SMC

SMC ZK2A12K5NL2-06-B — ZK2A Vacuum Unit, Single Unit Type Vacuum Generator. Specification — ZK2A12K5NL2-06-B Fluid Air Weight 98 g Specification values above are for model code ZK2A12K5NL2-06-B as published by SMC. A change of one character in the suffix gives a different part, so order by the full code. How to order Series features Fluid: air, inert gas Energy-saving vacuum generator Compact and lightweight Multiple mounting options Easy maintenance Supply from KoreaGenuine SMC, sourced through Korean distribution and shipped from Korea by FedEx International Priority with export packing and commercial documents. Need a different stroke, switch or suffix? Send the full model code and quantity and we will quote it.

Read more less

SMC ZK2A10K5CLA-08 — ZK2A Vacuum Unit, Single Unit Type Vacuum Generator. Specification — ZK2A10K5CLA-08 Fluid Air Weight 190 g Specification values above are for model code ZK2A10K5CLA-08 as published by SMC. A change of one character in the suffix gives a different part, so order by the full code. How to order Series features Fluid: air, inert gas Energy-saving vacuum generator Compact and lightweight Multiple mounting options Easy maintenance Supply from KoreaGenuine SMC, sourced through Korean distribution and shipped from Korea by FedEx International Priority with export packing and commercial documents. Need a different stroke, switch or suffix? Send the full model code and quantity and we will quote it.

Read more less

SMC ZK2A07K5CLA-06-B — ZK2A Vacuum Unit, Single Unit Type Vacuum Generator. Specification — ZK2A07K5CLA-06-B Fluid Air Weight 165 g Specification values above are for model code ZK2A07K5CLA-06-B as published by SMC. A change of one character in the suffix gives a different part, so order by the full code. How to order Series features Fluid: air, inert gas Energy-saving vacuum generator Compact and lightweight Multiple mounting options Easy maintenance Supply from KoreaGenuine SMC, sourced through Korean distribution and shipped from Korea by FedEx International Priority with export packing and commercial documents. Need a different stroke, switch or suffix? Send the full model code and quantity and we will quote it.

Read more less

SMC CDQ2B160-75DCMZ — CQ2-Z Series Large Diameter Thin Cylinder, Double Acting,Single Rod. This code specifies 160mm bore, 75mm stroke, double acting, single rod, built-in magnet, without auto switch. Specification — CDQ2B160-75DCMZ Magnet Built-in magnet Bore 160mm Port thread Rc Stroke 75mm Body option Rod end male thread Switch mounting groove 4 surfaces Auto switch Without auto switch Port size 3/8 Fluid Air Action Double acting, single rod Cushion Rubber bumper Rod end male thread M36X1.5 Min. operating pressure 0.05 MPa Max. operating pressure 1.0 MPa Proof pressure 1.5 MPa Lubrication Non-lube Weight 8,810 g Specification values above are for model code CDQ2B160-75DCMZ as published by SMC. A change of one character in the suffix gives a different part, so order by the full code. About the SMC CQ2-Z series A space-saving cylinder designed with a thin overall length to realize compact equipment Small auto switches can be attached to 4 surfaces (2 surfaces for ø12 to ø25). There is no protruding auto switch. Light weight: reduced by 5~13% (compared to the previous CQ2) Newly added support bracket for double clevis and compact foot type bracket Enclosed installation bolt and set the part number for rod end bracket attachment (reducing the trouble of ordering separately) Supply from KoreaGenuine SMC, sourced through Korean distribution and shipped from Korea by FedEx International Priority with export packing and commercial documents. Need a different stroke, switch or suffix? Send the full model code and quantity and we will quote it.

Read more less

SMC CDM2B32-100AZ — CM2-Z Series Air Cylinder, round body, Double Acting, Single Rod. This code specifies 32mm bore, 100mm stroke, double acting, without auto switch. Specification — CDM2B32-100AZ Bore 32mm Port thread Rc Stroke 100mm Auto switch Without auto switch Port size 1/8 Fluid Air Action Double acting Rod end male thread M10X1.25 Min. operating pressure 0.05 MPa Max. operating pressure 1.0 MPa Proof pressure 1.5 MPa Fluid temp. min -10 ℃ Fluid temp. max 60 ℃ Ambient temp. min -10 ℃ Ambient temp. max 60 ℃ Lubrication Non-lube Weight 445 g Specification values above are for model code CDM2B32-100AZ as published by SMC. A change of one character in the suffix gives a different part, so order by the full code. About the SMC CM2-Z series Standardized rod end shape female thread Improved auto switch operability, easy position adjustment Single clevis, set rocking support bracket for trunnion Set rod end bracket, swing bracket attached part number (reduces the trouble of ordering separately) ) With auto switch (CDM2-Z series: CDM2, CDM2W, CDM2K, CDM2KW, CDM2R, CDM2RK) Supply from KoreaGenuine SMC, sourced through Korean distribution and shipped from Korea by FedEx International Priority with export packing and commercial documents. Need a different stroke, switch or suffix? Send the full model code and quantity and we will quote it.

Read more less

Genuine SMC KQ2L04-M3G metric one-touch fitting, male elbow type. Connects Ø4 mm OD tubing to an M3 port with a gasket seal. Push-in connection, no tools required. Suitable for vacuum down to −100 kPa. Series KQ2 one-touch fittings (metric size) Type Male elbow Applicable tube OD Ø4 mm Connection thread M3, with gasket seal Vacuum Usable down to −100 kPa Weight 2.7 g Image may differ from the actual product. Specifications per SMC catalog. SMC parts are non-returnable.

Read more less

The SMC KK130S-04MS is a socket for the KK130 Series S Coupler, with an R1/2 male thread for direct connection to equipment or piping. Compared with the previous KK13 Series, the KK130 delivers 34% higher flow (Cv), 22% lower plug insertion force (20 N less), and 14% lighter weight (12 g less), making connections faster and easier on air lines. Specifications Model KK130S-04MS Series KK130 Series S Coupler Type Socket, male thread Connection R1/2 male thread Flow (Cv) 34% higher vs. KK13 Series Plug insertion force 22% (20 N) lower vs. KK13 Series Weight 83 g per piece (14% / 12 g lighter vs. KK13 Series) Package & Ordering Sold in packs of 10 — price shown is per pack of 10 Socket only; plug sold separately Ships in 4–5 weeks Non-returnable item For volume pricing, contact us.

