Bearings & Motion

NSK Cylindrical Roller Bearings, Single-Row N-Type, N330M ,D=150   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N330M 150 320 65 4 4 　 277 665 805 2200 　 1800 2200 25.8     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N328M ,D=140   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N328M 140 300 62 4 4 　 260 615 745 2400 　 2000 2400 21.7   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N326M ,D=130   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N326M 130 280 58 4 4 　 243 560 665 2600 　 2200 2600 17.7     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N324W ,D=120   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N324W 120 260 55 3 3 　 226 450 510 3000 　 1800 2200 12.9     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N322W ,D=110   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N322W 110 240 50 3 3 　 207 380 435 3400 　 2000 2400 10.3   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N321W ,D=105   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N321W 105 225 49 3 3 　 195 340 390 3800 　 2200 2600 8.7     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N320W ,D=100   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N320W 100 215 47 3 3 　 185.5 299 335 4000 　 2200 2800 7.6     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N319W ,D=95   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N319W 95 200 45 3 3 　 173.5 259 289 4300 　 2400 3000 6.1   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N318W ,D=90   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N318W 90 190 43 3 3 　 165 240 265 4500 　 2600 3000 5.32     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N317W ,D=85   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N317W 85 180 41 3 3 　 156 225 247 4500 　 2600 3200 4.54     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N316W ,D=80   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N316W 80 170 39 2.1 2.1 　 147 190 207 4800 　 2800 3400 3.85   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N315W ,D=75   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N315W 75 160 37 2.1 2.1 　 139.5 179 189 5000 　 3000 3800 3.2     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N314W ,D=70   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N314W 70 150 35 2.1 2.1 　 130 149 156 5600 　 3200 4000 2.67     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N313W ,D=65   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N313W 65 140 33 2.1 2.1 　 121.5 135 139 5600 　 3600 4300 2.17     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N312W ,D=60   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N312W 60 130 31 2.1 2.1 　 113 124 126 6000 　 3800 4500 1.78     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N311W ,D=55   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N311W 55 120 29 2 2 　 104.5 111 111 6300 　 4000 5000 1.42     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N310W ,D=50   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N310W 50 110 27 2 2 　 95 87 86 7100 　 4500 5600 1.11     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N309W ,D=45   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N309W 45 100 25 1.5 1.5 　 86.5 79 77.5 7500 　 5000 6000 0.869   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N308W ,D=40   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N308W 40 90 23 1.5 1.5 　 77.5 58.5 57 8500 　 5600 6700 0.649     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N307W ,D=35   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N307W 35 80 21 1.5 1.1 　 68.2 49.5 47 9500 　 6300 7500 0.476     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N306W ,D=30   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N306W 30 72 19 1.1 1.1 　 62 38.5 35 10000 　 7100 8500 0.353   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N305W ,D=25   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N305W 25 62 17 1.1 1.1 　 53 29.3 25.2 12000 　 8000 10000 0.233   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N304W ,D=20   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N304W 20 52 15 1.1 0.6 　 44.5 21.4 17.3 14000 　 10000 12000 0.148     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N230W ,D=150   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N230W 150 270 45 3 3 　 238 360 465 3000 　 1800 2200 10.4   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N228W ,D=140   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N228W 140 250 42 3 3 　 221 297 375 3400 　 2000 2400 8.09     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N226W ,D=130   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N226W 130 230 40 3 3 　 204 270 340 3800 　 2200 2600 6.49     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N224W ,D=120   