Products

GENIUS TOOLS 1/2" Dr. Triple Square Bit Sockets -110mmL SPECIFICATIONS Product Code. Size Length Weight mm G 201-0931 M5 110 75 201-0940 M6 110 80 201-0959 M8 110 90 201-0968 M10 110 130 201-0977 M12 110 170 201-0986 M14 110 210

Read more less

GENIUS TOOLS 1/2" Dr. Triple Square Bit Sockets -150mmL SPECIFICATIONS Product Code. Size Length Weight mm G 201-0995 M5 150 85 201-1000 M6 150 90

Read more less

  GENIUS TOOLS 1/2" Dr. Wobble Extension Bars SPECIFICATIONS Product Code. Length Weight mm G 200-6682 50 85 200-6691 75 115 200-6707 125 175 200-6716 200 270 200-6725 250 330 200-6734 375 485 200-6743 600 765     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

   GENIUS TOOLS 1/2″ Dr. Hex Shank Bit Holder SPECIFICATIONS Product Code. Drive Hex Length Weight Shank mm G 201-5167 1/2" 1/4" 41 60 201-5176 1/2" 5/16" 41 65     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/2″ Dr. L-Handle 260mmL  SPECIFICATIONS Product Code. Length Weight mm G 200-6901 160 160     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/2″ Dr. Ratchet 250mmL  SPECIFICATIONS Product Code Length Weight mm G 200-7052 250 570   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/2″ Dr. Sliding T-Handle 320mmL  SPECIFICATIONS Product Code. Length Weight mm G 200-6859 320 520     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/2″ Dr. Speed Handle 490 mmL  SPECIFICATIONS Product Code. Length Weight mm G 200-6947 490 850     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. 6 pt. Metric Deep Hand Sockets SPECIFICATIONS   Product Code. A D1 D2 Length Weight mm mm mm mm G 201-1453 4 6.7 12 50 18 201-1471 4.5 7.3 12 50 18 200-3737 5 8 12 50 18 201-1480 5.5 8.6 12 50 18 200-3746 6 9.2 12 50 20 200-3755 7 10.8 12 50 24 200-3764 8 12 11.5 50 24 200-3773 9 13.2 12 50 26 200-3782 10 14.7 12.5 50 34 200-3791 11 16 13 50 38 200-3807 12 17 13.5 50 38 200-3816 13 18 14 50 45 200-8264 14 19.7 14.5 50 54   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes sudden breakage and can result in bodily injury

Read more less

   GENIUS TOOLS 1/4" Dr. 6 pt. Metric Hand Sockets SPECIFICATIONS Product Code. A D1 D2 Length Weight mm mm mm mm G 201-1277 3 5.5 12 25 10 201-1286 4 6.7 12 25 10 201-1295 4.5 7.3 12 25 10 200-3825 5 8 12 25 10 200-3834 5.5 8.6 12 25 10 200-3843 6 9.2 12 25 10 200-3852 7 10.8 12 25 12 200-3861 8 12 12 25 12 200-3870 9 13 13 25 14 200-3889 10 14 14 25 16 200-8228 11 16 16 25 22 200-8237 12 17 17 25 24 200-8246 13 18 18 25 28 200-8255 14 20 20 25 38   Safety Information • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. 6 pt. Metric Impact Sockets Cr-V SPECIFICATIONS Product Code. A D1 D2 Length Weight mm mm mm mm G 201-5440 3 6.1 12 25 9 201-5459 4 7.3 12 25 9 201-5468 4.5 7.9 12 25 10 201-5477 5 8.5 12 25 10 201-5486 5.5 9.1 12 25 10 201-5495 6 9.7 12 25 11 201-5501 7 11 12 25 11 201-5510 8 12 12 25 11 201-5529 9 13 13 25 13 201-5538 10 14 14 25 15 201-5547 11 16 16 25 20 201-5556 12 17 17 25 25 201-5565 13 18 18 25 30 201-5574 14 20 20 25 35   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 1/4" Dr. 72 Teeth Flex Head Ratchet - Chrome Handle  SPECIFICATIONS Product Code. Length Weight mm G 200-7159 170 165   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. 72 Teeth Ratchet - Chrome Handle  SPECIFICATIONS Product Code Length Weight mm G 200-7089 130 130   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. 72 Teeth Rotor Ratchet - Chrome Handle  SPECIFICATIONS Product Code. Length Weight mm G 200-7122 140 120   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. Adapters 2EA SPECIFICATIONS Product Code. Female Male Length Weight Drive Drive mm G 200-6114 1/4" 3/8" 25 30   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. Flexible Extensions  SPECIFICATIONS   Product Code. Hex Female Length Weight Shank Drive mm G 200-7308 1/4" 1/4" 150 65