Read more less

The SMC AFF8C-F04D-T is a main line filter from the AFF Series, installed on the compressed air supply line to remove oil, water and solid contaminants. Cleaner upstream air improves the performance of downstream air dryers, extends the element life of precision filters, and helps prevent trouble in pneumatic equipment. Specifications Model AFF8C-F04D-T Series AFF Series main line filter Port size G1/2 Function Removes oil, water and solid particles from compressed air Weight 900 g Ordering Note G-thread (BSPP) port version. Non-returnable item. For volume pricing, contact us.

Read more less

The SMC KQ2U04-00A is a one-touch union Y fitting from the KQ2 Series that splits one Ø4 mm tube line into two Ø4 mm branches. Tubes connect instantly by pushing them in and release with the release button, making it a quick way to branch air lines in pneumatic panels and automation equipment. Usable with vacuum down to -100 kPa. Specifications Model KQ2U04-00A Series KQ2 Series one-touch fitting (metric) Type Union Y (1 inlet, 2 outlets) Applicable tube OD Ø4 mm (all ports) Vacuum Usable down to -100 kPa Weight 2.9 g per piece Package & Ordering Sold in packs of 10 — price shown is per pack of 10 Non-returnable item For volume pricing, contact us.

Read more less

The SMC KQ2LU04-00A is a one-touch union elbow from the KQ2 Series that joins two Ø4 mm tubes at a 90° angle. Tubes connect instantly by pushing them in and release with the release button, making it ideal for tight routing in pneumatic panels and automation equipment. Usable with vacuum down to -100 kPa. Specifications Model KQ2LU04-00A Series KQ2 Series one-touch fitting (metric) Type Union elbow (tube to tube, 90°) Applicable tube OD Ø4 mm (both ends) Vacuum Usable down to -100 kPa Weight 3.1 g per piece Package & Ordering Sold in packs of 10 — price shown is per pack of 10 Non-returnable item For volume pricing, contact us.