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N224W 120 215 40 2.1 2.1 　 191.5 260 320 4000 　 2400 2800 5.63     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N222W ,D=110   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N222W 110 200 38 2.1 2.1 　 178.5 229 272 4300 　 2600 3000 4.65     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N221W ,D=105   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N221W 105 190 36 2.1 2.1 　 168.8 201 241 4500 　 2600 3200 4.01     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N220W ,D=100   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N220W 100 180 34 2.1 2.1 　 160 183 217 4500 　 2800 3400 3.36     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N219W ,D=95   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N219W 95 170 32 2.1 2.1 　 151.5 166 195 4800 　 3000 3600 2.79   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N218W ,D=90   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N218W 90 160 30 2 2 　 143 152 178 5000 　 3200 3800 2.31     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N217W ,D=85   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N217W 85 150 28 2 2 　 133.8 120 140 5300 　 3400 4000 1.87     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N216W ,D=80   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N216W 80 140 26 2 2 　 125.3 106 122 5600 　 3600 4300 1.47   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N215W ,D=75   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N215W 75 130 25 1.5 1.5 　 116.5 96.5 111 6000 　 3800 4800 1.23     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N214W ,D=70   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N214W 70 125 24 1.5 1.5 　 110.5 83.5 95 6300 　 4000 5000 1.14     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N213W ,D=65   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N213W 65 120 23 1.5 1.5 　 105.6 84 94.5 6300 　 4300 5300 1.05   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N212W ,D=60   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N212W 60 110 22 1.5 1.5 　 97.5 68.5 75 7100 　 4800 5600 0.823     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N211W ,D=55   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N211W 55 100 21 1.5 1.1 　 88.5 58 62.5 7500 　 5300 6300 0.634   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N210W ,D=50   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N210W 50 90 20 1.1 1.1 　 80.4 48 51 8500 　 5600 6700 0.483     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N209W ,D=45   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N209W 45 85 19 1.1 1.1 　 75 46 47 9000 　 6300 7500 0.429     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N208W ,D=40   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N208W 40 80 18 1.1 1.1 　 70 43.5 43 9500 　 6700 8000 0.375     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N207W ,D=35   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N207W 35 72 17 1.1 0.6 　 61.8 35.5 34 11000 　 7500 9000 0.301     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N206W ,D=30   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N206W 30 62 16 1 0.6 　 53.5 24.9 23.3 13000 　 8500 10000 0.208   DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N205W ,D=25   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N205W 25 52 15 1 0.6 　 45 17.7 15.7 16000 　 10000 12000 0.135     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Cylindrical Roller Bearings, Single-Row N-Type, N204W ,D=20   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Mass (kg) approx. d D B r min. r1 min. Fw Ew Cr C0r Thermal Reference Mechanical Grease Oil N204W 20 47 14 1 0.6 　 40 15.4 12.7 18000 　 12000 14000 0.107     DESIGN, TYPES, AND FEATURES Cylindrical roller bearings are classified into the following types depending on whether or not they have ribs on their rings:     Types NU, N, NNU, and NN are suitable as free-end bearings. Types NJ and NF can sustain limited axial loads in one direction. Types NH and NUP can be used as fixed-end bearings. The NH type consists of NJ-type cylindrical roller bearings and HJ-type L-shaped thrust collars The inner ring loose rib of the NUP type should be mounted so that the marked side is on the outside.     If a cage is nonstandard for a given bearing number the number of rollers may vary; in such a case, the load rating will differ from that listed in the bearing tables. Many NN double-row bearings have tapered bores, and they are primarily used in the main spindles of machine tools. Cages are made of either molded polyphenylenesulfide (PPS) or machined brass.     □Formulation of Bearing Designations Single-Row Cylindrical Roller Bearing     ①Bearing type NU : Single-row cylindrical roller bearings(Outer ring with both ribs + Inner ring without rib) Please refer to page C124 for detailed information. ②Dimension Series  10 : 10 Series, 2: 02 Series, 22 : 22 Series, 3 : 03 Series, 23 : 23 Series, 4 : 04 Series, ③Bore number   Less than 03, Bearing bore 01 : 12mm, 02 : 15mm, 03 : 17mm Over 04, Bearing bore Bore number X 5 (mm) ④Internal design E : High load capacity ⑤Cage  W : Pressed-steel Cage, M : Machined Brass Cage, No designation : Machined-brass cage (in Series 10) T : Polyamide 66 resin cage, T7 : L-PPS resin cage ⑥Internal clearance  For All Radial Brgs.Omitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3, CG : Special ClearanceFor Non-Interchangeable Cylindrical Roller BearingsCC : Normal Clearance, CC3 : Clearance greater than CC, CC4 : Clearance greater than CC3, CCG : Special Clearance ⑦Tolerance class  Omitted : ISO Normal，P6 : ISO Class 6，P5 : ISO Class 5，P4 : ISO Class 4 ⑧NSKHPSTM  & : NSKHPSTM Designation Tolerance Class : ISO Normal

Read more less

NSK Angular Contact Ball Bearings ,C: Contact Angle of 15°, 7220CTYP5 ,D=100   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Factor f0 Mass (kg) approx. d D B r min. r1 min. Cr C0r Grease Oil 7220CTYP5 100 180 34 2.1 1.1 149 127 5600 8000 14.5 3.65   DESIGN, TYPES, AND FEATURES SINGLE-ROW ANGULAR CONTACT BALL BEARINGS Single-row angular contact ball bearings have a contact angle allowing them to sustain significant axial loads in one direction together with radial loads. Because of their design, when a radial load is applied, an axial force component is produced; therefore, two or more opposed bearings must be used. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools where high running accuracy is required (refer to Chapter 9 Preload on Page A192 for more information). Usually, the cages for angular contact ball bearings with a contact angle of 30° (designation A) or 40°(designation B) are made in accordance with Table 1, but depending on the application, machined synthetic-resin cages or molded polyamide-resin cages may also be used. The basic load ratings given in the bearing tables are based on standard cages. Though the figures in the bearing tables on Pages C086 to C101 for bearing bore diameters of 10 to 120 show bearings with single-shoulder inner rings, dual-shoulder bearings are also available. Please consult NSK for more detailed information.   MATCHED ANGULAR CONTACT BALL BEARINGS The types and features of matched angular contact ball bearings are shown in Table 2.   Table 2  Types and Features of Matched Angular Contact Ball Bearings Figure  Arrangement  Features Back-to-Back(DB)(Example)7208 A DB    Radial loads and axial loads in both directions can be sustained.    Since the distance between the effective load centers a0 is large, this type is suitable if moments are applied. Face-to-Face(DF)(Example)7208 B DF    Radial loads and axial loads in both directions can be sustained.    Compared with the DB Type, the distance between the effective load centers is small, so the capacity to sustain moments is inferior. Tandem(DT)(Example)7208 A DT    Radial loads and axial loads in one direction can be sustained.    Since two bearings share the axial load, this arrangement is used when the load in one direction is heavy.     □Formulation of Bearing Designations Single-Row Matched Angular Contact Ball Bearings ①Bearing type 7 : Single-row angular contact ball bearings, matched angular contact ball bearings ②Dimension Series 2 : 02 Series, 3 : 03 Series, 9 : 19 Series, 0 : 10 Series ③Bore number  Less than 03, Bearing bore 00 : 10mm, 01 : 12mm, 02 : 15mm, 03 : 17mmOver 04, Bearing bore Bore number ×5 (mm)  ④Contact angle C : 15°, A5 : 25°, A : 30°, B : 40° ⑤Internal design EA : High Load Capacity ⑥Cage W : Pressed steel Cage, T85 : Machined brass cage (ball-guided),No designation : Machined brass cage (inner ring guided), TYN : Polyamide resin cage,T85 : Polyamide 46 resin cage, T7 : L-PPS resin cage ⑦Arrangement SU: Universal arrangement (single-row), DU : Universal arrangement (double-row),DB : Back-to-back arrangement, DF : Face-to-face arrangement, DT : Tandem arrangement ⑧Preload / Axial    internal clearance EL : Extra light preload, L : Light preload, M : Medium preload, H : Heavy preloadOmitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3,CNB : CN Clearance equivalent (universal arrangement)    DOUBLE-ROW ANGULAR CONTACT BALL BEARINGS Double-row angular contact ball bearings are essentially a back- to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one. These bearings can sustain axial loads in both directions and offer good capacity for sustaining moment loads. They are often used as fixed- end bearings and contain cages made of pressed steel.   □Formulation of Bearing Designations Double-Row Angular Contact Ball Bearings   ①Bearing type 5 : Double-row angular contact ball bearings ②Dimension Series 2 : 02 Series   3: 03 Series ③Bore number  03 and under: 00 : 10mm, 01 : 12mm, 02 : 15mm, 03 : 17mm 04 and over: Bore diameter bore number ×5 (mm) ④Internal design  ZZ: Steel shield on both sides, DDU: Rubber contact seal on both sides VV: Rubber noncontact seal on both sides ⑤Seals/shields  Z: Steel shield on one sides, DU: Rubber contact seal on one side, V: Rubber non-contact seal on one side ⑥Grease* NS7: NS HI-LUBE