Read more less

GENIUS TOOLS 1/4" Dr. Folding Socket Drivers - Plastic Handle  SPECIFICATIONS Product Code. Length Weight mm G 200-7423 170 90   SAFETY INFORMATION   • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. Hinge Handle - Knurled Handle  SPECIFICATIONS Product Code. Length Weight mm G 200-9476 150 110   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/4" Dr. Sliding T-Handles 150mmL  SPECIFICATIONS Product Code. Length Weight mm G 200-9421 150 66     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/4" Dr. Wobble Extension Bars SPECIFICATIONS Product Code. Length Weight mm G 201-4210 50 23 201-4229 100 43 201-4238 150 63     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 10 Piece 1/2″ Dr. Metric Deep Hand Socket Set GS-410DM   SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7760 GS-410DM 1/2" Dr. 6 pt. Deep Hand Socket 10mm Deep Hand Socket 2200 11mm Deep Hand Socket 12mm Deep Hand Socket 13mm Deep Hand Socket 14mm Deep Hand Socket 17mm Deep Hand Socket 19mm Deep Hand Socket 21mm Deep Hand Socket 22mm Deep Hand Socket 24mm Deep Hand Socket Metal Box   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 10 Piece 1/2″ Dr. Metric Deep Impact Socket Set Cr-Mo CM-008  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7955 CM-008 1/2" Dr. 6 pt. Deep Impact Socket 11mm Deep Impact Socket 2600 12mm Deep Impact Socket 13mm Deep Impact Socket 14mm Deep Impact Socket 16mm Deep Impact Socket 17mm Deep Impact Socket 19mm Deep Impact Socket 21mm Deep Impact Socket 22mm Deep Impact Socket 24mm Deep Impact Socket Metal Box   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 10 Piece 1/2″ Dr. Metric Hand Socket Set GS-410RM  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7797 GS-410RM 1/2" Dr. 6 pt. Hand Socket 10mm Hand Socket 1000 11mm Hand Socket 12mm Hand Socket 13mm Hand Socket 14mm Hand Socket 17mm Hand Socket 19mm Hand Socket 21mm Hand Socket 22mm Hand Socket 24mm Hand Socket Metal Box   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 10 Piece 1/2″ Dr. Tamperproof Star Bit Socket Set BS-410TA  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-9546 BS-410TA 1/2" Dr. Tamperproof Star Bit Socket 55mmL T-20 Tamperproof Star Bit Socket 880 T-25 Tamperproof Star Bit Socket T-27 Tamperproof Star Bit Socket T-30 Tamperproof Star Bit Socket T-40 Tamperproof Star Bit Socket T-45 Tamperproof Star Bit Socket T-50 Tamperproof Star Bit Socket T-55 Tamperproof Star Bit Socket 1/2" Dr. Tamperproof Star Bit Socket 60mmL T-60 Tamperproof Star Bit Socket T-70 Tamperproof Star Bit Socket Socket Holder

