3.Peaks
3.Peaks 3.Peaks Diagonal Cutting Nippers Long Blade
To wire rod and plastic cutting. It is the largest Nippa in the stainless steel series. Even if it is big, the weight is lighter than the forged product of the same size.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 52 to 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0358 LS-01 165 ● □ 95 1.6 ※ grip: ● = elastomer □ = plastic spring
$33.90
3.Peaks 3.Peaks Top Cutter
A blade enters directly directly above. Reverse hand handling possible. You can cut deep places. We have prepared 4 different blade widths according to your work.◦ Elastic elastomer resin grip which is familiar to hand◦ Coil spring for easy continuous operation◦ Open too much with prevention pin (※ TC - 10Z only) material Chrome vanadium steel * TC-10 only use S58C Hardness (HRC) 52 ~ 60 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) Blade Wide （mm） Material Spring （g） Plastic mm 217-1269 TC-3Z 140 ● ◎ 125 2.0 3.0 217-1278 TC-5Z 140 ● ◎ 125 3.0 5.0 217-0400 TC-7Z 140 ● ◎ 130 4.0 7.0 217-1287 TC-10Z 150 ● ◎ 155 4.0 10.0 ※ grip: ● = elastomer ◎ = coil spring
$33.50
3.Peaks 3.Peaks Diagonal Cutting Nippers Heavy Duty SN-130
Small class maximum cutting ability. High precision and beautiful cut surface. We used the same top quality steel as the power nipper and finished the blade with extremely high precision. With outstanding sharpness, it corresponds to piano wire · hard steel wire. It is a beautiful and sharp cut surface. * Custom made cutting of Kevlar fiber is also possible. Please contact us.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material SK 85 (SK 5) Hardness (HRC) 62 ~ 67 (blade part) Blade angle 13° JIS - PAT. ○ Product Code. Part number Nominal size grip weight Cutting Capacity(mm) （mm） Material Spring （g） Wire Copper Wire Piano Wire 217-0288 SN-130 130 ● □ 90 2 3.2 0.5 ※ grip: ● = elastomer □ = plastic spring
$66.00
3.Peaks 3.Peaks Plastic Cutting Nippers Corner
Blade angle 42 °. The blade enters from an oblique direction. Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 42° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic 217-1339 EP-115 115 ■ ◎ 55 1.5 217-1348 EP-115R 115 ■ ◎ 55 1.5 ※ Grip: ■ = Vinyl ◎ = Coil spring
$27.90
3.Peaks 3.Peaks Long Nose Pliers Micro MR-120
Thin and long tip shape. It is a preeminent grasp feeling. With exquisite weight balance and high precision tip, grasp fine wire and parts securely.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0668 MR-120 120 ■ ◎ 60 2.6 217-0677 MR-150 150 ■ ◎ 85 2.6 ※ Grip: ■ = Vinyl ◎ = Coil spring
$22.10
3.Peaks 3.Peaks Plastic Cutting Nippers Angle
Blade angle 37 °. The blade enters from an oblique direction. Blade angle 37 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With a stopper for preventing stiffness ◦ With too much prevention pin included material Vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight （mm） Material Spring （g） 217-0561 AP-125 G-S 125 ■ ◎ 105 217-0570 AP-150 G-S 150 ■ ◎ 155 ※ Grip: ■ = Vinyl ◎ = Coil spring
$29.60
3.Peaks 3.Peaks Diagonal Cutting Nippers Corner
The blade enters from an oblique direction. Reverse hand handling possible. Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ SM-06: Easy fit to hand Elastomer resin grip / Plastic spring (durability about 10 times compared to our company) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 42 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0446 SM-06 115 ● □ 55 1.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring
$28.70
3.Peaks 3.Peaks Diagonal Cutting Nippers Mid SP-42
Blade angle 60 °. You can reverse hand. Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 60 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic Copper Wire Wire 217-0756 SP-42 150 ● □ 68 4.0 1.6 1.0 ※ grip: ● = elastomer □ = plastic spring
$34.20
3.Peaks 3.Peaks Round Nose Pliers
Rounding / Making a wheel / Pinch A thinner tip than the round nose pliers (SM - 08). There is no cutting ability. No tip nicks.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 48 to 53 (main unit) Product Code. Part number Nominal size grip weight （mm） Material Spring （g） 217-1542 SP-37 140 ● □ 50 ※ grip: ● = elastomer □ = plastic spring
$20.40
3.Peaks 3.Peaks Pliers Bent Type SP-35
