Thickness Gauges

22 products


  • [PEACOCK] Dial Lens Gauge GL

    PEACOCK Peacock Dial Lens Gauge GL

    Peacock Dial Lens Gauge GL The dial lens gauge can measure convex, concave, convexo-concave and any other lenses in the same gauge by replacing the two contact points and the anvil. Model GL Graduation 0.01mm Range 10mm   Specifications Model Graduation (mm) Range (mm) Throat depth (mm) Accuracy (µm) maximum lens diameter measurable (mm) maximum lens thickness measurable (mm) Measuring force less than (N) GL 0.01 10 30 ±20 ø 59 20 1.8  

    $103.19

  • [PEACOCK] Dial Sheet Gauges K-4

    PEACOCK Peacock Dial Sheet Gauges K-4

    Peacock Dial Sheet Gauges K-4 The sheet gauges can measure wide sheets since the throat depth of this gauges having 300, 500 and 690mm. Model K-4 Graduation 0.05mm Range 0~50mm Throat depth 500mm  Ø25mm flat contact point and anvil      Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Anvil Dia (mm) Measuring force less than (N) Dia (mm) Parallelism (µm) K-4 0.05 0 - 50 500 ±100 25 25 25 3.0    

    $1,306.14

  • Mitutoyo 155-905, 8mm to 150mm, 6 Piece Telescoping Gage Set

    MITUTOYO Mitutoyo 155-905, 8mm to 150mm, 6 Piece Telescoping Gage Set

    Mitutoyo 155-905, 8mm to 150mm, 6 Piece Telescoping Gage Set Spring-loaded plunger expands within the bore (or groove), allowing determination of the internal diameter (or groove width) With a knurled clamp Specifications for this item Brand Name Mitutoyo Ean 4946368023632 , 0603908047704 Item Volume 0.001 cubic_meters Item Weight 11.6 ounces Manufacturer Series Number 155-905 Measurement System Inch Model Number 155-905 Number of Items 1 Part Number 155-905

    $209.41

  • Mitutoyo 154-902, 3mm to 13mm, 4 Piece Small Hole Gage Set

    MITUTOYO Mitutoyo 154-902, 3mm to 13mm, 4 Piece Small Hole Gage Set

    Mitutoyo 154-902, 3mm to 13mm, 4 Piece Small Hole Gage Set Gaging surface is fully hardened to insure long tool life Extra long for gaging deep and shallow holes, slots, and similar workpieces Satin chrome finish Specifications for this item Brand Name Mitutoyo Ean 4946368023489 , 0603908047551 Item Volume 0.001 cubic_meters Item Weight 0.010 ounces Manufacturer Series Number 154-902 Measurement System Metric Model Number 154-902 Number of Items 1 Part Number 154-902 UNSPSC Code 41110000

  • Mitutoyo 7315 Dial Thickness Gage, Groove Thickness Blade Anvil, 0-10mm Range

    MITUTOYO Mitutoyo 7315 Dial Thickness Gage, Groove Thickness Blade Anvil, 0-10mm Range

    Mitutoyo 7315 Dial Thickness Gage, Groove Thickness Blade Anvil, 0-10mm Range Measuring force 1.4N or less Wide range of applications with various types of measuring faces (on the spindle and anvil) Easy to reach lifting lever Groove Thickness Blade Anvil Specifications for this item Brand Name Mitutoyo Display Type Dial Ean 4946368193243 Gradient Spacing 0.01 millimeters Item Weight 0.010 ounces Maximum Measurement 0-10mm Measurement Accuracy +/- 15 micrometer Measurement System Metric Model Number 7315 Number of Items 1 Part Number 7315 Range 0-10mm Resolution 0.01mm Style Dial

    $148.12

  • Mitutoyo 7360 Dial Thickness Gage, Tube Thickness Anvil, 0-10mm Range

    MITUTOYO Mitutoyo 7360 Dial Thickness Gage, Tube Thickness Anvil, 0-10mm Range

    Mitutoyo 7360 Dial Thickness Gage, Tube Thickness Anvil, 0-10mm Range Measuring force 1.4N or less Wide range of applications with various types of measuring faces (on the spindle and anvil) Easy to reach lifting lever Tube Thickness Anvil Specifications for this item Brand Name Mitutoyo Display Type Dial Ean 4946368193410 Gradient Spacing 0.01 millimeters Item Weight 9.6 ounces Maximum Measurement 0-10mm Measurement Accuracy +/- 15 micrometer Measurement System Metric Model Number 7360 Number of Items 1 Part Number 7360 Range 0-10mm Resolution 0.01mm Style Dial UNSPSC Code 41111601

    $106.24

  • Mitutoyo 7313 Dial Thickness Gage, Lens Thickness Reverse Anvil, 0-10mm Range

    MITUTOYO Mitutoyo 7313 Dial Thickness Gage, Lens Thickness Reverse Anvil, 0-10mm Range