Read more less

GENIUS TOOLS 10 Piece 1/2″ Dr. Tamperproof Star Bit Socket Set(Long) BS-410TB  SPECIFICATIONS   Product Code. Item No. Description Include Weight (G) 200-9555 BS-410TB 1/2" Dr. Tamperproof Star Bit Socket 110mmL T-20 Tamperproof Star Bit Socket 1220 T-25 Tamperproof Star Bit Socket T-27 Tamperproof Star Bit Socket T-30 Tamperproof Star Bit Socket T-40 Tamperproof Star Bit Socket T-45 Tamperproof Star Bit Socket T-50 Tamperproof Star Bit Socket T-55 Tamperproof Star Bit Socket T-60 Tamperproof Star Bit Socket T-70 Tamperproof Star Bit Socket Socket Holder

Read more less

GENIUS TOOLS 10 Piece 1/2″ Dr. Torque Extension Bar Set TO-410EXT  SPECIFICATIONS Product Code. Item No. Color Description Weight TO-410EXT G 200-7201 10 Piece 1/2″ Dr. Torque Extension Bar Set Green 65 ft.lb. (90Nm) 3250 Black 75 ft.lb. (100Nm) Yellow 80 ft.lb. (110Nm) Red 90 ft.lb. (120Nm) Blue 100 ft.lb. (135Nm) Orange 110 ft.lb. (150Nm) Gray 120 ft.lb. (160Nm) Brown 130 ft.lb. (175Nm) White 140 ft.lb. (190Nm) Aqua 150 ft.lb. (200Nm) Blow Case   ADDITIONAL INFORMATION • [Torque Extension Bars:]• Torque Extensions are designed for 1/2 "Dr. impact wrench rated 380-420 ft.lb .; impact wrench rated 750 ft.lb .; 1 "Dr. impact wrench rated 1,500 ft.lb.• The various drive sizes and torque limits allow you to use any impact socket with a torque extension to match different lug nut sizes found on vehicles• Helps prevent over-torquing of wheel nuts and can minimize wheel distortion.• The unique design allows for the length and diameter of the torque extension shaft to flex with each impact of the impact wrench once the specified torque is reached.• Accurate to within 4%.

Read more less

GENIUS TOOLS 10 Piece 3/8″ Dr. Metric Hex Bit Socket Set (Long) BS-310HML  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7609 BS-310HML 3/8" Dr. Metric Hex Bit Socket 110mmL 3mm Hex Bit Socket 900 4mm Hex Bit Socket 5mm Hex Bit Socket 6mm Hex Bit Socket 7mm Hex Bit Socket 8mm Hex Bit Socket 9mm Hex Bit Socket 10mm Hex Bit Socket 11mm Hex Bit Socket 12mm Hex Bit Socket Socket Holder

Read more less

GENIUS TOOLS 10 Piece 3/8″ Dr. Metric Hex Bit Socket Set BS-310HM  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7593 BS-310HM 3/8" Dr. Metric Hex Bit Socket 50mmL 3mm Hex Bit Socket 635 4mm Hex Bit Socket 5mm Hex Bit Socket 6mm Hex Bit Socket 7mm Hex Bit Socket 8mm Hex Bit Socket 9mm Hex Bit Socket 10mm Hex Bit Socket 11mm Hex Bit Socket 12mm Hex Bit Socket