Type angle 45 °. Pick up / pinch / line up The tip is thicker than the long first song radio pliers. There is no cutting ability. No tip nicks.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 48 to 53 (main unit) Blade angle 45 ° Product Code. Part number Nominal size grip weight （mm） Material Spring （g） 217-1205 SP-35 150 ● □ 55 ※ grip: ● = elastomer □ = plastic spring
$20.40
3.Peaks 3.Peaks Diagonal Cutting Nippers Wire
Dedicated tool developed jointly with modeling artists. Weight reduction to make it easy for children and women to handle. I stuck with balance and finishing. Please enjoy the world of wire crafts with crafted pliers with a scored tip that is hard to scratch and craft nippers with safety considerations.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company material Vanadium steel Hardness (HRC) 56 - 64 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Aluminum Copper Wire 217-0330 CR-01 130 ● □ 85 4.0 2.6 ※ grip: ● = elastomer □ = plastic spring
$27.80
3.Peaks 3.Peaks Long Nose Pliers for Wire
Dedicated tool developed jointly with modeling artists. Weight reduction to make it easy for children and women to handle. I stuck with balance and finishing. Please enjoy the world of wire crafts with crafted pliers with a scored tip that is hard to scratch and craft nippers with safety considerations.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Chrome vanadium steel Hardness (HRC) 54 - 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-0349 CR-02 150 ● □ 100 1.2 2.6 ※ grip: ● = elastomer □ = plastic spring
$27.80
3.Peaks 3.Peaks Plastic Cutting Nippers Long
It is exclusively for plastic. Metal wire can not be cut. The largest plastic nippers in the stainless steel series. Even if it is big, the weight is lighter than the forged product of the same size.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 52 ~ 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic 217-0279 LS-02 165 ● □ 95 5.0 ※ grip: ● = elastomer □ = plastic spring
$34.00
3.Peaks 3.Peaks Cable Cutter
Cable (IV) wire 60 mm² can be cut. With a sharp blade, cut the cable wire. It's a beautiful cut. Only for copper wire cutting.◦ Vinyl grip with easy-to-purchase price material S58C Hardness (HRC) 50 ~ 55 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） IV㎟ Copper Wire 217-1375 KC-22 160 ■ - 170 22.0 9.2 217-1384 KC-60 235 ■ - 365 60 (￠13.6) 13.6 ※ Grip: ■ = Vinyl
$28.80
3.Peaks 3.Peaks Top Cutter Mini
Small top cutter. A blade enters directly directly above. You can cut deep places.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire spring exchange) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) Blade Wide （mm） Material Spring （g） Plastic mm 217-1296 MTC-3 115 ■ ◎ 50 1.5 3.0 217-1302 MTC-5 115 ■ ◎ 50 1.5 5.0 ※ Grip: ■ = Vinyl ◎ = Coil spring
$31.80
3.Peaks 3.Peaks Long Nose Pliers Bent
Tip angle 45 °. Function to cut · With a type with a type. It is what the bent form of a standard shape radio pliers.◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 45 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-1490 RP-150 BG 150 ■ - 135 1.5 2.6 ※ Grip: ■ = Vinyl
$22.40
3.Peaks 3.Peaks Diagonal Cutting Nippers Micro
Small head and blade angle 22 ° makes it easy to enter a narrow place. Nippa series only blade angle 22 °. It has a total length of 125 mm, and it corresponds to a detailed and intricate work.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 22 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0589 MP-125 G-S 125 ■ ◎ 65 2.0 ※ Grip: ■ = Vinyl ◎ = Coil spring
$23.40
3.Peaks 3.Peaks Plastic Cutting Nippers PNP-190G-S
Staple items. Flat and Earl, two kinds of blade surface shape. Despite being a standard product, we pursued the shape and structure until the limit. A sharp blade finished by hand.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Vinyl grip with easy-to-purchase price◦ Coil spring for easy continuous operation◦ Stopper with stick preventive (blade back)◦ Blade opening adjustment function (* nominal size 190 mm model number only) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic 217-0738 PNP-190 G-S 190 ■ ◎ 220 8.0 ※ Grip: ■ = Vinyl ◎ = Coil spring
$35.50
3.Peaks 3.Peaks Plastic Cutting Nippers PNP-125G-S
