KOKEN

KOKEN 3/8" Drive Impact Magnetic Semi-Deep Socket, 6-Point — 13300XG series, genuine KOKEN tool supplied through the official Korean importer. This semi-deep impact socket holds the fastener with a magnet and is built for impact wrench use. It suits assembly and maintenance work where moderate stud protrusion and dropped hardware are both issues. Key Features Magnet holds steel nuts and bolts in the socket Semi-deep length suits moderate stud protrusion Impact-rated for 3/8" drive impact wrenches Specifications Size / Spec Part No. 8mm 13300XG-8 10mm 13300XG-10 12mm 13300XG-12 13mm 13300XG-13 14mm 13300XG-14 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Magnetic Deep Socket, 6-Point — 13300G series, genuine KOKEN tool supplied through the official Korean importer. The magnet holds only steel fasteners. This deep impact socket has a magnet that holds the nut or bolt, so fasteners do not drop when using an impact wrench. It is used in assembly and repair work on long studs. Key Features Magnet retains steel fasteners in the socket Deep body reaches nuts on long studs Impact-rated for 3/8" drive impact wrenches Specifications Size / Spec Part No. 8mm 13300G-8 10mm 13300G-10 12mm 13300G-12 13mm 13300G-13 14mm 13300G-14 15mm 13300G-15 17mm 13300G-17 19mm 13300G-19 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Deep Socket, 6-Point — 13300M series, genuine KOKEN tool supplied through the official Korean importer. A 3/8" drive deep 6-point impact socket for use on air and cordless impact wrenches. It reaches nuts on long studs in automotive, assembly and maintenance work, where a standard-length impact socket would bottom out on the stud. Key Features Impact-rated for 3/8" drive impact wrenches 6-point grip resists rounding under impact Deep body for nuts on long studs Specifications Size / Spec Part No. 6mm 13300M-6 7mm 13300M-7 8mm 13300M-8 9mm 13300M-9 10mm 13300M-10 11mm 13300M-11 12mm 13300M-12 13mm 13300M-13 14mm 13300M-14 15mm 13300M-15 16mm 13300M-16 17mm 13300M-17 18mm 13300M-18 19mm 13300M-19 20mm 13300M-20 21mm 13300M-21 22mm 13300M-22 24mm 13300M-24 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Socket Set, 6-Point — 13242M, genuine KOKEN tool supplied through the official Korean importer. This set includes 3/8" drive 6-point impact sockets in common sizes. It is a starting kit for air and cordless impact wrench work in automotive, assembly and maintenance, and comes in the versions listed. Key Features Common sizes of 6-point impact sockets Impact-rated for 3/8" drive impact wrenches Check the piece count and contents listed Specifications Spec Part No. 11PCS 13242M About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Extra-Deep Socket, 6-Point — 13145M series, genuine KOKEN tool supplied through the official Korean importer. An extra-deep impact socket reaches nuts on very long studs or threaded rods with an impact wrench. It is used in construction, assembly and machinery work, for example on all-thread rod, anchor bolts and long suspension studs. Key Features Extra length for very long studs and rods Impact-rated for 3/8" drive impact wrenches 6-point profile grips the flats of the nut Specifications Size / Spec Part No. 8mm 13145M-100-8 10mm 13145M-100-10 12mm 13145M-100-12 13mm 13145M-100-13 14mm 13145M-100-14 17mm 13145M-100-17 6mm 13145M-150-6 8mm (13145M-150-8) 13145M-150-8 10mm (13145M-150-10) 13145M-150-10 12mm (13145M-150-12) 13145M-150-12 13mm (13145M-150-13) 13145M-150-13 14mm (13145M-150-14) 13145M-150-14 15mm 13145M-150-15 17mm (13145M-150-17) 13145M-150-17 6mm (13145M-200-6) 13145M-200-6 8mm (13145M-200-8) 13145M-200-8 10mm (13145M-200-10) 13145M-200-10 12mm (13145M-200-12) 13145M-200-12 13mm (13145M-200-13) 13145M-200-13 14mm (13145M-200-14) 13145M-200-14 15mm (13145M-200-15) 13145M-200-15 17mm (13145M-200-17) 13145M-200-17 6mm (13145M-250-6) 13145M-250-6 8mm (13145M-250-8) 13145M-250-8 10mm (13145M-250-10) 13145M-250-10 12mm (13145M-250-12) 13145M-250-12 13mm (13145M-250-13) 13145M-250-13 14mm (13145M-250-14) 13145M-250-14 15mm (13145M-250-15) 13145M-250-15 17mm (13145M-250-17) 13145M-250-17 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN 3/8" Drive Impact Bit Holder — 13142 series, genuine KOKEN tool supplied through the official Korean