Read more less

NSK Angular Contact Ball Bearings ,C: Contact Angle of 15°, 7219CTYP5 ,D=95   Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min-1) Factor f0 Mass (kg) approx. d D B r min. r1 min. Cr C0r Grease Oil 7219CTYP5 95 170 32 2.1 1.1 133 112 6000 8500 14.6 3.05     DESIGN, TYPES, AND FEATURES SINGLE-ROW ANGULAR CONTACT BALL BEARINGS Single-row angular contact ball bearings have a contact angle allowing them to sustain significant axial loads in one direction together with radial loads. Because of their design, when a radial load is applied, an axial force component is produced; therefore, two or more opposed bearings must be used. Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools where high running accuracy is required (refer to Chapter 9 Preload on Page A192 for more information). Usually, the cages for angular contact ball bearings with a contact angle of 30° (designation A) or 40°(designation B) are made in accordance with Table 1, but depending on the application, machined synthetic-resin cages or molded polyamide-resin cages may also be used. The basic load ratings given in the bearing tables are based on standard cages. Though the figures in the bearing tables on Pages C086 to C101 for bearing bore diameters of 10 to 120 show bearings with single-shoulder inner rings, dual-shoulder bearings are also available. Please consult NSK for more detailed information.   MATCHED ANGULAR CONTACT BALL BEARINGS The types and features of matched angular contact ball bearings are shown in Table 2.   Table 2  Types and Features of Matched Angular Contact Ball Bearings Figure  Arrangement  Features Back-to-Back(DB)(Example)7208 A DB    Radial loads and axial loads in both directions can be sustained.    Since the distance between the effective load centers a0 is large, this type is suitable if moments are applied. Face-to-Face(DF)(Example)7208 B DF    Radial loads and axial loads in both directions can be sustained.    Compared with the DB Type, the distance between the effective load centers is small, so the capacity to sustain moments is inferior. Tandem(DT)(Example)7208 A DT    Radial loads and axial loads in one direction can be sustained.    Since two bearings share the axial load, this arrangement is used when the load in one direction is heavy.     □Formulation of Bearing Designations Single-Row Matched Angular Contact Ball Bearings ①Bearing type 7 : Single-row angular contact ball bearings, matched angular contact ball bearings ②Dimension Series 2 : 02 Series, 3 : 03 Series, 9 : 19 Series, 0 : 10 Series ③Bore number  Less than 03, Bearing bore 00 : 10mm, 01 : 12mm, 02 : 15mm, 03 : 17mmOver 04, Bearing bore Bore number ×5 (mm)  ④Contact angle C : 15°, A5 : 25°, A : 30°, B : 40° ⑤Internal design EA : High Load Capacity ⑥Cage W : Pressed steel Cage, T85 : Machined brass cage (ball-guided),No designation : Machined brass cage (inner ring guided), TYN : Polyamide resin cage,T85 : Polyamide 46 resin cage, T7 : L-PPS resin cage ⑦Arrangement SU: Universal arrangement (single-row), DU : Universal arrangement (double-row),DB : Back-to-back arrangement, DF : Face-to-face arrangement, DT : Tandem arrangement ⑧Preload / Axial    internal clearance EL : Extra light preload, L : Light preload, M : Medium preload, H : Heavy preloadOmitted : CN clearance, C3 : Clearance greater than CN, C4 : Clearance greater than C3,CNB : CN Clearance equivalent (universal arrangement)    DOUBLE-ROW ANGULAR CONTACT BALL BEARINGS Double-row angular contact ball bearings are essentially a back- to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one. These bearings can sustain axial loads in both directions and offer good capacity for sustaining moment loads. They are often used as fixed- end bearings and contain cages made of pressed steel.   □Formulation of Bearing Designations Double-Row Angular Contact Ball Bearings   ①Bearing type 5 : Double-row angular contact ball bearings ②Dimension Series 2 : 02 Series   3: 03 Series ③Bore number  03 and under: 00 : 10mm, 01 : 12mm, 02 : 15mm, 03 : 17mm 04 and over: Bore diameter bore number ×5 (mm) ④Internal design  ZZ: Steel shield on both sides, DDU: Rubber contact seal on both sides VV: Rubber noncontact seal on both sides ⑤Seals/shields  Z: Steel shield on one sides, DU: Rubber contact seal on one side, V: Rubber non-contact seal on one side ⑥Grease* NS7: NS HI-LUBE

Read more less