GENIUS TOOLS 11 Piece 1/2″ Dr. Metric Hex Head Driver Set TH-411M
1/2" Dr. Hex Head Driver 60mmL
|5mm Hex Head Driver
|6mm Hex Head Driver
|7mm Hex Head Driver
|8mm Hex Head Driver
|9mm Hex Head Driver
|10mm Hex Head Driver
|12mm Hex Head Driver
|14mm Hex Head Driver
|16mm Hex Head Driver
|17mm Hex Head Driver
|19mm Hex Head Driver
• Always wear safety goggles and protective equipment while using any impact tool.
• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.
• Always use retaining ring and pin to hold socket on impact tool.
• Do not use damaged or worn sockets or accessories.
• Do not run the impact tool while placing the socket over the nut.
• Do not hold the socket or accessory while the tool is in operation.
• Do not continue to drive with an impact socket once the fastener is tight.
• Do not use hand sockets or accessories on impact tools.