Drills
KANZAWA KANZAWA K-801-2 Drill Guide With 13 mm Chuck (Upgrade K-802-2)
KANZAWA K-801-2 Drill Guide With 13 mm Chuck Tough is different from the average body! Aluminum die cast drill guide with 13 mm chuck. Vertical 45-degree inclined holes can be drilled accurately. A central V-shaped block can be used to drill holes in the center of pipes and bars. It can also be used for center drilling of lumber if a guide rod is used. By setting the position of the stopper ring, you can adjust the depth of the hole. 【specification】 Main material Aluminum die cast steel full length 350 mm stroke 220 mm weight Approximately 1.65 kgs Shank shape Three-sided shaft 10 mm Chuck capacity 13 mm accessories Chuck key
$162.24
KANZAWA KANZAWA K-802 Drill Guide With 10 mm Chuck (Upgrade K-801)
KANZAWA K-801 Drill Guide With 10 mm Chuck Tough is different from the average body! Aluminum die cast drill guide with 10 mm chuck. Vertical 45-degree inclined holes can be drilled accurately. A central V-shaped block can be used to drill holes in the center of pipes and bars. It can also be used for center drilling of lumber if a guide rod is used. By setting the position of the stopper ring, you can adjust the depth of the hole 【specification】 Main material Aluminum die cast steel full length 260 mm stroke 130 mm weight Approximately 1.4 kgs Shank shape Three-sided shaft 10 mm Chuck capacity 10 mm accessories Chuck key
$125.59
KANZAWA KANZAWA K-836 L-shaped screwdriver L. PRO-75
KANZAWA K-836 L-shaped screwdriver L. PRO-75 Since it was first released in the world in 1995, it is an L-shaped driver for electric tools that has been used in the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be very easy. Professional specification that course thread up to 75mm can be driven easily. Elastomeric grips make it hard to slip and work without handles. Normal and reverse rotation possible. 【specification】 Head depth 68mm (when attached 45mm bit attached) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 45 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V
$47.86
KANZAWA KANZAWA K-834 L-shaped drill L. PRO-10
KANZAWA K-834 L-shaped drill L. PRO-10 This is an L-shaped drill for electric drills used worldwide since its first release in the world in 1995 . Ideal for drilling holes that are difficult to reach with electrical drills, such as corners and walls. Normal and reverse rotation possible. 【specification】 Chuck capacity 10 mm Handle attachment point 3 places (body back and left and right side) accessories Chuck key handle Compatible power tool Electric drill 10 mm or more
$59.93
KANZAWA KANZAWA K-880 L-shaped screwdriver L.PRO-75F
KANZAWA K-880 L-shaped screwdriver L.PRO-75F Since it was first released in the world in 1995, it is a motorized L-shaped driver that has been favored all over the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be much easier. The head angle can be freely changed within the range of 180 degrees. Professional specification that course thread up to 75mm can be driven easily. Normal and reverse rotation possible. 【specification】 Head depth 70mm (with attached 45mm bit) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 45 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V
$69.46
KANZAWA KANZAWA K-839 L-shaped driver L. PRO-75S
KANZAWA K-839 L-shaped driver L. PRO-75S Since it was first released in the world in 1995, it is an L-shaped driver for electric tools that has been used in the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be very easy. Professional specification that course thread up to 75mm can be driven easily. Compact type with 50 mm head depth! Normal and reverse rotation possible. 【specification】 Head depth 50mm (when attached 25mm bit attached) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 25 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V
$50.82
KANZAWA KANZAWA K-884 L-shaped screwdriver L. PRO-70
KANZAWA K-884 L-shaped screwdriver L. PRO-70 Since it was first released in the world in 1995, it is an L-shaped driver for electric tools that has been used in the world. Very convenient for screwing and removing in narrow places such as corners. Working in places, difficult angles and unreasonable positions where impact drivers are difficult to enter will be very easy. Professional specification that course thread up to 75mm can be driven easily. Elastomeric grips make it hard to slip and work without handles. Normal and reverse rotation possible. 【specification】 Head depth 58mm (when attached 35mm bit attached) Driveable screw Up to 75 mm Chuck type Easy chuck Handle attachment point 2 places (main body left and right side) accessories Bit + No. 2 x 35 mm Double-headed One handle one Compatible power tool Driver drill / impact driver 18V
$46.38
