KANZAWA

KANZAWA K-801-2 Drill Guide With 13 mm Chuck Tough is different from the average body! Aluminum die cast drill guide with 13 mm chuck. Vertical 45-degree inclined holes can be drilled accurately. A central V-shaped block can be used to drill holes in the center of pipes and bars. It can also be used for center drilling of lumber if a guide rod is used. By setting the position of the stopper ring, you can adjust the depth of the hole.   【specification】 Main material Aluminum die cast steel full length 350 mm stroke 220 mm weight Approximately 1.65 kgs Shank shape Three-sided shaft 10 mm Chuck capacity 13 mm accessories Chuck key      

Read more less

KANZAWA K-801 Drill Guide With 10 mm Chuck Tough is different from the average body! Aluminum die cast drill guide with 10 mm chuck. Vertical 45-degree inclined holes can be drilled accurately. A central V-shaped block can be used to drill holes in the center of pipes and bars. It can also be used for center drilling of lumber if a guide rod is used. By setting the position of the stopper ring, you can adjust the depth of the hole   【specification】 Main material Aluminum die cast steel full length 260 mm stroke 130 mm weight Approximately 1.4 kgs Shank shape Three-sided shaft 10 mm Chuck capacity 10 mm accessories Chuck key      

Read more less

KANZAWA K-330 Packing Cutter K-330 Packing Cutter It is a handy cutter that can adjust packings and gaskets of various widths by adjusting two blades. It can also be used as a drilling tool for thin veneers etc. The blade is a sharp blade polished by a craftsman one at a time, and the handle is a warm wooden. The adjustment of the blade can be done by loosening the prick screw and sliding the dial plate without using any tools.   【specification】 Material (blade) Stainless steel SUS420 Drilling range 30 30 to 300 mm Packing creation range 15 15 to 135 mm  Main applicable material and drilling depth  　Rubber board, carpet, soft vinyl, etc. Up to 10 mm, 　veneer board up to 3 mm   [Optional parts] Product number Item name K-330-B Packing cutter replacement blade (1 sheet)  

Read more less

KANZAWA K-713 Scraper M-1 A thin and small blade, it is a hand-disc rapper perfect for fine peeling work. The design is thick and uneven, so you can do powerful work. Spare blade and board driver can be stored in the handle   【specification】 full length 180 mm Material (blade / head / handle) SK-2 / Zinc / Steel Blade size Blade thickness 0.25mm, blade cross 50mm, blade width 15mm accessories Replacement blade 5 sheets / plate driver Main application Fine peeling work, rust removal, scraping work, sticking things such as seals and labels, etc.     [Optional parts] Product number  Item name K-713-B Scraper M spare blade (10 pieces of packs)    

Read more less

KANZAWA K-836 L-shaped screwdriver L. PRO-75 Since it was first released in the world in 1995, it is an L-shaped driver for electric tools that has been used in the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be very easy. Professional specification that course thread up to 75mm can be driven easily. Elastomeric grips make it hard to slip and work without handles. Normal and reverse rotation possible.   【specification】 Head depth 68mm (when attached 45mm bit attached) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 45 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V      

Read more less

KANZAWA K-841 Belt Sander 10 Disc grinder turns into a belt sander! Attached to your disc grinder, it is a convenient attachment that can be used as a belt sander. Grinders are ideal for polishing difficult or narrow places. You can freely adjust the rotational speed of the power tool with ourseparately sold speed controller .   【specification】 Belt size and count Width 10mm x length 330mm Rough # 60 · Medium # 80 · Fine # 120 for each one Main body full length 165 mm Compatible power tool Disc grinder or disc sander with shaft diameter M10 (can not be installed if the diameter of the wheel guide is Φ39 mm or less) Main application Polishing of wood, metal and plastic, shaving of paint and rust, deburring and chamfering   [Optional parts] Product number Item name K-841-2 Abrasive belt rough for replacement of belt sander 10 # 60 (4 pcs) K-841-3 Belt sander 10 Abrasive belt in the middle for replacement # 80 (4 pieces) K-841-4  Abrasive belt details for belt sander 10 replacement # 120 (4 pcs)  

