Products
Autonics Autonics photoelectric micro sensor Through-beam type BS5-K1M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-K1R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-K1R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-K2M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-K2M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-K2R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-K2R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-L1M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-L1R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-L1R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-L2M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.10
Autonics Autonics photoelectric micro sensor Through-beam type BS5-L2M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-L2R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-L2R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-R1M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.68
Autonics Autonics photoelectric micro sensor Through-beam type BS5-R1R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-R1R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-R2M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-R2M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-R2R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-R2R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.39
Autonics Autonics photoelectric micro sensor Through-beam type BS5-T1M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-T1R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-T1R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-T1R-P-F
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Hysteresis(distance) ≤0.05mm Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$8.89
Autonics Autonics photoelectric micro sensor Through-beam type BS5-T2M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-T2R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-T2R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor Through-beam type BS5-TA1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-V1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Through-beam type BS5-Y2M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.10
Autonics Autonics photoelectric micro sensor Through-beam type BS5-Y2R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output PNP open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.34
Autonics Autonics photoelectric micro sensor, Through-beam type BS3-K1R-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output PNP open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.94
Autonics Autonics photoelectric micro sensor, Through-beam type BS3-F1M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output PNP open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.97
Autonics Autonics photoelectric micro sensor, Through-beam type BS3-K1M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output PNP open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.97
Autonics Autonics photoelectric micro sensor, Through-beam type BS3-K1R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output NPN open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.94
Autonics Autonics photoelectric micro sensor, Through-beam type BS3-L1M-P
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output PNP open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.97
Autonics Autonics photoelectric micro sensor, Through-beam type BS3-L1R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output NPN open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.94
Autonics Autonics photoelectric micro sensor, Through-beam type, BS5-L1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.36
Autonics Autonics photoelectric micro sensor, Through-beam type, BS5-T1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.36
Autonics Autonics photoelectric micro sensorThrough-beam type BS4-Y2R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲,Dark ON: Max. 80㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(Built-in) Indicator Operation indicator (red LED) Weight ≈ 2.4 g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output NPN open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC~ 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$10.10
Autonics Autonics Photoelectric Sensor, Photoelectric Type BA2M-DDT
Sensing type Diffuse reflective type Sensing distance 2m Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 15mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Control output NPN open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -25 to 70℃ Protection structure IP64 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at sensing distance Material Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Indicator: Polycarbonate, Adjuster: IXEF Accessories Adjuster driver Weight Approx. 50g
$32.51
Autonics Autonics Photoelectric Sensor, Photoelectric Type BA2M-DDT-P
Sensing type Diffuse reflective type Sensing distance 2m Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 15mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Control output PNP open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -25 to 70℃ Protection structure IP64 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at sensing distance Material Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Indicator: Polycarbonate, Adjuster: IXEF Accessories Adjuster driver Weight Approx. 50g
$36.49
Autonics Autonics Photoelectric Sensor, Photoelectric Type BA2M-DDTD
Sensing type Diffuse reflective type Sensing distance 2m Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 15mA Sensitivity adjustment Sensitivity adjuster Operation mode Dark ON Control output NPN open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -25 to 70℃ Protection structure IP64 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at sensing distance Material Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Indicator: Polycarbonate, Adjuster: IXEF Accessories Adjuster driver Weight Approx. 50g
$36.49
Autonics Autonics Photoelectric Sensor, Photoelectric Type BA2M-DDTD-P
Sensing type Diffuse reflective type Sensing distance 2m Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 15mA Sensitivity adjustment Sensitivity adjuster Operation mode Dark ON Control output PNP open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -25 to 70℃ Protection structure IP64 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at sensing distance Material Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Indicator: Polycarbonate, Adjuster: IXEF Accessories Adjuster driver Weight Approx. 50g
$36.49
Autonics Autonics Photoelectric Sensor, Photoelectric Type BC15-LDT-C
Sensing type Convergent reflective type Sensing distance 15mm Sensing target Color(opaque,translucent Material) Light source Full Color LED(red, green,blue) Response time 500㎲ Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment 3-level Operation mode color only,color + intensity Control output NPN open collector Timer function Timer Function Connection type Connector type(M12) Environment_Ambient illumination Incandescent lamp: Max. 3,000lx Environment_Ambient temperature -10 to 55℃, storage: -25 to 75℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance(may vary by sensing mode or sensitivity) Spot size 1.24×6.7mm(rectangular) Sensing mode C(color only) mode, C+I(color + intensity) mode Output mode Color match output, color mismatch output External input External SET cable input Material Case: polycarbonate, Sensing part: acrylic, Bracket: stainless steel 304 , Bolt: carbon steel Accessories Bracket, Fixing bolts: 2 , Adjustment screwdriver: 1 Weight Approx. 80g(approx. 14g)
$150.51
Autonics Autonics Photoelectric Sensor, Photoelectric Type BC15-LDT-C-P
Sensing type Convergent reflective type Sensing distance 15mm Sensing target Color(opaque,translucent Material) Light source Full Color LED(red, green,blue) Response time 500㎲ Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment 3-level Operation mode color only,color + intensity Control output PNP open collector Timer function Timer Function Connection type Connector type(M12) Environment_Ambient illumination Incandescent lamp: Max. 3,000lx Environment_Ambient temperature -10 to 55℃, storage: -25 to 75℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance(may vary by sensing mode or sensitivity) Spot size 1.24×6.7mm(rectangular) Sensing mode C(color only) mode, C+I(color + intensity) mode Output mode Color match output, color mismatch output External input External SET cable input Material Case: polycarbonate, Sensing part: acrylic, Bracket: stainless steel 304 , Bolt: carbon steel Accessories Bracket, Fixing bolts: 2 , Adjustment screwdriver: 1 Weight Approx. 80g(approx. 14g)
$150.51
Autonics Autonics Photoelectric Sensor, Photoelectric Type BEN10M-TFR
Sensing type Through-beam type Sensing distance 10m Sensing target Opaque material of min. Ø16mm Light source Infrared LED(850nm) Response time Max. 20ms Power voltage 24-240VAC~ ±10% 50/60Hz, 24-240VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 4VA Operation mode Light ON/Dark ON(set by switch) Control output Relay Connection type Cable type(Ø5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -20 to 65℃, storage: -25 to 70℃ Protection structure IP50 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case, Case cover: Heat resistant Acrylonitrile butadiene styrene,Sensing part: Polycarbonate(with polarizing filter: polymethyl methacrylate),Bracket: Steel Plate cold commercial, Bolt: steel chromium molybdenum,Nut: steel chromium molybden Accessories_Common Adjuster driver, Fixing bracket, Bolts, Nuts Weight Approx. 354g
$38.47
