by hitting it with a hammer, etc.Do not extend this tool with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

    $102.56

  • [LOBSTER] Hydraulic puncher

    LOBSTER LOBSTER Hydraulic puncher

    LOBSTER Hydraulic puncher • Hydraulic puncher• Enables smooth punching work in 18 steps ( 17.5 mm to  115.5 mm). Applicable to thin plate and soft steel plate of 3.2 mm thickness (stainless steel thickness 1.6 mm) after replacing the punch die.• Light 2.6 kg body and 20 kgf handle load enable easy punching work.Use / Application• Construction work (Electricity, tap water, gas, etc.)• Piping workSheet metal work and power distribution panels• Punching holes for mounting parts in control panelsSpecifications Product Code Model No. weight Set details 215-0266 LP104BP 7400g H150P、SP104、PSL、PSS、PSPL、PSPS、B16、B22、B28、B36、B42、B54 215-0275 PSS 150g A15~A25、B16 215-0284 PSL 270g A31~A75、B22~B104   Shaft for LOBSTER puncherIMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not operate the handle while touching the punch dies.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hydraulic Crimping Tool AKH60N

    LOBSTER LOBSTER Hydraulic Crimping Tool AKH60N

    LOBSTER Hydraulic Crimping Tool AKH60N • Lightweight compact type (Overall length: 360 mm, Weight: 2 kg)• Equipped with auxiliary lever, enabling easy and quick crimping with one handUse / Application• Quick crimping, applicable to up to 60 sq.Specifications Product Code. Model No. weight size1 Use range 215-0202 AKH60N 2000g 360mm 14、22、38、60㎜2 215-4855 AKH60N Dies 14~38 SQ 215-4864 AKH60N Dies 60 SQ IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hydraulic Crimping Tool AKH150S

    LOBSTER LOBSTER Hydraulic Crimping Tool AKH150S

    LOBSTER Hydraulic Crimping Tool AKH150S • Terminals can be held and crimped quickly in 1 or 2 squeezes of the handle. Return speed is only 3 seconds.Use / Application• Equipped with fast feed mechanismSpecifications  Product Code. Model No. weight size1 Use range 215-0211 AKH-150S(14-150SQ), 4300g 500mm 14、22、38、60、70、80、100、150㎜2 215-0220  Dies  AKH-150(14SQ), 215-0239  Dies  AKH-150(22SQ), 215-0248  Dies  AKH-150(38/60/70SQ), 215-0257  Dies  AKH-150(80/100/150SQ), IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hybrid Water Pump pliers UU4150 | 215-0664

    LOBSTER LOBSTER Hybrid Water Pump pliers UU4150

    LOBSTER Hybrid Water Pump pliers UU4150  • The jaw opening varies in 6 steps at irregular pitches that accommodate pipe standards. The handle opening stays the same for the most part, regardless of the target workpiece size.• Owing to the 3-point support structure and deformed tooth profile, this tool can securely work with the grip.• Safety design (with stopper) to prevent hands being caught in the handle.• Applicable to nuts up to 41 mm in width across flats (M27), up to 50 mm pipe / round rod, and 3/8 stud bolts.• Lightweight design: Only 280 g (approx. 30 g weight reduction in comparison with our conventional models)• New profile that does not cause damage to the head of nuts.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 size4 size5 Bolt, nut maximum dimension 215-0664 UU4150 280g 226mm 9.0mm 43mm 52mm 50mm M27 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Handheld Diamond Dresser SHD001 | 215-0363

