Products
SP Air SP AIR Angle grinder 100mm SP1254G
SP AIR Angle grinder 100mm SP1254G Features It is a left-right handle that can be selected from left and right handles according to the work. Built-in safety governor mechanism to prevent accidents due to excessive speed. For repair work of automobile sheet metal, welding peeling, and ground leveling. For chamfering and deburring of all materials, and other general grinding work. specification No-load rotation speed (rpm): 12000 Overall length (mm): 235 Hose mounting port: NPT1 / 4 Operating air pressure (MPa): 0.62 Whetstone dimensions (mm): 100φ x 15 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.7 Mass (kg): 1.7
$263.29
SP Air SP AIR Angle grinder 180mm SP-1261G
SP AIR Angle grinder 180mm SP-1261G Features It is safe to control the rotation speed with a built-in governor mechanism. The handle can be attached from either the left or right depending on the work. For metal grinding, rust removal, and bead removal work. specification Overall length (mm): 270 Applicable whetstone dimensions Outer diameter x thickness x inner diameter (mm): 180 x 6 x 22 No-load rotation speed (min ^ -1): 7500 Air consumption (m3 / min): 0.8 Hose mounting port: NPT3 / 8 Exhaust: sideways No-load rotation speed (rpm): 7500 Operating air pressure: 0.62MPa Tip tool: Whetstone Exhaust direction: lower right Note: The grindstone is sold separately. Country of origin: Japan
$418.38
SP Air SP AIR Angle Sander / Polisher SP7500AHP
SP AIR Angle Sander / Polisher SP7500AHP Features Low center of gravity and good stability Easy to grind at low speed 70φ / 125φ pads can be attached Rear exhaust type that does not interfere with work Color hagi for car body sheet metal work For sanding and polishing work For small area repair work specification No-load rotation speed (rpm): 1800 Air consumption (m3 / min): 0.3 Hose intake: NPT1 / 4 Overall length (mm): 200 Pad size (mm): 70 or 125 Mass (kg): 1.2 Operating air pressure: 0.6MPa Paper used: Magic pad
$240.74
SP Air SP AIR Belt Sander 10mm & 12mm × 330mm SP-1370A
SP AIR Belt Sander 10mm & 12mm × 330mm SP-1370A Features One-touch belt replacement with the arm stopper. It is easy to replace the idle pulley at the tip. Lightweight and compact, the arm can be angled from straight to 90 ° inward. For sander work in hard-to-reach places such as bumps and dips. specification Belt dimensions (mm): 10/12 x 330 Belt speed (m / min): 1100 No-load rotation speed (min ^ -1): 16000 Air consumption (m3 / min): 0.4 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 275 Working air pressure (MPa): 0.62 No-load rotation speed (rpm): 16000 10 and 12 mm wide belts can be used Country of origin: Japan
$256.98
SP Air SP AIR Belt sander 20mm x 520mm SP1380
SP AIR Belt sander 20mm x 520mm SP1380 Features The angle of the arm can be changed according to the work content. One-touch replacement of the belt. Easy-to-operate throttle lever system. For surface polishing work of all materials such as stainless steel, aluminum, cast iron, wood, plywood, plastic, titanium alloy, bronze. specification Belt speed (m / min): 2580 No-load rotation speed (rpm): 17000 Overall length (mm): 365 Belt size (mm): 20 x 520 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.4
$303.86
SP Air SP AIR C surface small diameter beveler, SP-7252F
SP AIR C surface small diameter beveler, SP-7252F Features The minimum machined hole diameter is 6.8 mm. Ideal for chamfering and deburring small diameter bolt holes and long holes. The tip can be used 3 times at different angles. The chip is cooled by the cooling air system, and the durability is improved. Product specifications Specifications / standards Operating air pressure: 0.6MPa No-load rotation speed (min (-1st power)): 23000 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Chamfering ability: 1.5C Chamfer angle (°): 45 Overall length (mm): 112 No-load rotation speed (rpm): 23000
$457.15
SP Air SP AIR Die grinder 120 ° (angle head type) SP7202
