Description
SMC ISE20-P-M5 — ISE20 series high precision digital pressure switch for positive pressure, with a three-screen display and M5 port. Response time is 1.5 ms or less and the unit is IO-Link compatible.
Specification — ISE20-P-M5
| Series |
ISE20 (digital pressure switch, positive pressure) |
| Port |
M5, integrated R1/8 fitting with bottom wiring entry |
| Display |
3-screen |
| Response time |
1.5 ms or less |
| Communication |
IO-Link compatible |
| Product weight |
22 g |
Three screens, and why
A single-display switch shows either the measured value or the set point, never both, so adjusting one means losing sight of the other. The three-screen layout keeps the reading, the set point and the output state visible at once, and settings can be changed while watching the live value — which is how a threshold gets set correctly the first time.
Setting and response
Setup runs in three steps with direct screen switching, so the switch can be configured at the machine rather than from the manual. At 1.5 ms response it keeps up with fast cycling where a mechanical switch would lag behind the event it is meant to catch.
IO-Link
Over IO-Link the switch reports its measured value and its own status to the controller, not just an on/off signal. Set points can be written from the PLC, so a line changeover does not require someone to walk round adjusting switches.
Ordering
Order by the full code ISE20-P-M5. Pressure range, port and output are all in the code. Low pressure range and low differential pressure types are available in the 20A series, along with an M12 connector version.
Supply from Korea
Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.