Read more less

SMC AS1301F-M5-04A — AS series speed controller, body size 1, with a one-touch fitting and a 360° swivel elbow. Meter-out flow control set at the cylinder port, with the tube free to leave in any direction. Specification — AS1301F-M5-04A Type Speed controller, universal elbow (360° swivel) Body size 1 Thread M5 x 0.8 Tube O.D. ø4 mm Control Meter-out Product weight 6 g Features Stainless steel type Push-lock knob — set the speed, push to lock, and the setting holds against vibration Larger knob for easier adjustment by hand Insertion force reduced by up to 30% (8 N) and removal force by up to 20% (5 N), with tube holding strength unchanged from the previous model 360° swivel piping, so the tube can be routed after the fitting is tightened Restrictor versions available as made-to-order (-X214, -X21) Typical use Cylinder ports on crowded machines where the tube direction is decided at assembly, not at design. Clamps, stoppers, feeders and pick-and-place heads. Ordering Order by the full code AS1301F-M5-04A. The AS12 and AS13 prefixes look similar but give different bodies, and the middle and last sections give the thread and tube O.D., so one character changes the part. Need another thread or tube size in the AS range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS1002F-04 — AS series speed controller, in-line type with one-touch fittings at both ends. Meter-out flow control that drops into an existing tube run, and can be mounted where the operator can reach it rather than at the cylinder port. Specification — AS1002F-04 Type Speed controller, in-line Tube O.D. ø4 mm, both ends Control Meter-out Mounting Direct, L-bracket, DIN rail or holder Product weight 5.5 g Features Four mounting methods — direct, L-bracket, DIN rail and holder — so a bank of controllers can be grouped on one plate Index plate fitted, so each controller can be numbered to the cylinder it serves Weight reduced by 30% against the previous model (comparison based on AS2002F-04) Why mount them together When speed controllers sit at the cylinder ports, trimming a machine means reaching into the frame for each one. Grouping them on a DIN rail or bracket at the panel puts every adjustment in one place, and the index plate records which cylinder each one feeds — useful when the machine is handed over to a maintenance team. Ordering Order by the full code AS1002F-04. The digits give the body size and tube O.D., and the suffix gives the port type, so one character changes the part. Need another tube size, the ø6 and ø8 bodies, or the bracket and holder accessories? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS4000-04 — AS series speed controller, in-line type, body size 4. Meter-out flow control with threaded ports, sized for large-bore cylinders where a push-in fitting type would choke the flow. Specification — AS4000-04 Type Speed controller, in-line, straight Body size 4 (1/2 class) Port size Rc 1/2 Control Meter-out Fluid Air Operating pressure 0.05 to 1.0 MPa Proof pressure 1.5 MPa Fluid temperature −5 to 60 °C Free flow C = 4.6 dm³/(s·bar), b = 0.35 Controlled flow C = 4.6 dm³/(s·bar), b = 0.20 Lock nut Hexagon lock nut Product weight 205 g Why the in-line type The body sits in the tube run rather than in the cylinder port, so the speed can be trimmed from a point the operator can reach. With Rc 1/2 ports and a free-flow C value of 4.6, it passes enough air for large-bore cylinders without becoming the restriction itself. Typical use Speed control on large cylinders, presses and gate actuators, and any circuit where the cylinder port is buried inside a machine frame. Ordering Order by the full code AS4000-04. The first digits give the body size and the suffix gives the port size, so one character changes the part. Need another port size in the AS4000 range, or the elbow and universal styles? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS1301F-M3-04 — AS series speed controller, universal type with a one-touch fitting. Meter-out flow control with a scale window, so the setting is read as a number instead of counting turns. The M3 thread suits the small ports on miniature cylinders and compact valves. Specification — AS1301F-M3-04 Type Speed controller, universal (swivel body) Thread M3 x 0.5 Tube O.D. ø4 mm Control Meter-out Adjustment Push-lock handle with flow scale window Surface treatment Electroless nickel plated (standard) Product weight 5 g Features Scale window shows the flow setting as a value, which cuts setup time and removes the guesswork that causes setting mistakes Enlarged push-lock handle — set it, push to lock, and the setting holds against vibration Improved flow rate reproducibility, so the same reading gives the same cylinder speed Easier tube insertion and removal Electroless nickel plating is standard, not an option AS1201F or AS1301F Both share the same thread, tube size and adjustment mechanism. The 12 body is a fixed elbow; the 13 body swivels, so the tube direction can be set after the fitting is tightened. On crowded machines the swivel body saves rework at assembly. Ordering Order by the full code AS1301F-M3-04. The thread is part of the code — M3 and M5 bodies are not interchangeable — and the last digits give the tube O.D. Need another thread or tube size, or the in-line style in the same range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS1002F-04 — AS series speed controller, in-line type with one-touch fittings at both ends. Meter-out flow control that drops into an existing tube run, and can be mounted where the operator can reach it rather than at the cylinder port. Specification — AS1002F-04 Type Speed controller, in-line Tube O.D. ø4 mm, both ends Control Meter-out Mounting Direct, L-bracket, DIN rail or holder Product weight 5.5 g Features Four mounting methods — direct, L-bracket, DIN rail and holder — so a bank of controllers can be grouped on one plate Index plate fitted, so each controller can be numbered to the cylinder it serves Weight reduced by 30% against the previous model (comparison based on AS2002F-04) Why mount them together When speed controllers sit at the cylinder ports, trimming a machine means reaching into the frame for each one. Grouping them on a DIN rail or bracket at the panel puts every adjustment in one place, and the index plate records which cylinder each one feeds — useful when the machine is handed over to a maintenance team. Ordering Order by the full code AS1002F-04. The digits give the body size and tube O.D., and the suffix gives the port type, so one character changes the part. Need another tube size, the ø6 and ø8 bodies, or the bracket and holder accessories? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC KQ2L04-00A — KQ2L series one-touch fitting, union elbow, metric size. Push the tube in and it locks; press the collar to release. The 90° body turns the line without a bend radius in the tube. Specification — KQ2L04-00A Type Union elbow, tube to tube Tube O.D. ø4 mm, both ports Body material Brass, electroless nickel plated Operating pressure Vacuum −100 kPa to 1.0 MPa Product weight 1.9 g About the KQ2 series KQ2 covers 51 body shapes across the range, in brass or electroless nickel plated brass, for metric tube from ø2 to ø16 mm and inch tube from 1/8" to 1/2". Rated for vacuum down to −100 kPa, so the same fitting serves pressure and vacuum lines. The elbow body keeps the tube run tight against the machine frame where a swept bend will not fit. Typical use Cylinder and valve ports in confined spaces, panel entries, and any run that has to turn immediately at the connection. Ordering Order by the full code KQ2L04-00A. The digits give the tube O.D. and the suffix gives the port type and surface treatment, so one character changes the part. Need another tube size or a threaded elbow in the KQ2L range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS1002F-04A — AS series speed controller, in-line type. Meter-out flow control with one-touch fittings at both ends, so it drops into an existing tube run without cutting new ports. Specification — AS1002F-04A Type Speed controller, in-line Tube O.D. ø4 mm, both ends Control Meter-out Surface treatment Electroless nickel plated (standard) Product weight 4 g Features Push-lock knob — set the speed, push to lock, and the setting holds against vibration Knob outside diameter almost doubled, so it turns easily by hand Improved flow rate reproducibility, so the same number of turns gives the same speed Weight reduced by approximately 27% over the previous model Electroless nickel plating is standard, not an option Panel mount version now available — no tools needed, which cuts installation time Typical use Speed adjustment where the cylinder port is buried or already occupied, or where several cylinders are trimmed from one accessible point. Cut the tube, push both ends in, and adjust. Ordering Order by the full code AS1002F-04A. The digits give the body size and tube O.D., and the suffix gives the port and plating type, so one character changes the part. Need another tube size, or the elbow and universal styles in the same range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS1211F-M5-04 — AS series speed controller, elbow type with a one-touch fitting. Meter-out flow control with a scale window, so the setting is read as a number instead of counting turns. Specification — AS1211F-M5-04 Type Speed controller, elbow Thread M5 x 0.8 Tube O.D. ø4 mm Control Meter-out Adjustment Push-lock handle with flow scale window Surface treatment Electroless nickel plated (standard) Product weight 7 g Features Scale window shows the flow setting as a value, which cuts setup time and removes the guesswork that causes setting mistakes Enlarged push-lock handle — set it, push to lock, and the setting holds against vibration Improved flow rate reproducibility, so the same reading gives the same cylinder speed Easier tube insertion and removal Electroless nickel plating is standard, not an option Why the scale matters On a machine with twenty cylinders, a controller without a scale has to be re-tuned by eye every time a unit is replaced. With a numbered window the setting is recorded once and restored in seconds, and the same value can be applied across identical stations. Ordering Order by the full code AS1211F-M5-04. Within the AS range the prefix gives the body and adjustment style, and the rest gives the thread and tube O.D., so one character changes the part. Need another thread or tube size, or the in-line and universal styles? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS1301F-M5-04A — AS series speed controller, body size 1, with a one-touch fitting and a 360° swivel elbow. Meter-out flow control set at the cylinder port, with the tube free to leave in any direction. Specification — AS1301F-M5-04A Type Speed controller, universal elbow (360° swivel) Body size 1 Thread M5 x 0.8 Tube O.D. ø4 mm Control Meter-out Product weight 6 g Features Stainless steel type Push-lock knob — set the speed, push to lock, and the setting holds against vibration Larger knob for easier adjustment by hand Insertion force reduced by up to 30% (8 N) and removal force by up to 20% (5 N), with tube holding strength unchanged from the previous model 360° swivel piping, so the tube can be routed after the fitting is tightened Restrictor versions available as made-to-order (-X214, -X21) Typical use Cylinder ports on crowded machines where the tube direction is decided at assembly, not at design. Clamps, stoppers, feeders and pick-and-place heads. Ordering Order by the full code AS1301F-M5-04A. The AS12 and AS13 prefixes look similar but give different bodies, and the middle and last sections give the thread and tube O.D., so one character changes the part. Need another thread or tube size in the AS range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2B25-10DM — CQ2 Z series compact cylinder, ø25 bore with 10 mm stroke, double acting single rod. The whole body is short for its bore, which is what makes it fit stations where a tie-rod cylinder cannot. Specification — CQ2B25-10DM Series CQ2 Z (compact cylinder, standard type) Bore ø25 mm Stroke 10 mm Action Double acting, single rod Mounting B — through hole (standard) Rod end M — male thread Fluid Air Product weight 126 g About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces (two faces on ø12 to ø25) and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Part numbers with mounting bolts included and with a rod end fitting fitted, which saves ordering them separately Magnet-equipped versions carry the CDQ2 prefix (CDQ2, CDQ2W, CDQ2K, CDQ2KW, CDQP2, CDQ2□S, CDBQ2) Typical use Clamping, stoppers, lifting jigs, part ejection and any station where panel depth is tight and a standard cylinder will not fit. Ordering Order by the full code