Staple items. Flat and Earl, two kinds of blade surface shape. Despite being a standard product, we pursued the shape and structure until the limit. A sharp blade finished by hand.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Vinyl grip with easy-to-purchase price◦ Coil spring for easy continuous operation◦ Stopper with stick preventive (blade back) material S58C Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic 217-0233 PNP-125 G-S 125 ■ ◎ 95 5.0 217-0206 PNP-150G-S 150 ■ ◎ 150 5.0 ※ Grip: ■ = Vinyl ◎ = Coil spring
$24.80
3.Peaks 3.Peaks Diagonal Cutting Nippers Mid SP-41
To wire rod and plastic cutting. Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic Copper Wire Wire 217-0747 SP-41 150 ● □ 68 4.0 2.0 1.2 ※ grip: ● = elastomer □ = plastic spring
$34.20
3.Peaks 3.Peaks Diagonal Cutting Nippers Bent
Blade angle 60 °. You can reverse hand. Because the blade has a large angle, it is suitable for cutting narrow spots.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 60 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0163 SP-32 130 ● □ 45 1.0 ※ grip: ● = elastomer □ = plastic spring
$20.70
3.Peaks 3.Peaks Diagonal Cutting Nippers Mini SP-31
With "lead stopper" attached to prevent scattering of cut ends. Due to the lead stopper, the cut wire will not scatter. It is safe to work because there is no need to drop the cut end to the floor and surroundings.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 20 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0154 SP-31 130 ● □ 45 1.6 ※ grip: ● = elastomer □ = plastic spring
$20.60
3.Peaks 3.Peaks Long Nose Pliers Lightweight LR-125S
Industry's lightest! It is the lightness of shock. Develop from customer's voice. We succeeded in reducing the weight of our conventional product (RP) to a total weight of about 74% (LR - 150 S) to 83% (LR - 125 S).◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle - - JIS - - PAT. ○ ○ Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm) Material Spring （g） wire copper wire 217-0686 LR-125S 125 ● □ 83 1.5 2.6 217-0695 LR-150S 150 ● □ 100 1.5 2.6 ※ grip: ● = elastomer □ = plastic
$22.60
3.Peaks 3.Peaks Plastic Cutting Nippers LBS Type
3.Peaks Plastic Cutting Nippers LBS TypeCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 150 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$26.70
3.Peaks 3.Peaks Mini Flat Nose Pliers for Beading
3.Peaks Mini Flat Nose Pliers for BeadingPrecision pliers for fine assembly, jewellery making and small component handling.Key Features Smooth or shaped jaws suited to delicate work Compact size for bench and detail work Specifications Overall Length (mm) 115 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$27.30
3.Peaks 3.Peaks Mini Round Long Nose Pliers for Beading
3.Peaks Mini Round Long Nose Pliers for BeadingLong nose pliers reach into confined spaces and hold small components where fingers cannot get access.Key Features Tapered jaws reach past obstructions Suited to electronics, wiring and fine assembly work Specifications Overall Length (mm) 115 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$27.30
3.Peaks 3.Peaks Cable Tie Nippers
3.Peaks Cable Tie NippersCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Available Sizes KBP-125Z-S KBP-150Z-S Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 133 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$24.00
3.Peaks 3.Peaks Resin Grip Pliers
3.Peaks Resin Grip PliersLocking pliers clamp onto a workpiece and hold under spring tension, freeing both hands for welding, cutting or assembly.Key Features Adjustable clamping force set by the rear screw Quick release lever frees the jaws under load Specifications Overall Length (mm) 115 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$29.70
3.Peaks 3.Peaks Mini Nippers for Beading
3.Peaks Mini Nippers for BeadingCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 100 Copper Wire (mm) 1.6 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$27.30
3.Peaks 3.Peaks Diagonal Cutting Nippers Heavy Duty DN-165
3.Peaks Diagonal Cutting Nippers Heavy Duty DN-165Cutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Available Sizes 165MM (DN-165) 195MM (DN-195) 215MM (DN-215) Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 165 Copper Wire (mm) Φ 3.2 Steel Wire (mm) Φ 2.0 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$39.60