Read more less

KANZAWA K-834 L-shaped drill L. PRO-10 This is an L-shaped drill for electric drills used worldwide since its first release in the world in 1995 . Ideal for drilling holes that are difficult to reach with electrical drills, such as corners and walls. Normal and reverse rotation possible.   【specification】 Chuck capacity 10 mm Handle attachment point 3 places (body back and left and right side) accessories Chuck key handle Compatible power tool Electric drill 10 mm or more    

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Hard Building Materials K-107 K-107 Free Drill WF For Hard Building Materials A two-bladed carbide free tip with carbide tip with excellent cutting balance and cutting speed. The drilling range is a universal size of 40 40 to 200 mm. Carbide tips on the blade and center drill make it ideal for drilling of exterior materials such as ceramic siding and FRP. We cope with deck material and fireproof board. An easy-to-see fluorescent color scale. Adjustment of the hole diameter can be easily done with a tool-less thumbscrew. Stable operation even in a compact place with a narrow space. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) Carbon steel (with carbide tip) / carbon steel (with carbide tip) Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 40 40 to 120 mm Main applicable material and drilling depth Ceramics-based siding, hard wood, FRP etc. up to 30 mm    [Optional parts] Product number Item name K-107-2 Free drill W with carbide tip, replaceable blade (one each for left and right)   

Read more less

KANZAWA K-716 Scraper PRO-300 It is a light work scraper that is ideal for various scraping and peeling work in the interior work and construction work areas . Since it is a normal size with a total length of 600 mm, various tasks can be performed. The blade mounting unit has a built-in fall prevention magnet, so you can safely replace the blade. In addition, we can slide the head and can store the blade, so it is safe during storage and can reduce rust on the blade. Blade replacement and storage can be done without tools with large blade fixing screws and clip-on heads. Blade A commercially available cutter blade up to 100 mm can also be mounted. * It can not be used to hit the grip end with a hammer or the like.   【specification】 full length 600 mm Material (blade / head / handle) SK-2 / Zinc / Steel Blade size Blade thickness 0.5mm, blade cross 100mm, blade width 18mm accessories 4 spare blades Main application Remove surface dirt and deposits such as glass and tiles , remove wallpaper, paint, etc., remove rust, etc.     [Optional parts] Product number  Item name K-712-LB Scraper L · PRO combined use replaceable blade thick blade (20 pieces of packs)     

Read more less

KANZAWA K-716 Scraper PRO-300 It is a light work scraper that is ideal for various scraping and peeling work in the interior work and construction work areas . Since it is a normal size with a total length of 300 mm, various tasks can be performed. The blade mounting unit has a built-in fall prevention magnet, so you can safely replace the blade. In addition, we can slide the head and can store the blade, so it is safe during storage and can reduce rust on the blade. Blade replacement and storage can be done without tools with large blade fixing screws and clip-on heads. Blade A commercially available cutter blade up to 100 mm can also be mounted. * It can not be used to hit the grip end with a hammer or the like.   【specification】 full length 300 mm Material (blade / head / handle) SK-2 / Zinc / Steel Blade size Blade thickness 0.5mm, blade cross 100mm, blade width 18mm accessories 4 spare blades Main application Remove surface dirt and deposits such as glass and tiles , remove wallpaper, paint, etc., remove rust, etc.     [Optional parts] Product number  Item name K-712-LB Scraper L · PRO combined use replaceable blade thick blade (20 pieces of packs)     

Read more less

KANZAWA K-715 Scraper PRO-200 It is a light work scraper that is ideal for various scraping and peeling work in the interior work and construction work areas . As it is a short type with a total length of 200 mm, it is ideal for work at hand. The blade mounting unit has a built-in fall prevention magnet, so you can safely replace the blade. In addition, we can slide the head and can store the blade, so it is safe during storage and can reduce rust on the blade. Blade replacement and storage can be done without tools with large blade fixing screws and clip-on heads. Blade A commercially available cutter blade up to 100 mm can also be mounted. * It can not be used to hit the grip end with a hammer or the like.   【specification】 full length 200 mm Material (blade / head / handle) SK-2 / Zinc / Steel Blade size Blade thickness 0.5mm, blade cross 100mm, blade width 18mm accessories 4 spare blades Main application Remove surface dirt and deposits such as glass and tiles , remove wallpaper, paint, etc., remove rust, etc.     [Optional parts] Product number  Item name K-712-LB Scraper L · PRO combined use replaceable blade thick blade (20 pieces of packs)    

