HAND TOOL

Grasp / collapse / bend / drag  Tightly grasp the wide tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-07: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0455 SM-07 115 ●  □  65 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Type angle 60 °. No tip nicks.  It is recommended that you do not want to scratch because there is no notch at the tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 60 ° Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-1524 NNP-150BG 150 ■  - 120 ※ Grip: ■ = Vinyl

Read more less

Elongated tip shape. No tip nicks.  It is recommended that you do not want to scratch because there is no notch at the tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-1515 NNP-150G 150 ■  - 120 ※ Grip: ■ = Vinyl

Read more less

Pinch / Pull / Piss  The tip is a long and long jaw section, so grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-03: Easy-to-fit elastomer resin / Plastic spring (durability about 10 times higher than our company)◦ NNP: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Replacement) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0482 NNP-130 130 ■  ◎  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Type angle 45 °. Pick up / pinch / line up  Like a tweezers, I grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-04: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ NNP-B: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 45 ° Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0491 NNP-130B 130 ■  ◎  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

A blade angle of 22 ° makes it easy to enter a narrow place.  Series only blade angle 22 °. It has a total length of 125 mm, and it corresponds to a detailed and intricate work.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Easy-to-purchase vinyl grip / Continuous work is easier coil spring (※ Please inquire for spring exchange)◦ Stainless steel stopper (back of blade) / with opening preventing pin material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 22°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-1320 MPN-125 125 ■  ◎  65 3.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

Read more less

Durability best in small class. High precision and beautiful cut surface.  Outstanding sharpness and high precision and beautiful cutting surfaces are the smallest plastic nippers.  We reduced the total weight to about 89% of our conventional product (PNP - 125 G - S), reducing the burden.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Elastic elastomer resin grip / handy plastic grip / plastic spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-0215 HP-125 125 ●  □  70 5.0 ※ grip: ● = elastomer □ = plastic

Read more less

Plastic nipper series The smallest class.  With sharp sharpness, it demonstrates its power in delicate work.◦ Blade surface shape is flat type only◦ SM-02: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ MPN: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade  Blade angle 18 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-0190 SM-02 100 ●  □  55 3.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Industry's lightest! It is the lightness of shock.  Develop products based on customer's voice. Compared to the total weight of our conventional products (PNP), we have succeeded in significantly reducing weight from 77% (LPN - 150 S) to 82% (LPN - 125 S).  Cutting capacity and durability are equivalent to those of conventional products.◦ Blade surface shape is flat type only◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material S58C Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-0251 LPN-125S 125 ●  □  78 5.0 217-0260 LPN-150S  150 ●  □  115 5.0 ※ grip: ● = elastomer □ = plastic spring

Read more less

Plastic nipper series The smallest class.  With sharp sharpness, it demonstrates its power in delicate work.◦ Blade surface shape is flat type only◦ SM-02: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ MPN: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Wire Plastic 217-1311 MPN-100 100 ■  ◎  50 1.0 3.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

  Nipper series minimum class.  With sharp sharpness, it demonstrates its power in delicate work.◦ MMP: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18 °   Product Code Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0181 MMP-100 100 ■  ◎  50 1.6 Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Nipper series minimum class.  With sharp sharpness, it demonstrates its power in delicate work.◦ SM-01: Easy fit to hand Elastomer resin grip / Plastic spring (durability about 10 times compared to our company) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18 ° Product Code Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0172 SM-01 100 ●  □  55 1.6 Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Nippa series The strongest cutting force. Piano wire Φ 2.0 mm possible.  Use the same highest grade steel as power Nippa. Improved blade angle and finish, improved cutting force and durability.◦ Apply the lever principle, strongly cut piano wire · hard steel wire◦ New type of angle is an angle.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability material SK 85 (SK 5) Hardness (HRC) 62 ~ 67 (blade part) Blade angle 15°  Product Code Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire Piano Wire 217-0808 NP-190BZ 190 ●  - 270 2.6 3.2 2.0 ※ Grip: ● = Elastomer ■ = Vinyl ▲ = Plastic

