MITUTOYO
MITUTOYO MITUTOYO Digital Outside Micrometers - Series 193-111
MITUTOYO Digital Outside Micrometers - Series 193-111 Series 193 FEATURES Mechanical digit counter with 0.01mm or .001" reading for quick and error-free reading With a standard bar except for 0-25mm / 0 -1” model. Technical DataAccuracy: Refer to the list of specifications.Counter reading: 0.01mm or .001"Graduation: 0.01mm, 0.001mm, .001" or .0001"Flatness: 0.6ìm / .000024”Parallelism: (2+R/100)µm, R=max. range (mm)[.00008” + .00004” (L/4)]”, L= max. range (inch)Measuring faces: Carbide tipped Order No Range Accuracy Remarks 193-111 0-25mm ±2µm with ratchet stop
$152.27
MITUTOYO MITUTOYO ABSOLUTE Dial Depth Gage Series 7200
MITUTOYO ABSOLUTE Dial Depth Gage Series 7200 FEATURES Designed with a back plunger type dial indicator for upward facing readings. (7231, 7237T, 7238T) Technical DataDial reading: 0.01mm or .001”Flatness of base face: 5µm or 2µmContact point: Carbide-tipped ball point(needle point:7210, 7222)Measuring force: 1.4N (2.5N: 7213, 7214, 7217, 7218) Order No Range Graduation Stroke Accuracy Extension Rods Base WxThickness Flatness 7210 0-10mm 0.01mm 10mm 0.015mm - 40x16mm 5µm 7211 0-200mm 0.01mm 10mm 0.015mm 5pcs.(10,20,30,30,100mm) 63.5x16mm 5µm 7212 0-200mm 0.01mm 10mm 0.015mm 5pcs.(10,20,30,30,100mm) 101.6x16mm 5µm 7220 0-200mm 0.01mm 10mm 0.015mm 5pcs.(10,20,30,30,100mm) 100x18mm 5µm 7221 0-200mm 0.01mm 10mm 0.015mm 5pcs.(10,20,30,30,100mm) 150x18mm 5µm 7231 0-200mm 0.01mm 5mm 0.015mm 5pcs.(10,20,30,30,100mm) 63.5x16mm 5µm
$199.38
MITUTOYO MITUTOYO Depth Micrometer Series 129-Interchangeable Rod Type
MITUTOYO Depth Micrometer Series 129-Interchangeable Rod Type Series 129 FEATURES • ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range.• The rod length can be adjusted in 1” or 25mm increments.• With ratchet stop for constant force.• With measuring rod clamp.• With SPC output (Series 329).• Supplied in fitted plastic case. Order Number Range Base Size Rod Qty 129-109 0-50mm 63.5x16mm 2 129-111 0-100mm 63.5x16mm 4 129-112 0-150mm 63.5x16mm 6 129-115 0-100mm 101.6x16mm 4 129-116 0-150mm 101.6x16mm 6
$154.46
MITUTOYO MITUTOYO Extension Bases Optional Accessory for Depth Gage
MITUTOYO Extension Bases Optional Accessory for Depth Gage FEATURES Attached to the base (reference face) plate of a depth gage to extend its span. These extension base cannot be attached to 0-600mm, 0-1000mm, 0-24” and 0-40” range models. Order No Size Dimen a,b / n 900370 180mm 70,55mm /2 900371 260mm 35,60mm /5 900372 320mm 70,55mm /4
$44.47
MITUTOYO MITUTOYO Vernier Depth Gage - Series 527 with fine adjustment
MITUTOYO Vernier Depth Gage - Series 527 with fine adjustment Series 527 FEATURES Made of hardened stainless steel. Base and measuring faces are hardened and micro-lapped. Optional wider extension base are available.(up to 450mm range models Technical DataGraduation:0.05mm,0.02mm or .001in Order No. Range Vernier Reading Accuracy Mass Remarks 527-101 0-150mm 0.02 mm 0.03mm 280g with fine adjustment 527-102 0-200mm 0.02 0.03mm 300g with fine adjustment 527-103 0-300mm 0.02 0.04mm 350g with fine adjustment 527-104 0-600mm 0.02 0.05mm 1511g with fine adjustment
$154.46
MITUTOYO MITUTOYO Vernier Depth Gage - Series 527