Read more less

KANZAWA K-740-DG scraper PeLa dark green Compact and lightweight, it is a mobile scraper that can be stored easily with its blade. Both the blade and the body are all made of resin, so they can be washed completely and clean. A hit product that can be used in a variety of scenes from children to adults! The body has a shape that is easy to grip and easy to grip. The blade is made of polycarbonate so it won't damage important materials and it's safe.   【specification】 full length 115 mm Material of blade Polycarbonate Blade size Blade thickness 1 mm, blade cross over 39 mm, blade width 20 mm accessories Two spare blades Main application Cleaning such as baths and kitchens, floorings, tickers and labels, etc.     [Optional parts] Product number  Item name K-740-B Scraper PeLa spare blade (5 pieces of packs)    

Read more less

KANZAWA K-740-OR Scraper PeLa Orange Compact and lightweight, it is a mobile scraper that can be stored easily with its blade. Both the blade and the body are all made of resin, so they can be washed completely and clean. A hit product that can be used in a variety of scenes from children to adults! The body has a shape that is easy to grip and easy to grip. The blade is made of polycarbonate so it won't damage important materials and it's safe.   【specification】 full length 115 mm Material of blade Polycarbonate Blade size Blade thickness 1 mm, blade cross over 39 mm, blade width 20 mm accessories Two spare blades Main application Cleaning such as baths and kitchens, floorings, tickers and labels, etc.     [Optional parts] Product number  Item name K-740-B Scraper PeLa spare blade (5 pieces of packs)    

Read more less

KANZAWA K-430 ALC Rat Tail Saws The tip is a long type poke-saw with a 300mm blade crossing, which has a third eyepiece and a strong cutting edge suitable for straight cutting . The blade is a 3-way blade of ALC cutting (4 piles), rebar cutting (14 piles) and tip drills, and a large T-shaped handle can hold a finger or hold it in various ways. Ideal for cutting and processing of ALC and gypsum board.   【specification】 Material (blade) SK-5 Saw Rough 4 mountain / fine 14 mountain (inch eye) Blade crossing 300 mm Blade thickness 1.6 mm Main adaptation material ALC, gypsum board etc      

Read more less

KANZAWA K-415 Board cut pro Since the grip is common, it is a systematic saw with free blade replacement, and a saw for Pro cut with a board cut. Because blade passing is short, it can cut strongly even in a narrow place. Because it is a pushing cutting blade, it plays an active part in interior work such as wall surfaces, piping work, and electrical work. It is extremely easy to work with because it is possible to make a cut hole at the end of the hole and push it out. The blade can be easily replaced without tools and can be used for various main applications by replacing it with other types of blades.   【specification】 Material (blade) SK-5 Saw 18 mountains (small size) Blade crossing 100 mm Blade thickness 0.9 mm Main adaptation material Gypsum board, general wood, veneer board etc   [Optional parts] Product number Item name K-415-B Board cut pro pro replacement blade (1 sheet) K-416-B Pipe cut pro pro replacement blade (1 sheet)  

Read more less

KANZAWA K-414 For free cutting Since the grips are common, it is a systematic saw with free blade replacement, and a free-cutting series of saws. The length of the blade can be adjusted freely. The cutting hole can be drilled with a drill at the tip (120 to 200 mm) . The blade can be easily replaced without a tool, and it can be used for various main applications by replacing it with other types of blades.   【specification】 Material (blade) SK-5 Saw Oshime 20 mountain (small size) Blade crossing 160 mm Blade thickness 0.9 mm Main adaptation material Wood, veneer etc   [Optional parts] Product number Item name K-410-B Spare blade for the free saw board Rough edge (1 sheet) K-411-B Free-cutting saw for woodworking spare blade middle eye (1 sheet) K-412-B Flexible saw for metalworking spare blade Fine (1 sheet) K-414-B Spare blade for free-cutting saws (1 sheet)  