SP AIR Die grinder 120 ° (angle head type) SP7202 Features The calculated ergonomic design makes it easy to operate without burdening the operator. Lightweight and compact 120 ° angle head type Rear exhaust type that does not interfere with work Throttle lever with one-touch operation safety stopper Built-in dial type air regulator Please attach various bars and sanding pads according to the application and use it for polishing and grinding work in narrow places. specification Hose intake: NPT1 / 4 Overall length (mm): 194 No-load rotation speed (rpm): 20000 Chuck inner diameter (mm): 6 Air consumption (m3 / min): 0.2 Mass (kg): 0.56 Tip tool: Shaft diameter 6 mm (grinding stone) Exhaust direction: Rear Operating air pressure: 0.62MPa
$174.02
SP Air SP AIR Die grinder 90 ° (angle head type) SP1200AH
SP AIR Die grinder 90 ° (angle head type) SP1200AH Features Easy-to-use angle head type. Lightweight, compact and easy to operate in tight spaces with one hand. High-speed rotation with less noise and vibration. (21000 per minute) Front exhaust. A handy type high-speed grinder. Please attach various bars according to the application and use it for finishing. It is ideal for fine correction work such as finishing work on drilled surfaces, chamfering cut surfaces and spot welded surfaces, and correcting various dies. (Collet 6mm) specification No-load rotation speed (rpm): 21000 Overall length (mm): 125 Collet size (mm): 6 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.45
$144.26
SP Air SP AIR Die grinder 90 ° (angle head type) SP7201
SP AIR Die grinder 90 ° (angle head type) SP7201 Features The calculated ergonomic design makes it easy to operate without burdening the operator. Lightweight and compact 90 ° angle head type Rear exhaust type that does not interfere with work Throttle lever with one-touch operation safety stopper Built-in dial type air regulator Please attach various bars and sanding pads according to the application and use it for polishing and grinding work in narrow places. specification Hose intake: NPT1 / 4 Overall length (mm): 160 No-load rotation speed (rpm): 20000 Chuck inner diameter (mm): 6 Air consumption (m3 / min): 0.2 Mass (kg): 0.55 Tip tool: Shaft diameter 6 mm (grinding stone) Exhaust direction: Rear Operating air pressure: 0.62MPa
$168.61
SP Air SP AIR Double action sander 125mmφ dust absorption type SP3905DFA5
SP AIR Double action sander 125mmφ dust absorption type SP3905DFA5 Features Uses a resin body that is easy to use and has a soft feel that improves work efficiency. Especially suitable for work in cold regions and cold days Low center of gravity design that fits the painted surface Mini size of 125φmm pad that fits comfortably in your hand Built-in air regulator Strong dust absorption type Ideal for finish polishing work especially in narrow spaces such as corners and curved surfaces specification No-load rotation speed (rpm): 11000 Overall length (mm): 132 Pad size (mm): 125 Orbit diameter (mm): 5 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.95
$303.86
SP Air SP AIR drill with built-in regulator 10mm SP1540
SP AIR drill with built-in regulator 10mm SP1540 Features Double gear reduction type spindle makes centering easy without shaft shake Can be widely used with a 4-stage air regulator Fine adjustment with vivid throttle Can be used for multiple purposes, from 6 & 8mm spot peeling work to hole drilling work up to 10mm. specification No-load rotation speed (rpm): 3000 Overall length (mm): 180 Hole drilling ability (mm): 10 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.98 Set contents and accessories: Chuck key
$166.81
SP Air SP AIR Impact Driver 6.35mm SP1826H
SP AIR Impact Driver 6.35mm SP1826H Features Smooth rotation with single dock clutch hammer mechanism Mini type that fits perfectly in your hand Built-in air regulator For small diameter screw tightening work for automobile sheet metal and general maintenance work specification No-load rotation speed (rpm): 11500 Overall length (mm): 120 Bit insertion angle (mm): 6.35 Screw capacity (mm): 6 Practical torque range (Nm): 7-41 Hose connection (NPT): 1/4 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 Mass (kg): 0.62
$170.41
SP Air SP AIR Impact Wrench 1100ft/lbs SP 3/4" Drive Stubby SP-1158M
SP AIR Impact Wrench 1100ft/lbs SP 3/4" Drive Stubby SP-1158M Description IMPACT WRENCH 1100FT/LBS SP 3/4“DR STUBBY Categories: Impact Wrenches, Air Tools, Air Tools Description Additional information Product Description Features: Made in Japan by SP Air Well suited for trucking and tyre industries Stubby style Adjustable torque Single dog clutch Includes nitto style air fitting Specifications: Length: 200mm Capacity: 25mm Weight: 5.1kg Air Con: 1080L/min Max Bolt Busting Torque: 1900Nm Max Torque: 1500Nm Working Torque: 900Nm