Read more less

GENIUS TOOLS 10 Piece 3/8″ Dr. Metric Hex Head Driver Set TH-310M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7690 TH-310M 3/8" Dr. Hex Head Driver 52mmL 4mm Hex Head Driver 900 5mm Hex Head Driver 6mm Hex Head Driver 7mm Hex Head Driver 8mm Hex Head Driver 10mm Hex Head Driver 12mm Hex Head Driver 14mm Hex Head Driver 16mm Hex Head Driver 17mm Hex Head Driver Metal Box   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 10 Piece 3/8″ Dr. SAE Hex Head Driver Set TH-310S  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-9908 TH-310S 3/8" Dr. Hex Head Driver 52mmL 5/32" Hex Head Driver 900 3/16" Hex Head Driver 7/32" Hex Head Driver 1/4" Hex Head Driver 5/16" Hex Head Driver 3/8" Hex Head Driver 7/16" Hex Head Driver 1/2" Hex Head Driver 9/16" Hex Head Driver 5/8" Hex Head Driver Metal Box   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 10 Piece 3/8″ Dr. Tamperproof Star Bit Socket Set BS-310TA   SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7575 BS-310TA 3/8" Dr. Tamperproof Star Bit Socket 50mmL T-10 Tamperproof Star Bit Socket 540 T-15 Tamperproof Star Bit Socket T-20 Tamperproof Star Bit Socket T-25 Tamperproof Star Bit Socket T-27 Tamperproof Star Bit Socket T-30 Tamperproof Star Bit Socket T-40 Tamperproof Star Bit Socket T-45 Tamperproof Star Bit Socket T-50 Tamperproof Star Bit Socket T-55 Tamperproof Star Bit Socket Socket Holder  

Read more less

GENIUS TOOLS 10 Piece 3/8″ Dr. Tamperproof Star Bit Socket Set(Long) BS-310TAL   SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7584 BS-310TAL 3/8" Dr. Tamperproof Star Bit Socket 110mmL T-10 Tamperproof Star Bit Socket 730 T-15 Tamperproof Star Bit Socket T-20 Tamperproof Star Bit Socket T-25 Tamperproof Star Bit Socket T-27 Tamperproof Star Bit Socket T-30 Tamperproof Star Bit Socket T-40 Tamperproof Star Bit Socket T-45 Tamperproof Star Bit Socket T-50 Tamperproof Star Bit Socket T-55 Tamperproof Star Bit Socket Socket Holder  