importer. Bit holders accept one shank size only. Confirm bit compatibility. An impact bit holder fits a 3/8" drive impact wrench and accepts replaceable bits. It lets one holder be used with several bit types and sizes in automotive and assembly work. Key Features Accepts replaceable bits; check bit shank per model Impact-rated for 3/8" drive impact wrenches Replace worn bits without replacing the holder Specifications Size / Spec Part No. 13142-F11.2 13142-F11.2 13142.F6.3 13142-F6.3 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Bit Holder — 13139, genuine KOKEN tool supplied through the official Korean importer. Bit holders accept one shank size only. Confirm bit compatibility. An impact bit holder fits a 3/8" drive impact wrench and accepts replaceable bits. It lets one holder be used with several bit types and sizes in automotive and assembly work. Key Features Accepts replaceable bits; check bit shank per model Impact-rated for 3/8" drive impact wrenches Replace worn bits without replacing the holder Specifications Spec Part No. 13139 13139 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Bit Holder — 13137H, genuine KOKEN tool supplied through the official Korean importer. Bit holders accept one shank size only. Confirm bit compatibility. An impact bit holder fits a 3/8" drive impact wrench and accepts replaceable bits. It lets one holder be used with several bit types and sizes in automotive and assembly work. Key Features Accepts replaceable bits; check bit shank per model Impact-rated for 3/8" drive impact wrenches Replace worn bits without replacing the holder Specifications Spec Part No. 13137H 13137H About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Bit Holder — 13137E, genuine KOKEN tool supplied through the official Korean importer. Bit holders accept one shank size only. Confirm bit compatibility. An impact bit holder fits a 3/8" drive impact wrench and accepts replaceable bits. It lets one holder be used with several bit types and sizes in automotive and assembly work. Key Features Accepts replaceable bits; check bit shank per model Impact-rated for 3/8" drive impact wrenches Replace worn bits without replacing the holder Specifications Spec Part No. 13137E 13137E About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Bit Holder — 13134, genuine KOKEN tool supplied through the official Korean importer. Bit holders accept one shank size only. Confirm bit compatibility. An impact bit holder fits a 3/8" drive impact wrench and accepts replaceable bits. It lets one holder be used with several bit types and sizes in automotive and assembly work. Key Features Accepts replaceable bits; check bit shank per model Impact-rated for 3/8" drive impact wrenches Replace worn bits without replacing the holder Specifications Spec Part No. 13134 13134 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Stud Puller / Setter — 13103M series, genuine KOKEN tool supplied through the official Korean importer. Match both thread diameter and pitch, for example M10 x 1.25 vs M10 x 1.5. A stud puller and setter grips a threaded stud so it can be installed or removed with a 3/8" drive impact wrench without damaging the threads. It is used in engine and machinery work. Key Features Sized by metric thread and pitch Impact-rated for 3/8" drive impact wrenches Grips the stud without thread damage Specifications Size / Spec Part No. 6(1.0) 13103M-6(1.0) 8(1.25) 13103M-8(1.25) 10(1.25) 13103M-10(1.25) 10(1.5) 13103M-10(1.5) 5(0.8) 13103M-5(0.8) 7(1.0) 13103M-7(1.0) About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Torx Bit Socket, Replaceable Bit — 13025 series, genuine KOKEN tool supplied through the official Korean importer. This 3/8" drive impact bit socket holds a replaceable Torx bit for use on impact wrenches. Worn bits can be replaced without replacing the holder, which suits production and repair work. Key Features Replaceable Torx bit; swap the bit when worn Impact-rated for 3/8" drive impact wrenches Match the T size to the screw recess Specifications Size / Spec Part No. T20 13025-50-T20 T25 13025-50-T25 T27 13025-50-T27 T30 13025-50-T30 T40 13025-50-T40 T45 13025-50-T45 T50 13025-50-T50 T55 13025-50-T55 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Impact Hex Bit Socket — 13012M series, genuine KOKEN tool supplied through the official Korean importer. These are metric sizes. Inch hex screws need inch bits. An impact hex bit socket puts a metric hex tip on a 3/8" drive body built for impact wrench use. It drives socket head cap screws in assembly, automotive and machinery work. Key Features Impact-rated for 3/8" drive impact wrenches Metric hex sizes; match the size to the screw Seat the tip fully before running the wrench Specifications Size / Spec Part No. 4mm 13012M-52-4 5mm 13012M-52-5 6mm 13012M-52-6 8mm 13012M-52-8 10mm 13012M-52-10 12mm 13012M-52-12 14mm 13012M-52-14 3mm, L:52mm 13012M-52-3 7mm, L:52mm 13012M-52-7 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Hex Bit, 8mm Hex Shank — 128H series, genuine KOKEN tool supplied through the official Korean importer. 8mm hex shank does not fit 1/4" or 5/16" holders. A hex bit with an 8mm hex shank, used in matching holders for driving socket head cap screws. It is used in automotive and machinery work with holders made for this metric shank size. Key Features 8mm hex shank fits matching bit holders Metric hex sizes as listed for each model Seat the bit fully before applying torque Specifications Size / Spec Part No. 3mm 128H-32-3 4mm 128H-32-4 5mm 128H-32-5 6mm 128H-32-6 8mm 128H-32-8 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN T-Handle Universal Spark Plug Socket Wrench, 6-Point — 127C series, genuine KOKEN tool supplied through the official Korean importer. Check the spark plug hex size before ordering. This T-handle wrench has a spark plug socket on a universal joint for reaching plugs at an angle. It is used in automotive, motorcycle and small engine service, where the T-handle gives good feel when starting plugs by hand. Key Features Universal joint for angled plug access T-handle for control when starting plugs Sized to common spark plug hexes Specifications Size / Spec Part No. 14mm 127C-14 16mm 127C-16 18mm 127C-18 20.8mm 127C-20.8 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 1/4" Drive Impact Universal Joint — 12770 series, genuine KOKEN tool supplied through the official Korean importer. A 1/4" square-drive impact universal joint for angled access with compact impact tools. Ball and hole retention types are available. Keep the working angle moderate to limit wear. Key Features Impact rated for use with compact impact tools Available with ball or hole retention Keep angles moderate to limit wear Specifications Size / Spec Part No. 12770-B 12770-B 12770-A 12770-A About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 1/4" Drive Impact E-Torx Socket — 12425 series, genuine KOKEN tool supplied through the official Korean importer. E-Torx sockets fit external Torx heads; internal Torx screws need a T-size bit socket. A 1/4" square-drive impact socket for small external Torx (E-Torx) bolt heads. It is used with compact impact tools on vehicles and machinery. It suits small E-Torx bolts with clear access. Key Features Fits external Torx heads, sized by E number Impact rated for use with compact impact tools Standard length for bolts with clear access Specifications Size / Spec Part No. E4 12425-E4 E5 12425-E5 E6 12425-E6 E7 12425-E7 E8 12425-E8 E10 12425-E10 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN T-Handle Universal Nut Grip Socket Wrench — 124M series, genuine KOKEN tool supplied through the official Korean importer. This T-handle wrench has a nut-holding socket on a universal joint, so a nut can be carried to an off-axis stud and started without dropping. It is used in engine bays and machinery. Key Features Holds the nut for one-handed starting Universal joint allows angled access to the stud Metric sizes as listed for each model Specifications Size / Spec Part No. 8mm 124M-600(2B)-8 10mm 124M-600(2B)-10 12mm 124M-600(2B)-12 13mm 124M-600(2B)-13 14mm 124M-600(2B)-14 17mm 124M-600(2B)-17 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 1/4" Drive Impact Socket, 6-Point — 12400A-3/8, genuine KOKEN tool supplied through the official Korean importer. Use impact-rated sockets on impact tools; standard chrome sockets can crack. A 1/4" square-drive 6-point impact socket for small hex fasteners driven with compact impact tools. It is used in assembly, automotive and