Genuine PISCO product.
| Part No. |
Operating Temperature Range (℃) |
Workpiece Dia. Ø (mm) |
Jaw Shape |
Operating Pressure Range (MPa) |
Moment (N·m) |
Mounting |
Lubricated |
Cylinder Bore (Ømm) |
Operation |
Workpiece Dia. (mm) |
| CHM08BF02H |
0 ~ 60 (antifreeze) |
2 ~ 3 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM08BF03C |
0 ~ 60 (antifreeze) |
|
for Recessed Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
43895.0 |
| CHM08BF03H |
0 ~ 60 (antifreeze) |
3 ~ 4 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM08BF04H |
0 ~ 60 (antifreeze) |
4 ~ 6 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM08BF05C |
0 ~ 60 (antifreeze) |
|
for Recessed Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
43958.0 |
| CHM08BF06H |
0 ~ 60 (antifreeze) |
6 ~ 8 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM08BF07C |
0 ~ 60 (antifreeze) |
|
for Recessed Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
7 ~ 9 |
| CHM08BF08H |
0 ~ 60 (antifreeze) |
8 ~ 10 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
8.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM11BF06C |
0 ~ 60 (antifreeze) |
|
for Recessed Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
6 ~ 8 |
| CHM11BF06H |
0 ~ 60 (antifreeze) |
6 ~ 8 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM11BF08C |
0 ~ 60 (antifreeze) |
|
for Recessed Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
8 ~ 10 |
| CHM11BF08H |
0 ~ 60 (antifreeze) |
8 ~ 10 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM11BF10C |
0 ~ 60 (antifreeze) |
|
for Recessed Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
10 ~ 12 |
| CHM11BF10H |
0 ~ 60 (antifreeze) |
10 ~ 12 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
|
| CHM11BF12C |
0 ~ 60 (antifreeze) |
|
for Recessed Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
12 ~ 14 |
| CHM11BF12H |
0 ~ 60 (antifreeze) |
12 ~ 14 |
for Round-Hole Workpieces |
0.2 ~ 0.7 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Right Angle |
Not Required |
11.0 |
Single-Acting Open Fastener (Normally Open) |
|
Select the exact part number from the options. PISCO part numbers encode color, contacts, LED voltage, terminal type and options, so please check every character against your existing part or drawing. Contact us if you need help identifying a replacement.
PISCO (Nihon Pisco) is a Japanese manufacturer of pneumatic components, including push-to-connect fittings, tubing, speed controllers, vacuum pads and ejectors used in factory automation worldwide.