Products

KYORITSU CHEMICAL-CHECK Lab Simplified Water Quality Test Tool ,250 (Chemical Oxygen Requirement) 50 Times　WAK-COD(H)-2 Spec Measurement item : COD 250 (chemical oxygen requirement) Number of measurements: 50 simplified water quality testing equipment It is a successor for 6 -8675 -40. Package size：165×110×65 mm　140 g

Read more less

KYORITSU Simplified Water Quality Test Tool ,Total nitrogen (Inorganic) 40 Times　WAK-TN-i-2 Spec Measurement item : total nitrogen (Inorganic) Number of measurements: 40 simplified water quality testing equipment It is a successor for 6 -8675 -77. Package size：170×115×70 mm　240 g

Read more less

Electric equipment crimping tool FK3 For non-insulated terminals and P.B sleeves ● One tool for crimping non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping.• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0132 FK3 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER  Side-Cutting Pliers 2508  Specifications Product Code. Model No. weight size1 Remark 215-0558 2508 350g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Adjustable Wrenches M • 1.5 times higher strength than JIS powerful class wrenches (M200 to 375).LOBSTER original adjustable angle wrench.• LOBSTER has been making adjustable wrenches for 80 years. They are manufactured under strict quality control standards. Their strength is higher than JIS powerful class wrenches.• The body and parts undergo proprietary machining on purpose-specific machinery in a streamlined production process from forging to finishing that renders uniform precision and excellent durability.Use / Application• Tightening and loosening nuts and boltsSpecifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension Torque strength 215-5021 M150 120g 160mm 6.0mm 10.0mm 0～20mm M12 184.9 215-5030 M200 250g 206mm 7.5mm 13.0mm 0～24mm M16 411.9 215-5049 M250 440g 258mm 9.0mm 15.5mm 0～29mm M18 691.4 215-5058 M300 700g 304mm 10.0mm 18.0mm 0～34mm M22 1176.8 215-5067 M375 1350g 385mm 14.0mm 23.0mm 0～44mm M27 2206.5 215-5076 M450 1900g 465mm 13.5mm 24.0mm 0～53mm M33 3079.1 215-5085 M600 3400g 615mm 16.5mm 30.0mm 0～67mm M42 3853.8 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useAdjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Adjustable Wrenches With Insulated Grip S36  • Despite the 250-mm body, the jaws open 36-mm wide, which is a standard opening for a 300-mm body• Test voltage: 20 kV for 1 minute (Operating temperature range: -20 ° C to 70 ° C)Specifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension Remark 215-6127 S36 500g 260mm 9.0mm 15.5mm 0～36mm M24 with insulation grip IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useInsulation is provided for the molded cover (grip) only. When using this tool on live wires, do not touch any part other than the molded cover.Be sure to wear the insulation protection gear (rubber gloves and rubber boots).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.• Despite the 250-mm body, the jaws open 36-mm wide, which is a standard opening for a 300-mm body• Test voltage: 20 kV for 1 minute (Operating temperature range: -20 ° C to 70 ° C)SpecificationsIMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useInsulation is provided for the molded cover (grip) only. When using this tool on live wires, do not touch any part other than the molded cover.Be sure to wear the insulation protection gear (rubber gloves and rubber boots).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Angled tip long-nose pliers ROPROSS RP150B  • These angled tip long-nose pliers are useful for work in cramped spaces. LOBTEX drastically changed the tip angle to point sideways.• Thanks to the direction and angle (30 °) of the tip, ROPROSS can easily grip the target objects even in the cramped spaces where conventional pliers can not be opened laterally.Specifications Product Code. Model No. weight size1 size2 size3 Remark 215-4518 RP150B 120g 157mm 10mm 40.5mm Cutting capacity/①Iron wire:φ1.5 ②Copper wire:φ2.6 ※① of a table is IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm directions of cut chips.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Attachment Nut Rivet Setter @ N10d  No need to adjust stroke!Easy and Convenient!Need a rechargeable drill driver (14.4V with torque adjustable function).Use / Application ★ How to operate Attachment Nut Rivet Setter @ N10d ① Lobster Blind Nut Rivet (M5 Steel) ② Make a prepared hole which is 0.1mm larger than dia. of the nut rivet. ③ Check if the nut rivet can insert to the prepared hole. ④ Equip @ N10d into the drill driver. ⑤ Make sure @ N10d set in place. ⑥ Adjust torque of the drill driver. (*One)⑦ Make sure that the mandrel is equipped.Then, spray lubricant oil on it. (* 2) (* 3) ⑧ Set the rivet nut into the mandrel. ⑨ Insert the rivet nut into the prepared hole. ⑩ Hold the grip firmly and rotate the drill driver clockwise pushing a little to the object. ⑪ After fastened, rotate the drill driver in anti-clockwise direction and remove the tool from thr nut rivet. ⑫ Finised.