$577.98
SP Air SP AIR Impact wrench 19mm square SP1156TR, SP-1156TR(3/4SQ)
SP AIR Impact wrench 19mm square SP1156TR, SP-1156TR(3/4SQ) Feature Equipped with a twin regulator mechanism that saves the trouble of power adjustment for forward and reverse rotation. High power output with less vibration due to pin type clutch hammer. For U-bolt attachment / detachment work for medium and large vehicles, engine maintenance, and other general heavy maintenance. * Tightening torque is a guideline. The torque value changes depending on the conditions. specification Capacity Bolt diameter (mm): 22 Socket drive angle (mm): 19 No-load rotation speed (rpm): 4600 Air consumption (m3 / min): 0.8 Hose mounting port: NPT1 / 4 Exhaust: Handle Overall length (mm): 280 Hammer type: Pin clutch method Tightening torque (N ・ m): 1100 Mass (kg): 5.4 Recommended hose inner diameter: 12.7mm Operating air pressure: 0.62MPa
$423.79
SP Air SP AIR Impact Wrench 3/8’’Dr - Pistol Composite, SP-7825(3/8SQ)
SP AIR Impact Wrench 3/8’’Dr - Pistol Composite, SP-7825(3/8SQ) • Length: 110mm• Capacity: 12mm• Weight: 0.68kg• Air Con: 468L/min Max• Bolt Busting Torque: 110nm• Max Torque: 80nm• Working Torque: 68nm
$184.85
SP Air SP AIR K-1 ratchet wrench 9.5 mm square, SP-7765(3/8SQ)
SP AIR K-1 ratchet wrench 9.5 mm square, SP-7765(3/8SQ) Features It is highly durable. Secure the ratchet anvil firmly. Use Interior / exterior work of the car body, engine repair of small cars and motorcycles. If you use a long socket, you can tighten and loosen nuts for long bolts such as bumpers. Product specifications Specifications / standards Built-in air regulator Exhaust direction 360 ° rotary rear exhaust Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 25 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Overall length (mm): 195 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 No-load rotation speed (rpm): 220
$137.95
SP Air SP AIR light weight impact wrench 12.7 mm square,SP-7140(1/2SQ)
SP AIR light weight impact wrench 12.7 mm square,SP-7140(1/2SQ) Features Equipped with a rubber grip that is easy to hold and does not slip. Built-in air regulator. The reverse side (loose) is powered up with a built-in bias motor. Use Tire work for passenger cars, U-bolt attachment / detachment work for light trucks, etc. Product specifications Specifications / standards Operating air pressure: 0.62MPa Recommended hose inner diameter: 6.35 mm Capacity Bolt diameter (mm): 16 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 450 No-load rotation speed (min (-1st power)): 5800 Air consumption ((M3) / min): 0.6 Hose mounting port: NPT1 / 4 Exhaust: Down Overall length (mm): 185 Hammer type: Twin hammer No-load rotation speed (rpm): 5800 Capacity bolt diameter
$197.47
SP Air SP AIR Mini Air Saw SP7600
SP AIR Mini Air Saw SP7600 Features Ultra-mini size that makes it easy to cut in narrow spaces Lever with safety stopper to prevent accidents due to unexpected start Rear exhaust (rear exhaust) type With a hand-friendly rubber grip Easy blade replacement For cutting body panels and other thin iron plates specification Overall length (mm): 222 Cutting capacity (mm): 1.0 Number of strokes (rpm): 3400 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.45
$249.77
SP Air SP AIR Mini Ratchet Wrench 6.35mm Square ,SP-1760A(1/4SQ)
SP AIR Mini Ratchet Wrench 6.35mm Square ,SP-1760A Features A mini ratchet wrench weighing only 165 mm and 0.5 kg. The ball-type anvil makes it easy to attach and detach the socket. The ratchet head is hardened and has excellent durability. Comes with a red cover to protect the ratchet head. Use For detailed work such as interior / exterior work of the car body, engine repair of small cars and motorcycles, bench work and installation work of headlights, air conditioners, meters. Product specifications Specifications / standards Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 6.35 Maximum tightening torque (N ・ m): 20 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Overall length (mm): 165 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 No-load rotation speed (rpm): 310
