Measuring & Test

BLUETEC Digital Spirit Level 200 mmA digital level reads the angle as a number as well as showing the bubble, so a slope can be set to a stated fall rather than judged by eye.Key Features Reads degrees, percent and mm/m — set a fall instead of guessing it Hold and reverse functions let one person transfer an angle The vials still work when the battery does not Specifications Size 200 Measuring Range 4x90 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Inclinometer BD-202BBAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Available Sizes 4x90 (BD-202BB) 4X90 (BD-202VA) Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Measuring Range 4x90 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Mini Spirit Level 70–200 mmA box-section aluminium level is the site standard: the deeper the body, the stiffer it stays over its length, and stiffness is what keeps a long level honest.Available Sizes 70 mm, 1 vial (BD-ML70) 130 mm, 3 vials (BD-ML100) 200 mm, 3 vials (BD-ML200) Key Features Box section resists the twist that puts a long level out Milled base is the reference face — protect it, it decides the reading Check by reversing on the same surface; the bubble should read the same both ways Specifications Size 70 Vials 1 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Inclinometer BT-365FAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Measuring Range 2x180 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Angle Finder, AluminiumAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Available Sizes 0–999.9, 0.1 graduation, 200 × 200 mm arms (BT-AL200) 0–999.9, 0.1 graduation, 300 × 300 mm arms (BT-AL300) 0–999.9, 0.1 graduation, 200 × 200 mm arms (BT-BL200) Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Measuring Range 0~999.9 Graduation 0.1 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Inclinometer BD-413WPAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Measuring Range 4x90 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Spirit Level, Magnetic 400–1000 mmA digital level reads the angle as a number as well as showing the bubble, so a slope can be set to a stated fall rather than judged by eye.Available Sizes 400 mm (16"), 1 vial (BDM-400) 600 mm (24"), 2 vials (BDM-600) 800 mm (32"), 2 vials (BDM-800) 1000 mm (40"), 2 vials (BDM-1000) Key Features Reads degrees, percent and mm/m — set a fall instead of guessing it Hold and reverse functions let one person transfer an angle The vials still work when the battery does not Specifications Size 400 Vials 1 Nominal (inch) 16 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Spirit Level 400–1000 mmA digital level reads the angle as a number as well as showing the bubble, so a slope can be set to a stated fall rather than judged by eye.Available Sizes 400 mm (16"), 1 vial (BDS-400) 600 mm (24"), 2 vials (BDS-600) 1000 mm (40"), 2 vials (BDS-1000) Key Features Reads degrees, percent and mm/m — set a fall instead of guessing it Hold and reverse functions let one person transfer an angle The vials still work when the battery does not Specifications Size 400 Vials 1 Nominal (inch) 16 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Inclinometer BD-202SAAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Available Sizes 2x180 (BD-202SA) 2x180 (BD-202LA) Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Measuring Range 2x180 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital InclinometerAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Measuring Range 4x90 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Angle Finder 254–485 mmAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Available Sizes 254 mm, 0–225, 0.05 graduation (BD-302W) 415 mm, 0–225, 0.1 graduation (BD-400W) 485 mm, 0–225, 0.05 graduation (BD-450WS) Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Size 254 Measuring Range 0~225 Graduation 0.05 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Digital Angle FinderAn angle finder measures the angle between two surfaces directly — for cutting a mitre to a wall that is not square, or checking a machine head.Available Sizes 0–999.9, 0.1 graduation, 200 × 200 mm arms (BD-DR200) 0–999.9, 0.1 graduation, 300 × 300 mm arms (BD-DR300) 0–999.9, 0.1 graduation, 500 × 500 mm arms (BD-DR500) 0–999.9, 0.1 graduation, 200 × 200 mm arms (BD-PL200) Key Features Reads the actual angle rather than assuming 90° Zero it on a known face before measuring For mitres, remember the cut is half the measured angle Specifications Measuring Range 0~999.9 Graduation 0.1 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Multi-Purpose LevelMulti-Purpose Level supplied by BLUETEC, sourced through official Korean distribution.