Genuine PISCO product.
| Part No. |
Operating Temperature Range (℃) |
Workpiece Dia. (mm) |
Jaw Shape |
Lubricated |
Workpiece Dia. Ø (mm) |
Moment (N·m) |
Mounting |
Cylinder Bore (Ømm) |
Operation |
Operating Pressure Range (MPa) |
| CHM08BE02H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
2 ~ 3 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM08BE03C |
0 ~ 60 (antifreeze) |
43895.0 |
for Recessed Workpieces |
Not Required |
|
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM08BE03H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
3 ~ 4 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM08BE04H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
4 ~ 6 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM08BE05C |
0 ~ 60 (antifreeze) |
43958.0 |
for Recessed Workpieces |
Not Required |
|
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM08BE06H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
6 ~ 8 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM08BE07C |
0 ~ 60 (antifreeze) |
7 ~ 9 |
for Recessed Workpieces |
Not Required |
|
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM08BE08H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
8 ~ 10 |
0.08 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
8.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE06C |
0 ~ 60 (antifreeze) |
6 ~ 8 |
for Recessed Workpieces |
Not Required |
|
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE06H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
6 ~ 8 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE08C |
0 ~ 60 (antifreeze) |
8 ~ 10 |
for Recessed Workpieces |
Not Required |
|
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE08H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
8 ~ 10 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE10C |
0 ~ 60 (antifreeze) |
10 ~ 12 |
for Recessed Workpieces |
Not Required |
|
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE10H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
10 ~ 12 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE12C |
0 ~ 60 (antifreeze) |
12 ~ 14 |
for Recessed Workpieces |
Not Required |
|
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
| CHM11BE12H |
0 ~ 60 (antifreeze) |
|
for Round-Hole Workpieces |
Not Required |
12 ~ 14 |
0.20 (at 0.5MPa, jaws parallel) |
Holder Shape: Floating Block Type, Chuck Direction: Parallel |
11.0 |
Single-Acting Open Fastener (Normally Open) |
0.2 ~ 0.7 |
Select the exact part number from the options. PISCO part numbers encode color, contacts, LED voltage, terminal type and options, so please check every character against your existing part or drawing. Contact us if you need help identifying a replacement.
PISCO (Nihon Pisco) is a Japanese manufacturer of pneumatic components, including push-to-connect fittings, tubing, speed controllers, vacuum pads and ejectors used in factory automation worldwide.