3.PEAKS

74 products


  • [3PEAKS] Top Cutters

    3.Peaks 3.peaks Top Cutters TC

    A blade enters directly directly above. Reverse hand handling possible.  You can cut deep places. We have prepared 4 different blade widths according to your work.◦ Elastic elastomer resin grip which is familiar to hand◦ Coil spring for easy continuous operation◦ Open too much with prevention pin (※ TC - 10Z only) material Chrome vanadium steel * TC-10 only use S58C Hardness (HRC) 52 ~ 60 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) Blade Wide (mm)  Material Spring (g) Plastic mm 217-1269 TC-3Z 140 ●  ◎  125 2.0 3.0 217-1278 TC-5Z 140 ●  ◎  125 3.0 5.0 217-0400 TC-7Z 140 ●  ◎  130 4.0 7.0 217-1287 TC-10Z 150 ●  ◎  155 4.0 10.0 ※ grip: ● = elastomer ◎ = coil spring

  • [3.PEAKS] Long Stainless-Steel Cutting Nippers LS-01 | 217-0358

    3.Peaks 3.peaks Long Stainless-Steel Cutting Nippers LS-01

    To wire rod and plastic cutting.   It is the largest Nippa in the stainless steel series. Even if it is big, the weight is lighter than the forged product of the same size.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 52 to 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0358 LS-01 165 ●  □  95 1.6 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Micro Long-Nose Pliers MR

    3.Peaks 3.peaks Micro Long-Nose Pliers

    Thin and long tip shape. It is a preeminent grasp feeling.  With exquisite weight balance and high precision tip, grasp fine wire and parts securely.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0668 MR-120 120 ■  ◎  60 2.6 217-0677 MR-150 150 ■  ◎  85 2.6 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Edge-Plastic Nippers EP

    3.Peaks 3.peaks Edge-Plastic Nippers EP

    Blade angle 42 °. The blade enters from an oblique direction.  Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 42°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-1339 EP-115 115 ■  ◎  55 1.5 217-1348 EP-115R 115 ■  ◎  55 1.5 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Edge-Cutting Nippers SM-06 | 217-0446

    3.Peaks 3.peaks Edge-Cutting Nippers SM-06

    The blade enters from an oblique direction. Reverse hand handling possible.  Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ SM-06: Easy fit to hand Elastomer resin grip / Plastic spring (durability about 10 times compared to our company) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 42 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0446 SM-06 115 ●  □  55 1.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3.PEAKS] Precision Nippers SN-130 | 217-0288

    3.Peaks 3.peaks Precision Nippers SN-130

    Small class maximum cutting ability. High precision and beautiful cut surface.  We used the same top quality steel as the power nipper and finished the blade with extremely high precision.  With outstanding sharpness, it corresponds to piano wire · hard steel wire. It is a beautiful and sharp cut surface.  * Custom made cutting of Kevlar fiber is also possible. Please contact us.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material SK 85 (SK 5) Hardness (HRC) 62 ~ 67 (blade part) Blade angle 13°  JIS - PAT. ○  Product Code. Part number Nominal size grip weight Cutting Capacity(mm) (mm)  Material Spring (g) Wire Copper Wire Piano Wire 217-0288 SN-130 130 ●  □  90 2 3.2 0.5 ※ grip: ● = elastomer □ = plastic spring

  • [3.PEAKS] New-Size Long-Nose Pliers

    3.Peaks 3.peaks New-Size Long-Nose Pliers

    A completely new nominal size. Medium size of JIS standard.  The size of the hand is each person. In order to improve the ease of use and work efficiency, we are pursuing the appropriate size of the handset. It is a new design grip that is easy to grip and easy to enter power.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire 217-0039 RP-140Z-S 140 ●  □  105 1.5 2.6 217-0048 RP-165Z-S 165 ●  □  140 1.9 3.2 ※ grip: ● = elastomer □ = plastic

  • 3.PEAKS Bent-Cutting Nippers SP-42

    3.Peaks 3.PEAKS Bent-Cutting Nippers SP-42

    Blade angle 60 °. You can reverse hand.  Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 60 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic Copper Wire Wire 217-0756 SP-42 150 ●  □  68 4.0 1.6 1.0 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Wire Craft Long-Nose Pliers CR-02 | 217-0349

