SP AIR

SP AIR air drill 10 mm (with forward / reverse rotation mechanism) SP-1525 Features It is a mini size that is much lighter than an electric drill with the same performance. The compact design weighs about half the weight of an electric drill. Comes with a silencer. Use For general drilling work. Product specifications Specifications / standards Operating air pressure: 0.62MPa Chuck capacity (mm): 10 No-load rotation speed (min (-1st power)): 2200 Air consumption ((M3) / min): 0.4 Drilling capacity (mm): 10 Overall length (mm): 195 Hose mounting port: NPT1 / 4 Exhaust: Rear No-load rotation speed (rpm): 2200

Read more less

SP AIR A narrow Reversible Angle Drill 10mm SP-1514AH Features A narrow angle drill with a width of 78.6 mm including the drill chuck. The drill chuck can be easily replaced. For drilling in narrow spaces. specification Chuck capacity (mm): 10 No-load rotation speed (min ^ -1): 1700 Air consumption (m3 / min): 0.4 Drilling capacity (mm): 10 Overall length (mm): 202 Hose mounting port: NPT1 / 4 Exhaust: Rear Operating air pressure: 0.62MPa Country of origin: Japan

Read more less

SP AIR Air drill 10mm (with forward / reverse rotation mechanism) SP1510AH Features Angle head type ideal for narrow spaces. Mini size that is much lighter than an electric drill with the same performance. Lever action for easy centering. Planetary gear type. Since it is a rear exhaust, it does not interfere with work. In addition to general drilling work up to 10 mm, it has a reverse rotation function, so it is suitable for drilling holes in wood, etc., and screws can be attached and detached with a screwdriver bit. specification No-load rotation speed (rpm): 1800 Overall length (mm): 208 Hole drilling ability (mm): 10 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.19

Read more less

SP AIR 6.35mm Impact Driver SP8102B Features Double hammer mechanism enables smooth tightening with high torque 360 ° rotation without twisting of air hose, swivel type air inlet Built-in air regulator For small diameter screw tightening work for automobile sheet metal and general maintenance work specification No-load rotation speed (rpm): 11500 Hose intake: NPT1 / 4 Overall length (mm): 145 Working air pressure (MPa): 0.62 Bit insertion angle (mm): 6.35 Screw capacity (mm): 6-8 Practical torque range (Nm): 7-70 Hose connection (NPT): 1/4 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 Mass (kg): 1.0 Screw capacity (mm): 6-8 Practical torque range (Nm): 7-70 Mass (kg): 1.0 Recommended hose inner diameter (mm): 6.35

Read more less

SP AIR 3/8”Dr Impact wrench 9.5 mm square SP-1135B Product features [Product description] ● Left and right switching push switch type.  ● Stepless throttle. [Use] ● For general bolt work such as bench work, engine and transmission gear repair. Product specifications Maker S. P. Air brand SP AIR Tightening torque (N ・ m) 7-90 Size 160 x 138 x 52 mm Other Knurling type, stepless dial type regulator No-load rotation speed (min-1) 12000 Normal bolt diameter (mm) Ten Hose fitting 1/4 "NPT Country of origin Japan SQ (mm) 9.5 mass 1300g  

Read more less

SP AIR 3/8”Dr Square Butterfly Impact Wrench, SP-1138(3/8SQ) Features It is a butterfly type throttle lever. Use Engine repairs with bolt diameters up to 10 mm, sheet metal work, air conditioner attachment / detachment work, etc. Product specifications Specifications / standards Built-in air regulator With swivel inlet for easy work Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 90 Air consumption ((M3) / min): 0.3 Hose mounting port: NPT1 / 4 Overall length (mm): 180 Hammer type: One hammer Operating air pressure (MPa): 0.62 Tightening torque (N ・ m): 7 to 90

Read more less

SP AIR 1/2”Dr Impact Ratchet Wrench 12.7mm Square,SP-7731(1/2SQ) Feature Ratchet wrench with built-in impact mechanism that exceeds the common sense of ratchet wrench, high power with little recoil. It rotates twice as fast as a normal ratchet and has excellent workability. Built-in regulator. For work in hard-to-reach places such as the engine room of a car. specification Capacity Bolt diameter (mm): 10 Socket insertion angle (mm): 12.7 Maximum tightening torque (N ・ m): 90 No-load rotation speed (min ^ -1): 450 Air consumption (m3 / min): 0.7 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 295 No-load rotation speed (rpm): 450 Operating air pressure: 0.62MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

SP AIR 1/2”Dr Ratchet Wrench, SP-1133SX-2(1/2SQ) SPECIFICATIONS: Hand Torque: 124ft/lbs Length: 254mm Capacity: 16mm Air consumption: 525L/min Max FEATURES: Ideal for engine repairs, tune-ups and radiator work Induction hardened ratchet head to increase the life of your tool Heavy duty metal body Ergonomic design reduces fatigue Lever handle for throttle control Forward/reverse

Read more less

SP AIR 3/8”Dr Impact Ratchet Wrench - Mini, SP-1765(3/8SQ) SPECIFICATIONS: Hand Torque: 50Nm Length: 178mm Capacity: 10mm Air consumption: 396L/min Max FEATURES: 3x Faster than normal mini ratchets Ideal for work around engines where room is limited Induction hardened ratchet head to increase the life of your tool Single dog hammer mechanism Heavy duty metal body Ergonomic design reduces fatigue Lever handle for throttle control Forward/reverse

Read more less

SP AIR 9.5 mm square air ratchet wrench with SP silencer, SP-1762N(3/8SQ) Features The ball-type anvil makes it easy to attach and detach the socket. The ratchet head is hardened and has excellent durability. Comes with a red cover to protect the ratchet head. Use For detailed work such as interior / exterior work of the car body, engine repair of small cars and motorcycles, bench work and installation work of headlights, air conditioners, meters. Product specifications Specifications / standards Operating air pressure: 0.62MPa Recommended hose inner diameter: 6.35 mm Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 20 No-load rotation speed (min (-1st power)): 200 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 185 Tightening torque (N ・ m): 20 Capacity bolt diameter

Read more less