maintenance work. It is offered in common small metric sizes. Key Features 6-point grip resists rounding small fasteners Impact rated for 1/4" drive impact tools Standard length for fasteners with clear access Specifications Spec Part No. 3/8" 12400A-3/8 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 1/4" Drive Impact Socket, 6-Point — 12400M series, genuine KOKEN tool supplied through the official Korean importer. Use impact-rated sockets on impact tools; standard chrome sockets can crack. A 1/4" square-drive 6-point impact socket for small hex fasteners driven with compact impact tools. It is used in assembly, automotive and maintenance work. It is offered in common small metric sizes. Key Features 6-point grip resists rounding small fasteners Impact rated for 1/4" drive impact tools Standard length for fasteners with clear access Specifications Size / Spec Part No. 4mm 12400M-4 4.5mm 12400M-4.5 5mm 12400M-5 5.5mm 12400M-5.5 6mm 12400M-6 7mm 12400M-7 8mm 12400M-8 9mm 12400M-9 10mm 12400M-10 11mm 12400M-11 12mm 12400M-12 13mm 12400M-13 14mm 12400M-14 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Double-Ended Phillips Bit, 1/4" Hex — 123PG series, genuine KOKEN tool supplied through the official Korean importer. Double-ended bits fit drivers with a matching chuck, not standard 1/4" quick-change holders. A double-ended Phillips bit has a tip at each end, so it can be flipped when one end wears. It is used in power drivers for assembly and construction work. Key Features Two tips per bit for longer working life Tip sizes and lengths as listed for each model Fits drivers that accept double-ended bits Specifications Size / Spec Part No. 1*65 123PG-1X65 2*65 123PG-2X65 3*65 123PG-3X65 1*75 123PG-1X75 2*75 123PG-2X75 3*75 123PG-3X75 1*100 123PG-1X100 2*100 123PG-2X100 3*100 123PG-3X100 1*110 123PG-1X110 2*110 123PG-2X110 3*110 123PG-3X110 1*150 123PG-1X150 2*150 123PG-2X150 3*150 123PG-3X150 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN 1/4" Drive Impact Pathfinder Deep Socket, 6-Point — 12365M series, genuine KOKEN tool supplied through the official Korean importer. Use impact-rated sockets on impact tools; standard chrome sockets can crack. A 1/4" square-drive deep 6-point impact socket from the Pathfinder line. It is used with compact impact tools for nuts on longer studs. Check the size and length shown for the variant you need. Key Features Deep body suits nuts on long studs 6-point grip suits standard hex fasteners Impact rated for 1/4" drive impact tools Specifications Size / Spec Part No. 10mm 12365M-10 11mm 12365M-11 12mm 12365M-12 13mm 12365M-13 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN 1/4" Drive Magnetic Impact Deep Socket, 6-Point — 12300G series, genuine KOKEN tool supplied through the official Korean importer. Use impact-rated sockets on impact tools; standard chrome sockets can crack. A 1/4" square-drive deep impact socket with a magnet to hold the fastener. It is used with compact impact drivers in assembly and maintenance. The magnet saves time when starting fasteners by hand. Key Features Magnet holds the nut or bolt in the socket Deep body suits nuts on long studs Impact rated for 1/4" drive impact tools Specifications Size / Spec Part No. 8mm 12300G-8 10mm 12300G-10 7mm 12300G-7 12mm 12300G-12 13mm 12300G-13 14mm 12300G-14 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Tamper-Resistant Torx Power Bit, 1/4" Hex Shank — 121T series, genuine KOKEN tool supplied through the official Korean importer. A standard Torx bit will not enter a pin-in security Torx screw; check for the centre pin before ordering. A longer power bit with a hollow Torx tip for pin-in security Torx screws, made for use in power and impact drivers. The extra length reaches recessed screws in housings and panels. Key Features Power-bit length reaches screws set below the surface 1/4" hex shank with groove for quick-release chucks Hollow tip also fits standard Torx screws of the same size Specifications Size / Spec Part No. TH20 121T-70-TH20 TH25 121T-70-TH25 TH27 121T-70-TH27 TH30 121T-70-TH30 TH40 121T-70-TH40 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Torx Power Bit, 1/4" Hex Shank — 121T series, genuine KOKEN tool supplied through the official Korean importer. A Torx