BEARING / FA

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU236M ,D=180   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU236M 180 320 52 4 4 217 　 625 850 2200 3600 1900 2200 18.6 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU234M ,D=170   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU234M 170 310 52 4 4 207 　 605 800 2400 3800 2000 2400 17.9 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU232M ,D=160   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU232M 160 290 48 3 3 195 　 500 665 2600 4000 2200 2600 14.5 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU230W ,D=150   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU230W 150 270 45 3 3 182 　 450 595 2800 4300 2200 2800 11.6 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2307W ,D=35   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2307W 35 80 31 1.5 1.1 46.2 　 93 101 9000 　 6700 8500 0.809 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2306W ,D=30   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2306W 30 72 27 1.1 1.1 40.5 　 74.5 77.5 9500 　 8000 9500 0.586 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2305W ,D=25   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2305W 25 62 24 1.1 1.1 34 　 57 56 11000 　 9000 11000 0.384 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2248M ,D=240   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2248M 240 440 120 4 4 295 　 1440 2320 1500 　 1200 1500 84.9 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2244M ,D=220   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2244M 220 400 108 4 4 270 　 1140 1810 1700 　 1300 1600 61.8 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2240M ,D=200   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2240M 200 360 98 4 4 241 　 1220 1870 1800 　 1500 1800 45.4 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2238M ,D=190   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2238M 190 340 92 4 4 228 　 1100 1670 1900 　 1600 2000 37.7 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2236M ,D=180   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2236M 180 320 86 4 4 215 　 1010 1510 2000 　 1700 2000 30.9 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2234M ,D=170   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2234M 170 310 86 4 4 205 　 925 1330 2200 　 1800 2200 29.4 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2232M ,D=160   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2232M 160 290 80 3 3 193 　 810 1190 2400 　 1900 2400 24.3 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2230M ,D=150   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2230M 150 270 73 3 3 182 　 635 930 2800 　 2000 2600 19 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2228W ,D=140   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2228W 140 250 68 3 3 169 　 550 790 3200 　 2200 2800 15 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2226W ,D=130   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2226W 130 230 64 3 3 153.5 　 530 735 3400 　 2400 3000 11.7 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2224W ,D=120   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2224W 120 215 58 2.1 2.1 143.5 　 450 620 3600 　 2600 3200 9.36 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2222W ,D=110   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2222W 110 200 53 2.1 2.1 132.5 　 385 515 4000 　 2800 3400 7.52 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2220W ,D=100   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2220W 100 180 46 2.1 2.1 119 　 335 445 4300 　 3200 3800 5.23 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2219W ,D=95   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2219W 95 170 43 2.1 2.1 112.5 　 286 370 4500 　 3400 4000 4.3 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2218W ,D=90   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2218W 90 160 40 2 2 107 　 242 315 4800 　 3600 4300 3.5 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2217W ,D=85   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2217W 85 150 36 2 2 100.5 　 217 279 4800 　 3800 4500 2.75 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2216W ,D=80   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2216W 80 140 33 2 2 95.3 　 186 243 5000 　 4000 5000 2.18 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2215W ,D=75   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2215W 75 130 31 1.5 1.5 88.5 　 162 207 5300 　 4300 5300 1.76 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2214W ,D=70   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2214W 70 125 31 1.5 1.5 83.5 　 156 194 5600 　 4500 5600 1.67 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2213W ,D=65   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2213W 65 120 31 1.5 1.5 78.5 　 149 181 6000 　 4800 6000 1.58 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2212W ,D=60   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2212W 60 110 28 1.5 1.5 72 　 131 157 6300 　 5300 6300 1.19 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2211W ,D=55   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2211W 55 100 25 1.5 1.1 66 　 101 122 6700 　 5600 7100 0.881 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2210W ,D=50   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2210W 50 90 23 1.1 1.1 59.5 　 83.5 97 7500 　 6300 8000 0.642 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2209W ,D=45   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2209W 45 85 23 1.1 1.1 54.5 　 76 84.5 8500 　 6700 8500 0.595 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2208W ,D=40   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2208W 40 80 23 1.1 1.1 49.5 　 72.5 77.5 9000 　 7500 9000 0.548 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2207W ,D=35   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2207W 35 72 23 1.1 0.6 44 　 61.5 65.5 11000 　 8500 10000 0.458 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2206W ,D=30   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2206W 30 62 20 1 0.6 37.5 　 49 50 12000 　 9500 12000 0.292 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2205W ,D=25   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2205W 25 52 18 1 0.6 31.5 　 35 34.5 14000 　 12000 14000 0.184 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU2204W ,D=20   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU2204W 20 47 18 1 0.6 27 　 20.7 18.4 19000 　 11000 13000 0.144 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU228W ,D=140   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU228W 140 250 42 3 3 169 　 395 515 3200 4500 2400 3000 9.21 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU224W ,D=120   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU224W 120 215 40 2.1 2.1 143.5 　 335 420 3600 5300 3000 3400 6.39 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU222W ,D=110   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU222W 110 200 38 2.1 2.1 132.5 　 293 365 4000 5600 3200 3800 5.33 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU221W ,D=105   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU221W 105 190 36 2.1 2.1 125 　 262 310 4300 6000 3400 4000 4.48 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU220W ,D=100   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU220W 100 180 34 2.1 2.1 119 　 249 305 4300 6300 3600 4300 3.81 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU219W ,D=95   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU219W 95 170 32 2.1 2.1 112.5 　 220 265 4300 6700 3800 4500 3.16 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU218W ,D=90   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU218W 90 160 30 2 2 107 　 182 217 4800 7100 4000 4800 2.59 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU217W ,D=85   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU217W 85 150 28 2 2 100.5 　 167 199 4800 7500 4300 5000 2.09 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU216W ,D=80   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU216W 80 140 26 2 2 95.3 　 139 167 5000 8000 4500 5300 1.69 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU215W ,D=75   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU215W 75 130 25 1.5 1.5 88.5 　 130 156 5300 8500 4800 6000 1.41 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU214W ,D=70   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU214W 70 125 24 1.5 1.5 83.5 　 119 137 5600 9000 5000 6300 1.28 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row  NU-Type, NU213W ,D=65   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil NU213W 65 120 23 1.5 1.5 78.5 　 108 119 6000 7100 4800 5600 1.05 DESIGN, TYPES, AND FEATURES   Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less