Read more less

KANZAWA K-412 Universal Saw For Metalworking It is a metalworking saw of the systematic saw and Kanzawa free-saw series that can be replaced freely because the grip is common . The length of the blade can be adjusted freely. The cutting hole can be drilled with a drill at the tip (120 to 200 mm) . The blade can be easily replaced without a tool, and it can be used for various main applications by replacing it with other types of blades.   【specification】 Material (blade) SK-5 Saw Fine 22 mountains (size) Blade crossing 200 mm Blade thickness 0.9 mm Main adaptation material Metal (iron, aluminum, copper etc.), plastic etc.   [Optional parts] Product number Item name K-410-B Spare blade for the free saw board Rough edge (1 sheet) K-411-B Free-cutting saw for woodworking spare blade middle eye (1 sheet) K-412-B Flexible saw for metalworking spare blade Fine (1 sheet) K-414-B Spare blade for free-cutting saws (1 sheet)  

Read more less

KANZAWA K-411 Universal saw for woodworking It is a systematic saw with a freely replaceable blade because it has a common grip, and a wood saw for the Kanzawa free saw series. The length of the blade can be adjusted freely. The cutting hole can be drilled with a drill at the tip (120 to 200 mm) . The blade can be easily replaced without a tool, and it can be used for various main applications by replacing it with other types of blades.   【specification】 Material (blade) SK-5 Saw Nakame 18 mountain (small size) Blade crossing 200 mm Blade thickness 0.9 mm Main adaptation material Wood, veneer etc   [Optional parts] Product number Item name K-410-B Spare blade for the free saw board Rough edge (1 sheet) K-411-B Free-cutting saw for woodworking spare blade middle eye (1 sheet) K-412-B Flexible saw for metalworking spare blade Fine (1 sheet) K-414-B Spare blade for free-cutting saws (1 sheet)  

Read more less

KANZAWA K-410 Universal saw for board It is a saw for boards of systematic saws and Kanzawa free-saw series that can be replaced freely because the grips are common . The length of the blade can be adjusted freely. The cutting hole can be drilled with a drill at the tip (120 to 200 mm) . The blade can be easily replaced without a tool, and it can be used for various main applications by replacing it with other types of blades.   【specification】 Material (blade) SK-5 Saw Rough 14 mountains (size) Blade crossing 200 mm Blade thickness 1.2 mm Main adaptation material Gypsum board, ceramic siding, etc.   [Optional parts] Product number Item name K-410-B Spare blade for the free saw board Rough edge (1 sheet) K-411-B Free-cutting saw for woodworking spare blade middle eye (1 sheet) K-412-B Flexible saw for metalworking spare blade Fine (1 sheet) K-414-B Spare blade for free-cutting saws (1 sheet)  

Read more less

KANZAWA K-840 Belt Sander 15 Disc grinder turns into a belt sander! Attached to your disc grinder, it is a convenient attachment that can be used as a belt sander. Grinders are ideal for polishing difficult or narrow places. You can freely adjust the rotational speed of the power tool with ourseparately sold speed controller .   【specification】 Belt size and count Width 15mm x length 550mm Rough # 60 · Medium # 80 · Fine # 120 each one Main body full length 280 mm Compatible power tool Disc grinder or disc sander with shaft diameter M10 (can not be installed if the diameter of the wheel guide is Φ39 mm or less) Main application Polishing of wood, metal and plastic, shaving of paint and rust, deburring and chamfering   [Optional parts] Product number Item name K-840-2 Abrasive belt rough for replacement of belt sander 15 # 60 (4 pcs) K-840-3 Belt sander 15 Abrasive belt in the middle for replacement # 80 (4 pieces) K-840-4  Abrasive belt details for belt sander 15 replacement # 120 (4 pcs)  

Read more less

KANZAWA K-880 L-shaped screwdriver L.PRO-75F Since it was first released in the world in 1995, it is a motorized L-shaped driver that has been favored all over the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be much easier. The head angle can be freely changed within the range of 180 degrees. Professional specification that course thread up to 75mm can be driven easily. Normal and reverse rotation possible.   【specification】 Head depth 70mm (with attached 45mm bit) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 45 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V      

Read more less

KANZAWA K-839 L-shaped driver L. PRO-75S Since it was first released in the world in 1995, it is an L-shaped driver for electric tools that has been used in the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be very easy. Professional specification that course thread up to 75mm can be driven easily. Compact type with 50 mm head depth! Normal and reverse rotation possible.   【specification】 Head depth 50mm (when attached 25mm bit attached) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 25 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V      

