Description
SMC IS10-01-6 — IS10 series pressure switch with R1/8 port. Mechanical switch that outputs a contact signal when line pressure reaches the set point, and mounts directly onto a modular F.R.L. unit. The -6 suffix specifies the lead wire type.
Specification — IS10-01-6
| Series |
IS10 (pressure switch) |
| Port size |
R 1/8 |
| Electrical entry |
Lead wire (-6) |
| Mounting |
Direct, or connected to modular F.R.L. units |
| Service life |
5 million operations |
| Fluid |
Air |
| Product weight |
62 g |
Features
- 16% lighter and 11% smaller than the earlier IS1000 series
- Rated for 5 million operations
- Connects into a modular F.R.L. set, so no separate bracket or tee is needed
What it is for
A pressure switch tells the control system that air is actually present before a cycle starts. Without one, a machine can begin a sequence on low or lost pressure and stall mid-stroke with a part clamped. Mounting it on the F.R.L. set puts the sensing point right after air preparation, where the reading matters.
IS10-01 or IS10-01-6
Same switch and same port; the suffix changes the electrical connection. Pick the one that matches the existing wiring — a conduit-entry unit will not drop into a lead-wire installation without rework.
Ordering
Order by the full code IS10-01-6. For a digital readout instead of a mechanical contact, the ISE series is the equivalent. Send the code and quantity and we will quote it.
Supply from Korea
Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.
