NSK Cylindrical Roller Bearings

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2338M ,D=190   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2338M 190 400 132 5 5 240 　 1770 2520 1400 　 1300 1600 85     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2336M ,D=180   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2336M 180 380 126 4 4 227 　 1560 2220 1500 　 1300 1700 73.7     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2334M ,D=170   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2334M 170 360 120 4 4 216 　 1490 2070 1600 　 1400 1800 62.6   DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2332M ,D=160   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2332M 160 340 114 4 4 204 　 1310 1820 1800 　 1500 1900 53.2     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2330M ,D=150   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2330M 150 320 108 4 4 193 　 1160 1600 2000 　 1600 2000 44.6     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2328M ,D=140   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2328M 140 300 102 4 4 180 　 1020 1380 2200 　 1700 2200 37.2   DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2326M ,D=130   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2326M 130 280 93 4 4 167 　 920 1230 2400 　 1900 2400 29.6     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2324M ,D=120   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2324M 120 260 86 3 3 154 　 795 1030 2600 　 2000 2600 23.5     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2320W ,D=100   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2320W 100 215 73 3 3 127.5 　 570 715 3400 　 2400 3000 13.4     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2319W ,D=95   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2319W 95 200 67 3 3 121.5 　 460 585 3800 　 2600 3400 10.6     DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2318W ,D=90   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2318W 90 190 64 3 3 113.5 　 435 535 4000 　 2800 3400 9.08   DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2317W ,D=85   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2317W 85 180 60 3 3 108 　 395 485 4300 　 3000 3800 8.35 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2316W ,D=80   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2316W 80 170 58 2.1 2.1 101 　 355 430 4500 　 3200 4000 6.57 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2315W ,D=75   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2315W 75 160 55 2.1 2.1 95 　 330 395 4800 　 3400 4300 5.57 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2314W ,D=70   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2314W 70 150 51 2.1 2.1 89 　 274 325 5000 　 3600 4500 4.51 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2313W ,D=65   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2313W 65 140 48 2.1 2.1 82.5 　 233 265 5600 　 3800 4800 3.68 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2312W ,D=60   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2312W 60 130 46 2.1 2.1 77 　 222 262 5600 　 4300 5300 3.08 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2311W ,D=55   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2311W 55 120 43 2 2 70.5 　 201 233 6000 　 4500 5600 2.48 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2310W ,D=50   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2310W 50 110 40 2 2 65 　 163 187 6700 　 5000 6300 1.94 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2309W ,D=45   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2309W 45 100 36 1.5 1.5 58.5 　 137 153 7100 　 5300 6700 1.46 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2308W ,D=40   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2308W 40 90 33 1.5 1.5 52 　 114 122 8000 　 6000 7500 1.08 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU256M ,D=280   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU256M 280 500 80 5 5 340 　 1140 1680 1300 　 1100 1400 70.7 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU252M ,D=260   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU252M 260 480 80 5 5 320 　 1100 1580 1500 　 1200 1500 67.1 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU248M ,D=240   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU248M 240 440 72 4 4 295 　 935 1340 1600 0 1300 1600 50.4 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU240M ,D=200   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU240M 200 360 58 4 4 243 　 765 1060 1900 3200 1700 2000 26.9 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU238M ,D=190   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU238M 190 340 55 4 4 230 　 695 955 2000 3400 1800 2200 22.5 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU236M ,D=180   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU236M 180 320 52 4 4 217 　 625 850 2200 3600 1900 2200 18.6 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU234M ,D=170   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU234M 170 310 52 4 4 207 　 605 800 2400 3800 2000 2400 17.9 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU232M ,D=160   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU232M 160 290 48 3 3 195 　 500 665 2600 4000 2200 2600 14.5 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU230W ,D=150   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU230W 150 270 45 3 3 182 　 450 595 2800 4300 2200 2800 11.6 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2307W ,D=35   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2307W 35 80 31 1.5 1.1 46.2 　 93 101 9000 　 6700 8500 0.809 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2306W ,D=30   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2306W 30 72 27 1.1 1.1 40.5 　 74.5 77.5 9500 　 8000 9500 0.586 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2305W ,D=25   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2305W 25 62 24 1.1 1.1 34 　 57 56 11000 　 9000 11000 0.384 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2248M ,D=240   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2248M 240 440 120 4 4 295 　 1440 2320 1500 　 1200 1500 84.9 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2244M ,D=220   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2244M 220 400 108 4 4 270 　 1140 1810 1700 　 1300 1600 61.8 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2240M ,D=200   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2240M 200 360 98 4 4 241 　 1220 1870 1800 　 1500 1800 45.4 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2238M ,D=190   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2238M 190 340 92 4 4 228 　 1100 1670 1900 　 1600 2000 37.7 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2236M ,D=180   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2236M 180 320 86 4 4 215 　 1010 1510 2000 　 1700 2000 30.9 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2234M ,D=170   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2234M 170 310 86 4 4 205 　 925 1330 2200 　 1800 2200 29.4 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2232M ,D=160   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2232M 160 290 80 3 3 193 　 810 1190 2400 　 1900 2400 24.3 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2230M ,D=150   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2230M 150 270 73 3 3 182 　 635 930 2800 　 2000 2600 19 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2228W ,D=140   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2228W 140 250 68 3 3 169 　 550 790 3200 　 2200 2800 15 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2226W ,D=130   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2226W 130 230 64 3 3 153.5 　 530 735 3400 　 2400 3000 11.7 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2224W ,D=120   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2224W 120 215 58 2.1 2.1 143.5 　 450 620 3600 　 2600 3200 9.36 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2222W ,D=110   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2222W 110 200 53 2.1 2.1 132.5 　 385 515 4000 　 2800 3400 7.52 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2220W ,D=100   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2220W 100 180 46 2.1 2.1 119 　 335 445 4300 　 3200 3800 5.23 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2219W ,D=95   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2219W 95 170 43 2.1 2.1 112.5 　 286 370 4500 　 3400 4000 4.3 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2218W ,D=90   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2218W 90 160 40 2 2 107 　 242 315 4800 　 3600 4300 3.5 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less