Read more less

KANZAWA K-884 L-shaped screwdriver L. PRO-70 Since it was first released in the world in 1995, it is an L-shaped driver for electric tools that has been used in the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be very easy. Professional specification that course thread up to 75mm can be driven easily. Elastomeric grips make it hard to slip and work without handles. Normal and reverse rotation possible.   【specification】 Head depth 58mm (when attached 35mm bit attached) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 35 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V    

Read more less

KANZAWA K-504 Super Punch No. 200 It is an excellent product that has adopted the square knurled type for the first time in the world. Mounting holes for steel plate, aluminum plate, stainless steel plate etc. can be drilled. It is also suitable for drilling holes such as screws and nails. Knurled finish that is hard to slip on Hardening is done to the tip part of each one, and the return of the head part is suppressed.   【specification】 full length 200 mm Material Carbon steel    

Read more less

KANZAWA K-503 Super punch oversized It is an excellent product that has adopted the square knurled type for the first time in the world. Mounting holes for steel plate, aluminum plate, stainless steel plate etc. can be drilled. It is also suitable for drilling holes such as screws and nails. Knurled finish that is hard to slip on Hardening is done to the tip part of each one, and the return of the head part is suppressed.   【specification】 full length 165 mm Material Carbon steel    

Read more less

KANZAWA K-502 During super punch It is an excellent product that has adopted the square knurled type for the first time in the world. Mounting holes for steel plate, aluminum plate, stainless steel plate etc. can be drilled. It is also suitable for drilling holes such as screws and nails. Knurled finish that is hard to slip on Hardening is done to the tip part of each one, and the return of the head part is suppressed.   【specification】 full length 125 mm Material Carbon steel    

Read more less

KANZAWA K-501 Super punch small It is an excellent product that has adopted the square knurled type for the first time in the world. Mounting holes for steel plate, aluminum plate, stainless steel plate etc. can be drilled. It is also suitable for drilling holes such as screws and nails. Knurled finish that is hard to slip on Hardening is done to the tip part of each one, and the return of the head part is suppressed.   【specification】 full length 100 mm Material Carbon steel    

Read more less

KANZAWA K-305 Counterbore Bit With this one, you can drill counterbore and through holes of various sizes. Suitable for mounting holes for locks, handrails, bracing pulls, etc., and for various hinge mounting holes. The drilling size can be adjusted freely with the included hex wrench. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 10 mm round shaft Tip shape Triangular pyramid shape Compatible power tool Electric drill, drilling machine (including electric drill with stand) 10 mm or more Drilling range Small blade Φ 22 to 36 mm · Middle blade 36 36 to 50 mm · Large blade Φ 50 to 62 mm Main applicable material and drilling depth Up to 60mm such as wood    

Read more less

KANZAWA K-304 Counterbore No. 2 With this one, you can drill counterbore and through holes of various sizes. Suitable for mounting holes for locks, handrails, bracing pulls, etc., and for various hinge mounting holes. The drilling size can be adjusted freely with the included hex wrench. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 13 mm round shaft Tip shape Triangular pyramid shape Compatible power tool Electric drill, drilling machine (including electric drill with stand) 13 mm or more Drilling range Blade small Φ 34 to 56 mm · blade large Φ 56 to 80 mm Main applicable material and drilling depth Up to 100mm such as wood    

Read more less

KANZAWA X-Bit Power Bit K-332 K-332 Power-Bit No. 3 Trusted and proven long-selling products with over 50 years of birth. Suitable for various deep drilling and through hole construction. Since the tip is triangular, it is easy to adjust the feed rate and depth. The drilling size can be adjusted with the attached spanner. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 13 mm round shaft Tip shape Triangular pyramid shape Compatible power tool Electric drill, drilling machine (including electric drill with stand) 13 mm or more Drilling range 70 70 to 110 mm Main applicable material and drilling depth Wood, gypsum board, etc. to 130 mm    