(* 1) Refer to "Required torque" in the instruction manual.After adjusting the torque, conduct a riveting test.(* 2) Select the proper size of the mandrel. There are 3 sizes (M4, M5, M6) of the mandrel packed into the package.(* 3) The lubricant oil (5ml) comes with the package.Specifications Product Code. Model No. weight size1 size2 size3 size4 size5 size6 Use range Remark 215-4846 @N10d 430g 175mm 55mm 49mm 26mm 17mm 8mm M4,M5,M6 *Can not use for stainless nut rivet 14.4V Drill driver IMPORTANT SAFETY INSTRUCTIONS· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.Consider carefully the work condition. By continuous use, the drill driver is very hot.Always cool down the tool at any time.· If using the drill drive other than 14.4V, check if it can work or not before use.· The tool is made for the drill driver. Do not use the tool with the impact driver and the pneumatic one.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Attachment Riveter @ R03i  Instantly turn your impact driver into riveter!· Need an electric or rechargeable Impact Driver which has more than 80N · m of Max. fastening torque.· For Car repair, DIY, etc.· Less fatigue than using Hand RiveterSpecifications Product Code. Model No. weight size1 size2 size3 size4 size5 Use range Usage jaws 215-0804 @R03I 450g 166mm 55mm 36.5mm 26mm 6.35mm It can use to all the quality-of-the-material φ4.8mm. "M" IMPORTANT SAFETY INSTRUCTIONS· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Cable Stripper • This tool can easily strip a cable without damage, by simply turning the hook on the cable.• Special resin grip is ergonomically shaped to fit the hand, and prevent fatigue during work.• Precision ground cutter blade is made of special hard steel wire that maintains cutting performance for a long time.A spare cutter blade is included.Use / Application• Stripping cable sheathSpecifications  Product Code. Model No. weight size1 Use range 215-0318 CS16 75g 128mm φ4～16mm 215-0327 CS28 75g 132mm φ8～28mm 215-0336 CS35 85g 153mm φ28～35mm 215-0345 CS50 90g 166mm φ35～50mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Combination Pliers LOBSTER pliers feature a proud history that dates back to 1928 as the first pliers made in Japan. The excellent quality is highly rated and trusted.Use / Application• Tightening and removing nuts and bolts• Cutting, twisting, bending and tensioning wires• Bending thin steel plates• Gripping objects that can not gripped by handSpecifications  Product Code. Model No. weight size1 size2 size3 215-7463 P200 250g 203mm 11mm 46.0mm 215-7472 P250 360g 248mm 12mm 58.0mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not infect target objects unstably. Otherwise, the tool may slip, causing your fingers to be caught in the tool.During work, wear protective goggles.Do not use this tool as a substitute for a hammer.Do not apply impact to this tool by hitting it with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Clippers APK28  Lightweight clippers with a maximum cutting diameter of 12 mm (for soft material), 5 mm (for soft steel) or 3 mm (for hard steel)• The handle and clip plate are made of anodized aluminum alloy.• The grip is made of luminous material that stores fluorescent or sunlight and glows in the dark. A reflective sticker is attached to the handle.• The luminous grip is soft and gently fits the hand.Use / Application• For cutting wires, nails, fences, stainless steel strands, etc.• For disassembling scaffolding and binding materials at construction sites• For pruning, landscape gardening, etc.• For cutting soft materials (wire, copper pipe, plastic, etc.) in electrical work, disassembly work, etc.Specifications Product Code. Model No. (Product) weight size1 size2 215-0716 APK28 260g 280mm 46mm  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Cutter APC20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No.  weight size1 size2 Remark 215-0691 APC20A 160g 215mm 38mm Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 2.0 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less than   IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Cutter with Stainless Steel Cutting Blade APS20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Remark 215-0691 APS20A 160g 215mm 38mm Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 1.6 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less   IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum nippers APN20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Retail/User prices Remark 215-0682 APN20A 170g 215mm 38mm open price Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 2.0 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less than 980N IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Crimping Side-Cutting Pliers CSC225  Specifications Product Code. Model No. weight size1 Remark 215-0576 CSC225 365g 365mm Cutting capacity ①Iron wire:φ3.6 ②Copper wire:φ4.