$119.93
SP Air SP AIR Mini Ratchet Wrench 9.5mm Square, SP-1762(3/8SQ)
SP AIR Mini Ratchet Wrench 9.5mm Square, SP-1762 Features The ball-type anvil makes it easy to attach and detach the socket. The ratchet head is hardened and has excellent durability. Comes with a red cover to protect the ratchet head. A mini ratchet wrench weighing only 165 mm and 0.5 kg. Use For detailed work such as interior / exterior work of the car body, engine repair of small cars and motorcycles, bench work and installation work of headlights, air conditioners, meters. Product specifications Specifications / standards Operating air pressure: 0.62MPa Recommended hose inner diameter: 6.35 mm Capacity Bolt diameter (mm): 10 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 20 No-load rotation speed (min (-1st power)): 310 Air consumption ((M3) / min): 0.2 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 165 No-load rotation speed (rpm): 310
$98.28
SP Air SP AIR Needle Scaler SP1460
SP AIR Needle Scaler SP1460 Features Straight type Spatter removal of welded parts, rust and shell removal of ships, etc. specification Overall length (mm): 230 Piston diameter (mm): 20 Number of hits (bpm): 5000 Piston stroke (mm): 12 Needle diameter (mm): 3 Number of needles (pieces): 12 Needle length (mm): 180 Weight (kg): 1.26 Air consumption (m / min): 0.2 Hose mounting port (in) 1/4 Working air pressure (Mpa): 0.62 Recommended hose inner diameter (mm): 6.35 Mass (kg): 1.26
$343.54
SP Air SP AIR Orbital sander 100 × 180mm Dust absorption type SP3800DFA5
SP AIR Orbital sander 100 × 180mm Dust absorption type SP3800DFA5 Features Low center of gravity design makes it easy to use and does not get tired even when working for a long time With a satin finish rubber cap that fits in your hand Built-in air regulator Outstanding operability due to the adoption of a lightweight body Strong dust absorption type For all kinds of polishing work such as sharpening and smoothing putty Ideal for line-out finish polishing work specification No-load rotation speed (rpm): 7000 Overall length (mm): 230 Pad size (mm): 100 x 180 Orbit diameter (mm): 5 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.57
$327.31
SP Air SP AIR Orbital sander 75 × 110mm Dust absorption type SP3900DFA3
SP AIR Orbital sander 75 × 110mm Dust absorption type SP3900DFA3 Features Uses a resin body that is easy to use and has a soft feel that improves work efficiency. Especially suitable for work in cold regions and cold days 75mm x 110mm size that fits comfortably in your hand Built-in air regulator Strong dust absorption type Low center of gravity design that fits the painted surface Ideal for finish polishing work especially in narrow spaces such as corners and curved surfaces specification No-load rotation speed (rpm): 9500 Overall length (mm): 117 Pad size (mm): 75 x 110 Orbit diameter (mm): 3 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 0.86
$251.57
SP Air SP AIR Punch Flange Tool 5.5mmφ SP1600B
SP AIR Punch Flange Tool 5.5mmφ SP1600B Features Efficiently handle flange work and punching work with two roles in one unit Optimal when used in combination with a CO2 semi-automatic welding machine High power air hydro type One unit can perform two roles for punching and flange work for body repair work. specification Overall length (mm): 175 Folding ability (mm): 1.5 Hole drilling ability (mm): 5.5φ Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.0
$229.03
SP Air SP AIR Reciprocating saw SP-7610
SP AIR Reciprocating saw SP-7610 Features By incorporating a crank mechanism, the power of the motor is efficiently transmitted to the blade. We have achieved power that cannot be obtained with a piston type air saw. specification Stroke length (mm): 12 Cutting capacity (mm): Iron plate 4.0 Number of strokes (times / minute): 5300 Air consumption (m3 / min): 0.5 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 207 Operating air pressure: 0.62MPa Country of origin: Japan
$280.43
SP Air SP AIR SP-1190P-2 1" Impact Wrench , 2" Short
SP AIR SP-1190P-2 1" Impact Wrench , 2" Short Spec Spec of SP-1190P-2 Bolt Capacity 38 mm Max Torque 2200 Nm Working Torque Range 200-1350 Nm Free Speed 4,000 rpm Length 250 mm Weight 9 kg Hammer Mechanism Single Dog