Read more less

KANZAWA X-Bit K-371 X. Bit S A-2 K-371 X. Bit S A-2 world's first! Adjustable drill with 6.35 mm hex. Compatible with 18V impact drivers. The impact driver can experience the sharpness of the trust and results of the expansion. The tip is a screw cone shape suitable for through holes, so drilling can be done smoothly and quickly. The drilling size can be adjusted with the attached spanner. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 6.5 mm hex shaft Tip shape Screw cone shape Compatible power tool Impact driver 18V, electric drill 6.5 mm or more Drilling range 25 25 to 35 mm Main applicable material and drilling depth Wood, gypsum board, etc. up to 60mm    

Read more less

KANZAWA X-Bit Power Bit K-302 K-302 X-Bit No. 2 Trusted and proven long-selling products with over 50 years of birth. Suitable for various deep drilling and through hole construction. Since the tip is triangular, it is easy to adjust the feed rate and depth. The drilling size can be adjusted with the attached spanner. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 10 mm three-sided axis Tip shape Triangular pyramid shape Compatible power tool Electric drill, drilling machine (including electric drill with stand) 6.5 mm or more Drilling range Small blade Φ 22 to 40 mm · Large blade Φ 40 to 76 mm Main applicable material and drilling depth Wood, gypsum board etc. to 130 mm   [Optional parts] Product number Item name K-302-3 X-Pot / Power-Pit No.2 Combined Spare Blade Large ( 40-76mm)  

Read more less

KANZAWA X-Bit Power Bit K-301 K-301 X-Bit No. 1 Trusted and proven long-selling products with over 50 years of birth. Suitable for various deep drilling and through hole construction. Since the tip is triangular, it is easy to adjust the feed rate and depth. The drilling size can be adjusted with the attached spanner. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 6.5 mm three-sided axis Tip shape Screw cone shape  Compatible power tool Electric drill, drilling machine (including electric drill with stand) 6.5 mm or more Drilling range Blade small Φ 15 to 25 mm · blade large Φ 25 to 45 mm Main applicable material and drilling depth Wood, gypsum board etc. to 90 mm   [Optional parts] Product number Item name K-301-3 X-Pot / Power-Pit No.1 Combined Replacement Blade Large (Φ 25-45 mm)  

Read more less

KANZAWA X-Bit K-370 X. Bit S A-1 K-370 X. Bit S A-1 world's first! Adjustable drill with 6.35 mm hex. Compatible with 18V impact drivers. The impact driver can experience the sharpness of the trust and results of the expansion. The tip is a screw cone shape suitable for through holes, so drilling can be done smoothly and quickly. The drilling size can be adjusted with the attached spanner. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 6.5 mm hex shaft Tip shape Screw cone shape Compatible power tool Impact driver 18V, electric drill 6.5 mm or more Drilling range 20 20 to 26 mm Main applicable material and drilling depth Wood, gypsum board, etc. up to 60mm    

Read more less

KANZAWA X-Bit Power Bit K-202 K-202 X-Bit No. 2 Trusted and proven long-selling products with over 50 years of birth. Suitable for various deep drilling and through hole construction. The tip is a screw cone shape suitable for through holes, so drilling can be done smoothly and quickly. The drilling size can be adjusted with the attached spanner. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 10 mm three-sided axis Tip shape Screw cone shape Compatible power tool Electric drill 10 mm or more, three claw click ball Drilling range Small blade Φ 22 to 40 mm · Large blade Φ 40 to 76 mm Main applicable material and drilling depth Wood, gypsum board, etc. to 130 mm   [Optional parts] Product number Item name K-302-3 X-Pot / Power-Pit No.2 Combined Spare Blade Large ( 40-76mm)  

Read more less

KANZAWA X-Bit Power Bit K-201 K-201 X-Bit No. 1 Trusted and proven long-selling products with over 50 years of birth. Suitable for various deep drilling and through hole construction. The tip is a screw cone shape suitable for through holes, so drilling can be done smoothly and quickly. The drilling size can be adjusted with the attached spanner. The speed of the power tool can be freely adjusted with the optional speed controller .   【specification】 Material (blade) Alloy tool steel Shank shape 10 mm three-sided axis Tip shape Screw cone shape Compatible power tool Electric drill 10 mm or more, three claw click ball Drilling range Blade small Φ 15 to 25 mm · blade large Φ 25 to 45 mm Main applicable material and drilling depth Wood, gypsum board, etc. to 110 mm   [Optional parts] Product number Item name K-301-3 X-Pot / Power-Pit No.1 Combined Replacement Blade Large (Φ 25-45 mm)  