    3.Peaks 3.peaks Wire Craft Long-Nose Pliers CR-02

    Dedicated tool developed jointly with modeling artists.  Weight reduction to make it easy for children and women to handle. I stuck with balance and finishing.  Please enjoy the world of wire crafts with crafted pliers with a scored tip that is hard to scratch and craft nippers with safety considerations.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Chrome vanadium steel Hardness (HRC) 54 - 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Copper Wire 217-0349 CR-02 150 ●  □  100 1.2 2.6 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Plastic Nippers PNP-190G-S | 217-0738

    3.Peaks 3.peaks Plastic Nippers PNP-190G-S | 217-0738

    Staple items. Flat and Earl, two kinds of blade surface shape.  Despite being a standard product, we pursued the shape and structure until the limit.  A sharp blade finished by hand.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Vinyl grip with easy-to-purchase price◦ Coil spring for easy continuous operation◦ Stopper with stick preventive (blade back)◦ Blade opening adjustment function (* nominal size 190 mm model number only) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0738 PNP-190 G-S 190 ■  ◎  220 8.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Plastic Nippers PNP

    3.Peaks 3.peaks Plastic Nippers PNP

    Staple items. Flat and Earl, two kinds of blade surface shape.  Despite being a standard product, we pursued the shape and structure until the limit.  A sharp blade finished by hand.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Vinyl grip with easy-to-purchase price◦ Coil spring for easy continuous operation◦ Stopper with stick preventive (blade back) material S58C  Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0233 PNP-125 G-S 125 ■  ◎  95 5.0 217-0206 PNP-150G-S 150 ■  ◎  150 5.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Mini-Top Cutters MTC

    3.Peaks 3.peaks Mini-Top Cutters MTC

    Small top cutter.  A blade enters directly directly above. You can cut deep places.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire spring exchange) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) Blade Wide (mm)  Material Spring (g) Plastic mm 217-1296 MTC-3 115 ■  ◎  50 1.5 3.0 217-1302 MTC-5 115 ■  ◎  50 1.5 5.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Micro Nippers MP-125GS | 217-0589

    3.Peaks 3.peaks Micro Nippers MP-125GS | 217-0589

    Small head and blade angle 22 ° makes it easy to enter a narrow place.  Nippa series only blade angle 22 °. It has a total length of 125 mm, and it corresponds to a detailed and intricate work.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 22 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0589 MP-125 G-S 125 ■  ◎  65 2.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • 3.peaks Cable Cutters KC

    3.Peaks 3.peaks Cable Cutters KC

    Cable (IV) wire 60 mm² can be cut.  With a sharp blade, cut the cable wire. It's a beautiful cut.  Only for copper wire cutting.◦ Vinyl grip with easy-to-purchase price material S58C Hardness (HRC) 50 ~ 55 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) IV㎟ Copper Wire 217-1375 KC-22 160 ■  - 170 22.0 9.2 217-1384 KC-60 235 ■  - 365 60 (¢13.6) 13.6 ※ Grip: ■ = Vinyl

  • 3.peaks Bent Long-Nose Pliers (RP-150BG)

    3.Peaks 3.peaks Bent Long-Nose Pliers (RP-150BG)

    Tip angle 45 °. Function to cut · With a type with a type.  It is what the bent form of a standard shape radio pliers.◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 45 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Copper Wire 217-1490 RP-150 BG 150 ■  - 135 1.5 2.6 ※ Grip: ■ = Vinyl

  • 3.peaks Angle-Plastic Nippers AP

    3.Peaks 3.peaks Angle-Plastic Nippers AP

    Blade angle 37 °. The blade enters from an oblique direction.  Blade angle 37 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With a stopper for preventing stiffness ◦ With too much prevention pin included material Vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0561 AP-125 G-S 125 ■  ◎  105 217-0570 AP-150 G-S 150 ■  ◎  155 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3.PEAKS] Stainless-Steel Bent-Flat Nose Pliers SP-35 | 217-1205