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Circular Bubble LevelA bull's-eye or replacement vial reads level in two axes at once, built into a base or fitted to equipment.Key Features Reads both axes from one bubble Sized to the recess it fits — check the diameter and height Sensitivity varies widely; match it to the job Specifications Height (mm) 13 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torpedo Level, Magnetic 230 mmA torpedo level is short enough to sit inside a stud bay or on a pipe run, with a magnetic edge so it stays put on steel while both hands work.Available Sizes 230 mm (9"), 3 vials (230 PVC) 230 mm (9"), 3 vials (230 AL) Key Features Fits where a full-length level will not Magnetic edge holds on conduit, steel stud and pipe Usually carries a 45° vial as well as level and plumb Specifications Size 230 Vials 3 Nominal (inch) 9 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Cast Iron Machinist's Level, Magnetic 250 mmA machinist's level is a ground cast-iron block with a precision vial — it sets a machine bed or a shaft to a fraction of a millimetre per metre, which no builder's level can do.Key Features Ground base and a high-sensitivity vial — an order finer than a site level Read it on a clean, wiped surface; a chip of swarf under the base is the whole error Reverse the level end-for-end and average the two readings to cancel its own error Specifications Size 250 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Aluminium Spirit Level, Magnetic 300–2000 mmA box-section aluminium level is the site standard: the deeper the body, the stiffer it stays over its length, and stiffness is what keeps a long level honest.Available Sizes 300 mm (12"), 3 vials 400 mm (16"), 3 vials 600 mm (24"), 3 vials 1000 mm (40"), 3 vials 1200 mm (48"), 3 vials 450 mm (18"), 3 vials 1500 mm (60"), 3 vials 2000 mm (80"), 3 vials 900 mm (36"), 3 vials Key Features Box section resists the twist that puts a long level out Milled base is the reference face — protect it, it decides the reading Check by reversing on the same surface; the bubble should read the same both ways Specifications Size 300 Vials 3 Nominal (inch) 12 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Aluminium Spirit Level 300–2000 mmA box-section aluminium level is the site standard: the deeper the body, the stiffer it stays over its length, and stiffness is what keeps a long level honest.Available Sizes 300 mm (12"), 3 vials 400 mm (16"), 3 vials 600 mm (24"), 3 vials 1000 mm (40"), 3 vials 450 mm (18"), 3 vials 1200 mm (48"), 3 vials 1500 mm (60"), 3 vials 2000 mm (80"), 3 vials 900 mm (36"), 3 vials Key Features Box section resists the twist that puts a long level out Milled base is the reference face — protect it, it decides the reading Check by reversing on the same surface; the bubble should read the same both ways Specifications Size 300 Vials 3 Nominal (inch) 12 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

DAIHAN Scientific Infrared ThermometerInfrared Thermometer supplied by DAIHAN Scientific, sourced through official Korean distribution.About DAIHAN ScientificDAIHAN Scientific of Wonju, Korea builds laboratory equipment under its Wise series — stirrers, hotplates, baths, ovens and ultrasonic cleaners — and supplies the glassware and consumables that go with them, including German DURAN borosilicate.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.OHAUS Portable Scale 200 g–5 kgPortable Scale 200 g–5 kg supplied by OHAUS, sourced through official Korean distribution.Available Sizes 200 g × 0.1 g, 145 × 133 mm pan (CSG201F) 600 g × 0.1 g, 145 × 133 mm pan (CSG601F) 2 kg × 1 g, 145 × 133 mm pan (CSG2000F) 5 kg × 1 g, 145 × 133 mm pan (CSG5000F) Specifications Pan Size 145 × 133 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About OHAUSOHAUS Corporation has made balances in New Jersey since 1907 and is now part of the Mettler-Toledo group. Its laboratory and industrial scales are a fixture of school labs and QC benches worldwide.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.OHAUS Counting Bench Scale 30 kg–300 kgA bench scale is the general-purpose industrial scale — a stainless pan on a load cell, sized to sit on a workbench and weigh what is put on it.Available Sizes 30 kg × 5 g, 350 × 300 mm pan (D24PE30FRKR) 60 kg × 10 g, 500 × 400 mm pan (D24PE60FLKR) 150 kg × 20 g, 500 × 400 mm pan (D24PE150FLKR) 300 kg × 50 g, 600 × 500 mm pan (D24PE300FXKR) Key Features Stainless pan on a single load cell Capacity and graduation are the two numbers that matter; the rest is convenience Level it with the feet and bubble before trusting a reading Specifications Pan Size 350 × 300 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About OHAUSOHAUS Corporation has made balances in New Jersey since 1907 and is now part of the Mettler-Toledo group. Its laboratory and industrial scales are a fixture of school labs and QC benches worldwide.