Read more less

KANZAWA K-704 Circle Cutter M K-704 Circle Cutter M It is a handy circle cutter that can drill holes of Φ40 to 300 mm. It is a sharp ultra-strong blade with a blade thickness of 1 mm, which can handle various drillings from paper to plywood. For remodeling work such as craft making and cloth, carpet using cardboard, plywood. When not in use, it is a safety design that can store the blade and center pin in the body. With 4 blades (1 is the main unit, 3 are stored in the grip). Be sure to use it clockwise (clockwise).   【specification】 Material (blade / horizontal axis) 　SK-2 / Zinc die casting Drilling range 　40 40 to 300 mm Main applicable material and drilling depth  　Up to 3 mm plywood ・ Rubber board ・ carpet ・ wallpaper ・ cardboard ・soft vinyl ・ flooring ・ cloth ・ decorative board ・ board etc. up to 8 mm   [Optional parts] Product number Item name K-710-2 Circle cutter spare blade S · M · L combined use (10 pieces of packs)   

Read more less

KANZAWA K-701 Circle Cutter S K-701 Circle Cutter S A compact hand-held circular cutter that can be drilled with a Φ 40 to 210 mm diameter with one hand. It is a sharp ultra-strong blade with a blade thickness of 1 mm, which can handle various drillings from paper to plywood. For remodeling work such as craft making and cloth, carpet using cardboard, plywood. It is a safety design that can store the blade in the body when not in use. With 4 blades (1 is the main unit, 3 are stored in the grip). Be sure to use it clockwise (clockwise).   【specification】 Material (blade / horizontal axis) 　SK-2 / Zinc die casting Drilling range 　40 40 to 210 mm Main applicable material and drilling depth  　Up to 3 mm plywood ・ Rubber board ・ carpet ・ wallpaper ・ cardboard ・ 　soft vinyl ・ flooring ・ cloth ・ decorative board ・ board etc. up to 8 mm   [Optional parts] Product number Item name K-710-2 Circle cutter spare blade S · M · L combined use (10 pieces of packs)   

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Free Disc O Disc Cutting K-160 K-160 For Free Disc O Disc Cutting This is a 2-flute free drill with excellent cutting balance and speed. A disc with no center hole can be made. For drilling machine (including electric drill with stand) only. Tool-less, easy adjustment of hole diameter with thumbscrew. For making woodworking crafts such as coasters and wood carving. It is also suitable for making a disc for repair. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) High-speed steel Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 40 40 to 180 mm Main applicable material and drilling depth Wood, plastic, etc. up to 12mm   [Optional parts] Product number Item name K-160-2 Free drill O replacement blade (one each for left and right)   

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Building Materials K-117 K-117 Free Drill W-SF For Rigid Building Materials A two-bladed carbide free tip with carbide tip with excellent cutting balance and cutting speed. The drilling range is a compact size of Φ 40 to 120 mm. Carbide tips on the blade and center drill make it ideal for drilling of exterior materials such as ceramic siding and FRP. We cope with deck material and fireproof board. An easy-to-see fluorescent color scale. Adjustment of the hole diameter can be easily done with a tool-less thumbscrew. Stable operation even in a compact place with a narrow space. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) Carbon steel (with carbide tip) / carbon steel (with carbide tip) Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 40 40 to 120 mm Main applicable material and drilling depth Ceramics-based siding, hard wood, FRP etc. up to 30 mm   [Optional parts] Product number Item name K-107-2 Free drill W with carbide tip, replaceable blade (one each for left and right)   

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Woodworking K-106 K-106 Free Drill W-E For Woodworking It is a free drill for woodworking 2-blade type with excellent cutting balance and cutting speed. The drilling range is a compact size of Φ 40 to 120 mm. For drilling wood, structural plywood and gypsum board. An easy-to-see fluorescent color scale. Tool-less, easy adjustment of hole diameter with thumbscrew. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) High-speed steel / High-speed steel Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 40 40 to 120 mm Main applicable material and drilling depth Wood, gypsum board, plastic etc. to 30 mm   [Optional parts] Product number Item name K-106-2 Free drill W for woodworking spare blade (one each for left and right)  