    3.Peaks 3.peaks Stainless-Steel Bent-Flat Nose Pliers SP-35

    Type angle 45 °. Pick up / pinch / line up  The tip is thicker than the long first song radio pliers.  There is no cutting ability. No tip nicks.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 48 to 53 (main unit) Blade angle 45 ° Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1205 SP-35 150 ●  □  55 ※ grip: ● = elastomer □ = plastic spring

  • [3.PEAKS] Round Nose Pliers SP-37 | 217-1542

    3.Peaks 3.peaks Round Nose Pliers SP-37

    Rounding / Making a wheel / Pinch  A thinner tip than the round nose pliers (SM - 08).  There is no cutting ability. No tip nicks.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 48 to 53 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1542 SP-37 140 ●  □  50 ※ grip: ● = elastomer □ = plastic spring

  • [3.PEAKS] Long-Nose Pliers

    3.Peaks 3.peaks Long-Nose Pliers

    JIS standard staple products.  Despite being a standard product, we pursued the shape and structure until the limit.  A sharp blade finished by hand.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous work with coil spring (※ stated as "S" in product number) / without spring material Chrome vanadium steel JIS JIS B 4631 * Nominal size 150 mm only Hardness (HRC) 54 ~ 62 (blade part) PAT. PAT. - - Blade angle - - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire 217-0039 RP-125G 125 ■  - - 95 1.5 2.6 217-0048 RP-150G 150 ■  - - 135 1.5 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ▲ = Plastic ◎ = Coil Spring

  • [3.PEAKS] Light Long-Nose Pliers

    3.Peaks 3.peaks Light Long-Nose Pliers LR

    Industry's lightest! It is the lightness of shock.  Develop from customer's voice. We succeeded in reducing the weight of our conventional product (RP) to a total weight of about 74% (LR - 150 S) to 83% (LR - 125 S).◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle - - JIS - - PAT. ○ ○ Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) wire copper wire 217-0686 LR-125S 125 ●  □  83 1.5 2.6 217-0695 LR-150S 150 ●  □  100 1.5 2.6 ※ grip: ● = elastomer □ = plastic

  • [3.PEAKS] Cutting Nippers SP-41 | 217-0747

    3.Peaks 3.PEAKS Cutting Nippers SP-41

    To wire rod and plastic cutting.  Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic Copper Wire Wire 217-0747 SP-41 150 ●  □  68 4.0 2.0 1.2 ※ grip: ● = elastomer □ = plastic spring

  • 3.PEAKS Bent-Cutting Nippers SP-32

    3.Peaks 3.PEAKS Bent-Cutting Nippers SP-32

    Blade angle 60 °. You can reverse hand.  Because the blade has a large angle, it is suitable for cutting narrow spots.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 60 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0163 SP-32 130 ●  □  45 1.0 ※ grip: ● = elastomer □ = plastic spring

  • 3.peaks Angle-Cutting Nippers DNP

    3.Peaks 3.peaks Angle-Cutting Nippers DNP-150GH

    Electric / wiring work with this one.  From peeling to splitting, various electric wiring work is done with one piece.  Blade angle 37 °. Put a blade in an oblique direction and cut intricate and deep place.◦ There is a model number with cutting blades for peeling (※ "H" listed in part number) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0525 DNP-125 GH 125 ■  - 105 2.0 217-0534 DNP-150GH 150 ■  - 155 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Wire Cutters WC-165 | 217-0598

    3.Peaks 3.peaks Wire Cutters WC-165

    Only for wire rope cutting.  With a sharp blade, you can cut the wire rope. It's a scarce and beautiful cut edge.◦ With handle lock◦ Vinyl grip with easy-to-purchase price◦ With cutting edge adjustment screw: Corresponding spanner 10 mm material Vanadium steel Hardness (HRC) 60 ~ 65 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire 217-0598 WC-165 165 ■  ○  180 4.0 ※ Grip: ■ = Vinyl ○ = Spring