power bit with a 1/4" hex shank for drills, impact drivers and quick-change holders. It drives Torx screws in construction, decking, assembly and automotive work, and is replaced as a consumable when the tip wears. Key Features 1/4" hex shank for drills and power drivers T sizes as listed for each model Replace when tips show wear to avoid cam-out Specifications Size / Spec Part No. T10 121T-70-T10 T15 121T-70-T15 T20 121T-70-T20 T25 121T-70-T25 T27 121T-70-T27 T30 121T-70-T30 T40 121T-70-T40 T10, L:50mm 121T-50-T10 T15, L:50mm 121T-50-T15 T20, L:50mm 121T-50-T20 T25, L:50mm 121T-50-T25 T27, L:50mm 121T-50-T27 T30, L:50mm 121T-50-T30 T40, L:50mm 121T-50-T40 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Torx Plus Power Bit, 1/4" Hex Shank — 121T series, genuine KOKEN tool supplied through the official Korean importer. Torx Plus (IP) and standard Torx (T) are not the same: an IP bit will not fit a T-recess screw properly, and vice versa. Torx Plus power bits drive screws with the Torx Plus (IP) recess, a six-lobe profile with flatter lobe walls than standard Torx. The 1/4" hex shank fits power drivers, impact drivers and quick-change bit holders. Key Features Sized by IP number; match it to the fastener recess Fits standard 1/4" hex quick-release chucks and bit holders Seat the bit fully before applying torque to protect the lobes Specifications Size / Spec Part No. IP20 121T-50IP-IP20 IP25 121T-50IP-IP25 IP27 121T-50IP-IP27 IP30 121T-50IP-IP30 IP40 121T-50IP-IP40 IP20 (121T-70IP-IP20) 121T-70IP-IP20 IP25 (121T-70IP-IP25) 121T-70IP-IP25 IP27 (121T-70IP-IP27) 121T-70IP-IP27 IP30 (121T-70IP-IP30) 121T-70IP-IP30 IP40 (121T-70IP-IP40) 121T-70IP-IP40 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Long Tamper-Resistant Torx Power Bit, 1/4" Hex Shank — 121T series, genuine KOKEN tool supplied through the official Korean importer. Standard Torx bits will not fit pin-type security screws. This long power bit has a tamper-resistant Torx tip with a center hole for security Torx screws. It fits power drivers with a 1/4" hex shank and reaches recessed security screws on appliances, vehicles and public equipment. Key Features Hollow tip fits pin-type security Torx screws 1/4" hex shank for drills and power drivers Long reach for screws set in deep recesses Specifications Size / Spec Part No. TH20 121T-100-TH20 TH25 121T-100-TH25 TH27 121T-100-TH27 TH30 121T-100-TH30 TH40 121T-100-TH40 TH15 121T-100-TH15 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Long Torx Power Bit, 1/4" Hex Shank — 121T series, genuine KOKEN tool supplied through the official Korean importer. A long Torx power bit has a 1/4" hex shank for drills, impact drivers and quick-change holders. The extra length reaches recessed Torx screws in assembly, cabinetry and construction work where a short bit cannot get in. Key Features 1/4" hex shank for drills and power drivers Long reach for screws set in deep recesses Replace when tips show wear to avoid cam-out Specifications Size / Spec Part No. T10 121T-100-T10 T15 121T-100-T15 T20 121T-100-T20 T25 121T-100-T25 T27 121T-100-T27 T30 121T-100-T30 T40 121T-100-T40 T10 (121T-150-T10) 121T-150-T10 T15 (121T-150-T15) 121T-150-T15 T20 (121T-150-T20) 121T-150-T20 T25 (121T-150-T25) 121T-150-T25 T27 (121T-150-T27) 121T-150-T27 T30 (121T-150-T30) 121T-150-T30 T40 (121T-150-T40) 121T-150-T40 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Long Torx Bit (Silver Finish) — 121T series, genuine KOKEN tool supplied through the official Korean importer. A long Torx bit with a 1/4" hex shank and silver finish, used in power drivers and bit holders. The extra length reaches recessed Torx screws in assembly, automotive and electronics work. Key Features Long reach for recessed Torx screws T sizes; match the size to the recess Fits standard 1/4" hex holders and drivers Specifications Size / Spec Part No. T10 121T-S-100-T10 T15 121T-S-100-T15 T20 121T-S-100-T20 T25 121T-S-100-T25 T27 121T-S-100-T27 T30 121T-S-100-T30 T10 (121T-S-150-T10) 121T-S-150-T10 T15 (121T-S-150-T15) 121T-S-150-T15 T20 (121T-S-150-T20) 121T-S-150-T20 T25 (121T-S-150-T25) 121T-S-150-T25 T27 (121T-S-150-T27) 121T-S-150-T27 T30 (121T-S-150-T30) 121T-S-150-T30 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Long Torx Bit Set (Silver Finish) — 121T series, genuine KOKEN tool supplied through the official Korean importer. This set includes long Torx bits in common T sizes with a silver finish. It is used with power drivers and bit holders on recessed Torx screws in assembly, automotive and electronics work, and comes in two lengths. Key Features Several T sizes included in one set Offered in two overall lengths, as listed Fits standard 1/4" hex bit holders and drivers Specifications Size / Spec Part No. 6PCS 121T-S-100 6PCS (121T-S-150) 121T-S-150 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Bit Adapter, 1/4" Hex — 112-50P-3/8X1/4, genuine KOKEN tool supplied through the official Korean importer. This adapter converts a 3/8" square drive to a 1/4" hex bit holder. It lets a ratchet or torque wrench drive standard 1/4" hex shank bits in automotive and assembly work. Key Features Accepts standard 1/4" hex shank bits Gives ratchet leverage to small bits Check bit retention before turning overhead Specifications Spec Part No. 3/8˝*1/4˝ 112-50P-3/8X1/4 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN 3/8" Drive Bit Adapter — 112 series, genuine KOKEN tool supplied through the official Korean importer. Make sure your bits have a 1/4" hex shank. Other shank sizes will not fit. A bit adapter fits a 3/8" drive ratchet and holds 1/4" hex shank bits, so small screwdriver bits can be turned with a ratchet. It is useful in automotive and assembly work where a screwdriver lacks leverage or space. Key Features Holds 1/4" hex shank bits on a 3/8" drive tool Ball-type retention holds the bit in place Check the drive and hex sizes of each model Specifications Size / Spec Part No. 3/8˝*1/4˝ 112-50B PH-3/8X1/4 3/8˝*1/4˝ (112-100B-3/8X1/4) 112-100B-3/8X1/4 3/8˝*1/4˝ (112-150B-3/8X1/4) 112-150B-3/8X1/4 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Bit Adapter, 1/4" Hex Shank to 1/4" Square Drive — 110 series, genuine KOKEN tool supplied through the official Korean importer. A bit adapter with a 1/4" hex shank and 1/4" square drive that lets a hex-chuck driver turn 1/4" drive sockets. It is used in light assembly and maintenance. Key Features Converts a hex-chuck driver to a socket driver Available in different lengths for different reach For running fasteners, not high torque Specifications Size / Spec Part No. 1/4˝*1/4˝ 110-35B-1/4X1/4 1/4˝*1/4˝ (110-50B-1/4X1/4) 110-50B-1/4X1/4 1/4˝*1/4˝ (110-100B-1/4X1/4) 110-100B-1/4X1/4 1/4˝*1/4˝ (110-150B-1/4X1/4) 110-150B-1/4X1/4 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Tamper-Resistant Torx Bit, 1/4" Hex Shank — 108T series, genuine KOKEN tool supplied through the official Korean importer. A standard Torx bit will not fit a security Torx screw with a centre pin; this hollow-tip type is required. A short insert bit with a hollow Torx tip for pin-in security Torx screws. The 1/4" hex shank fits standard bit holders, ratcheting bit drivers and power drivers. Key Features Sized by T number with an H suffix for the security type Short insert length suits bit holders and compact drivers Also drives standard Torx screws of the same size Specifications Size / Spec Part No. T10H 108T-25TH-T10H T15H 108T-25TH-T15H T20H 108T-25TH-T20H T25H 108T-25TH-T25H T27H 108T-25TH-T27H T30H 108T-25TH-T30H About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Torx Bit, 1/4" Hex Shank — 108T series, genuine KOKEN tool supplied through the official Korean importer. A Torx bit with a 1/4" hex shank, used in bit holders, screwdrivers and power drivers. It drives internal Torx screws in assembly, automotive, appliance and electronics work, and is replaced as a consumable when the tip wears. Key Features Fits standard 1/4" hex bit holders and drivers T sizes as listed for each model Replace the bit when the tip shows wear Specifications Size / Spec Part No. T10 108T-25-T10 T15 108T-25-T15 T20 108T-25-T20 T25 108T-25-T25 T27 108T-25-T27 T30 108T-25-T30 T40 108T-25-T40 T8 108T-25-T8 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Slotted Bit, 1/4" Hex Shank — 108S series, genuine KOKEN tool supplied through the official Korean importer. A slotted bit with a 1/4" hex shank, used in bit holders, screwdrivers and power drivers. It drives flat-slot screws in assembly, electrical and maintenance work, and