Read more less

Industry's lightest! It is the lightness of shock.  "I want a Nippa that is light and highly durable, not fatigue for long hours work." Based on the customer's voice, I planned and developed it.  (LN - 150 S) to 86% (LN - 125 S) of the total weight of our conventional products (NP).  Hand less fatigue, reduce burden when carrying mobile waist bags.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy plastic springs for continuous work. Durability Approximately 10 times higher than our company (※ LN - 175 has no spring) material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle 15°  JIS JIS B 4635 J-180 * LN-175 only PAT.  ○  Product Code. Part number Nominal size grip weight Cutting Capacity(mm) （mm） Material Spring （g） Wire Copper Wire 217-0701 LN-125S 125 ●  □  82 1.5 2.6 217-0710 LN-150S 150 ●  □  122 1.9 3.2 217-0729 LN-175 175 ●  - 180 2.2 3.2 ※ grip: ● = elastomer □ = plastic spring

Read more less

Industry's lightest! It is the lightness of shock.  "I'd like pliers that are light, durable and hard to get tired of working for a long time." Planning and development based on customer's voice.  We succeeded in weight saving by about 72% (LP - 200) to 80% (LP - 150).  Hand less fatigue, reduce burden when carrying mobile waist bags.◦ Long size blade with VVF (3 core) wire cutting at once◦ Elastic elastomer resin grip which is familiar to hand material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle - - JIS - - PAT. - - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-0093 LP-150 150 ●  - 165 2.2 3.0 217-0109 LP-175 175 ●  - 200 2.8 3.5 217-0118 LP-200 200 ●  - 265 3.4 4.0 ※ grip: ● = elastomer

Read more less

Piano wire · hard steel wire OK! Please feel the difference between steel and finish.  In the power series, the quality of the steel is different. We used the finest steel materials, improved blade angle and finishing work, improved cutting force and durability. With eccentric lever, strongly cut piano wire · hard steel wire.◦ VVF 3 long sized blade capable of cutting the core wire at one time◦ In the gripper part there is a diamond shape with nuts, bolts added◦ From the main body to the steering wheel, a smooth shape without catching◦ Handle: Easy to grip and easy to grip. Elastic elastomer resin grip◦ Grip hole for falling prevention strap installation material SK 85 (SK 5) JIS - Hardness (HRC) 62 ~ 67 (blade part) PAT. - Blade angle - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm) Material Spring （g） Wire Copper Wire Piano Wire 217-1357 PP-170 170 ●  - 210 2.2 3.0 2.0 217-0312 PP-200 200 ●  - 245 2.8 3.5 2.0 217-0321 PP-220 220 ●  - 320 3.4 4.0 2.0 ※ grip: ● = elastomer

Read more less

Electric installation workers can use safely.  We are aiming at a lot of people who work in the office. We have a lot of work to do. With eccentric lever, strongly disconnect VVF line.◦ VVF 3 long sized blade capable of cutting the core wire at one time◦ In the gripper part there is a diamond shape with nuts, bolts added◦ With terminal crimping function (Simple type: 1.25 ~ 5.5 m²)◦ From the main body to the steering wheel, a smooth shape without catching◦ Handle: Easy to grip and easy to grip. Elastic elastomer resin grip◦ Grip hole for falling prevention strap installation material Vanadium steel Hardness (HRC) 62 ~ 67 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-1737 DP-200 200 ●  - - 245 2.8 3.5 217-1746 DP-220 220 ●  - - 320 3.4 4.0 ※ grip: ● = elastomer

Read more less

Cut / bend / Screwdrive function / Corresponds to electric work.  It is an evolutionary form of a telephone radio pliers. It is possible to correspond to various fields in the field with just one.◦ Two kinds of flu material. Elastomer resin that is familiar to the hand / Vinyl that is easy to purchase◦ Coil spring for easy continuous operation material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-0394 BR-150G-S 150 ■  ◎  130 1.5 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

Read more less

"Strong nipper" is one of the JIS standard categories. Despite being a standard product, we succeeded in weight saving and function improvement pursuing the shape and structure to the limit of the standard. It corresponds to various wires, promising excellent sharpness and comfort.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous spring coil spring (※ stated as "S" in product number) / without spring◦ There is a model number with a blade hole for stripping peeling (* described as "H" in part number) Product Code. Part number Nominal size weight Cutting Capacity(mm) （mm) （g) Wire Copper Wire Piano Wire 217-0136 NP-190 G 190 265 2.6 3.2 2