Read more less

SMC AS1201F-M3-04 — AS series speed controller, elbow type with a one-touch fitting. Meter-out flow control with a scale window, so the setting is read as a number instead of counting turns. The M3 thread suits the small ports found on miniature cylinders and compact valves. Specification — AS1201F-M3-04 Type Speed controller, elbow Thread M3 x 0.5 Tube O.D. ø4 mm Control Meter-out Adjustment Push-lock handle with flow scale window Surface treatment Electroless nickel plated (standard) Product weight 4 g Features Scale window shows the flow setting as a value, which cuts setup time and removes the guesswork that causes setting mistakes Enlarged push-lock handle — set it, push to lock, and the setting holds against vibration Improved flow rate reproducibility, so the same reading gives the same cylinder speed Easier tube insertion and removal Electroless nickel plating is standard, not an option Why the scale matters On a machine with twenty cylinders, a controller without a scale has to be re-tuned by eye every time a unit is replaced. With a numbered window the setting is recorded once and restored in seconds, and the same value can be applied across identical stations. Ordering Order by the full code AS1201F-M3-04. The thread is part of the code — M3 and M5 bodies are not interchangeable — and the last digits give the tube O.D. Need another thread or tube size, or the in-line and universal styles in the same range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2A25-25D — CQ2 Z series compact cylinder, ø25 bore with 25 mm stroke, double acting single rod. The whole body is short for its bore, which is what makes it fit stations where a tie-rod cylinder cannot. Specification — CQ2A25-25D Series CQ2 Z (compact cylinder, standard type) Bore ø25 mm Stroke 25 mm Action Double acting, single rod Mounting A — both ends tapped Magnet None (CDQ2 prefix for auto switch versions) Fluid Air Product weight 150 g About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces (two faces on ø12 to ø25) and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Part numbers with mounting bolts included and with a rod end fitting fitted, which saves ordering them separately Magnet-equipped versions carry the CDQ2 prefix (CDQ2, CDQ2W, CDQ2K, CDQ2KW, CDQP2, CDQ2□S, CDBQ2) Typical use Clamping, stoppers, lifting jigs, part ejection and any station where panel depth is tight and a standard cylinder will not fit. Ordering Order by the full code CQ2A25-25D. The bore and stroke come first, then the mounting letter, then the rod end and option codes — a single character changes the part. This code has no built-in magnet; if you need auto switch mounting, order the CDQ2 equivalent. Need another bore, stroke or mounting style? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC JB25-6-100 — JB series floating joint, sized for ø25 compact cylinders. It absorbs shaft misalignment and out-of-parallel mounting between the rod and the driven part, so the two do not have to be aligned during installation. Specification — JB25-6-100 Type Floating joint, compact cylinder type For cylinder bore ø25 mm Rod thread M6 Overall length 100 mm Product weight 70 g What it does A cylinder rod is made to take axial load, not side load. When the rod and the driven part are even slightly off centre or out of parallel, every stroke pushes the rod sideways, which wears the rod seal and the bushing and eventually bends the rod. A floating joint takes that movement in the joint instead, and removes the alignment work at installation. Typical use Fitted at the rod end of compact cylinders driving slides, gates and jigs — anywhere the cylinder and the load cannot be aligned precisely, or where the load position shifts during the stroke. Ordering Order by the full code JB25-6-100. The first number gives the cylinder bore the joint is designed for, the second gives the rod thread and the third the length, so all three must match the cylinder. Tell us your cylinder model and we will confirm the matching joint. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AS1201F-M5-04A — AS series speed controller, elbow type, body size 1. Meter-out flow control with a built-in one-touch fitting, so cylinder speed is set right at the port without extra piping. Specification — AS1201F-M5-04A Type Speed controller, elbow, universal Body size 1 Thread M5 x 0.8 Tube O.D. ø4 mm Control Meter-out Product weight 5 g Features Stainless steel type Push-lock knob — set the speed, push to lock, and the setting will not drift with vibration Larger knob for easier adjustment by hand Insertion force reduced by up to 30% (8 N) and removal force by up to 20% (5 N), with tube holding strength unchanged from the previous model 360° swivel piping (universal type), so the tube can leave in any direction after fitting Restrictor versions available as made-to-order (-X214, -X21) Typical use Fitted directly into the port of any air cylinder that needs a controlled extend or retract speed — clamps, stoppers, feeders and pick-and-place heads. The elbow body suits ports facing a frame or panel where a straight fitting would foul. Ordering Order by the full code AS1201F-M5-04A. In this series the first digits give the body size, the middle section gives the thread, and the last gives the tube O.D., so one character changes the part. Need another thread or tube size in the AS range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC KQ2S04-M5N — KQ2S series one-touch fitting, hexagon socket head half union, metric size. Push the tube in and it locks; press the collar to release. No tools, no sealing tape on the tube side. Specification — KQ2S04-M5N Type Half union, hexagon socket head Tube O.D. ø4 mm Thread M5 x 0.8 Body material Brass, electroless nickel plated Operating pressure Vacuum −100 kPa to 1.0 MPa Product weight 3 g About the KQ2S series The hexagon socket head lets the fitting be tightened in a recess or between closely spaced ports where a spanner will not fit. The series runs to 51 body shapes, in brass or electroless nickel plated brass, and covers metric tube from ø2 to ø16 mm and inch tube from 1/8" to 1/2". Rated for vacuum service down to −100 kPa, so the same fitting works on both pressure and vacuum lines. Typical use General pneumatic piping, cylinder and valve ports, vacuum pad lines, and rework where a compact connection is needed. Ordering Order by the full code KQ2S04-M5N. In this series the digits give the tube O.D. and the suffix gives the thread size and surface treatment, so one character changes the part. Need another tube or thread size in the KQ2S range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC VVQ4000-10A-1 — blanking plate assembly for VQ4000 series manifolds. Closes an unused manifold station so the block stays sealed and ready for a valve to be added later. Specification — VVQ4000-10A-1 Type Blanking plate assembly For manifold series VQ4000 Supplied as Plate with gasket and mounting screws Product weight 58 g Why fit a blanking plate Manifolds are usually ordered with spare stations for future expansion. A blanking plate seals those stations against leakage while keeping the port, wiring position and station number intact, so a valve can be dropped in later without rebuilding the manifold. Leaving a station open loses air and lets dirt into the block. Typical use Spare stations on new VQ4000 manifolds, and stations left empty after a valve is removed during a line change. Ordering Order by the full code VVQ4000-10A-1. Blanking plates are series-specific — a VQ4000 plate will not seal a VQ1000, VQ2000 or VQ5000 manifold. Tell us your manifold model and we will confirm the matching plate. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2WA20-20D — CQ2W Z series compact cylinder, ø20 bore with 20 mm stroke, double acting with a rod at both ends. The rod passes right through the body, so the load stays square without an external guide. Specification — CQ2WA20-20D Series CQ2W Z (compact cylinder, double rod) Bore ø20 mm Stroke 20 mm Action Double acting, double rod Mounting A — both ends tapped Magnet None (CDQ2W prefix for auto switch versions) Fluid Air Product weight 134 g Why the double rod version With a rod supported at both ends, the piston cannot twist under an off-centre load, so a separate guide is often unnecessary. The second rod also gives a mounting point for a sensor dog or a stop, and the equal areas on both sides mean the same force and speed in each direction. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces (two faces on ø12 to ø25) and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Part numbers with mounting bolts included and with a rod end fitting fitted