Read more less

GENIUS TOOLS 11 Piece 1/2″ Dr. Metric Hex Head Driver Set TH-411M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 201-2081 TH-411M 1/2" Dr. Hex Head Driver 60mmL 5mm Hex Head Driver 1300 6mm Hex Head Driver 7mm Hex Head Driver 8mm Hex Head Driver 9mm Hex Head Driver 10mm Hex Head Driver 12mm Hex Head Driver 14mm Hex Head Driver 16mm Hex Head Driver 17mm Hex Head Driver 19mm Hex Head Driver Socket Holder   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 11 Piece 1/4″ Dr. Metric Deep Hand Socket Set GD-211M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7733 GD-211M 1/4" Dr. 6 pt. Deep Hand Socket 4mm Deep Hand Socket 400 5mm Deep Hand Socket 5.5mm Deep Hand Socket 6mm Deep Hand Socket 7mm Deep Hand Socket 8mm Deep Hand Socket 9mm Deep Hand Socket 10mm Deep Hand Socket 11mm Deep Hand Socket 12mm Deep Hand Socket 13mm Deep Hand Socket Socket Holder   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 11 Piece 1/4″ Dr. Metric Deep Impact Socket Set Cr-V TD-211M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7937 TD-211M 1/4" Dr. 6 pt. Deep Impact Socket 4mm Deep Impact Socket 400 5mm Deep Impact Socket 5.5mm Deep Impact Socket 6mm Deep Impact Socket 7mm Deep Impact Socket 8mm Deep Impact Socket 9mm Deep Impact Socket 10mm Deep Impact Socket 11mm Deep Impact Socket 12mm Deep Impact Socket 13mm Deep Impact Socket Socket Holder     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 12 Piece 1/2″ Dr. Metric Deep Hand Socket Set GD-412M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7751 GD-412M 1/2" Dr. 6 pt. Deep Hand Socket 8mm Deep Hand Socket 1917 9mm Deep Hand Socket 10mm Deep Hand Socket 11mm Deep Hand Socket 12mm Deep Hand Socket 13mm Deep Hand Socket 14mm Deep Hand Socket 15mm Deep Hand Socket 16mm Deep Hand Socket 17mm Deep Hand Socket 18mm Deep Hand Socket 19mm Deep Hand Socket Socket Holder   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 12 Piece 1/2″ Dr. Metric Hand Socket Set GS-412M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7788 GS-412M 1/2" Dr. 6 pt. Hand Socket 8mm Hand Socket 950 9mm Hand Socket 10mm Hand Socket 11mm Hand Socket 12mm Hand Socket 13mm Hand Socket 14mm Hand Socket 15mm Hand Socket 16mm Hand Socket 17mm Hand Socket 18mm Hand Socket 19mm Hand Socket Socket Holder     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 12 Piece 1/2″ Dr. Metric Hex Head Driver Set TH-412H  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7724 TH-412H 1/2" Dr. Hex Head Driver 60mmL 4mm Hex Head Driver 2830 5mm Hex Head Driver 6mm Hex Head Driver 8mm Hex Head Driver 10mm Hex Head Driver 12mm Hex Head Driver 14mm Hex Head Driver 17mm Hex Head Driver 19mm Hex Head Driver Accessory Extension Bar 75mmL Sliding T-Handle Reversible Ratchet Handle Blow Case   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 12 Piece 3/8″ Dr. Metric Deep Hand Socket Set GD-312M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7742 GD-312M 3/8" Dr. 6 pt. Deep Hand Socket 8mm Deep Hand Socket 1170 9mm Deep Hand Socket 10mm Deep Hand Socket 11mm Deep Hand Socket 12mm Deep Hand Socket 13mm Deep Hand Socket 14mm Deep Hand Socket 15mm Deep Hand Socket 16mm Deep Hand Socket 17mm Deep Hand Socket 18mm Deep Hand Socket 19mm Deep Hand Socket Socket Holder SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 12 Piece 3/8″ Dr. Metric Hand Socket Set GS-312M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7779 GS-312M 3/8" Dr. 6 pt. Hand Socket 8mm Hand Socket 650 9mm Hand Socket 10mm Hand Socket 11mm Hand Socket 12mm Hand Socket 13mm Hand Socket 14mm Hand Socket 15mm Hand Socket 16mm Hand Socket 17mm Hand Socket 18mm Hand Socket 19mm Hand Socket Socket Holder   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 12 Piece 3/8″ Dr. Metric Hex Head Driver Set TH-312M   SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7715 TH-312M 3/8" Dr. Hex Head Driver 52mmL 4mm Hex Head Driver 1780 5mm Hex Head Driver 6mm Hex Head Driver 7mm Hex Head Driver 8mm Hex Head Driver 10mm Hex Head Driver 12mm Hex Head Driver 14mm Hex Head Driver 16mm Hex Head Driver 17mm Hex Head Driver Accessory Sliding T-Handle Reversible Ratchet Handle Metal Box     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 13 Piece 1/2″ Dr. Metric Deep Impact Socket Set Cr-Mo CD-415M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-9500 CD-415M 1/2" Dr. 6 pt. Deep Impact Socket 10mm Deep Impact Socket 4500 11mm Deep Impact Socket 12mm Deep Impact Socket 13mm Deep Impact Socket 14mm Deep Impact Socket 16mm Deep Impact Socket 17mm Deep Impact Socket 19mm Deep Impact Socket 21mm Deep Impact Socket 22mm Deep Impact Socket 24mm Deep Impact Socket 27mm Deep Impact Socket 30mm Deep Impact Socket Metal Box     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 13 Piece 3/8″ Dr. Metric Deep Hand Socket Set GS-313M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-7885 GS-313M 3/8" Dr. 6 pt. Deep Hand Socket 8mm Deep Hand Socket 1980 10mm Deep Hand Socket 11mm Deep Hand Socket 12mm Deep Hand Socket 13mm Deep Hand Socket 14mm Deep Hand Socket 17mm Deep Hand Socket 19mm Deep Hand Socket Accessory 16mm Spark Plug Socket 20.6mm Spark Plug Socket Extension Bar 75mmL Extension Bar 150mmL Reversible Ratchet Handle Metal Box   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 14 Piece 1/4″ Dr. Metric Impact Socket Set Cr-V TF-214M  SPECIFICATIONS   Product Code. Item No. Description Include Weight (G) 200-7928 TF-214M 1/4" Dr. 6 pt. Impact Socket 3mm Impact Socket 310 4mm Impact Socket 4.5mm Impact Socket 5mm Impact Socket 5.5mm Impact Socket 6mm Impact Socket 7mm Impact Socket 8mm Impact Socket 9mm Impact Socket 10mm Impact Socket 11mm Impact Socket 12mm Impact Socket 13mm Impact Socket 14mm Impact Socket Socket Holder   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 14 Piece 1/4″, 3/8″ & 1/2″ Dr. Star Hand Socket Set TX-23414  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 201-4371 TX-23414 1/4" Dr. Star Hand Socket E-4 Star Hand Socket 720 E-5 Star Hand Socket E-6 Star Hand Socket E-7 Star Hand Socket E-8 Star Hand Socket 3/8" Dr. Star Hand Socket E-10 Star Hand Socket E-11 Star Hand Socket E-12 Star Hand Socket E-14 Star Hand Socket E-16 Star Hand Socket 1/2" Dr. Star Hand Socket E-18 Star Hand Socket E-20 Star Hand Socket E-22 Star Hand Socket E-24 Star Hand Socket Socket Holder   SAFETY INFORMATION   • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.  