3.Peaks 3.Peaks Plastic Cutting Nippers PNP-125G-SR
3.Peaks Plastic Cutting Nippers PNP-125G-SRCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Available Sizes 125MM (PNP-125G-S-R) 150MM (PNP-150G-S-R) 190MM (PNP-190G-S-R) Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 125 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$25.60
3.Peaks 3.Peaks Plastic Cutting Nippers KPN-125G-S
3.Peaks Plastic Cutting Nippers KPN-125G-SCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Available Sizes KPN-125G-S KPN-150G-S Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 132 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$28.50
3.Peaks 3.Peaks Long Nose Pliers TP-150G
3.Peaks Long Nose Pliers TP-150GLong nose pliers reach into confined spaces and hold small components where fingers cannot get access.Available Sizes TP-150G TP-150G-S Key Features Tapered jaws reach past obstructions Suited to electronics, wiring and fine assembly work Specifications Overall Length (mm) 150 Copper Wire (mm) 2.6 Steel Wire (mm) 1.5 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$19.60
3.Peaks 3.Peaks Wire Clamp Cutter WCC-250-2H
3.Peaks Wire Clamp Cutter WCC-250-2HClamps hold work securely during welding, gluing, machining or assembly.Key Features Holds work square and steady while both hands stay free Clamping range varies by model — see specifications Specifications Overall Length (mm) 250 Cutting Capacity (mm) 3 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$74.90
3.Peaks 3.Peaks Diamond Grip Pliers Screw Extractor DS-200T
3.Peaks Diamond Grip Pliers Screw Extractor DS-200TLocking pliers clamp onto a workpiece and hold under spring tension, freeing both hands for welding, cutting or assembly.Available Sizes 200MM (DS-200T) 165MM (DS-165T) Key Features Adjustable clamping force set by the rear screw Quick release lever frees the jaws under load Specifications Overall Length (mm) 200 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$31.00
3.Peaks 3.Peaks Diagonal Cutting Nippers Multi-Purpose
3.Peaks Diagonal Cutting Nippers Multi-PurposeCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Available Sizes KB-125S KB-150S KB-175 Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 125 Copper Wire (mm) 2.6 Steel Wire (mm) 1.5 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$33.80
3.Peaks 3.Peaks Slim Plastic Cutting Nippers
With the longest blade of the series, we surely pinch a wide range of materials and cut. We extended the blade length and narrowed the blade width. It reaches deep into the narrow part. Blade finished thin and sharp precision machining is outstanding.◦ Easy to enter power, easy to grip◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 7° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic 217-1560 SPN-145S 145 ● □ 80 3.0 217-1579 SPN-165S 165 ● □ 115 5.0 ※ grip: ● = elastomer □ = plastic
$40.60
3.Peaks 3.Peaks Plastic Spring
3.Peaks Plastic SpringA specialist tool used in electrical installation and sheet metal work.Available Sizes S-03 S-04 Key Features Purpose-built for its specific installation task Sizes and capacities vary by model — see specifications About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$4.80
3.Peaks 3.Peaks Flat Nose Pliers Short Type
Bend / grab / pinch / hold Tightly grasp the wide tip. There is no cutting ability. No tip nicks.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 48 to 53 (main unit) Product Code. Part number Nominal size grip weight （mm） Material Spring （g） 217-1533 SP-36 140 ● □ 50 ※ grip: ● = elastomer □ = plastic spring
$19.80
3.Peaks 3.Peaks Pliers Flat SP-34
Grasp / pinch / pull / piss in The tip is thicker than the long stainless steel radio pliers. There is no cutting ability. No tip nicks.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 48 to 53 (main unit) Product Code. Part number Nominal size grip weight （mm） Material Spring （g） 217-1199 SP-34 150 ● □ 55 ※ grip: ● = elastomer □ = plastic spring
$19.90
3.Peaks 3.Peaks Diagonal Cutting Nippers Mid SP-43
It is exclusively for plastic. Metal wire can not be cut. Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic 217-0774 SP-43 150 ● □ 68 4.0 ※ grip: ● = elastomer □ = plastic spring
$34.20
