The NF-C Series is the economy class of molded case circuit breakers from MITSUBISHI ELECTRIC, covering standard distribution and control panel duty at a lower cost than higher breaking-capacity models. A thermal-magnetic trip unit opens the circuit on overload or short circuit, and the breaker doubles as a manual switch for isolating loads. It is used in lighting, power distribution and equipment feeder circuits.
| Part No. |
Class |
Mass (kg) |
Rated Voltage (V) |
Rated Current (A) |
Connection Method |
Earth Leakage Breaker Specification |
Rated Impulse Withstand Voltage (kV) |
Reference Ambient Temp. (℃) |
Dimension a (mm) |
| NF63-HV 2P 60A |
Mag-only (breaker with instantaneous trip only) |
0.55 |
- |
60 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
50 |
| NF63-HV 3P 10A |
Mag-only (breaker with instantaneous trip only) |
0.7 |
- |
10 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
75 |
| NF63-HV 3P 15A |
Mag-only (breaker with instantaneous trip only) |
0.7 |
- |
15 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
75 |
| NF63-HV 3P 20A |
Mag-only (breaker with instantaneous trip only) |
0.7 |
- |
20 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
75 |
| NF63-HV 3P 30A |
Mag-only (breaker with instantaneous trip only) |
0.7 |
- |
30 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
75 |
| NF63-HV 3P 40A |
Mag-only (breaker with instantaneous trip only) |
0.7 |
- |
40 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
75 |
| NF63-HV 3P 50A |
Mag-only (breaker with instantaneous trip only) |
0.7 |
- |
50 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
75 |
| NF63-HV 3P 60A |
Mag-only (breaker with instantaneous trip only) |
0.75 |
- |
60 |
Surface type: for crimp terminal, Rear type: round stud, Flush type: round stud, Plug-in type |
None |
8 |
40 |
75 |
| NF630-CW 3P 500A |
Molded case circuit breaker (general use) |
6 |
- |
500 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
140 |
| NF630-CW 3P 500A B |
Molded case circuit breaker (general use) |
6 |
- |
500 |
Rear type |
None |
8 |
40 |
140 |
| NF630-CW 3P 500A FP |
Molded case circuit breaker (general use) |
6 |
- |
500 |
Flush type |
None |
8 |
40 |
140 |
| NF630-CW 3P 600A |
Molded case circuit breaker (general use) |
6 |
- |
600 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
140 |
| NF630-CW 3P 600A B |
Molded case circuit breaker (general use) |
6 |
- |
600 |
Rear type |
None |
8 |
40 |
140 |
| NF630-CW 3P 600A FP |
Molded case circuit breaker (general use) |
6 |
- |
600 |
Flush type |
None |
8 |
40 |
140 |
| NF630-HEW 3P 600A |
Molded case circuit breaker (general use) |
6.5 |
- |
600 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
140 |
| NF630-REW 3P 600A |
Plug-in circuit breaker for switchboard |
6.5 |
- |
600 |
Surface type: with bar terminal, rear type, flush type, plug-in type |
None |
8 |
40 |
140 |
| NF630-SEW 3P 600A |
Plug-in circuit breaker for switchboard |
6.5 |
- |
600 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
140 |
| NF630-SEW 3P 600A B |
Plug-in circuit breaker for switchboard |
6.5 |
- |
600 |
Rear type |
None |
8 |
40 |
140 |
| NF630-SEW 4P 600A |
Plug-in circuit breaker for switchboard |
8.3 |
- |
600 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
185 |
| NF630-SW 3P 500A |
Mag-only (breaker with instantaneous trip only) |
6.2 |
- |
500 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
140 |
| NF630-SW 3P 500A B |
Mag-only (breaker with instantaneous trip only) |
6.2 |
- |
500 |
Rear type |
None |
8 |
40 |
140 |
| NF630-SW 3P 500A FP |
Mag-only (breaker with instantaneous trip only) |
6.2 |
- |
500 |
Flush type |
None |
8 |
40 |
140 |
| NF630-SW 3P 600A |
Mag-only (breaker with instantaneous trip only) |
6.2 |
- |
600 |
Surface type: with bar terminal |
None |
8 |
40 |
140 |
| NF630-SW 3P 600A B |
Mag-only (breaker with instantaneous trip only) |
6.2 |
- |
600 |
Rear type |
None |
8 |
40 |
140 |
| NF630-SW 3P 600A FP |
Mag-only (breaker with instantaneous trip only) |
6.2 |
- |
600 |
Flush type |
None |
8 |
40 |
140 |
| NF630-SW 4P 500A |
Mag-only (breaker with instantaneous trip only) |
8 |
- |
500 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
185 |
| NF630-SW 4P 600A |
Mag-only (breaker with instantaneous trip only) |
8 |
- |
600 |
Surface type: with bar terminal, Rear type: bus stud, Flush type: bus stud, Plug-in type |
None |
8 |
40 |
185 |
Confirm frame size, number of poles, rated current, breaking capacity needed and terminal style. Please confirm the full part number and options against the MITSUBISHI ELECTRIC catalog; contact us if you need help identifying the right model.
Mitsubishi Electric is a Japanese manufacturer of factory automation and low-voltage power distribution equipment, including MELSEC PLCs, servo systems, inverters, magnetic contactors and starters, circuit breakers and measuring instruments.