Read more less

GENIUS TOOLS 14 Piece 3/8″ Dr. Metric Impact Socket Set Cr-Mo IS-314M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-8635 IS-314M 3/8"Dr. 6 pt. Impact Socket 8mm Impact Socket 960 9mm Impact Socket 10mm Impact Socket 11mm Impact Socket 12mm Impact Socket 13mm Impact Socket 14mm Impact Socket 15mm Impact Socket 16mm Impact Socket 17mm Impact Socket 18mm Impact Socket 19mm Impact Socket 21mm Impact Socket Accessory Impact Extension Bar 75mmL Plastic Tray (1/6)     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 15 Piece 1/2″ Dr. Metric Hex Head Driver Set TH-415H   SPECIFICATIONS   Product Code. Model No. Description Include Weight (G) 200-7229 TH-415H Impact Driver 1/2" Dr. Impact Driver 3000 1/2" Dr. Hex Head Driver 60mmL 4mm Hex Head Driver 5mm Hex Head Driver 6mm Hex Head Driver 8mm Hex Head Driver 10mm Hex Head Driver 12mm Hex Head Driver 14mm Hex Head Driver 17mm Hex Head Driver 19mm Hex Head Driver 5/16" Hex Shank Slotted Screwdriver Bit 1.2 x 8.0mm Slotted Screwdriver Bit 1.6 x 10.0mm Slotted Screwdriver Bit 5/16" Hex Shank Philips Screwdriver Bit #2 Philips Screwdriver Bit #3 Philips Screwdriver Bit Accessory 1/2" Dr. 5/16" Hex Bit Holder Metal Box

Read more less

GENIUS TOOLS 15 Piece 1/2″ Dr. Metric Impact Socket Set Cr-Mo IS-415M  SPECIFICATIONS Product Code. Item No. Description Include Weight (G) 200-8644 IS-415M 1/2"Dr. 6 pt. Impact Socket 10mm Impact Socket 1830 11mm Impact Socket 12mm Impact Socket 13mm Impact Socket 14mm Impact Socket 15mm Impact Socket 16mm Impact Socket 17mm Impact Socket 18mm Impact Socket 19mm Impact Socket 21mm Impact Socket 22mm Impact Socket 23mm Impact Socket 24mm Impact Socket Accessory Extension Bar 125mmL Plastic Tray (1/6)   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less