    Mitutoyo 7313 Dial Thickness Gage, Lens Thickness Reverse Anvil, 0-10mm Range Measuring force 1.4N or less Wide range of applications with various types of measuring faces (on the spindle and anvil) Easy to reach lifting lever Lens Thickness Reverse Anvil Specifications for this item Brand Name Mitutoyo Display Type Dial Ean 4946368193236 Gradient Spacing 0.01 millimeters Maximum Measurement 0-10mm Measurement Accuracy +/- 15 micrometer Measurement System Metric Model Number 7313 Number of Items 1 Part Number 7313 Range 0-10mm Resolution 0.01mm Style Dial UNSPSC Code 41111601

    $124.62

  • Mitutoyo 7321 Dial Thickness Gauge, 0 mm-10 mm Range

    MITUTOYO Mitutoyo 7321 Dial Thickness Gauge, 0 mm-10 mm Range

    Mitutoyo 7321 Dial Thickness Gauge, 0 mm-10 mm Range Measuring force 1.4N or less Wide range of applications with various types of measuring faces (on the spindle and anvil) Easy to reach lifting lever Flat Anvil Deep Throat Specifications for this item Brand Name Mitutoyo Ean 4946368193281 Global Trade Identification Number 04946368193281 Included Components 1 x 7321 Item Weight 399 grams Measurement Accuracy n/a Model Number 7321 Number of Items 1 Part Number 7321

    $107.25

  • Mitutoyo 7301 Dial Thickness Gage, Flat Anvil, Standard Type, 0-10mm Range

    MITUTOYO Mitutoyo 7301 Dial Thickness Gage, Flat Anvil, Standard Type, 0-10mm Range

    Mitutoyo 7301 Dial Thickness Gage, Flat Anvil, Standard Type, 0-10mm Range Measuring force 1.4N or less Wide range of applications with various types of measuring faces (on the spindle and anvil) Easy to reach lifting lever Flat Anvil Product Specifications Color Dark Grey Display Type Dial Ean 4946368193137 , 0603908177821 Gradient Spacing 0.01 millimeters Included Components Unit^Instruction Guide Item Weight 13.4 ounces Manufacturer Series Number 7301 Material Aluminum Maximum Measurement 0-10mm Measurement Accuracy +/- 15 micrometer Model Number 7301 Number of Items 1 Part Number 7301 Range 0-10mm Resolution 0.01mm Size Standard, 0-10mm Range, 0.01mm Graduation, +/- 15 micrometer Accuracy

  • [PEACOCK] Dial Pipe Gauges P-2

    PEACOCK Peacock Dial Pipe Gauges P-2

    Peacock Dial Pipe Gauges P-2 Special gauges for measuring wall thickness of pipes and width of curved wood Model P-2 Graduation 0.01mm Range 0 - 15mm   Specifications Model Graduation (mm) Range (mm) Accuracy (µm) Pipe size measurable (mm) Measuring force less than (N) Minimum bore D Maximum wall thickness T Depth L P-2 0.01 0 - 15 ±22 5.1 15 50 1.8  

    $251.82

  • [PEACOCK] Dial Sheet Gauges K-1

    PEACOCK Peacock Dial Sheet Gauges K-1

    Peacock Dial Sheet Gauges K-1 The sheet gauges can measure wide sheets since the throat depth of this gauges having 300, 500 and 690mm. Model K-1 Graduation 0.01mm Range 0~20mm Throat depth 300mm  Ø10mm flat contact point and Ø20mm anvil      Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Anvil Dia (mm) Measuring force less than (N) Dia (mm) Parallelism (µm) K-1 0.01 0 - 20 300 ±22 10 10 20 2    

    $1,022.20

  • [PEACOCK] Dial Thickness Gauge Roller type HR-1

    PEACOCK Peacock Dial Thickness Gauge Roller type HR-1

    Peacock Dial Thickness Gauge Roller type HR-1 Special gauges for measuring of horizontally sliding a gauge with an object to be in inspected laid since the contact point and anvil are made with the roller. Convenient to continuously measuring thickness of thin objects, paper, rubber and film. Model HR-1 Graduation 0.01mm Range 0~15mm      Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Roller contact points Measuring force less than (N) OD (mm) Width (mm) Parallelism (µm) HR-1 0.01 0 - 15 70 ±22 22 7 10 2      

    $898.44

  • [PEACOCK] Dial Thickness Gauges H-3, roller type anvil

    PEACOCK Peacock Dial Thickness Gauges H-3, roller type anvil

    Peacock Dial Thickness Gauges H-3, roller type anvil These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material.  The objects to be measured is clamped by simple lever operation. The measured values are read directly on the dial gauge.  Since the anvil and the contact point are adjusted for parallelism, accurate measured values are obtained. Model H-3 Graduation 0.01mm Range 0~10mm Spherical contact point and roller type anvil   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) H-3 0.01 0~10 170 ±20 Spherical -- 1.8      

    $802.51

  • [PEACOCK] Dial Thickness Gauges H-2

    PEACOCK Peacock Dial Thickness Gauges H-2

    Peacock Dial Thickness Gauges H-2 These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material.  The objects to be measured is clamped by simple lever operation. The measured values are read directly on the dial gauge.  Since the anvil and the contact point are adjusted for parallelism, accurate measured values are obtained. Model H-2 Graduation 0.01mm Range 0~10mm Spherical contact point and anvil   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) H-2 0.01 0~10 170 ±20 Spherical -- 1.8      