Read more less

"Strong nipper" is one of the JIS standard categories. Despite being a standard product, we succeeded in weight saving and function improvement pursuing the shape and structure to the limit of the standard. It corresponds to various wires, promising excellent sharpness and comfort.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous spring coil spring (※ stated as "S" in product number) / without spring◦ There is a model number with a blade hole for stripping peeling (* described as "H" in part number)   material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle 15° JIS JIS B 4635 J-130 / J-160 PAT. - - Product Code. Part number Nominal size grip weight Cutting Capacity(mm) （mm) Material Spring （g) Wire Copper Wire 217-0011 NP-125 GH 125 ■ - - 90 1.5 2.6 217-0020 NP-150GH 150 ■ - - 155 1.9 3.2

Read more less

LOBSTER Compact Aluminum Cutter with Stainless Steel Cutting Blade APS20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Remark 215-0691 APS20A 160g 215mm 38mm Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 1.6 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less   IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum nippers APN20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Retail/User prices Remark 215-0682 APN20A 170g 215mm 38mm open price Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 2.0 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less than 980N IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Adjustable Wrenches With Insulated Grip S36  • Despite the 250-mm body, the jaws open 36-mm wide, which is a standard opening for a 300-mm body• Test voltage: 20 kV for 1 minute (Operating temperature range: -20 ° C to 70 ° C)Specifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension Remark 215-6127 S36 500g 260mm 9.0mm 15.5mm 0～36mm M24 with insulation grip IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useInsulation is provided for the molded cover (grip) only. When using this tool on live wires, do not touch any part other than the molded cover.Be sure to wear the insulation protection gear (rubber gloves and rubber boots).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.• Despite the 250-mm body, the jaws open 36-mm wide, which is a standard opening for a 300-mm body• Test voltage: 20 kV for 1 minute (Operating temperature range: -20 ° C to 70 ° C)SpecificationsIMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useInsulation is provided for the molded cover (grip) only. When using this tool on live wires, do not touch any part other than the molded cover.Be sure to wear the insulation protection gear (rubber gloves and rubber boots).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hybrid Water Pump pliers UU4150  • The jaw opening varies in 6 steps at irregular pitches that accommodate pipe standards. The handle opening stays the same for the most part, regardless of the target workpiece size.• Owing to the 3-point support structure and deformed tooth profile, this tool can securely work with the grip.• Safety design (with stopper) to prevent hands being caught in the handle.• Applicable to nuts up to 41 mm in width across flats (M27), up to 50 mm pipe / round rod, and 3/8 stud bolts.• Lightweight design: Only 280 g (approx. 30 g weight reduction in comparison with our conventional models)• New profile that does not cause damage to the head of nuts.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 size4 size5 Bolt, nut maximum dimension 215-0664 UU4150 280g 226mm 9.0mm 43mm 52mm 50mm M27 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Combination Pliers LOBSTER pliers feature a proud history that dates back to 1928 as the first pliers made in Japan. The excellent quality is highly rated and trusted.Use / Application• Tightening and removing nuts and bolts• Cutting, twisting, bending and tensioning wires• Bending thin steel plates• Gripping objects that can not gripped by handSpecifications  Product Code. Model No. weight size1 size2 size3 215-7463 P200 250g 203mm 11mm 46.0mm 215-7472 P250 360g 248mm 12mm 58.0mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not infect target objects unstably. Otherwise, the tool may slip, causing your fingers to be caught in the tool.During work, wear protective goggles.Do not use this tool as a substitute for a hammer.Do not apply impact to this tool by hitting it with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Crimping Side-Cutting Pliers CSC225  Specifications Product Code. Model No. weight size1 Remark 215-0576 CSC225 365g 365mm Cutting capacity ①Iron wire:φ3.6 ②Copper wire:φ4.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER  Side-Cutting Pliers 2508  Specifications Product Code. Model No. weight size1 Remark 215-0558 2508 350g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Long-Nose Pliers 2606  Specifications Product Code. Model No. weight size1 Remark 215-0521 2606 130g 150mm Cutting capacity ①Iron wire:φ1.6 ②Copper wire:φ2.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK6 For insulated crimp terminals, open barrel terminals ● One tool for crimping insulated crimp terminals and open barrel terminals, and bolt / cable cutting and stripping• Wire cutter• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No.  weight size1 215-0169 FK6 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK5 For open barrel terminals ● One tool for crimping open barrel terminal and bolt / cable cutting and stripping• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0150 FK5 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※Specifications may be changed for improvement without prior notice..