Read more less

SMC AS4000-04 — AS series speed controller, in-line type, body size 4. Meter-out flow control with threaded ports, sized for large-bore cylinders where a push-in fitting type would choke the flow. Specification — AS4000-04 Type Speed controller, in-line, straight Body size 4 (1/2 class) Port size Rc 1/2 Control Meter-out Fluid Air Operating pressure 0.05 to 1.0 MPa Proof pressure 1.5 MPa Fluid temperature −5 to 60 °C Free flow C = 4.6 dm³/(s·bar), b = 0.35 Controlled flow C = 4.6 dm³/(s·bar), b = 0.20 Lock nut Hexagon lock nut Product weight 205 g Why the in-line type The body sits in the tube run rather than in the cylinder port, so the speed can be trimmed from a point the operator can reach. With Rc 1/2 ports and a free-flow C value of 4.6, it passes enough air for large-bore cylinders without becoming the restriction itself. Typical use Speed control on large cylinders, presses and gate actuators, and any circuit where the cylinder port is buried inside a machine frame. Ordering Order by the full code AS4000-04. The first digits give the body size and the suffix gives the port size, so one character changes the part. Need another port size in the AS4000 range, or the elbow and universal styles? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2A20-30DM — CQ2 Z series compact cylinder, ø20 bore with 30 mm stroke, double acting single rod. The A mounting gives tapped holes at both ends, so the cylinder can be bolted from either face without a bracket. Specification — CQ2A20-30DM Series CQ2 Z (compact cylinder, standard type) Bore ø20 mm Stroke 30 mm Action Double acting, single rod Mounting A — both ends tapped Rod end M — male thread Fluid Air Product weight 143 g About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces (two faces on ø12 to ø25) and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Part numbers with mounting bolts included and with a rod end fitting fitted, which saves ordering them separately Magnet-equipped versions carry the CDQ2 prefix (CDQ2, CDQ2W, CDQ2K, CDQ2KW, CDQP2, CDQ2□S, CDBQ2) Mounting: A or B Both bodies are identical inside. The A type is tapped at both ends for bolting directly to a plate or bracket; the B type has through holes for a bolt passing right through the body. Pick the one that matches the existing fixture — the two are not interchangeable once the plate is drilled. Ordering Order by the full code CQ2A20-30DM. The bore and stroke come first, then the mounting letter, then the rod end and option codes — a single character changes the part, and a magnet-equipped unit needs the CDQ2 prefix rather than CQ2. Need another bore, stroke or mounting style? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2A32-50DZ — CQ2 Z series compact cylinder, ø32 bore with 50 mm stroke, double acting single rod. The whole body is short for its bore, which is what makes it fit stations where a tie-rod cylinder cannot. Specification — CQ2A32-50DZ Series CQ2 Z (compact cylinder, standard type) Bore ø32 mm Stroke 50 mm Action Double acting, single rod Mounting A — both ends tapped Switch groove Z — 4 surfaces (ø32 to ø100) Fluid Air Product weight 309 g About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Part numbers with mounting bolts included and with a rod end fitting fitted, which saves ordering them separately Magnet-equipped versions carry the CDQ2 prefix (CDQ2, CDQ2W, CDQ2K, CDQ2KW, CDQP2, CDQ2□S, CDBQ2) Typical use Clamping, stoppers, lifting jigs, part ejection and any station where panel depth is tight and a standard cylinder will not fit. Ordering Order by the full code CQ2A32-50DZ. The Z suffix marks the switch groove specification, and bore, stroke and mounting letter come first — a single character changes the part. This code has no built-in magnet; for auto switch mounting order the CDQ2 equivalent. Need another bore or stroke? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CD85N10-30-B — C85 series round air cylinder to ISO 6432, ø10 bore with 30 mm stroke, double acting single rod. The CD prefix marks the magnet-equipped body, so auto switches can be clamped anywhere along the tube. Specification — CD85N10-30-B Series C85 (ISO 6432 mini cylinder) Standard ISO 6432 Bore ø10 mm Stroke 30 mm Action Double acting, single rod Magnet Built-in (CD prefix) Mounting B — basic Product weight 39 g Why ISO 6432 matters The mounting dimensions, rod thread and port positions are set by the standard, so an ISO 6432 cylinder from any maker drops into the same bracket. On an old machine with a failed mini cylinder of unknown make, matching bore and stroke to this standard is usually enough to get the right replacement. Features Part numbers available with mounting brackets, rod end fittings and auto switches already specified — no separate ordering Auto switch position is easy to fine-tune along the tube Transparent switch bracket, so the indicator lamp stays visible after mounting Variants: CD85, CD85W (double rod), CD85K (non-rotating), CD85R (direct mount) Typical use Small clamps, gates, ejectors and sensing jigs — anywhere a mini cylinder with position confirmation is needed in a confined space. Ordering Order by the full code CD85N10-30-B. Bore, stroke and mounting are in the code, and the CD prefix is what gives the magnet — a C85 without the D has no magnet and will not work with auto switches. The older C75 series shares the same ISO interface. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC JB40-8-125 — JB series floating joint, sized for ø40 compact cylinders. It absorbs shaft misalignment and out-of-parallel mounting between the rod and the driven part, so the two do not have to be aligned during installation. Specification — JB40-8-125 Series JB (floating joint, compact cylinder type) For cylinder bore ø40 mm Rod thread M8 Overall length 125 mm Product weight 150 g What it does A cylinder rod is made to take axial load, not side load. When the rod and the driven part are even slightly off centre or out of parallel, every stroke pushes the rod sideways, which wears the rod seal and the bushing and eventually bends the rod. A floating joint takes that movement in the joint instead, and removes the alignment work at installation. Typical use Fitted at the rod end of compact cylinders driving slides, gates and jigs — anywhere the cylinder and the load cannot be aligned precisely, or where the load position shifts during the stroke. Ordering Order by the full code JB40-8-125. The first number gives the cylinder bore the joint is designed for, the second the rod thread and the third the length, so all three must match the cylinder. The JB25 size is also available. Tell us your cylinder model and we will confirm the matching joint. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AR30K-03BG-D — AR-D series modular regulator, 3/8" port, with a built-in check valve that lets downstream air escape when the supply is cut (reverse flow function). The D series is the current generation, replacing the discontinued AR(K)-B. Specification — AR30K-03BG-D Series AR20(K)-D to AR60(K)-D (modular regulator, reverse flow) Body size 30 Port size 3/8" Function Reverse flow (built-in check valve) Gauge Round pressure gauge (G), bracket (B) Fluid Air Product weight 270 g Features of the D series Reshaped handle — easier to grip when releasing the lock Choice of gauge: square embedded gauge, round gauge, or digital pressure switch Panel mount compatible with the earlier AR(K)-B series; brackets and set nuts are common to both generations What the reverse flow function does A standard regulator holds pressure downstream even after the supply is shut off. The K version carries a check valve that lets that trapped air escape back through the regulator, so the downstream side drops to zero as soon as the supply is cut. It matters wherever a cylinder or clamp must not stay pressurised after shutdown. Replacing an AR(K)-B unit The D series is the direct successor to the AR(K)-B, which SMC discontinued in March 2025. Panel mounting, brackets and set nuts carry over, so an existing installation usually takes the new unit without rework. Tell us the old code and we will confirm the matching D specification. Ordering Order by the full code AR30K-03BG-D. The K marks the reverse flow function, 03 the port size, and BG the bracket and gauge options — one character changes the part. The 20 and 40 body sizes are available in the same configuration. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC IS10-01-6 — IS10 series pressure switch with R1/8 port. Mechanical switch that outputs a contact signal when line pressure reaches the set point, and mounts directly onto a modular F.R.L. unit. The -6 suffix specifies the lead wire type. Specification — IS10-01-6 Series IS10 (pressure switch) Port size R 1/8 Electrical entry Lead wire (-6) Mounting Direct, or connected to modular F.R.L. units Service life 5 million operations Fluid Air Product weight 62 g Features 16% lighter and 11% smaller than the earlier IS1000 series Rated for 5 million operations Connects into a modular F.R.L. set, so no separate bracket or tee is needed What it is for A pressure switch tells the control system that air is actually present before a cycle starts. Without one, a machine can begin a sequence on low or lost pressure and stall mid-stroke with a part clamped. Mounting it on the F.R.L. set puts the sensing point right after air preparation, where the reading matters. IS10-01 or IS10-01-6 Same switch and same port; the suffix changes the electrical connection. Pick the one that matches the existing wiring — a conduit-entry unit will not drop into a lead-wire installation without rework. Ordering Order by the full code IS10-01-6. For a digital readout instead of a mechanical contact, the ISE series is the equivalent. Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQSB12-10D — CQS series compact cylinder, ø12 bore with 10 mm stroke, double acting single rod. A square-body version of the compact cylinder, shorter overall than the round CQ2 and with auto switch grooves on three or four faces. Specification — CQSB12-10D Series CQS (compact cylinder, square body) Bore ø12 mm Stroke 10 mm Action Double acting, single rod Mounting B — through hole Switch mounting 3 or 4 faces, flush with the body Product weight 36 g CQS or CQ2 Both are compact cylinders. The CQS has a square body and a shorter overall length, and the flat faces make it easier to bolt against a plate without a bracket. The CQ2 covers a wider bore range. At small bores like ø12, the CQS is usually the tighter fit. Features Square body with a shortened overall length Auto switches mount on three or four faces and sit flush — nothing projects beyond the body outline Double clevis brackets and a compact foot bracket available Magnet-equipped versions carry the CDQS prefix (CDQS, CDQSW, CDQSK, CDQSKW, CDQS□S) Ordering Order by the full code CQSB12-10D. Bore, stroke and mounting are all in the code. This code has no built-in magnet; for auto switch mounting order the CDQS equivalent. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2B32-50DMZ — CQ2 Z series compact cylinder, ø32 bore with 50 mm stroke, double acting single rod. Through-hole mounting with a male thread at the rod end, so a clevis or joint screws straight on. Specification — CQ2B32-50DMZ Series CQ2 Z (compact cylinder, standard type) Bore ø32 mm Stroke 50 mm Action Double acting, single rod Mounting B — through hole (standard) Rod end M — male thread Switch groove Z — 4 surfaces (ø32 to ø100) Product weight 352 g Mounting and rod end The B body takes a bolt passing right through, which suits a plate the cylinder sits behind; the A body is tapped at both ends for bolting from either face. The M rod end gives a male thread instead of the standard female thread, so rod-end joints, floating joints and clevises attach without an adapter. Both choices are fixed at the point the plate is drilled, so they are worth confirming against the old unit before ordering. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Magnet-equipped versions carry the CDQ2 prefix Ordering Order by the full code CQ2B32-50DMZ. Bore, stroke, mounting letter, rod end and switch groove are all in the code — a single character changes the part. The 75 mm stroke version (CQ2B32-75DMZ) is also available. Need another bore or stroke? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2B63-75DMZ — CQ2 Z series compact cylinder, ø63 bore with 75 mm stroke, double acting single rod. Through-hole mounting with a male thread at the rod end. Specification — CQ2B63-75DMZ Series CQ2 Z (compact cylinder, standard type) Bore ø63 mm Stroke 75 mm Action Double acting, single rod Mounting B — through hole (standard) Rod end M — male thread Switch groove Z — 4 surfaces (ø32 to ø100) Product weight 1,216 g Force and mounting At ø63 the cylinder develops roughly 1,870 N at 0.6 MPa, and at 1.2 kg it is heavy enough that the mounting has to carry both the weight and the reaction. Through-hole mounting spreads that into the plate rather than into tapped threads, which is the right choice at this size — check plate thickness and bolt grade against the thrust before fitting. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush Double clevis brackets and a compact foot bracket are available Magnet-equipped versions carry the CDQ2 prefix Ordering Order by the full code CQ2B63-75DMZ. Bore, stroke, mounting, rod end and switch groove are all in the code. The 15 mm and 40 mm stroke versions in the same bore are also available. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC ASV410F-01-08S — ASV series quick exhaust controller. A quick exhaust valve and a metering orifice built into one body, so the cylinder dumps its air locally instead of pushing it back through the solenoid valve. Specification — ASV410F-01-08S Series ASV (quick exhaust controller) Body size 410 Thread R 1/8 Tube O.D. ø8 mm Function Quick exhaust valve + exhaust metering in one body Product weight 39 g What it does Normally the exhaust air from a cylinder travels back down the tube to the valve before it reaches atmosphere, and that return path limits how fast the cylinder can move. A quick exhaust controller vents at the cylinder port instead, and the built-in orifice still lets the speed be set. Fitting one is usually cheaper than moving to a larger valve and bigger tube. Typical use High-speed cylinders, ejectors, blow-off and any axis where the cycle time is limited by exhaust rather than supply. Ordering Order by the full code ASV410F-01-08S. The thread and tube size are both in the code, and the same body is offered in other combinations. Need another thread or tube size in the ASV range? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2B40-25DMZ — CQ2 Z series compact cylinder, ø40 bore with 25 mm stroke, double acting single rod. A short stroke on a large bore, which gives high force in a body only a little longer than the bore itself. Specification — CQ2B40-25DMZ Series CQ2 Z (compact cylinder, standard type) Bore ø40 mm Stroke 25 mm Action Double acting, single rod Mounting B — through hole (standard) Rod end M — male thread Switch groove Z — 4 surfaces (ø32 to ø100) Product weight 323 g Where a short stroke on a big bore is used Clamping and pressing need force, not travel. A ø40 bore at 25 mm stroke delivers roughly 2.5 times the thrust of a ø25 cylinder while adding very little length, so it suits fixtures where the part only has to move a few millimetres but has to be held firmly. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Magnet-equipped versions carry the CDQ2 prefix Ordering Order by the full code CQ2B40-25DMZ. Bore, stroke, mounting letter, rod end and switch groove are all in the code — a single character changes the part. This code has no built-in magnet; for auto switch mounting order the CDQ2 equivalent. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as

