Description
SMC SY5200-5U1-NA — SY5000 series 5-port solenoid valve, plug-in base mounted type. The plug-in construction carries the wiring through the manifold base, so a station is replaced without touching a single wire.
Specification — SY5200-5U1-NA
| Series |
SY5000 (5-port solenoid valve) |
| Type |
Plug-in, base mounted |
| Power consumption |
0.1 W (power saving) / 0.35 W (standard) |
| Service life |
200 million cycles (metal seal) / 70 million (elastomer seal) |
| Base options |
Plug-in metal base IP40, connector base IP67 |
| Manifold bases |
SS5Y3, SS5Y5, SS5Y7 |
| Product weight |
92 g |
Why plug-in
On a non plug-in manifold each valve is wired individually, so replacing one means opening the loom and re-terminating. A plug-in valve makes its electrical connection through the base, so the station is unbolted and swapped in a minute — the difference between a five-minute stop and a shift's downtime on a line with thirty valves.
Service life
200 million cycles with a metal seal is an order of magnitude beyond typical requirements, and matters on high-speed indexing where a valve fires several times a second. The elastomer seal version reaches 70 million and seals tighter at rest — pick by whether cycle count or leakage is the constraint.
Ordering
Order by the full code SY5200-5U1-NA. Coil voltage, electrical entry and seal type are all in the suffix. Plug-in valves need a matching base — tell us the station count and IP rating and we will quote the manifold with the valves. The SY3200 covers the smaller body size.
Supply from Korea
Genuine SMC, stocked and shipped from Gyeonggi-do, Korea, with export packing and commercial documents prepared as standard.