  • [3PEAKS] Wire Craft Cutting Nippers CR-01 | 217-0330

    3.Peaks 3.peaks Wire Craft Cutting Nippers CR-01

    Dedicated tool developed jointly with modeling artists.  Weight reduction to make it easy for children and women to handle. I stuck with balance and finishing.  Please enjoy the world of wire crafts with crafted pliers with a scored tip that is hard to scratch and craft nippers with safety considerations.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company material Vanadium steel Hardness (HRC) 56 - 64 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Aluminum Copper Wire 217-0330 CR-01 130 ●  □  85 4.0 2.6 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Wire Clamp Cutters WCC

    3.Peaks 3.peaks Wire Clamp Cutters WCC

    Wire rope (3.0 mm) cuttable. Clamp tube crimping function included.  Cut the wire rope with two blades on the left and right and crimp the various clamp pipes (oval sleeve, Dalma tube, Eight tube) with the tip hole.  The cutting performance of the two blades is the same, and if it is used alternately, the consumption of the blade can be reduced.◦ With handle lock◦ Easy to purchase price, easy to grasp vinyl grip (※ WCC - 200, WCC - 250 - 2 H)◦ Fall prevention strap mounting hole available (※ WCC - 250 only)◦ Cutting edge (both ends) with adjustment screw: Corresponding spanner 13 mm material Vanadium steel Hardness (HRC) 60 ~ 65 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) Clamping (mm)  Material Spring (g) Wire mm 217-0604 WCC-200 200 ■  ○  285 1.5 SS.S.0.27~1.0 217-0613 WCC-250 250 ▲  ○  380 3.0 0.27~1.5 ※ Grip: ■ = Vinyl ▲ = Steel ○ = Spring

  • [3PEAKS] Stainless Steel Plastic Nippers SP-43 | 217-0774

    3.Peaks 3.peaks Stainless Steel Plastic Nippers SP-43

    It is exclusively for plastic. Metal wire can not be cut.  Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0774 SP-43 150 ●  □  68 4.0 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Stainless Steel Plastic Nippers LS-02 | 217-0279

    3.Peaks 3.peaks Stainless Steel Plastic Nippers LS-02

    It is exclusively for plastic. Metal wire can not be cut.  The largest plastic nippers in the stainless steel series. Even if it is big, the weight is lighter than the forged product of the same size.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Precision screw stopper with less looseness (※ It is not an adjustment screw)   material Stainless steel Hardness (HRC) 52 ~ 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0279 LS-02 165 ●  □  95 5.0 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Stainless Steel Needle-Flat Nose Pliers SP-34 |  217-1199

    3.Peaks 3.peaks Stainless Steel Needle-Flat Nose Pliers SP-34

    Grasp / pinch / pull / piss in  The tip is thicker than the long stainless steel radio pliers.  There is no cutting ability. No tip nicks.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 48 to 53 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1199 SP-34 150 ●  □  55 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Slim Plastic Nippers SPN

    3.Peaks 3.peaks Slim Plastic Nippers SPN

    With the longest blade of the series, we surely pinch a wide range of materials and cut.  We extended the blade length and narrowed the blade width. It reaches deep into the narrow part.  Blade finished thin and sharp precision machining is outstanding.◦ Easy to enter power, easy to grip◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 7°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-1560 SPN-145S 145 ●  □  80 3.0 217-1579 SPN-165S 165 ●  □  115 5.0 ※ grip: ● = elastomer □ = plastic

  • [3PEAKS] Short-Needle Nose Pliers SM-05 | 217-0437

    3.Peaks 3.peaks Short-Needle Nose Pliers SM-05 | 217-0437

    Bend / grab / pinch / hold  It's a thin gripper part, and I will grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-05: Easy-fitting elastomer resin / Plastic spring (durability about 10 times higher than our company)◦ SNP: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0437 SM-05 115 ●  □  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Round-Nose Pliers SM-08 | 217-0516

    3.Peaks 3.peaks Round-Nose Pliers SM-08 | 217-0516

    Rounding / Making a wheel / Pinch  Because of the conical shape, you can make various sizes of small and small.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-08: Easy-fitting elastomer resin / Plastic spring (durability about 10 times higher than our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0516 SM-08 115 ●  □  60 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Needle-Nose Pliers SM-03 | 217-0419