Read more less

SMC AK4000-04 — AK series check valve, body size 4000 with Rc 1/2 ports. Allows flow in one direction and blocks it in the other, with no external control needed. Specification — AK4000-04 Series AK (check valve) Body size 4000 Port size Rc 1/2 Function One-way flow, free flow one direction / blocked the other Fluid Air Product weight 140 g What it does A check valve holds pressure on one side of a circuit when the supply drops. On a vertical cylinder it stops the load falling when air is lost; on a branched line it stops one station bleeding air back into another when that branch exhausts. Typical use Vertical axes that must hold position on supply failure, air tank and receiver lines, and any branch that must not lose air to a neighbouring circuit. Ordering Order by the full code AK4000-04. The first number gives the body size and the suffix gives the port thread, so one character changes the part. Need another port size in the AK range, or a pilot-operated check valve instead? Send the code and quantity and we will quote it. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CU32-70A — CU series free mount cylinder, ø32 bore with 70 mm stroke, with air cushions at both ends. The body can be bolted directly from several faces, so no mounting bracket is needed. Specification — CU32-70A Series CU (free mount cylinder) Bore ø32 mm Stroke 70 mm Cushion Air cushion Mounting Direct, multiple faces Product weight 704 g Free mounting Most cylinders need a foot, flange or clevis bracket, and that bracket adds length and cost and has to be ordered separately. The CU body carries tapped holes on several faces, so it bolts straight onto whichever surface the machine offers. On a retrofit into an existing frame that usually decides whether the cylinder fits at all. Air cushion At 70 mm of stroke the piston arrives at the end cover with real momentum. The air cushion decelerates it over the last few millimetres instead of letting it hit, which cuts the knock at each cycle and extends the life of the cylinder. On a rubber bumper cylinder the impact is absorbed rather than avoided, so for repeated high-speed work the air cushion is the better choice. Typical use Transfer, pushing and gate work inside machine frames where there is no room for a bracket. Ordering Order by the full code CU32-70A. Bore, stroke and cushion are all in the code. This code has no built-in magnet; for auto switch mounting order the CDU equivalent — the family covers CDU, CDUW (double rod), CDUK (non-rotating), CDUKW, CDU-A and ZCDUK. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AMC310-03B — AMC series exhaust cleaner with 3/8" port. It silences valve exhaust and captures the oil mist that comes out with it, recovering more than 99.9% of the oil instead of spraying it into the work area. Specification — AMC310-03B Series AMC (exhaust cleaner) Body size 310 Port size 3/8" Noise reduction 35 dB(A) Oil mist recovery 99.9% or more Product weight 200 g Why fit one instead of a plain silencer A standard silencer only deals with the noise. On a lubricated circuit the exhaust also carries oil mist, which settles on the machine, the floor and the product. An exhaust cleaner traps that oil in an element and drains it, so the working area stays clean and the air discharge meets housekeeping requirements. The 35 dB(A) reduction covers the noise side at the same time. Typical use Valve manifold exhausts on lubricated circuits, food and packaging lines where oil carry-over is unacceptable, and enclosed cells where operators work next to the exhaust point. Ordering Order by the full code AMC310-03B. The body size and port thread are both in the code, and the suffix gives the mounting option. Replacement elements are ordered separately — tell us the housing code and we will confirm the matching element. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2B32-75DMZ — CQ2 Z series compact cylinder, ø32 bore with 75 mm stroke, double acting single rod. Through-hole mounting with a male thread at the rod end, so a clevis or joint screws straight on. Specification — CQ2B32-75DMZ Series CQ2 Z (compact cylinder, standard type) Bore ø32 mm Stroke 75 mm Action Double acting, single rod Mounting B — through hole (standard) Rod end M — male thread Switch groove Z — 4 surfaces (ø32 to ø100) Product weight 497 g Stroke and body length At 75 mm this is a long stroke for a compact cylinder — the body is still far shorter than a tie-rod unit of the same bore and stroke, which is the reason to choose the series, but the overall length is no longer negligible. Where the mounting depth is very tight, the 50 mm stroke version (CQ2B32-50DMZ) saves 25 mm. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Magnet-equipped versions carry the CDQ2 prefix Ordering Order by the full code CQ2B32-75DMZ. Bore, stroke, mounting letter, rod end and switch groove are all in the code — a single character changes the part. This code has no built-in magnet; for auto switch mounting order the CDQ2 equivalent. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2WA40-75DZ — CQ2W Z series compact cylinder, ø40 bore with 75 mm stroke, double acting with a rod at both ends. Tapped at both ends for mounting from either face. Specification — CQ2WA40-75DZ Series CQ2W Z (compact cylinder, double rod) Bore ø40 mm Stroke 75 mm Action Double acting, double rod Mounting A — both ends tapped Switch groove Z — 4 surfaces (ø32 to ø100) Product weight 749 g Long stroke on a double rod body Most double rod cylinders are chosen for short, guided moves. At 75 mm the rod is long enough that the second bearing earns its place — the piston stays square through the whole travel instead of cocking near the end, which is where a single rod cylinder starts to wear its seal unevenly. Why the double rod version With a rod supported at both ends the piston cannot twist under an off-centre load, so a separate guide is often unnecessary. The second rod gives a mounting point for a sensor dog or a stop, and equal areas on both sides mean the same force and speed in each direction. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush Double clevis brackets and a compact foot bracket are available Magnet-equipped versions carry the CDQ2W prefix Ordering Order by the full code CQ2WA40-75DZ. The W marks the double rod body, then bore, stroke and mounting. The ø40 short stroke (CQ2WB40-25DZ) and ø32 (CQ2WA32-50DMZ) are available in the same family. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2B63-40DZ — CQ2 Z series compact cylinder, ø63 bore with 40 mm stroke, double acting single rod. Large bore in a short body, giving high thrust where a tie-rod cylinder would not fit. Specification — CQ2B63-40DZ Series CQ2 Z (compact cylinder, standard type) Bore ø63 mm Stroke 40 mm Action Double acting, single rod Mounting B — through hole (standard) Rod end Female thread (standard) Switch groove Z — 4 surfaces (ø32 to ø100) Product weight 727 g Force and stroke At ø63 the piston area gives roughly 1,870 N at 0.6 MPa. With 40 mm of stroke this covers work that needs both force and a little travel — pressing, lifting a fixture clear, or driving a gate that has to open wide enough to pass a part. Rod end thread This code has the standard female thread at the rod end. The M variants (for example CQ2B63-15DMZ) give a male thread instead, which accepts joints and clevises directly. Check which the existing installation uses before ordering — an adapter adds length the mounting may not have. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush Double clevis brackets and a compact foot bracket are available Magnet-equipped versions carry the CDQ2 prefix Ordering Order by the full code CQ2B63-40DZ. Bore, stroke, mounting and switch groove are all in the code. At this weight the cylinder needs proper support — check the mounting bolts and plate thickness against the