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.OHAUS Digital Counting Scale 3 kg–30 kgA counting scale weighs one piece, then reports how many pieces are on the pan. Accuracy depends entirely on how consistent the parts are and how good the sample count was.Available Sizes 3 kg × 0.5 g, 294 × 226 mm pan (RC11P3KR) 15 kg × 2 g, 294 × 226 mm pan (RC11P15KR) 30 kg × 5 g, 294 × 226 mm pan (RC11P30KR) Key Features Sample a larger count for small, variable parts — ten pieces is rarely enough Piece weight is stored, so repeat counts of the same part are one keypress Not a substitute for weighing when the parts vary in mass Specifications Pan Size 294 × 226 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About OHAUSOHAUS Corporation has made balances in New Jersey since 1907 and is now part of the Mettler-Toledo group. Its laboratory and industrial scales are a fixture of school labs and QC benches worldwide.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.OHAUS Digital Bench Scale, Washdown 3 kg–30 kgA washdown scale has a sealed stainless housing so it can be hosed down — the standard choice for food, fish and wet processing.Available Sizes 3 kg × 0.5 g, 190 × 242 mm pan (V22PWE3KR) 6 kg × 1 g, 190 × 242 mm pan (V22PWE6KR) 15 kg × 2 g, 190 × 242 mm pan (V22PWE15KR) 30 kg × 5 g, 190 × 242 mm pan (V22PWE30KR) Key Features Stainless pan and sealed housing take a direct wash Check the IP rating against how it will actually be cleaned Seals are consumable; inspect them if the scale lives under a hose Specifications Pan Size 190 × 242 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About OHAUSOHAUS Corporation has made balances in New Jersey since 1907 and is now part of the Mettler-Toledo group. Its laboratory and industrial scales are a fixture of school labs and QC benches worldwide.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

A&D Infrared Thermometer AD-5614A digital thermometer for kitchen, cold-store and process checks, sold alongside scales because the same rooms need both.Key Features Reads in seconds and holds the value Check the range against what you actually measure Probe types are for spot checks, not permanent immersion Specifications Measuring Range 60~500 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

A&D Infrared ThermometerA digital thermometer for kitchen, cold-store and process checks, sold alongside scales because the same rooms need both.Key Features Reads in seconds and holds the value Check the range against what you actually measure Probe types are for spot checks, not permanent immersion Specifications Measuring Range 200~1/500 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

CAS Thermo-hygrometerA digital thermometer for kitchen, cold-store and process checks, sold alongside scales because the same rooms need both.Key Features Reads in seconds and holds the value Check the range against what you actually measure Probe types are for spot checks, not permanent immersion About CASCAS Corporation is Korea's largest scale maker, founded in 1983 and listed on KOSDAQ. It developed Korea's first domestic load cell in 1989 and still makes its own, which is why its bench and crane scales are the default in Korean industry.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.CAS Pocket Scale 200 gPocket Scale 200 g supplied by CAS, sourced through official Korean distribution.Specifications Size 95 × 95 × 20 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About CASCAS Corporation is Korea's largest scale maker, founded in 1983 and listed on KOSDAQ. It developed Korea's first domestic load cell in 1989 and still makes its own, which is why its bench and crane scales are the default in Korean industry.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.CAS Crane Scale 25 kg–150 kgA crane scale hangs between the hook and the load and reads the weight while it is in the air, which is the only practical way to weigh something already slung.Available Sizes 25 kg × 100 g (25kg) 50 kg × 200 g (50kg) 100 kg × 400 g (100kg) 150 kg × 500 g (150kg) Key Features Reads in the air — no platform, no setting the load down Shackle and hook are rated well above the display capacity, but check the rating that matters for your lift Overload and drop shock are what kill these; treat the rated capacity as a hard limit About CASCAS Corporation is Korea's largest scale maker, founded in 1983 and listed on KOSDAQ. It developed Korea's first domestic load cell in 1989 and still makes its own, which is why its bench and crane scales are the default in Korean industry.