    3.Peaks 3.peaks Needle-Nose Pliers SM-03 | 217-0419

    Pinch / Pull / Piss  The tip is a long and long jaw section, so grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-03: Easy-to-fit elastomer resin / Plastic spring (durability about 10 times higher than our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0419 SM-03 130 ●  □  60 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Needle-Nose Pliers NNP-130 | 217-0482

    3.Peaks 3.peaks Needle-Nose Pliers NNP-130 | 217-0482

    Pinch / Pull / Piss  The tip is a long and long jaw section, so grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-03: Easy-to-fit elastomer resin / Plastic spring (durability about 10 times higher than our company)◦ NNP: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Replacement) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0482 NNP-130 130 ■  ◎  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Needle Nose Pliers NNP-150G | 217-1515

    3.Peaks 3.peaks Needle Nose Pliers NNP-150G | 217-1515

    Elongated tip shape. No tip nicks.  It is recommended that you do not want to scratch because there is no notch at the tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1515 NNP-150G 150 ■  - 120 ※ Grip: ■ = Vinyl

  • [3PEAKS] Mini-Plastic Nippers SM-02 | 217-0190

    3.Peaks 3.peaks Mini-Plastic Nippers SM-02 | 217-0190

    Plastic nipper series The smallest class.  With sharp sharpness, it demonstrates its power in delicate work.◦ Blade surface shape is flat type only◦ SM-02: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ MPN: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade  Blade angle 18 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0190 SM-02 100 ●  □  55 3.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Mini Flat-Nose Pliers SM-07 | 217-0455

    3.Peaks 3.peaks Mini Flat-Nose Pliers SM-07 | 217-0455

    Grasp / collapse / bend / drag  Tightly grasp the wide tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-07: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0455 SM-07 115 ●  □  65 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Micro-Plastic Nippers MPN-125 | 217-1320

    3.Peaks 3.peaks Micro-Plastic Nippers MPN-125 | 217-1320

    A blade angle of 22 ° makes it easy to enter a narrow place.  Series only blade angle 22 °. It has a total length of 125 mm, and it corresponds to a detailed and intricate work.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Easy-to-purchase vinyl grip / Continuous work is easier coil spring (※ Please inquire for spring exchange)◦ Stainless steel stopper (back of blade) / with opening preventing pin material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 22°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-1320 MPN-125 125 ■  ◎  65 3.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Micro Bent-Long Nose Pliers MR-150B | 217-1366

    3.Peaks 3.peaks Micro Bent-Long Nose Pliers (MR-150B) | 217-1366

    Tip angle 45 °. To the precise work of the deep part.  I bent the tip of the micro-needle pliers to 45 °. With an exquisite weight balance and high precision finished tip, you will surely perform delicate work such as pinching / picking up / sorting.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 45 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Copper Wire 217-1366 MR-150B 150 ■  ◎  85 1.2 2.6 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Light-Plastic Nippers LPN

    3.Peaks 3.peaks Light-Plastic Nippers LPN

    Industry's lightest! It is the lightness of shock.  Develop products based on customer's voice. Compared to the total weight of our conventional products (PNP), we have succeeded in significantly reducing weight from 77% (LPN - 150 S) to 82% (LPN - 125 S).  Cutting capacity and durability are equivalent to those of conventional products.◦ Blade surface shape is flat type only◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material S58C Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0251 LPN-125S 125 ●  □  78 5.0 217-0260 LPN-150S  150 ●  □  115 5.0 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] High-Plastic Nippers HP-125 | 217-0215

    3.Peaks 3.peaks High-Plastic Nippers HP-125

    Durability best in small class. High precision and beautiful cut surface.  Outstanding sharpness and high precision and beautiful cutting surfaces are the smallest plastic nippers.  We reduced the total weight to about 89% of our conventional product (PNP - 125 G - S), reducing the burden.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Elastic elastomer resin grip / handy plastic grip / plastic spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0215 HP-125 125 ●  □  70 5.0 ※ grip: ● = elastomer □ = plastic

  • [3PEAKS] Green End-Cutting Nippers EC-200 | 217-1180

    3.Peaks 3.peaks Green End-Cutting Nippers EC-200

    Cut from directly above. Reverse hand handling possible.  It is a green series of forged products that can be strongly reinforced with a boost structure◦ With handle lock◦ Fall prevention strap installation hole available◦ With edge adjustment screw: Corresponding spanner 7 mm material Vanadium steel Hardness (HRC) 60 ~ 65 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Copper Wire 217-1180 EC-200 200 ▲  ○  265 1.5 4.0 ※ Grip: ▲ = Steel ○ = Spring