Read more less

SMC VT307-5DZ1-01F-F-Q — VT307 series 3-port solenoid valve, direct operated poppet type with elastomer seal and Rc 1/8 ports. Universal porting lets one valve cover normally closed, normally open and diverter duty. Specification — VT307-5DZ1-01F-F-Q Series VT307 (3-port solenoid valve) Construction Direct operated poppet, elastomer seal Port size Rc 1/8 (01F) Power consumption 1.8 W Main valve rubber HNBR — low concentration ozone resistant Manifold VV307 Product weight 207 g Ozone resistance Ordinary NBR seals harden and crack under long exposure to low concentration ozone, which is generated by motors, UV lamps and some water treatment equipment. The HNBR main valve seal used here resists that attack, so the valve keeps sealing in environments where a standard valve would fail early. Universal porting Most 3-port valves are built as either normally closed or normally open and carry different part numbers. A universal port valve is piped to give whichever function is needed, and can work as a diverter feeding two lines alternately — one spare covers three roles. Interchangeable with the previous generation Mounting dimensions match the earlier VT307, so an existing installation takes the new valve without rework. Ordering Order by the full code VT307-5DZ1-01F-F-Q. Coil voltage, electrical entry and port thread are all in the suffix — confirm each against the valve being replaced. The VV307 manifold is quoted separately. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC CQ2WB40-25DZ — CQ2W Z series compact cylinder, ø40 bore with 25 mm stroke, double acting with a rod at both ends. The rod passes right through the body, so the load stays square without an external guide. Specification — CQ2WB40-25DZ Series CQ2W Z (compact cylinder, double rod) Bore ø40 mm Stroke 25 mm Action Double acting, double rod Mounting B — through hole (standard) Switch groove Z — 4 surfaces (ø32 to ø100) Product weight 396 g Why the double rod version With a rod supported at both ends, the piston cannot twist under an off-centre load, so a separate guide is often unnecessary. The second rod gives a mounting point for a sensor dog or a stop, and the equal areas on both sides mean the same force and speed in each direction — useful where a clamp must release with the same force it applies. Short stroke, large bore A ø40 bore at 25 mm stroke delivers high thrust in a body barely longer than the bore, which suits pressing and clamping where the part only has to move a few millimetres but must be held firmly. About the CQ2 Z series Lineup from ø4 to ø200, with ø4, ø6 and ø10 recently added 5 to 13% lighter than the previous CQ2 generation Auto switches mount on four faces at this bore and sit flush, with no projection outside the body Double clevis brackets and a compact foot bracket are available Magnet-equipped versions carry the CDQ2W prefix Ordering Order by the full code CQ2WB40-25DZ. The W marks the double rod body, then bore, stroke and mounting letter — a single character changes the part. This code has no built-in magnet; for auto switch mounting order the CDQ2W equivalent. The ø20 size (CQ2WA20-20D) is also available. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less

SMC AR20K-F02BE-D — AR-D series modular regulator, 1/4" port, with a built-in check valve that lets downstream air escape when the supply is cut. The D series is the current generation, replacing the discontinued AR(K)-B. Specification — AR20K-F02BE-D Series AR20(K)-D to AR60(K)-D (modular regulator, reverse flow) Body size 20 Port size 1/4" Function Reverse flow (built-in check valve) Gauge Square embedded pressure gauge (E), bracket (B) Fluid Air Product weight 140 g Features of the D series Reshaped handle — easier to grip when releasing the lock Choice of gauge: square embedded gauge, round gauge, or digital pressure switch Panel mount compatible with the earlier AR(K)-B series; brackets and set nuts are common to both generations Embedded gauge or round gauge The embedded square gauge sits flush in the regulator body, so nothing projects into the panel space and the reading is taken from the front. The round gauge stands proud on top and is easier to read from an angle. Both cover the same pressure range — the choice is about where the operator stands. Replacing an AR(K)-B unit The D series is the direct successor to the AR(K)-B, discontinued by SMC in March 2025. Panel mounting, brackets and set nuts carry over, so an existing installation usually takes the new unit without rework. Tell us the old code and we will confirm the matching D specification. Ordering Order by the full code AR20K-F02BE-D. The K marks the reverse flow function, F02 the port thread, and BE the bracket and embedded gauge — one character changes the part. The AR20K-02BG-D (round gauge) and AR30K-03BG-D (3/8") are available in the same family. Supply from Korea Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.

Read more less