$891.77
SP Air SP AIR SP-1191DH 1" Air Impact Wrench
SP AIR SP-1191DH 1" Air Impact Wrench Spec Spec of SP-1191DH Bolt Capacity 32 mm Max Torque 1650 Nm Working Torque Range 280-1000 Nm Free Speed 5,500 rpm Length 220 mm Weight 6.2 kg Hammer Mechanism Single Dog
$600.52
SP Air SP AIR SP-1192EX2 （1" Impact Wrench）
SP AIR SP-1192EX2 （1" Impact Wrench） Spec Spec of SP-1192EX2 Bolt Capacity 38 mm Max Torque 1500 Nm Working Torque Range 200-1300 Nm Free Speed 4,100 rpm Length 360 mm Weight 6.3 kg Hammer Mechanism Twin Dog
$937.75
SP Air SP AIR SP-1193GEP2 （1" Impact Wrench）
SP AIR SP-1193GEP2 （1" Impact Wrench） Spec Spec of SP-1193GEP2 Bolt Capacity 41 mm Max Torque 2100 Nm Working Torque Range 280-2100 Nm Free Speed 4,000 rpm Length 285 mm Weight 10.5 kg Hammer Mechanism Pinless
$816.02
SP Air SP AIR SP-1800A 1/4" Screw Driver
SP AIR SP-1800A 1/4" Screw Driver Spec Spec of SP-1800A Chuck Hex. Size 6.35 mm Working Torque Range 5-14 Nm Free Speed 1,800 rpm Length 250 mm Weight 1.3 kg
$259.68
SP Air SP AIR SP-1810A 1/4" Screw Driver
SP AIR SP-1810A 1/4" Screw Driver Spec Spec of SP-1810A Chuck Hex. Size 6.35 mm Working Torque Range 11-17 Nm Free Speed 2,200 rpm Length 205 mm Weight 1.4 kg
$259.68
SP Air SP AIR SP-5000GE 1" Impact Wrench ,8"Long
SP AIR SP-5000GE 1" Impact Wrench ,8"Long Spec Spec of SP-5000GE Bolt Capacity 50 mm Max Torque 2700 Nm Working Torque Range 280-1900 Nm Free Speed 3,000 rpm Length 635 mm Weight 17.9 kg Hammer Mechanism Pinless
$910.70
SP Air SP AIR straight air drill 10mm, SP-1523D
SP AIR straight air drill 10mm, SP-1523D Features It is a mini size that is much lighter than an electric drill with the same performance. The compact design weighs about half the weight of an electric drill. Comes with a silencer. Use For general drilling work. Product specifications Specifications / standards Operating air pressure: 0.62MPa Chuck capacity (mm): 10 No-load rotation speed (min (-1st power)): 3800 Air consumption ((M3) / min): 0.4 Drilling capacity (mm): 10 Overall length (mm): 192 Hose mounting port: NPT1 / 4 Exhaust: Rear No-load rotation speed (rpm): 3800
$162.30
SP Air SP AIR Super Light weight Impact Wrench 12.7mm sq,SP-7144A(1/2SQ)
SP AIR Super Light weight Impact Wrench 12.7mm sq,SP-7144A(1/2SQ) Spec Bolt Diameter (mm): 16 Socket Bayonet angle (mm): 12.7 maximum clamping torque (N, m): 550 no load Speed r.p.m. (rpm): 6200 Air consumption (m3/min): 0.6 Hose mounting opening: NPT1/4 exhaust: lower Length (mm): 154 Hammer Type: Twin Hammer Mass (kg): 1.78 Recommended Hose inner diameter: 6.5mm use Air Pressure: 0. 62MPa Application: Automatic car maintenance. Country of origin: Japan Weight: 1.78kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: SP7144A
$240.74
SP Air SP AIR Swing Air Ratchet Wrench 9.5mm Square ,SP-1772(3/8SQ)
SP AIR Swing Air Ratchet Wrench 9.5mm Square ,SP-1772(3/8SQ) Feature The head rotates 360 °. The position is determined every 90 °. You can change the direction of the lever even in places where you can hit the lever to pull it. For work in hard-to-reach places such as the engine room of a car. specification Capacity Bolt diameter (mm): 10 Socket insertion angle (mm): 9.5 Maximum tightening torque (N ・ m): 20 No-load rotation speed (min ^ -1): 220 Air consumption (m3 / min): 0.2 Hose mounting port: NPT1 / 4 Exhaust: Rear Overall length (mm): 168 No-load rotation speed (rpm): 220 Operating air pressure: 0.62MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan
$127.14
SP Air SP AIR Ultra light Impact Driver 6.35mm SP-7825H
SP AIR Ultra light Impact Driver 6.35mm SP-7825H Features Super lightweight with a reinforced resin body. It has excellent operability with easy forward / reverse switching with one hand. You can fine-tune and control the speed with the trigger. A mini type that fits perfectly in your hand. For attaching and detaching small diameter bolts for general maintenance work such as automobiles and aircraft. Ideal for work in tight spaces. specification Bit outlet (mm): 6.35 Capacity screw size (mm): 6 Maximum tightening torque (N ・ m): 48 No-load rotation speed (min ^ -1): 17000 Air consumption (m3 / min): 0.4 Hose mounting port: NPT1 / 4 Exhaust: Down Overall length (mm): 120 Chuck method: Bit sleeve type No-load rotation speed (rpm): 17000 Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.62MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan
$184.85
SP Air SP AIR Ultralight 1600 Class Impact Wrench, SP-7146EX(1/2SQ)
SP AIR Ultralight 1600 Class Impact Wrench, SP-7146EX(1/2SQ) Features It is a composite body, ultra-lightweight and ultra-short body. Use For tire attachment / detachment work. Product specifications Specifications / standards Operating air pressure: 0.62MPa Capacity Bolt diameter (mm): 16 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 330 No-load rotation speed (min (-1st power)): 9000 Air consumption ((M3) / min): 0.6 Hose mounting port: NPT1 / 4 Exhaust: Down Overall length (mm): 133 Hammer type: Twin hammer No-load rotation speed (rpm): 9000
$219.11
SP Air SP AIR Ultralight air drill 13mm (with forward / reverse rotation mechanism) SP-7527
SP AIR Ultralight air drill 13mm (with forward / reverse rotation mechanism) SP-7527 Features Super lightweight with a reinforced resin body. You can easily switch between forward and reverse with one hand. You can fine-tune and control the speed with the trigger. The total length is short and it is easy to see at hand. For general drilling work. Since it has a forward / reverse rotation function, it is also suitable for drilling holes in wood, etc., and screws can be attached / detached with a screwdriver bit. Tapping correction work is possible. specification Chuck capacity (mm): 13 No-load rotation speed (min ^ -1): 400 Air consumption (m3 / min): 0.4 Drilling capacity (mm): 13 Overall length (mm): 180 Hose mounting port: NPT1 / 4 Exhaust: Rear Operating air pressure: 0.62MPa With forward / reverse rotation function Country of origin: Japan
$219.11
Super Tool SUPER TOOL Aluminum Wide Motor Wrench-Quick Adjusting
SUPER TOOL ALUMINUM WIDE MOTOR WRENCH-Quick Adjusting Features • One push quick slide mechanism.• Optimal for a plated nut, or a soft nut materials as copper, brass etc.• Attention: Avoid the torque exceeding 100N · m for tightening work. Specifications Material Body: Aluminum Product Specifications Mouth Width：0～80mm
$29.30
![[SUPER TOOL] BELT WRENCH-Aluminum Alloy Body (Non-scratching Type)](//wowtoolz.com/cdn/shop/products/001_copy_a34bc849-a947-4a54-9fca-2a729654a22c.png?v=1570351957&width=645)
Super Tool SUPER TOOL BELT WRENCH-Aluminum Alloy Body (Non-scratching Type)
SUPER TOOL BELT WRENCH-Aluminum Alloy Body (Non-scratching Type) Features • High strength aluminum body is light and improves durability.• Special processed nylon belts ensure durability and non scratch lasting.• Optimal for tightening works of polished, plated, vinyl and lining pipes with non scratching.• Each size of belt is available, so it can be replaced easily. Specifications Material Aluminum Alloy Finish Silver Baked-on finish Product Specifications Applicable pipe to bite: 15～80 to 30～320mm Product Specifications All 4 sizes Product Code. Item No. Applicable pipe to bite Full Length (mm) Weight (G) Size External diameter 209-0690 BW-2 10A~65A (3/8B~2-1/2B) 15~80 300 320 209-2519 BW-2L 10A~250A (3/8B~10B) 15~280 300 380 209-0706 BW-5 25A~300A (1B~12B) 30~175 450 800
$36.55
Super Tool SUPER TOOL DOUBLE-SIZE RATCHET WRENCH (Reversible Claw Type) RN1012～4650
SUPER TOOL DOUBLE-SIZE RATCHET WRENCH SPECIFICATIONS Material Special Alloy Steel Finish Cathodic Electrodeposition Coating Product Specifications Size: 10×12～46×50 Product Specifications All 34 sizes ● The opening of the socket is for easy reversible type of easy cleaning of sand and dirt, etc.● 34 sizes of double socket type (Reversible claw type) are avaible to cover a variety of uses.