MITUTOYO Vernier Depth Gage - Series 527 Series 527 FEATURES Made of hardened stainless steel. Base and measuring faces are hardened and micro-lapped. Optional wider extension base are available.(up to 450mm range models Technical DataGraduation:0.05mm,0.02mm or .001in Order No. Range Vernier Reading Accuracy Mass 527-201 0-150mm 0.05 mm 0.05mm 240g 527-202 0-200mm 0.05 mm 0.05mm 260g 527-203 0-300mm 0.05 0.08mm 300g 527-204 0-600mm 0.05 0.10mm 1511g 527-121 0-150mm 0.02 mm 0.03mm 215g 527-122 0-200mm 0.02 mm 0.03mm 230g 527-123 0-300mm 0.02 0.04mm 265g
$131.46
MITUTOYO MITUTOYO Dial Calipers - Series 505
MITUTOYO Dial Calipers - Series 505 Series 505 FEATURES New designed dial movement for ultra smooth sliding and high shock protection. Can measure OD, ID, depth, and steps. Lock screw for dial bezel and for holding the slding jaw position . Models available with carbide-tipped OD and ID jaws. Supplied in fitted plastic case. Order No Range Accuracy Graduation Range Per Rev 505-732 0-150mm 0.02mm 0.01mm 1mm 505-733 0-200mm 0.03mm 0.01mm 1mm 505-730 0-150mm 0.03mm 0.02mm 2mm 505-731 0-200mm 0.03mm 0.02mm 2mm 505-745 0-300mm 0.04mm 0.02mm 2mm
$127.07
MITUTOYO MITUTOYO Vernier Caliper Series 160-with Nib Style Jaws and Fine Adjustment
MITUTOYO Vernier Caliper Series 160-with Nib Style Jaws and Fine Adjustment Series 160 FEATURES The jaws have round measuring faces for accurate ID measurement. With fine adjustment carriage to feed the slider finely. (without 160-130~134) Inside and outside measurements can be directly read from the upper and lower slider graduations, respectively. Supplied with vinyl holster in fitted carton. Except 300mm / 12”,450mm/18” and 600mm/24” are fittedcarton only. Over 600mm/24” supplied in wooden case. Order No Range Accuracy Graduation Lower Scale Upper Scale Mass 160-101 0(20)-600mm 0.05mm 0.02 mm 0.02 mm 2600g 160-104 0(20)-1000mm 0.07mm 0.02 mm 0.02 mm 3500g 160-110 0(20)-1500mm 0.09mm 0.02 mm 0.02 mm 4850g 160-113 0(20)-2000mm 0.12mm 0.02 mm 0.02 mm 10200g
$576.22
MITUTOYO MITUTOYO Long Jaw Vernier Caliper Series 534
MITUTOYO Long Jaw Vernier Caliper Series 534 Series 534 FEATURES Long jaws for measuring hard-to-reach features. Fine adjustment for more accurate measurement(except 534-109 and 534-110) Supplied in fitted wooden case. Order No Range Accuracy Graduation Lower Scale Upper Scale Mass 534-109 0(10)-300mm 0.07mm 0.05 0.05mm 400g 534-110 0(20)-500mm 0.13mm 0.05 0.05mm 1,400g 534-113 0(10)-300mm 0.04mm 0.02 0.02mm 460g 534-114 0(20)-500mm 0.06mm 0.02 0.02mm 1,500g 534-115 0(20)-750mm 0.08mm 0.02 0.02mm 2,900g 534-116 0(20)-1000mm 0.1mm 0.02 0.02mm 3,500g
$460.10
MITUTOYO MITUTOYO Vernier Calipers Series 530 - Standard Model
Vernier Calipers Series 530 - Standard Model Series 530 FEATURES Measures OD (outside diameter), ID (inside diameter), depth, and steps. The small vernier face angle (14°) provides easy reading. Dual reading scales on vernier. (metric/inch and inch models only) Lock screw for holding thesliding jaw position. Carbide-tipped jaw type calipers are also available. Supplied with vinyl holster in fitted carton. Except 600mm / 24” models are carton only. 1000mm / 40” supplied in wooden case. Technical DataGraduation: 0.05mm, 0.05mm (1/128”) or .001” (1/128”)High accuracy type: 0.02mm or 0.02mm (.001”) Order No Range Accuracy Vernier Graduation Remarks Lower Scale 530-100 0-100mm 0.05mm 0.05mm 530-101 0-150mm 0.05mm 0.05mm - 530-108 0-200mm 0.05mm 0.05mm - 530-109 0-300mm 0.08mm 0.05mm - 530-501 0-600mm 0.1mm 0.05mm - 530-502 0-1000mm 0.15mm 0.05mm - 530-122 0-150mm 0.03mm 0.02mm High accuracy model 530-123 0-200mm 0.03mm 0.02mm High accuracy model 530-124 0-300mm 0.04mm 0.02mm High Accuracy Model :±0.04
$49.32