the blade should fill the slot for a secure fit. Key Features Fits standard 1/4" hex bit holders and drivers Blade widths as listed for each model Match the blade width and thickness to the slot Specifications Size / Spec Part No. 3 108S-25-3 4 108S-25-4 4.5 108S-25-4.5 5 108S-25-5 5.5 108S-25-5.5 6 108S-25-6 8 108S-25-8 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Phillips Bit, 1/4" Hex Shank (No. 2) — 108P-25-2, genuine KOKEN tool supplied through the official Korean importer. This is a No. 2 Phillips bit with a 1/4" hex shank, the most common cross-head size. It fits bit holders, screwdrivers and power drivers used in assembly and maintenance work. Key Features No. 2 tip, the most common Phillips size Fits standard 1/4" hex bit holders and drivers Replace the bit when the tip shows wear Specifications Spec Part No. 2 108P-25-2 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Phillips Bit, 1/4" Hex Shank — 108P series, genuine KOKEN tool supplied through the official Korean importer. A Phillips bit with a 1/4" hex shank, used in bit holders, screwdrivers and power drivers. It drives cross-head screws in assembly, cabinetry and maintenance work, and is replaced as a consumable when the tip wears. Key Features Fits standard 1/4" hex bit holders and drivers Tip sizes as listed for each model Replace the bit when the tip shows wear Specifications Size / Spec Part No. 1 108P-25-1 3 108P-25-3 1 (108P-32-1) 108P-32-1 2 108P-32-2 3 (108P-32-3) 108P-32-3 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Hex Bit, 1/4" Hex Shank — 108H series, genuine KOKEN tool supplied through the official Korean importer. These are metric hex sizes. Inch hex screws need inch bits. A hex bit with a 1/4" hex shank, used in bit holders and power drivers to drive socket head cap screws. It is used in assembly, furniture and maintenance work, and is replaced when the corners wear. Key Features Fits standard 1/4" hex bit holders and drivers Metric hex sizes as listed for each model Replace the bit when its corners show wear Specifications Size / Spec Part No. 3mm 108H-25-3 4mm 108H-25-4 5mm 108H-25-5 6mm 108H-25-6 7mm 108H-25-7 8mm 108H-25-8 10mm 108H-25-10 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Hex Impact Bit, 32mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. Check the shank size against your bit holder before ordering. A hex impact bit with a 32mm hex shank for the largest socket head cap screws. It is used in matching impact bit holders on heavy machinery, presses and plant, with heavy-duty impact wrenches. Key Features 32mm hex shank fits matching impact bit holders Large metric hex sizes as listed Use only with impact-rated holders and drivers Specifications Size / Spec Part No. 19mm 107-32-19 22mm 107-32-22 24mm 107-32-24 27mm 107-32-27 30mm 107-32-30 32mm 107-32-32 36mm 107-32-36 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Torx Impact Bit, 22mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. Check the shank size against your bit holder before ordering. A Torx impact bit with a 22mm hex shank for very large Torx fasteners. It is used in matching impact bit holders on trucks and heavy machinery, where the largest Torx sizes are run with a heavy impact wrench. Key Features 22mm hex shank fits matching impact bit holders Very large T sizes as listed Use only with impact-rated holders and drivers Specifications Size / Spec Part No. T80 107-22-T80 T90 107-22-T90 T100 107-22-T100 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Hex Impact Bit, 22mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. Check the shank size against your bit holder before ordering. A hex impact bit with a 22mm hex shank for very large socket head cap screws. It is used in matching impact bit holders on heavy machinery, presses and plant equipment. Key Features 22mm hex shank fits matching impact bit holders Large metric hex sizes as listed Use only with impact-rated holders and drivers Specifications Size / Spec Part No. 19mm 107-22-19 22mm 107-22-22 24mm 107-22-24 27mm 107-22-27 30mm 107-22-30 32mm 107-22-32 17mm 107-22-17 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Torx Impact Bit, 16mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. Check the shank size against your bit holder