3.Peaks 3.Peaks Plastic Cutting Nippers Mini MK-02
Ideal for gate, runner, burr cutting. For plastic only. We have developed specialized in modeling. With our unique design blades, you can get a beautiful cutting surface that is still smooth and has a few cutting residue. Easy to delicate work, sticking to lightness and ease of holding so much hands are less tired even for a long time.◦ The angle of the blade with respect to the handle is 7 °. Working place is easy to see, work is possible in natural posture, it will help to increase efficiency◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 7 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic 217-0853 MK-02 120 ● □ 58 3.0 ※ grip: ● = elastomer □ = plastic
$34.40
3.Peaks 3.Peaks Plastic Cutting Nippers Mini MK-01
For more information, It can also correspond to brass wire and copper wire. We have developed specialized in modeling. With our unique design blade, you can get a beautiful cutting surface that is still smooth and not scraped off, yet unprecedented. The angle of the blade is with respect to the handle is 7 °. It is important to understand that it is possible to work in a natural posture.◦ The angle of the blade is 7 °. It is the gentle angle in Nippa series◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 7 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Plastic Copper Wire 217-0844 MK-01 120 ● □ 58 3.0 1.0 ※ grip: ● = elastomer □ = plastic spring
$34.40
3.Peaks 3.Peaks Diagonal Cutting Nippers Green Cutting
3.Peaks Diagonal Cutting Nippers Green CuttingCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Available Sizes GN-200J GN-200 GC-200 Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 200 Copper Wire (mm) 4 Steel Wire (mm) 4 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$20.40
3.Peaks 3.Peaks Wire Clamp Cutter WCC-200
Wire rope (3.0 mm) cuttable. Clamp tube crimping function included. Cut the wire rope with two blades on the left and right and crimp the various clamp pipes (oval sleeve, Dalma tube, Eight tube) with the tip hole. The cutting performance of the two blades is the same, and if it is used alternately, the consumption of the blade can be reduced.◦ With handle lock◦ Easy to purchase price, easy to grasp vinyl grip (※ WCC - 200, WCC - 250 - 2 H)◦ Fall prevention strap mounting hole available (※ WCC - 250 only)◦ Cutting edge (both ends) with adjustment screw: Corresponding spanner 13 mm material Vanadium steel Hardness (HRC) 60 ~ 65 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) Clamping （mm） Material Spring （g） Wire mm 217-0604 WCC-200 200 ■ ○ 285 1.5 SS.S.0.27~1.0 217-0613 WCC-250 250 ▲ ○ 380 3.0 0.27~1.5 ※ Grip: ■ = Vinyl ▲ = Steel ○ = Spring
$43.80
3.Peaks 3.Peaks Diagonal Cutting Nippers Angle Cutting DNP-125G
3.Peaks Diagonal Cutting Nippers Angle Cutting DNP-125GCutting pliers shear wire and small stock between hardened edges, with the cutting geometry set by the intended material.Available Sizes 125MM (DNP-125GH) 150MM (DNP-150GH) Key Features Hardened cutting edges for repeated use Cutting capacity varies by model — see specifications Specifications Overall Length (mm) 125 Copper Wire (mm) 2 Steel Wire (mm) 1.2 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About 3.Peaks3.Peaks is a Japanese manufacturer of nippers, pliers and precision cutting tools.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request
$28.40
3.Peaks 3.Peaks Wire Cutter
Only for wire rope cutting. With a sharp blade, you can cut the wire rope. It's a scarce and beautiful cut edge.◦ With handle lock◦ Vinyl grip with easy-to-purchase price◦ With cutting edge adjustment screw: Corresponding spanner 10 mm material Vanadium steel Hardness (HRC) 60 ~ 65 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire 217-0598 WC-165 165 ■ ○ 180 4.0 ※ Grip: ■ = Vinyl ○ = Spring
$35.40
3.Peaks 3.Peaks Pliers Round
Rounding / Making a wheel / Pinch Because of the conical shape, you can make various sizes of small and small. There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-08: Easy-fitting elastomer resin / Plastic spring (durability about 10 times higher than our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm） Material Spring （g） 217-0516 SM-08 115 ● □ 60 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring
$23.40
