A corner radius end mill for pocketing and contouring where a radius on the part corner or a stronger cutting edge is needed. Used on milling machines and machining centers in mold shops, job shops and production plants.
| Model |
Specification |
Sold as |
| GSCRE2-060R02 |
GS-CR-EDS D6.0(R0.2)X6X15X90 (G2C060020) |
1 pc |
| GSCRE2-080R05 |
GS-CR-EDS D8.0(R0.5)X8X20X100 (G2C080050) |
1 pc |
| GSCRE2-100R05 |
GS-CR-EDS D10.0(R0.5)X10X25X100 (G2C100050) |
1 pc |
| GSCRE2-060R05 |
GS-CR-EDS D6.0(R0.5)X15X60 (G2C060050C) |
1 pc |
| GSCRE2-080R1 |
GS-CR-EDS D8.0(R1)X8X20X70 (G2C080100C) |
1 pc |
| GSCRE2-040R05 |
GS-CR-EDS D4.0(R0.5)X6X11X70 (G2C060050) |
1 pc |
| GSCRE2-060R05 |
GS-CR-EDS D6.0(R0.5)X6X15X90 (G2C060050) |
1 pc |
| GSCRE2-080R05-70 |
GS-CR-EDS D8.0(R0.5)X8X20X70 (G2C080050C) |
1 pc |
| GSCRE2-100R10 |
GS-CR-EDS D10.0(R1)X10X25X100 (G2C100100) |
1 pc |
| GSCRE2-100R20 |
GS-CR-EDS D10.0(R2)X10X25X100 (G2C100200) |
1 pc |
| GSCRE2-120R05 |
GS-CR-EDS D12.0(R0.5)X12X30X110 (G2C120050) |
1 pc |
| GSCRE2-020R01 |
GS-CR-EDS D2.0(R0.1)X6X6X50 (G2C020010) |
1 pc |
| GSCRE2-120R20 |
GS-CR-EDS D12.0(R2)X12X30X110 (G2C120200) |
1 pc |
| GSCRE2-120R1 |
GS-CR-EDS D12.0(R1.0)X12X30X110 (G2C120100) |
1 pc |
| GSCRE2-080R2 |
GS-CR-EDS D8.0(R2)X8X20X70 (G2C080200C) |
1 pc |
| GSCRE2-060R03 |
GS-CR-EDS D6.0(R0.3)X15X60 (G2C060030C) |
1 pc |
| GSCRE2-060R1 |
GS-CR-EDS D6.0(R1.0)X6X15X90 (G2C060100) 6XR1 |
1 pc |
| GSCRE2-060R2 |
GS-CR-EDS D 6XR2/2F/carbide/TIAlN/60/15/6 (G2C060200C ) |
1 pc |
| GSCRE2-030R03 |
GS-CR-EDS D3.0(R0.3)X6X8X60 (G2C030030) |
1 pc |
OSG of Japan is a major manufacturer of taps, drills, end mills and thread-forming tools for metalworking.