before ordering. A Torx impact bit with a 16mm hex shank for large Torx fasteners. It is used in matching impact bit holders on trucks, buses and heavy equipment, where large Torx screws are run with an impact wrench. Key Features 16mm hex shank fits matching impact bit holders Large T sizes as listed for each model Use only with impact-rated holders and drivers Specifications Size / Spec Part No. T55 107-16-T55 T60 107-16-T60 T70 107-16-T70 T55 (107-16(L100)-T55) 107-16(L100)-T55 T60 (107-16(L100)-T60) 107-16(L100)-T60 T70 (107-16(L100)-T70) 107-16(L100)-T70 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Hex Impact Bit, 16mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. Check the shank size against your bit holder before ordering. A hex impact bit with a 16mm hex shank for large socket head cap screws. It is used in matching impact bit holders on trucks, heavy equipment and machinery, where these screws are run with an impact wrench. Key Features 16mm hex shank fits matching impact bit holders Metric hex sizes as listed for each model Use only with impact-rated holders and drivers Specifications Size / Spec Part No. 10mm 107-16-10 12mm 107-16-12 13mm 107-16-13 14mm 107-16-14 16mm 107-16-16 17mm 107-16-17 18mm 107-16-18 19mm 107-16-19 22mm 107-16-22 5/8″ 107-16-5/8 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Long Torx Impact Bit, 11mm Hex Shank — 107-11-L80-T45, genuine KOKEN tool supplied through the official Korean importer. 11mm hex shank does not fit 7/16" or 1/4" hex holders. A long Torx impact bit with an 11mm hex shank, used in matching impact bit holders. It reaches recessed Torx fasteners on vehicles and machinery, where a short bit and holder cannot get in. Key Features 11mm hex shank fits matching impact bit holders Long reach for fasteners set in deep recesses T sizes as listed for each model Specifications Spec Part No. T45 107-11-L80-T45 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Long Triple Square (XZN) Impact Bit, 11mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. 11mm hex shank does not fit 7/16" or 1/4" hex holders. A long impact bit with an 11mm hex shank for matching impact bit holders. The extra length reaches recessed triple square and Torx fasteners on vehicles and machinery, as listed for each model. Key Features 11mm hex shank fits matching impact bit holders Long reach for fasteners set in deep recesses Tip types and sizes as listed for each model Specifications Size / Spec Part No. M12 107-11-L80-M12 T50 107-11-L80-T50 T30 107-11-L80-T30 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less

KOKEN Long Hex Impact Bit, 11mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. 11mm hex shank does not fit 7/16" or 1/4" hex holders. A long hex impact bit with an 11mm hex shank, used in matching impact bit holders. It reaches recessed socket head cap screws on vehicles and machinery with an impact wrench. Key Features 11mm hex shank fits matching impact bit holders Long reach for screws set in deep recesses Metric hex sizes as listed for each model Specifications Size / Spec Part No. 4mm 107-11-L80-4 5mm 107-11-L80-5 6mm 107-11-L80-6 7mm 107-11-L80-7 8mm 107-11-L80-8 10mm 107-11-L80-10 12mm 107-11-L80-12 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

KOKEN Torx Impact Bit, 11mm Hex Shank — 107 series, genuine KOKEN tool supplied through the official Korean importer. 11mm hex shank does not fit 7/16" or 1/4" hex holders. A Torx impact bit with an 11mm hex shank, used in matching impact bit holders. It drives larger Torx fasteners on vehicles and machinery with an impact wrench, where a 1/4" hex bit would be too small. Key Features 11mm hex shank fits matching impact bit holders T sizes as listed for each model Use only with impact-rated holders and drivers Specifications Size / Spec Part No. T30 107-11-L35-T30 T40 107-11-L35-T40 T40 (107-11-L80-T40) 107-11-L80-T40 About KOKENKo-ken (Yamashita Kogyosho) is a Japanese maker of sockets, ratchets, bit sockets and impact sockets, widely used in automotive and industrial maintenance.Ordering & Shipping Genuine product sourced through the official Korean importer Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request Lead time: please inquire for sizes not in stock

Read more less