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.Freight item — quote required. Scales of this capacity ship as freight rather than parcel: floor and pallet scales are steel decks weighing hundreds of kilograms, and crane scales of this class travel crated with their shackle and remote. Online checkout is disabled for them. Message us with your destination and we will quote air or sea freight, including crating and delivery to a commercial address.Bulky item — freight quote required. This item is light for its size, so couriers bill it on volumetric weight (length × width × height ÷ 5000), which runs into the hundreds of kilograms. It cannot be sent by standard parcel service and online checkout is disabled for it. Message us with your destination and we will quote air or sea freight.CAS Crane Scale 1 t–5 tA crane scale hangs between the hook and the load and reads the weight while it is in the air, which is the only practical way to weigh something already slung.Available Sizes 2 t × 1 kg (2E) 1 t × 0.5 kg (1E) 5 t × 2 kg (5E) Key Features Reads in the air — no platform, no setting the load down Shackle and hook are rated well above the display capacity, but check the rating that matters for your lift Overload and drop shock are what kill these; treat the rated capacity as a hard limit About CASCAS Corporation is Korea's largest scale maker, founded in 1983 and listed on KOSDAQ. It developed Korea's first domestic load cell in 1989 and still makes its own, which is why its bench and crane scales are the default in Korean industry.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.Freight item — quote required. Scales of this capacity ship as freight rather than parcel: floor and pallet scales are steel decks weighing hundreds of kilograms, and crane scales of this class travel crated with their shackle and remote. Online checkout is disabled for them. Message us with your destination and we will quote air or sea freight, including crating and delivery to a commercial address.Bulky item — freight quote required. This item is light for its size, so couriers bill it on volumetric weight (length × width × height ÷ 5000), which runs into the hundreds of kilograms. It cannot be sent by standard parcel service and online checkout is disabled for it. Message us with your destination and we will quote air or sea freight.A&D Pallet Scale 1 t–2 tA floor or pallet scale takes the load at ground level so a pallet truck can drive on, which is how goods-in weighs a pallet without a crane.Available Sizes 1 t × 0.5 kg (APS-T001) 2 t × 1 kg (APS-T002) Key Features Low profile — a pallet truck rolls straight on Needs a flat, solid floor; a twisted platform reads high on one corner Ships as freight and usually needs unloading equipment on site About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Trolley Scale 60 kgTrolley Scale 60 kg supplied by A&D, sourced through official Korean distribution.Specifications Pan Size 424 × 330 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.CAS Precision Balance 120 g–320 gA precision balance resolves to a fraction of a milligram, which means it reacts to draughts, vibration and a warm hand as readily as to the sample.Available Sizes 120 g × 0.0001 g, 91 pan (CATX124) 220 g × 0.0001 kg, 91 pan (CATX224) 320 g × 0.0001 kg, 91 pan (CATX324) Key Features Needs a level, solid bench away from doors and air conditioning Let it warm up and re-zero before a run that matters Calibrate against a known class weight, not against another balance Specifications Pan Size 91 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About CASCAS Corporation is Korea's largest scale maker, founded in 1983 and listed on KOSDAQ. It developed Korea's first domestic load cell in 1989 and still makes its own, which is why its bench and crane scales are the default in Korean industry.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.CAS Kitchen Scale 1 kg–6 kgKitchen Scale 1 kg–6 kg supplied by CAS, sourced through official Korean distribution.Available Sizes 1 kg × 0.1 g, 178 × 120 mm pan (WZ-3A) 3/6 kg kg × 1/2 g, 210 × 160 mm pan (WZ-2D) Specifications Pan Size 178 × 120 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About CASCAS Corporation is Korea's largest scale maker, founded in 1983 and listed on KOSDAQ. It developed Korea's first domestic load cell in 1989 and still makes its own, which is why its bench and crane scales are the default in Korean industry.