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK15A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • Smooth handle operation• Forming check mechanism incorporated into the body. Smart collar design.• Handle is narrower than conventional models. (Approx. 20 mm when opened.) Handle is easily operated with one hand while holding the terminal with the other.Use / Application• For non-insulated terminals for copper wire.For non-insulated sleeves (P-B) for copper wire.Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-0026 AK15A 400g 256mm 82mm 1.25、2、5.5、8㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK19A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • Smooth handle operation• Forming check mechanism incorporated into the body. Smart collar design.• Handle is narrower than conventional models. (Approx. 20 mm when opened.) Handle is easily operated with one hand while holding the terminal with the other.Use / Application• For non-insulated terminals for copper wire.• For non-insulated sleeves (P-B) for copper wireSpecifications Product Code. Model No. (Product) weight size1 size2 Use range 215-0035 AK19A 430g 274mm 82mm 2、5.5、8、14㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK22A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.•For non-insulated sleeves (P-B) for copper wire.Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-4527 AK22A 675g 336mm 82mm 5.5、8、14、22㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK25A • AK28A For closed end insulated connectors • Smooth handle operation• Forming check mechanism incorporated in the body. Smart collar design.• Handle is narrower than conventional models. (Approx. 200 mm when opened.) Handle is easily operated with one hand while holding the terminal with the other.Use / ApplicationFor closed end insulated connectorsSpecifications Product Code. Model No.  weight size1 size2 Use range 215-0053 AK25A 415g 266mm 82mm CE1、2、5 215-4484 AK28A 425g 269mm 82mm CE1、2、5、8 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※  Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK38A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.For non-insulated sleeves (P-B) for copper wire.Specifications  Product Code. Model No. weight size1 size2 Use range 215-0080 AK38A 670g 335mm 82mm 14、22、38㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER CUTTING NIPPERS 2716G Specifications Product Code. Model No.  weight size1 Remark 215-5447 2716G 144g 150mm Cutthing capacity/Copper wire:φ2.6 ※① of a table is full length. ! IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Cutting Nippers NN-125 • Holes (0.8 mm, 1.6 mm) are provided in the blades for stripping work.• Enables easy stripping of vinyl cable, rubber cable in electric work, without damage to core wires.Specifications Product Code. Model No.  weight size1 size2 215-5766 NN125 90g 130mm 23.0mm ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm directions of cut chips.During work, wear protective goggles.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER DIAGONAL CUTTING PLIERS 2706  Specifications Product Code Model No. (Product) weight size1 Remark 215-0512 2706 150g 150mm Cutthing capacity ①Iron wire:φ1.8 ②Copper wire:φ2.6 ※① of a table is full length.  ! IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

Diagonal cutting pliers KN125 • The cutting blade features high hardness, cutting capacity and durability. Widely used in electric works and other fields.• For cutting copper and steel wiresSpecifications Product Code Model No.  weight size1 size2 215-5775 KN125 80g 128mm 16.6mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK1 For open barrel terminals, for non-insulated terminals and sleeves ● One tool for crimping open barrel terminals / non-insulated terminals, and bolt / cable cutting and stripping• Wire cutter• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0114 FK1 275g 235mm ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK2 Insulated crimp terminals, non-insulated terminals and P.B sleeves ● One tool for crimping insulated crimp terminals / non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping• Wire cutterInsulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0123 FK2 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring. CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK4 For insulated crimp terminals ● One tool for crimping insulated crimp terminals and bolt / cable cutting and stripping• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0141 FK4 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK5 For open barrel terminals ● One tool for crimping open barrel terminal and bolt / cable cutting and stripping• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0150 FK5 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※Specifications may be changed for improvement without prior notice..

