Autonics photoelectric micro sensor
Autonics Autonics photoelectric micro sensor, Through-beam type, BS5-L1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.36
Autonics Autonics photoelectric micro sensor ,Through-beam type, BS5-T2M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.10
Autonics Autonics photoelectric micro sensor ,Through-beam type, BS5-Y1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.36
Autonics Autonics photoelectric micro sensor, Through-beam type, BS5-T1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.36