● Lubricate before use. Product Code. Size (mm) L (mm) D (mm) d2 (mm) d3 (mm) t ℓ 1 (mm) Weight (G) 209-0016 10×12 225 28 18 15 14 11 160 209-0025 10×13 225 28 18 15 14 11 160 209-0034 10×14 225 28 19 15 14 11 160 209-0043 11×13 225 28 18 16 14 11 160 209-0052 12×14 225 28 19 18 14 11 160 209-0061 13×17 265 34 23 18 16 14.5 240 209-0070 13×19 310 41 26 18 18 16 400 209-0089 14×15 265 34 20 19 19 14.5 240 209-0098 14×17 265 34 23 19 16 14.5 240 209-0104 17×19 310 41 26 24 16 16 400 209-0113 17×21 310 41 29 24 18 16 400 209-0122 17×22 310 42 30 24 18 16 430 209-0131 19×21 310 41 29 27 18 16 400 209-0140 19×22 310 42 30 26 18 16 430 209-0159 19×24 355 49 33 26 20 18 680 209-0168 21×24 355 49 33 28 20 18 680 209-0177 21×26 355 49 36 28 20 18 680 209-0186 21×27 355 49 37 28 20 18 680 209-0195 22×24 355 49 33 30 20 18 680 209-0201 22×27 355 49 37 30 20 18 680 209-0229 24×26 355 49 36 33 20 18 680 209-0238 24×27 355 49 37 33 20 18 680 209-0247 24×30 400 62 42 33 22 20.5 1,080 209-0256 26×32 400 62 44 36 22 20.5 1,080 209-0265 27×30 400 62 41 38 22 20.5 1,080 209-0274 27×32 400 62 44 38 22 20.5 1,080 209-0283 30×32 400 62 44 42 22 20.5 1,080 209-0292 32×35 445 67 47 43 24 21.5 1,400 209-0308 32×36 445 67 49 43 24 21.5 1,400 209-0317 35×41 490 76 55 47 26 24 2,050 209-0326 36×41 490 76 55 49 26 24 2,050 209-0335 38×41 490 76 55 49 26 24 2,050 209-0344 41×46 500 83 61 55 29 23.5 2,500 209-0353 46×50 545 89 66 61 29 25.5 3,080
$16.16
Super Tool SUPER TOOL Electric Screwdriver Socket, Driver bit type (Replaceable bit)
SUPER TOOL Electric Screwdriver Socket, Driver bit type (Replaceable bit) Features • Adaptable to 18V electric impact driver.• Usable to a lifetime of socket because of a replaceable bit.• Embedded ejector receive the driver bit and the bit will not inserted deeply into the socket.• Bit can be removed even after due to ejector. SPECIFICATIONS Product Specifications Applicable width across flats(mm): 7 / 8 / 10 / 12 / 13 / 14 / 15 / 17 / 19 / 21 / 24 / 27 / 30 / 32 / 36 mm Product Specifications Socket: 6pt. (12pt for 17 / 19 / 21 mm) Product Specifications Bit size: 6.35mm (Item No. DB2S65 can be applicable) Conventional driver bit can be used. Product Specifications Backside of socket have hex part（DSE17～DSE36） Product Code. Item No. width across flats (S1) width across flats (S2) L (mm) ￠D ￠D1 ￠D2 B1 B2 Weight (G) 209-2616 DSE-8 8 - 80 12.0 19.0 - 12 47 103 209-2625 DSE-10 10 - 80 14.5 19.0 - 16 47 108 209-2634 DSE-13 13 - 80 18.5 19.0 - 20 47 120 209-2643 DSE-14 14 - 80 20.0 19.0 - 22 47 120 209-2652 DSE-17 17 19 80 23.5 21.0 - 24 47 130 209-2661 DSE-19 19 19 80 23.5 22.0 15.0 24 47 136
$29.48
Super Tool SUPER TOOL HOOK SPANNER HW105 / 165 / 105A
SUPER TOOL HOOK SPANNER HW105 / 165 / 105A Features • Spanner for tightening and removing round nuts with notches or holes.• Can be used according to each size.• HW105A is for nuts with holes. Specifications Material Special Alloy Steel Finish Nickel Chrome Plate Product Specifications Applicable diameter of round nut：35～105 / 95～165 Product Specifications All 3 sizes ■ Standard Type Product Code. Item No. L (mm) a (mm) b (mm) t (mm) Weight (G) 209-0584 HW-105, 270 4 6.5 8 360 209-0593 HW-165, 365 6.5 8 10 720 ■ Round Tip Type Product Code. Item No. L (mm) a (mm) b (mm) t (mm) Weight (G) 209-0609 HW-105A, 270 ￠6 6.5 8 360
$35.64
![[SUPER TOOL] RATCHET WRENCH- Double Size (Long Socket Type)](//wowtoolz.com/cdn/shop/products/001_copy_50dcfb31-8118-4d6c-84fa-e2a782cba174.png?v=1570352114&width=645)
Super Tool SUPER TOOL RATCHET WRENCH- Double Size (Long Socket Type)
SUPER TOOL RATCHET WRENCH- Double Size (Long Socket Type) Features• Optimal for tightening in the deep grooves of C or H shaped channels and angles.• Convenient for use on long bolts (U nuts of car-bodies and ducts).• The opening of the socket for change-over of the reversible type enables easy cleaning of sand and dirt, etc.• Lubricate before use.• All of the size have hole for safety rope. (17x19 / 17x21 / 19x21 have 2 holes) SPECIFICATIONS Material Special Alloy Steel Finish Green baked-on finish Product Specifications Size：10×12～32×36 Product Specifications All 16 sizes Product Code. Size (mm) L (mm) D (mm) d2 (mm) d3 (mm) t ℓ 1 (mm) ℓ 2 (mm) Weight (G) 209-0362 10×12L 225 28 15 18 14 10 28 160 209-0371 10×13L 225 28 15 18 14 10 28 180 209-0380 12×14L 225 28 18 19 14 11 29 160 209-0399 13×17L 265 34 18 23 16 14 52 290 209-0405 14×17L 265 34 19 23 16 14 52 300 209-0414 17×19L 310 41 23 26 18 16 52 450 209-0423 17×21L 310 41 23 28 18 16 52 480 209-0432 19×21L 310 41 26 28 18 16 52 460 209-0441 19×24L 355 49 26 32 20 18 64 780 209-0450 24×27L 355 51 32 36 20 18 72 860 209-0469 24×30L 400 62 32 41 22 20 76 1,270 209-0478 27×32L 400 62 36 43 22 20 82 1,350 209-0487 32×36L 445 67 43 49 24 21 91 1,800
$32.24