  • [3PEAKS] Flat-Nose Pliers FP-150G | 217-1223

    3.Peaks 3.peaks Flat-Nose Pliers FP-150G

    Type with tip. Strongly grasp / bend  It is robust and grasps strongly with a wide tip, and it corresponds to various processes such as wires and sheet metal.  There is no cutting ability. Type with tip.◦ Vinyl grip with easy-to-purchase price material S55C Hardness (HRC) 40 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1223 FP-150G 150 ■  - 125 ※ Grip: ■ = Vinyl

  • [3PEAKS] Edge-Cutting Nippers ENP-115 | 217-0507

    3.Peaks 3.peaks Edge-Cutting Nippers ENP-115

    The blade enters from an oblique direction. Reverse hand handling possible.  Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ ENP: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 42 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0507 ENP-115 115 ■  ◎  50 1.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Dia-Type Vise Grip Pliers DS-130 | 217-0543

    3.Peaks 3.peaks Dia-Type Vise Grip Pliers DS-130

    After grasping the screw head, it has a lock that can be fixed.  We added screw removal function to vise pliers. Grasp the screw with the two gripper parts, fix it with the lock, turn it powerfully.  Because the gripper part opens widely, it can correspond to various screws and pipes.◦ Squatting section: Our original design diamond type. Grab surely with 3 point support◦ Lock: Grasp the handle and grasp the screw and fix it◦ Cut by blade◦ It can be used as a vice plier material Chrome molybdenum steel Hardness (HRC) 42 to 48 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0543 DS-130 130 ▲  ○  140 ※ Grip: ▲ = Steel ○ = Spring

  • [3PEAKS] Daiya-Type Pliers (DS-175/DS-215)

    3.Peaks 3.peaks Daiya-Type Pliers (DS-175/DS-215)

    It turns powerfully with a large size of 215 mm. Also supports truss and nut.  Grasp the screw with a total of 3 gripper parts and turn it powerfully. Although there is no lock function, it can be used easily with one hand.◦ Squatting section: Our original design diamond type. Corresponding to truss screws by changing longitudinal grooves◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand◦ Grip hole for falling prevention strap mounting (※ DS-215TZ only) material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1241 DS-175TZ 175 ●  - 240 217-1250 DS-215TZ 215 ●  - 350 ※ grip: ● = elastomer

  • [3PEAKS] Daiya-Type Pliers (DS-150Z/DS-175Z)

    3.Peaks 3.peaks Daiya-Type Pliers (DS-150Z/DS-175Z)

    Lightly easy to handle screw removal tool. There are big and small.  Grasp the screw with a total of 3 gripper parts and turn it powerfully. Although there is no lock function, it can be used easily with one hand.◦ Squatting section: Our original design diamond type. Grasp screws of various shapes with three points support securely◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0464 DS-150Z 150 ●  - 125 217-0473 DS-175Z 175 ●  - 240 ※ grip: ● = elastomer

  • [3PEAKS] Daiya-Type Pliers (DS-115/DS-150)

    3.Peaks 3.peaks Daiya-Type Pliers (DS-115/DS-150)

    Small design with minimum 115 mm weight 65 g. Corresponds to precision screws and truss screws, narrow spaces.  In order to hold the truss screw firmly, we changed the vertical groove structure of the conventional product "Diamond Screw Thread Pliers (DS-150Z)".  It is a three-point supported gripper which can accommodate various shapes and sizes.◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous spring plastic spring (* DS - 115 TZ only)ESD compliant electrostatic countermeasure grip adopted (surface resistance value 1 × 10 6 Ω to 10 9 Ω / sq.) (* DS - 115 TZ only) material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0862 DS-115TZ 115 ●  □  65 217-1232 DS-150TZ 150 ●  - 125 ※ grip: ● = elastomer □ = plastic spring

Login

Forgot your password?

Don't have an account yet?
Create account