Read more less

Electric equipment crimping tool FK6 For insulated crimp terminals, open barrel terminals ● One tool for crimping insulated crimp terminals and open barrel terminals, and bolt / cable cutting and stripping• Wire cutter• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No.  weight size1 215-0169 FK6 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip  External Retaining Ring Pliers (Straight Nose) Non-slip!Improved work efficiency!· Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. weight size1 215-5368 OS125 90g 145mm 215-0813 OS175 170g 174mm 215-5401 OS230 270g 242mm IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip External Retaining Ring Pliers  (Bent Nose) Non-slip!Improved work efficiency!Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. (Product) weight size1 215-5377 OB125 90g  137mm 215-0822 OB175 170g 163mm 215-5410 OB230 270g 230mm   IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip Internal Retaining Ring Pliers  (Bent Nose) Non-slip!Improved work efficiency!Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. (Product) weight size1 215-5395 CB125 90g 142mm 215-0840 CB175 150g 168mm 215-5438 CB230 240g 228mm   IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip Internal Retaining Ring Pliers (Straight Nose) Non-slip!Improved work efficiency!Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. weight size1 215-5386 CS125 90g 152mm 215-0831 CS175 150g 178mm 215-5429 CS230 240g 240mm  IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Nut Rivet Setter HN010 It is powerful hand nutter which can be used for the blind-nut with M10 size.Use / Application· 8 M ~ 10 M of blind-nuts,Specifications Product Code. Model No.  weight size1 size2 size3 size4 Use range 215-0798 HN010 1960ｇ 455mm 35mm 60mm 30mm M5、M6、M8、M10 IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Nut Rivet Setter HND005  · Aluminum diecast frame and hardened chrome-vanadium steel handleBalanced spinning mechanism· Suitable for downward, horizontal or overhead installation of nut rivets· Comes with four nosepieces, sizes # 4, # 6, # 8, and # 10, or M3, M4, M5 and M6· A complete kit with assorted rivets is also available: HND-105Specifications Product Code. Model No. weight size1 size2 size3 size4 Use range Remark 215-0789 HND005 650ｇ 270mm 131mm 33mm 22mm Steel（M3,M4,M5）・Aluminum（M4,M5,M6）・Stainless steel（M3,M4） Heavy Duty IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR002A  · It is a hand Riveter with general configuration.• Aluminum die cast frame and drop-forged chrome-vanadium steel lever handle• Wide, self-opening spring for regriping• Automatic mandrel ejection• Comes with four nosepieces to set rivets up to 3/16 "• International designSpecifications Product Code. Model No. weight size1 Set details Use range Usage jaws 215-0734 HR002A 550g 265mm ※Cannot be used with φ4.8mm stainless steel blind rivets. φ2.4・3.2・4.0・4.8mm Small IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR002D  · The easy-to-use hand Riveter· Overcomes drawbacks of conventional hand riveters by holding the rivet firmly regardless of tool position.· Special palm and hand grip for ease and comfort.· Comes with four nosepieces to set rivets up to 4.8mm (3/16 ").Specifications Product Code Model No. (Product) weight size1 size2 size3 size4 Use range Usage jaws Remark 215-0725 HR002D 500g 273mm 83mm 20mm 20mm φ2.4・3.2・4.0・4.8mm Small ※Cannot be used with φ4.8mm stainless steel blind rivets. IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR003B  · Longer handles and gear mechanism exert greater rivet break power.