![[SUPER TOOL] RATCHET WRENCH-Double Size (Double Long Socket Type)](//wowtoolz.com/cdn/shop/products/001_copy_34b48fcc-f75a-4673-a96b-1838a9a8194e.png?v=1570352154&width=645)
Super Tool SUPER TOOL RATCHET WRENCH-Double Size (Double Long Socket Type)
SUPER TOOL RATCHET WRENCH-Double Size (Double Long Socket Type) Features • Optimal for tightening in the deep grooves of C or H shaped channels and angles.• Convenient for use on long bolts (U nuts of car-bodies and ducts).• The opening of the socket for change-over of the reversible type enables easy cleaning of sand and dirt, etc.• Lubricate before use.• All of the holes have safety holes (17x19 / 17x21 / 19x21 have 2 holes). Specifications Material Special Alloy Steel Finish Green baked-on finish Product Specifications Size: 10×12～19×21 Product Specifications All 12 sizes Product Code. Size (mm) L (mm) D (mm) d2 (mm) d3 (mm) t ℓ 1 (mm) ℓ 2 (mm) Weight (G) 209-1370 10×12WL 225 28 18 15 14 32 32 230 209-0496 10×13WL 225 28 18 15 14 32 32 230 209-0502 11×13WL 225 28 18 16 14 32 32 230 209-0511 12×14WL 265 28 19 18 14 32 32 230 209-1440 13×14WL 265 28 19 18 14 32 32 230 209-0520 13×17WL 265 34 23 18 16 33 33 340 209-0539 14×17WL 265 34 23 19 16 33 33 340 209-0548 17×19WL 310 41 26 23 18 34 34 500
$27.83
![[SUPER TOOL] SUPER TONG-Chain Pipe Wrench](//wowtoolz.com/cdn/shop/products/001_copy_058f9824-662e-4af7-95ac-15761413f28b.png?v=1570352190&width=645)
Super Tool SUPER TOOL SUPER TONG-Chain Pipe Wrench
SUPER TOOL SUPER TONG-Chain Pipe Wrench Features • Optimal for work in narrow places where pipe wrenches can not be used.• Possible to work repeatedly with one-time setting. (Not for coated steel pipes)• For ST3, 3L and 4L, it is possible to add pipes (Separately sold).• For sizes of more than ST1.5 attach a stopper to protect against loosening. SPECIFICATIONS Material Special Alloy Steel Finish Red baked-on finish Product Specifications Applicable pipe to bite: 12～50 to 60～510mm Product Specifications All 10 sizes Product Code. Item No. Applicable pipe to bite Full Length (mm) Weight (G) Size External diameter (mm) 209-0618 ST-1 1/4B(8A)~3B(80A) 14~89 302 800 209-0627 ST-1.5 3/8B(10A)~4B(100A) 17~120 425 1,800 209-0636 ST-2 3/4B(20A)~6B(150A) 25~170 510 2,600 209-0645 ST-2.5 1B(25A)~8B(200A) 34~230 695 5,300 209-0654 ST-3 1B(25A)~10B(250A) 35~270 745 6,300 209-0663 ST-3L 1B(25A)~12B(300A) 35~320 745 6,600 209-0672 ST-4 2B(50A)~20B(500A) 60~510 745 10,500
$40.60
takagi TAKAGI A hanger-type compact reel, Aurora LIGHT 10m ID 7.5mm, R1410NB
TAKAGI A hanger-type compact reel, Aurora LIGHT 10m ID 7.5mm, R1410NB Aurora LIGHT 10m ID 7.5mm A hanger-type compact reel with a hose winding handle. It can be attached not only to lattices and walls, but also to columns. The watering nozzle can be switched between 4 types. Product name Aurora LIGHT 10m ID 7.5mm Product code R1410NB Size (WxDxH mm) 211 x 217 x 281 Weight (g) 1596 3 changes according to the use! Hang in various places! Install! Store! Hook it vertically with a hook. Hang it sideways with a hook. Compact body and nozzle! It can also be mounted on a column. Compact design that does not bother with storage. Palm-sized compact design. One click for water flow and water stop! 4 Water shape (The water shape depends on the water pressure.) Kiri Straight Jolo Shower Check connection faucet before purchase
$33.28
takagi TAKAGI A little hose, G303
TAKAGI A little hose, G303 A little hose A short hose that can be used by simply plugging it into the faucet. Product name A little hose Product code G303 Size (WxDxH mm) 108 x 38 x 335 Weight (g) 69 To prevent water splashing! Just plug it into the faucet.
$7.90
![[SUPER TOOL] BELT WRENCH-Aluminum Alloy Body (Non-scratching Type)](http://wowtoolz.com/cdn/shop/products/001_copy_a34bc849-a947-4a54-9fca-2a729654a22c.png?v=1570351957&width=645)
![[SUPER TOOL] RATCHET WRENCH- Double Size (Long Socket Type)](http://wowtoolz.com/cdn/shop/products/001_copy_50dcfb31-8118-4d6c-84fa-e2a782cba174.png?v=1570352114&width=645)
![[SUPER TOOL] RATCHET WRENCH-Double Size (Double Long Socket Type)](http://wowtoolz.com/cdn/shop/products/001_copy_34b48fcc-f75a-4673-a96b-1838a9a8194e.png?v=1570352154&width=645)
![[SUPER TOOL] SUPER TONG-Chain Pipe Wrench](http://wowtoolz.com/cdn/shop/products/001_copy_058f9824-662e-4af7-95ac-15761413f28b.png?v=1570352190&width=645)