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Woodworking K-116 K-116 Free Drill W-SE For Woodworking It is a free drill for woodworking 2-blade type with excellent cutting balance and cutting speed. The drilling range is a compact size of Φ 40 to 120 mm. For drilling wood, structural plywood and gypsum board. An easy-to-see fluorescent color scale. Tool-less, easy adjustment of hole diameter with thumbscrew. Stable operation even in a compact place with a narrow space. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) High-speed steel / High-speed steel Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 40 40 to 120 mm Main applicable material and drilling depth Wood, gypsum board, plastic etc. to 30 mm   [Optional parts] Product number Item name K-106-2 Free drill W for woodworking spare blade (one each for left and right)  

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Metal K-151 K-151 For Free Drill M Metalworking A single hole can be drilled from small holes to large holes. Since the blade and drill are coated with titanium, it is possible to drill stainless steel plates. Trusted and proven long-selling products with over 50 years of birth. The compact design is ideal for drilling at wall and corners. Tool-less, easy adjustment of hole diameter with thumbscrew. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) High-Speed ​​Steel Titanium Coat Finish / High-Speed ​​Steel Titanium Coat Finish Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 30 30 to 130 mm Main applicable material and drilling depth Iron plate 2 mm · Aluminum plate 5 mm · Stainless plate 2 mm   [Optional parts] Product number Item name K-151-2 Free drill M spare blade for metalworking  

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Metal K-150 K-150 Free drill K for hard building materials A single hole can be drilled from small holes to large holes. Ideal for drilling exterior wall materials such as ceramic siding. Trusted and proven long-selling products with over 50 years of birth. The compact design is ideal for drilling at wall and corners. Tool-less, easy adjustment of hole diameter with thumbscrew. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) Carbon steel (with carbide tip) / carbon steel (with carbide tip) Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 30 30 to 130 mm Main applicable material and drilling depth Ceramics-based siding, FRP etc. up to 28mm   [Optional parts] Product number Item name K-150-2 Free drill K for spare materials for hard building materials (Φ 30 to 130 mm)  

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Metal K-104 K-104 For Free-Pit Metalworking A single hole can be drilled from small holes to large holes. Ideal for drilling steel plates and aluminum plates. Trusted and proven long-selling products with over 50 years of birth. The compact design is ideal for drilling at wall and corners. Tool-less, easy adjustment of hole diameter with thumbscrew. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) High-speed steel / High-speed steel Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 20 20 to 76 mm Main applicable material and drilling depth Iron plate 2 mm · Aluminum plate 4 mm   [Optional parts] Product number Item name K-104-2 Free drilling spare blade for metalworking  

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Wood K-102 K-102 For Free Drill B Thick Plate A single hole can be drilled from small holes to large holes. Ideal for drilling structural plywood etc. Trusted and proven long-selling products with over 50 years of birth. The compact design is ideal for drilling at wall and corners. Tool-less, easy adjustment of hole diameter with thumbscrew. The speed of the power tool can be freely adjusted with the optional speed controller . 【specification】 Material (blade / drill) Carbon steel / carbon steel Shank shape 10 mm three-sided axis Compatible power tool Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 40 40 to 120 mm Main applicable material and drilling depth Wood, gypsum board, rubber, etc. up to 28mm   [Optional parts] Product number Item name K-102-2 Spare blade 80 mm ( 40 to 120 mm) for free cone B thick plate    

Read more less

KANZAWA Adjustable-Diameter Hole Saws For Wood K-101 K-101 For free cone A thin plate A single hole can be drilled from small holes to large holes. Ideal for drilling thin veneers and rubber. Trusted and proven long-selling products with over 50 years of birth. The compact design is ideal for drilling at wall and corners. Tool-less, easy adjustment of hole diameter with thumbscrew. The speed of the power tool can be freely adjusted with the optional speed controller 【specification】 Material (blade / drill) 　Carbon steel / carbon steel Shank shape 　10 mm three-sided axis Compatible power tool 　Electric drill, drilling machine (including lectric drill with stand) 10 mm or more Drilling range 　40 40 to 120 mm Main applicable material and drilling depth 　Wood, gypsum board, rubber, etc. up to 5mm   [Optional parts] Product number Item name K-101-2 　Spare blade 80 mm (A 40 to 120 mm) for free cone A thin plate

Read more less