Read more less

Electric equipment crimping tool FK4 For insulated crimp terminals ● One tool for crimping insulated crimp terminals and bolt / cable cutting and stripping• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0141 FK4 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK3 For non-insulated terminals and P.B sleeves ● One tool for crimping non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping.• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0132 FK3 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK2 Insulated crimp terminals, non-insulated terminals and P.B sleeves ● One tool for crimping insulated crimp terminals / non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping• Wire cutterInsulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0123 FK2 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring. CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK1 For open barrel terminals, for non-insulated terminals and sleeves ● One tool for crimping open barrel terminals / non-insulated terminals, and bolt / cable cutting and stripping• Wire cutter• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0114 FK1 275g 235mm ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Cable Stripper • This tool can easily strip a cable without damage, by simply turning the hook on the cable.• Special resin grip is ergonomically shaped to fit the hand, and prevent fatigue during work.• Precision ground cutter blade is made of special hard steel wire that maintains cutting performance for a long time.A spare cutter blade is included.Use / Application• Stripping cable sheathSpecifications  Product Code. Model No. weight size1 Use range 215-0318 CS16 75g 128mm φ4～16mm 215-0327 CS28 75g 132mm φ8～28mm 215-0336 CS35 85g 153mm φ28～35mm 215-0345 CS50 90g 166mm φ35～50mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic puncher • Hydraulic puncher• Enables smooth punching work in 18 steps ( 17.5 mm to  115.5 mm). Applicable to thin plate and soft steel plate of 3.2 mm thickness (stainless steel thickness 1.6 mm) after replacing the punch die.• Light 2.6 kg body and 20 kgf handle load enable easy punching work.Use / Application• Construction work (Electricity, tap water, gas, etc.)• Piping workSheet metal work and power distribution panels• Punching holes for mounting parts in control panelsSpecifications Product Code Model No. weight Set details 215-0266 LP104BP 7400g H150P、SP104、PSL、PSS、PSPL、PSPS、B16、B22、B28、B36、B42、B54 215-0275 PSS 150g A15～A25、B16 215-0284 PSL 270g A31～A75、B22～B104   Shaft for LOBSTER puncherIMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not operate the handle while touching the punch dies.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic Crimping Tool AKH150S • Terminals can be held and crimped quickly in 1 or 2 squeezes of the handle. Return speed is only 3 seconds.Use / Application• Equipped with fast feed mechanismSpecifications  Product Code. Model No. weight size1 Use range 215-0211 AKH-150S(14-150SQ), 4300g 500mm 14、22、38、60、70、80、100、150㎜2 215-0220  Dies  AKH-150(14SQ), 215-0239  Dies  AKH-150(22SQ), 215-0248  Dies  AKH-150(38/60/70SQ), 215-0257  Dies  AKH-150(80/100/150SQ), IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic Crimping Tool AKH60N • Lightweight compact type (Overall length: 360 mm, Weight: 2 kg)• Equipped with auxiliary lever, enabling easy and quick crimping with one handUse / Application• Quick crimping, applicable to up to 60 sq.Specifications Product Code. Model No. weight size1 Use range 215-0202 AKH60N 2000g 360mm 14、22、38、60㎜2 215-4855 AKH60N Dies 14~38 SQ 215-4864 AKH60N Dies 60 SQ IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK38A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.For non-insulated sleeves (P-B) for copper wire.Specifications  Product Code. Model No. weight size1 size2 Use range 215-0080 AK38A 670g 335mm 82mm 14、22、38㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK25A • AK28A For closed end insulated connectors • Smooth handle operation• Forming check mechanism incorporated in the body. Smart collar design.• Handle is narrower than conventional models. (Approx. 200 mm when opened.) Handle is easily operated with one hand while holding the terminal with the other.Use / ApplicationFor closed end insulated connectorsSpecifications Product Code. Model No.  weight size1 size2 Use range 215-0053 AK25A 415g 266mm 82mm CE1、2、5 215-4484 AK28A 425g 269mm 82mm CE1、2、5、8 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※  Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK22A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.•For non-insulated sleeves (P-B) for copper wire.Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-4527 AK22A 675g 336mm 82mm 5.5、8、14、22㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