* With optional parts (sold separately), HR-003B can set S-bolt.Specifications Product Code. Model No. weight size1 size2 size3 size4 Use range Usage jaws Remark 215-0761 HR003B 2.000g 760mm 95mm 41mm 25mm φ4.8・6.4mm Large Heavy Duty IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR2050H  Longer handles and gear mechanism exert greater rivet break power· Φ4.8,6.4mm blind rivets in all materials can be used.* With the included S-bolt nosepiece, S-bolt can be set.Specifications Product Code. Model No. weight size1 size2 size3 size4 Usage jaws Remark 215-0770 HR2050H 1.750g 535mm 37mm 33mm 24mm Large ･Heavy Duty ･Use Range:φ4.8,6.4mm ※Can be used with φ2.4,3.2,4.0mm blind rivets if optional parts(separately sold)are attached  IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR300 · It is an economic home-use hand.Use / ApplicationUse range: NSA (Rivet: Alminium, Mandrel: steel) 2.4, 3.2, 4.0, 4.8 mm  NA (Rivet: Alminium, Mandrel: Alminium)? 2.4, 3.2, 4.0, 4.8 mm  NS (Rivet: Steel, Mandrel: Steel) φ2.4, 3.2mmSpecifications Product Code. Model No. weight size1 size2 size3 size4 Remark 215-0734 HR300 600g 260mm 85mm 40mm 18mm Use range:NSA φ2.4,3.2,4.0,4.8mm IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Handheld Diamond Dresser SHD001  · Handheld dresser used for dressing, edge making and truing of grinding wheels of double-sided grinders· Dressing is enabled with little force.· Since the hand dresser emits little sparks and noise, the work environment can be improved.Use / Application* How to use the toolWith the type of parallel to the grinding wheel surface, slide it laterally.(Do not press the tip against the grinding wheel. Doing so will cause the tip and grinding wheel to wear down early, and also a hazard. 38 or larger in width) or a grinding wheel with high grain density accelerates wear in the tip.Specifications Product Code. Model No. weight size1 size2 size3 size4 size5 215-0363 SHD001 245g 250mm 34mm 22.0mm 7.0mm 4.5mm IMPORTANT SAFETY INSTRUCTIONS◆ Precaution for useBefore using this product, be sure to read the instruction manual included with the product, instructions indicated on the case and the operation manual for the machine being used, to understand the contents thoroughly.During work, be sure to wear protective gear (dust-proof goggles, safety shoes and protective caps).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Heavy Duty Crimping Tool AK60 / AK100 • Easily crimps various sizes by simply turning rotary female dies.Use / Application• Equipped with easy-to-use adjusting dial for matching force to user's strengthSpecifications   Product Code. Model No. weight size1 Use range 215-0187 AK60 3100g 710mm 14、22、38、60㎜2 215-0196 AK100 3500g 695mm 22、38、60、80、100㎜2 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hybrid Adjustable Wrench, Cushion Grip UM • A warm look has been added to our hybrid adjustable angle wrenches. (6 colors 4 sizes)Gentle touch has a soothing effect.