    $308.96

  • [PEACOCK] Dial Thickness Gauges H-1A

    PEACOCK Peacock Dial Thickness Gauges H-1A

    Peacock Dial Thickness Gauges H-1A These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material.  The objects to be measured is clamped by simple lever operation. The measured values are read directly on the dial gauge.  Since the anvil and the contact point are adjusted for parallelism, accurate measured values are obtained. Model H-1A Graduation 0.01mm Range 0~10mm Ø5mm flat contact point and anvil (metal)   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) H-1A 0.01 0~10 120 ±20 5 5 1.8      

    $122.87

  • [PEACOCK] Dial Thickness Gauges (Large type) J-A

    PEACOCK Peacock Dial Thickness Gauges (Large type) J-A

    Peacock Dial Thickness Gauges (Large type) J-A These large thickness gauges having extended throat depth to measure at the center of wide sheets Model J-A Graduation 0.01mm Range 0~20mm The gauge sits by stand Ø10mm flat contact point and Ø20mm anvil (metal)   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) J-A 0.01 0~20 150 ±22 10 5 2.0      

    $517.25

  • [PEACOCK] Dial Thickness Gauges G-30

    PEACOCK Peacock Dial Thickness Gauges G-30

    Peacock Dial Thickness Gauges G-30 LARGE DIA CONTACT POINT AND ANVIL BEST MEASUREMENT OF Urethane form, common fabric and so on G-30 (30mm dia ; Flat type) Model G-30 Graduation 0.01mm Range 0~10mm Ø30mm flat contact point and anvil (metal)   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) G-30 0.01 0~10 20 ±20 30(metal) 20 1.8      

    $317.69

  • [PEACOCK] Dial Thickness Gauges G-20

    PEACOCK Peacock Dial Thickness Gauges G-20

    Peacock Dial Thickness Gauges G-20 LARGE DIA CONTACT POINT AND ANVIL BEST MEASUREMENT OF Urethane form, common fabric and so on G-20 (20mm dia ; Flat type) Model G-20 Graduation 0.01mm Range 0~10mm Ø20mm flat contact point and anvil (metal)   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) G-20 0.01 0~10 20 ±20 20(metal) 15 1.8    

    $288.97

  • [PEACOCK] Dial Thickness Gauges H-30

    PEACOCK Peacock Dial Thickness Gauges H-30

    Peacock Dial Thickness Gauges H-30 LARGE DIA CONTACT POINT AND ANVIL BEST MEASUREMENT OF Urethane form, common fabric and so on H-30 (30mm dia ; Flat type) Model H-30 Graduation 0.01mm Range 0~10mm Ø30mm flat contact point and anvil (metal)   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) H-30 0.01 0~10 120 ±20 30(metal) 20 1.8    

    $339.46

  • [PEACOCK] Dial Thickness Gauges G-4

    PEACOCK Peacock Dial Thickness Gauges G-4

    Peacock Dial Thickness Gauges G-4 These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material.  The objects to be measured is clamped by simple lever operation. The measured values are read directly on the dial gauge.  Since the anvil and the contact point are adjusted for parallelism, accurate measured values are obtained. Model G-4 Graduation 0.01mm Range 65mm (Anvil 55mm) Spherical contact point Anvil side is adjustable   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) G-4 0.01 65mm (Anvil 55mm) 30 ±20 ball tip -- 1.8  

    $386.09

  • [PEACOCK] Dial Thickness Gauges G-3

    PEACOCK Peacock Dial Thickness Gauges G-3

    Peacock Dial Thickness Gauges G-3 These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material.  The objects to be measured is clamped by simple lever operation. The measured values are read directly on the dial gauge.  Since the anvil and the contact point are adjusted for parallelism, accurate measured values are obtained. Model G-3 Graduation 0.01mm Range 30mm (Anvil 20mm ) Ø10mm flat contact point and anvil (ceramic) Anvil side is adjustable   Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) G-3 0.01 30 (Anvil 20mm) 20 ±20 10 5 1.8  

    $272.09

  • [PEACOCK] Dial Thickness Gauges G

    PEACOCK Peacock Dial Thickness Gauges G

    Peacock Dial Thickness Gauges G These thickness gauges are especially handy for measuring thickness of small parts, metal, rubber, vinyl, paper, foil and other sheet material.  The objects to be measured is clamped by simple lever operation. The measured values are read directly on the dial gauge.  Since the anvil and the contact point are adjusted for parallelism, accurate measured values are obtained. Model G Graduation 0.01mm Range 0 - 10mm Ø10mm flat contact point and anvil (ceramic) Specifications Model Graduation(mm) Range (mm) Throat depth (mm) Accuracy (µm) Contact Point Measuring force less than (N) Dia (mm) Parallelism (µm) G 0.01 0 - 10 20 ±20 10 5 1.8

Login

Forgot your password?

Don't have an account yet?
Create account