IREGA Super Wide Opening 1000V Insulated Adjustable Wrenches | SWO 92 - 1000V 1000V insulated wrenches3 LAYERS OF "PLASTISOL"The handle insulation material fulfills the requirements of IEC 900 and EN-60900 as far as it is concerned.Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST, according to EN-60900 Standard, equivalent to IEC-900, and consists of a 10,000V charge for 10 seconds, after which there should be no damage to the handle.The three "Plastisol" layers in different colors allow the user to easily check the condition of the insulation.• Inasmuch as the "Plastisol" maintains the red color throughout the entire surface.• When Orange color appears at some area, but safety is to be full and guaranteed, the user must be Cautious as natural wearing has started.• As soon as possible, install the adjustable wrench as a safety tool for electrical installations, and replace it for a new one.• There is a fourth black layer (without electrical insulation properties) at the bottom of the handle, aimed to provide extra protection against falls, knocks, etc ... on that area.SWO 92 - 1000VSWO 92 - 6 "- 34 mm (1 3/8") Super Wide Opening78% wider than standard adjustable wrenches of similar (6 ") size!Lighter weight - 250 grams 68% lighter than standard adjustable wrenches (12 ") with similar opening!SWO 92 - 8 "- 39 mm (1 1/2") Super Wide Opening62% wider than standard adjustable wrenches of similar (8 ") size!Lighter weight - 345 grams 56% lighter than standard adjustable wrenches (12 ") which has smaller opening! Product Code. SWO 92 Length Opening Opening Weight (gr) 1000V mm. inches 207-3772 6" 176 34 1 3/8" 250 207-3781 8" 216 39 1 1/2" 345 Importan notice:DO NEVER TOUCH NON INSULATED PARTS WHILE WORKING ON VOLTAGE INSTALATIONS! The adjustable wrenches with insulated handle can not be standardized, given that knurl that drives the opening / closing, is not insulated.

Read more less

IREGA 1000V Insulated Wdjustable Wrenches MOD. 92 - 15" - 1000V 1000V insulated wrenches3 LAYERS OF "PLASTISOL"The handle insulation material fulfills the requirements of IEC 900 and EN-60900 as far as it is concerned.Every IREGA 92-1000V adjustable wrench undergoes a HIGH VOLTAGE TEST, according to EN-60900 Standard, equivalent to IEC-900, and consists of a 10,000V charge for 10 seconds, after which there should be no damage to the handle.The three "Plastisol" layers in different colors allow the user to easily check the condition of the insulation.• Inasmuch as the "Plastisol" maintains the red color throughout the entire surface.• When Orange color appears at some area, but safety is to be full and guaranteed, the user must be Cautious as natural wearing has started.• As soon as possible, install the adjustable wrench as a safety tool for electrical installations, and replace it for a new one.• There is a fourth black layer (without electrical insulation properties) at the bottom of the handle, aimed to provide extra protection against falls, knocks, etc ... on that area.MOD. 92 - 15 "- 1000VNew Dimension: 15 "Standard Opening. Available with 1000V Insulated Handle. Product Code. 92-1000V Length Opening Opening Weight (gr) mm. inches 207-3587 15" 386 43,12 1 11/16" 1600 Importan notice:DO NEVER TOUCH NON INSULATED PARTS WHILE WORKING ON VOLTAGE INSTALATIONS! The adjustable wrenches with insulated handle can not be standardized, given that knurl that drives the opening / closing, is not insulated.

Read more less

IREGA Super Wide Opening Adjustable Wrenches - Xtra Slim jaw SWO 92XSGreater Accessibility thanks to the Xtra Slim jaw design: Up to 50% thinner than standard wrenches with a similar opening.Greatest Accessibility due to same reduced thickness along full length of Xtra Slim jaws.• Chrome Vanadium Steel• ErgoTop ergonomic and replaceable grip. Full handle below the grip.• Non-protruding jaw shank at maximum openingSWO 92XS 6 "34 mm (1 3/8 ") Super Wide Opening78% wider than standard adjustable wrenches of similar (6 ") size!Lighter weight - 200 grams68% lighter than standard adjustable wrenches (12 ") with similar opening! Product Code SWO Jaw Length Opening Opening Weight 92XS thickness mm. mm. inches (gr.) 207-3514 6” 4,5 176 34 1 3/8” 200

Read more less

IREGA 30" (750MM) ADJUSTABLE WRENCH 771-30" IREGA offers the adjustable wrench 771-30 "for the heaviest and most demanding jobs on industrial, petroleum, mining, metallic construction fields, etc.Manufactured according to the most stringent International Standards. Exceeds UNE 16-532.Forged in one single piece. Chrome vanadium steel. Great resistance, minimum wear, unbeatable durability.Metric measurement scale on jaws for easy jaws, presetting and sizing of nuts, bolts, pipes, etc. Product Code Size (") 77 Length Opening Opening Weight(g) mm. inches 207-3107 30" 750 78 3" 5,520

Read more less