• Useful for worksite tool managementUse / Application• Tightening and loosening nuts and boltsSpecifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension 215-0451 UM24 90g 150mm 5mm 9.5mm 0～24mm M16 215-0460 UM30 170g 200mm 6mm 12.0mm 0～30mm M20 215-0479 UM36 300g 245mm 7mm 14.0mm 0～36mm M24 215-0488 UM46 580g 300mm 8mm 16.5mm 0～46mm M30 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Adjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hybrid Adjustable Wrenches UM LOBSTER originated adjustable angle wrench, featuring "thin" and "lightweight" designAdjustable angle wrench featuring "Thin", "Wide" and "Lightweight" design◎ All of LOBTEX adjustable angle wrenches are made in Japan, and can be reliably and safely used.Use / ApplicationApplication: Tightening and loosening nuts and bolts● Thin: The thin body can smoothly fit the palm, so the tool can be safely used even in cramped spaces.    Upper: Hybrid adjustable wrench (UM36)Lower: Powerful adjustable wrench (M300) The hybrid adjustable wrench is thinner, when compared with the same jaw opening width. ● Wide:   The jaw opening is wider than that of conventional adjustable wrenches.Left: Conventional powerful adjustable wrench (M300)Right: Hybrid adjustable wrench (UM36)  ● Lightweight: Approx. 60% weight reduction, in comparison with our powerful adjustable wrenchesOverall size comparison between hybrid adjustable wrench (UM36) and conventional adjustable wrench (M300) Despite the same jaw opening width, the hybrid adjustable wrench is compact. However, it provides sufficient torque, causing no problems in use.  * The hybrid adjustable wrench provides higher rigidity than the safety standard prescribed in JIS (Japan Industrial Standard), thus ensuring safety during use.  Specifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension 215-0415 UM24 90g 150mm 5mm 9.5mm 0～24mm M16 215-0424 UM30 170g 200mm 6mm 12.0mm 0～30mm M20 215-0433 UM36 290g 245mm 7mm 14.0mm 0～36mm M24 215-0442 UM46 560g 300mm 8mm 16.5mm 0～46mm M30 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useAdjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hybrid Water Pump pliers UU4150  • The jaw opening varies in 6 steps at irregular pitches that accommodate pipe standards. The handle opening stays the same for the most part, regardless of the target workpiece size.• Owing to the 3-point support structure and deformed tooth profile, this tool can securely work with the grip.• Safety design (with stopper) to prevent hands being caught in the handle.• Applicable to nuts up to 41 mm in width across flats (M27), up to 50 mm pipe / round rod, and 3/8 stud bolts.• Lightweight design: Only 280 g (approx. 30 g weight reduction in comparison with our conventional models)• New profile that does not cause damage to the head of nuts.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 size4 size5 Bolt, nut maximum dimension 215-0664 UU4150 280g 226mm 9.0mm 43mm 52mm 50mm M27 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic Crimping Tool AKH150S • Terminals can be held and crimped quickly in 1 or 2 squeezes of the handle. Return speed is only 3 seconds.Use / Application• Equipped with fast feed mechanismSpecifications  Product Code. Model No. weight size1 Use range 215-0211 AKH-150S(14-150SQ), 4300g 500mm 14、22、38、60、70、80、100、150㎜2 215-0220  Dies  AKH-150(14SQ), 215-0239  Dies  AKH-150(22SQ), 215-0248  Dies  AKH-150(38/60/70SQ), 215-0257  Dies  AKH-150(80/100/150SQ), IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic Crimping Tool AKH60N • Lightweight compact type (Overall length: 360 mm, Weight: 2 kg)• Equipped with auxiliary lever, enabling easy and quick crimping with one handUse / Application• Quick crimping, applicable to up to 60 sq.Specifications Product Code. Model No. weight size1 Use range 215-0202 AKH60N 2000g 360mm 14、22、38、60㎜2 215-4855 AKH60N Dies 14~38 SQ 215-4864 AKH60N Dies 60 SQ IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less