    LOBSTER LOBSTER Handheld Diamond Dresser SHD001

    LOBSTER Handheld Diamond Dresser SHD001  · Handheld dresser used for dressing, edge making and truing of grinding wheels of double-sided grinders· Dressing is enabled with little force.· Since the hand dresser emits little sparks and noise, the work environment can be improved.Use / Application* How to use the toolWith the type of parallel to the grinding wheel surface, slide it laterally.(Do not press the tip against the grinding wheel. Doing so will cause the tip and grinding wheel to wear down early, and also a hazard. 38 or larger in width) or a grinding wheel with high grain density accelerates wear in the tip.Specifications Product Code. Model No. weight size1 size2 size3 size4 size5 215-0363 SHD001 245g 250mm 34mm 22.0mm 7.0mm 4.5mm IMPORTANT SAFETY INSTRUCTIONS◆ Precaution for useBefore using this product, be sure to read the instruction manual included with the product, instructions indicated on the case and the operation manual for the machine being used, to understand the contents thoroughly.During work, be sure to wear protective gear (dust-proof goggles, safety shoes and protective caps).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hand Riveter HR300 | 215-0743

    LOBSTER LOBSTER Hand Riveter HR300

    LOBSTER Hand Riveter HR300 · It is an economic home-use hand.Use / ApplicationUse range: NSA (Rivet: Alminium, Mandrel: steel) 2.4, 3.2, 4.0, 4.8 mm  NA (Rivet: Alminium, Mandrel: Alminium)? 2.4, 3.2, 4.0, 4.8 mm  NS (Rivet: Steel, Mandrel: Steel) φ2.4, 3.2mmSpecifications Product Code. Model No. weight size1 size2 size3 size4 Remark 215-0734 HR300 600g 260mm 85mm 40mm 18mm Use range:NSA φ2.4,3.2,4.0,4.8mm IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hand Riveter HR2050H | 215-0770

    LOBSTER LOBSTER Hand Riveter HR2050H

    LOBSTER Hand Riveter HR2050H  Longer handles and gear mechanism exert greater rivet break power· Φ4.8,6.4mm blind rivets in all materials can be used.* With the included S-bolt nosepiece, S-bolt can be set.Specifications Product Code. Model No. weight size1 size2 size3 size4 Usage jaws Remark 215-0770 HR2050H 1.750g 535mm 37mm 33mm 24mm Large ・Heavy Duty ・Use Range:φ4.8,6.4mm ※Can be used with φ2.4,3.2,4.0mm blind rivets if optional parts(separately sold)are attached  IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

    $324.30

  • [LOBSTER] Hand Riveter HR003B | 215-0761

    LOBSTER LOBSTER Hand Riveter HR003B

    LOBSTER Hand Riveter HR003B  · Longer handles and gear mechanism exert greater rivet break power.* With optional parts (sold separately), HR-003B can set S-bolt.Specifications Product Code. Model No. weight size1 size2 size3 size4 Use range Usage jaws Remark 215-0761 HR003B 2.000g 760mm 95mm 41mm 25mm φ4.8・6.4mm Large Heavy Duty IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

    $321.37

  • [LOBSTER] Hand Riveter HR002A | 215-0734

    LOBSTER LOBSTER Hand Riveter HR002A

    LOBSTER Hand Riveter HR002A  · It is a hand Riveter with general configuration.• Aluminum die cast frame and drop-forged chrome-vanadium steel lever handle• Wide, self-opening spring for regriping• Automatic mandrel ejection• Comes with four nosepieces to set rivets up to 3/16 "• International designSpecifications Product Code. Model No. weight size1 Set details Use range Usage jaws 215-0734 HR002A 550g 265mm ※Cannot be used with φ4.8mm stainless steel blind rivets. φ2.4・3.2・4.0・4.8mm Small IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

  • [LOBSTER] Hand Nut Rivet Setter HN010 | 215-0798

    LOBSTER LOBSTER Hand Nut Rivet Setter HN010

    LOBSTER Hand Nut Rivet Setter HN010 It is powerful hand nutter which can be used for the blind-nut with M10 size.Use / Application· 8 M ~ 10 M of blind-nuts,Specifications Product Code. Model No.  weight size1 size2 size3 size4 Use range 215-0798 HN010 1960g 455mm 35mm 60mm 30mm M5、M6、M8、M10 IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

    $525.53

Login

Forgot your password?

Don't have an account yet?
Create account