Description
SMC ISE76G-F02-L2-S — ISE70G series high precision digital pressure switch for general fluids, G1/4 port, with a three-screen display and IO-Link. The G suffix marks the wetted parts specification that allows liquids as well as gases.
Specification — ISE76G-F02-L2-S
| Series |
ISE70G/75G/76G/77G (digital pressure switch, general fluid) |
| Port |
G 1/4 (F02) |
| Fluids |
Liquids and gases that do not corrode the wetted parts |
| Display |
3-screen, rotatable 336° after installation |
| Communication |
IO-Link |
| Product weight |
323 g |
General fluid versus air only
The plain ISE70/71 is rated for air and non-corrosive, non-flammable gases. The G versions change the wetted parts so the switch can be used on liquids — coolant, water, oil — provided they do not attack the material. That is the distinction to check before substituting one for the other: the electronics are the same, the process connection is not.
The rotating display
A pressure switch usually ends up wherever the pipework puts it, which is rarely facing the operator. This display rotates 336° after the switch is installed, so the reading can be turned to face wherever it will be read from — without re-plumbing the connection to suit the display.
Setting while measuring
The three-screen layout keeps the measured value, the set point and the output state visible at once, so a threshold is set while watching the live reading rather than from memory. Over IO-Link the switch also reports its value and status to the controller, and set points can be written from the PLC — useful when a line changeover would otherwise mean walking round adjusting switches by hand.
Ordering
Order by the full code ISE76G-F02-L2-S. Pressure range, port, output and display options are all in the code. The ISE79S covers ranges up to 50 MPa.
Supply from Korea
Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.