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.CAS Digital Bench Scale, Washdown 3 kg–30 kgA washdown scale has a sealed stainless housing so it can be hosed down — the standard choice for food, fish and wet processing.Available Sizes 15/30 kg × 5/10 g, 237 × 192 mm pan (SWII-CW) 1.5/3 kg × 0.5/1 g, 237 × 192 mm pan (SWII-CW) 3/6 kg × 1/2 g, 237 × 192 mm pan (SWII-CW) 6/15 kg × 2/5 g, 237 × 192 mm pan (SWII-CW) Key Features Stainless pan and sealed housing take a direct wash Check the IP rating against how it will actually be cleaned Seals are consumable; inspect them if the scale lives under a hose Specifications Pan Size 237 × 192 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About CASCAS Corporation is Korea's largest scale maker, founded in 1983 and listed on KOSDAQ. It developed Korea's first domestic load cell in 1989 and still makes its own, which is why its bench and crane scales are the default in Korean industry.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Digital Platform Bench Scale 30 kg–200 kg SAII-30KA bench scale is the general-purpose industrial scale — a stainless pan on a load cell, sized to sit on a workbench and weigh what is put on it.Available Sizes 15/30 kg × 5/10 g, 355 × 427 mm pan (SAII-30K) 30/60 kg × 10/20 g, 355 × 427 mm pan (SAII-60K) 60/150 kg × 20/50 g, 355 × 427 mm pan (SAII-150K) 100/200 kg × 50/100 g, 355 × 427 mm pan (SAII-200K) Key Features Stainless pan on a single load cell Capacity and graduation are the two numbers that matter; the rest is convenience Level it with the feet and bubble before trusting a reading Specifications Pan Size 355 × 427 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

A&D Moisture Analyser 51 gA precision balance resolves to a fraction of a milligram, which means it reacts to draughts, vibration and a warm hand as readily as to the sample.Key Features Needs a level, solid bench away from doors and air conditioning Let it warm up and re-zero before a run that matters Calibrate against a known class weight, not against another balance Specifications Pan Size 85 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.Freight item — quote required. Scales of this capacity ship as freight rather than parcel: floor and pallet scales are steel decks weighing hundreds of kilograms, and crane scales of this class travel crated with their shackle and remote. Online checkout is disabled for them. Message us with your destination and we will quote air or sea freight, including crating and delivery to a commercial address.Bulky item — freight quote required. This item is light for its size, so couriers bill it on volumetric weight (length × width × height ÷ 5000), which runs into the hundreds of kilograms. It cannot be sent by standard parcel service and online checkout is disabled for it. Message us with your destination and we will quote air or sea freight.A&D Floor Platform Scale 1 t–2 tA floor or pallet scale takes the load at ground level so a pallet truck can drive on, which is how goods-in weighs a pallet without a crane.Available Sizes 1 t × 200 g (1000K) 2 t × 500 g (2000K) Key Features Low profile — a pallet truck rolls straight on Needs a flat, solid floor; a twisted platform reads high on one corner Ships as freight and usually needs unloading equipment on site About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.Freight item — quote required. Scales of this capacity ship as freight rather than parcel: floor and pallet scales are steel decks weighing hundreds of kilograms, and crane scales of this class travel crated with their shackle and remote. Online checkout is disabled for them. Message us with your destination and we will quote air or sea freight, including crating and delivery to a commercial address.Bulky item — freight quote required. This item is light for its size, so couriers bill it on volumetric weight (length × width × height ÷ 5000), which runs into the hundreds of kilograms. It cannot be sent by standard parcel service and online checkout is disabled for it. Message us with your destination and we will quote air or sea freight.A&D Crane Scale 100 kg–500 kgA crane scale hangs between the hook and the load and reads the weight while it is in the air, which is the only practical way to weigh something already slung.Available Sizes 100 kg × 0.05 kg (FJ-K100i) 200 kg × 0.1 kg (FJ-K200i) 250/500 kg × 0.1/0.2 kg (FJ-K500i) Key Features Reads in the air — no platform, no setting the load down Shackle and hook are rated well above the display capacity, but check the rating that matters for your lift Overload and drop shock are what kill these; treat the rated capacity as a hard limit About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Digital Bench Scale 300 g–3 kgA bench scale is the general-purpose industrial scale — a stainless pan on a load cell, sized to sit on a workbench and weigh what is put on it.Available Sizes 300 g × 0.1 g, 128 × 128 mm pan (HL-300WP) 1 kg × 0.5 g, 128 × 128 mm pan (HL-1000WP) 2 kg × 1 g, 128 × 128 mm pan (HL-2000WP) 3 kg × 1 g, 128 × 128 mm pan (HL-3000WP) Key Features Stainless pan on a single load cell Capacity and graduation are the two numbers that matter; the rest is convenience Level it with the feet and bubble before trusting a reading Specifications Pan Size 128 × 128 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Explosion-Proof Bench Scale 15 kg–220 kgAn explosion-proof scale is certified for use where flammable vapour or dust may be present — paint shops, solvent stores, mills.Available Sizes 3/6/15 kg × 1/2/5 g, 250 × 250 mm pan (HW-15KCEP) 15/30/60 kg × 5/10/20 g, 330 × 424 mm pan (HW-60KCEP) 60/150/220 kg × 20/50/100 g, 390 × 530 mm pan (HW-200KCEP) Key Features Certified for hazardous areas; the certification is what you are paying for Confirm the zone and gas group your site requires before ordering Never substitute a standard scale in a rated area Specifications Pan Size 250 × 250 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Precision Balance 120 g–12 kgA precision balance resolves to a fraction of a milligram, which means it reacts to draughts, vibration and a warm hand as readily as to the sample.Available Sizes 120 g × 0.01 g, 110 pan (CB-120) 200 g × 0.01 g, 110 pan (CB-200) 300 g × 0.01 g, 110 pan (CB-310) 600 g × 0.1 g, 133 × 170 mm pan (CB-600) 1.2 kg × 0.1 g, 133 × 170 mm pan (CB-1200) 2 kg × 0.1 g, 133 × 170 mm pan (CB-2000) 3 kg × 0.1 g, 133 × 170 mm pan (CB-3100) 6 kg × 1 g, 133 × 170 mm pan (CB-6000) 12 kg × 1 g, 133 × 170 mm pan (CB-12K) Key Features Needs a level, solid bench away from doors and air conditioning Let it warm up and re-zero before a run that matters Calibrate against a known class weight, not against another balance Specifications Pan Size 110 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Precision Balance 400 g–6 kgA precision balance resolves to a fraction of a milligram, which means it reacts to draughts, vibration and a warm hand as readily as to the sample.Available Sizes 400 g × 0.01 g, 110 pan (EK-410i) 600 g × 0.01 g, 110 pan (EK-610i) 4 kg × 0.1 g, 133 × 170 mm pan (EK-4100i) 6 kg × 0.1 g, 133 × 170 mm pan (EK-6100i) Key Features Needs a level, solid bench away from doors and air conditioning Let it warm up and re-zero before a run that matters Calibrate against a known class weight, not against another balance Specifications Pan Size 110 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Digital Bench Scale 310 g–5.1 kgA bench scale is the general-purpose industrial scale — a stainless pan on a load cell, sized to sit on a workbench and weigh what is put on it.Available Sizes 510 g × 0.1 g, 132 × 130 mm pan (NEW KC-500) KB/KC/HC/CB/FG universal(7.5V) (AC Adapter) 310 g × 0.1 g, 132 × 130 mm pan (NEW KC-300) 3.1 kg × 1 g, 132 × 130 mm pan (NEW KC-3000) 5.1 kg × 1 g, 132 × 130 mm pan (NEW KC-5000) Key Features Stainless pan on a single load cell Capacity and graduation are the two numbers that matter; the rest is convenience Level it with the feet and bubble before trusting a reading Specifications Pan Size 132 × 130 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.Freight item — quote required. Scales of this capacity ship as freight rather than parcel: floor and pallet scales are steel decks weighing hundreds of kilograms, and crane scales of this class travel crated with their shackle and remote. Online checkout is disabled for them. Message us with your destination and we will quote air or sea freight, including crating and delivery to a commercial address.Bulky item — freight quote required. This item is light for its size, so couriers bill it on volumetric weight (length × width × height ÷ 5000), which runs into the hundreds of kilograms. It cannot be sent by standard parcel service and online checkout is disabled for it. Message us with your destination and we will quote air or sea freight.A&D Crane Scale 1 t–5 tA crane scale hangs between the hook and the load and reads the weight while it is in the air, which is the only practical way to weigh something already slung.Available Sizes 1 t × 0.2 kg (NEW TC-1t) 2.5 t × 0.5 kg (NEW TC-2.5t) 5 t × 1 kg (NEW TC-5t) Key Features Reads in the air — no platform, no setting the load down Shackle and hook are rated well above the display capacity, but check the rating that matters for your lift Overload and drop shock are what kill these; treat the rated capacity as a hard limit About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.Freight item — quote required. Scales of this capacity ship as freight rather than parcel: floor and pallet scales are steel decks weighing hundreds of kilograms, and crane scales of this class travel crated with their shackle and remote. Online checkout is disabled for them. Message us with your destination and we will quote air or sea freight, including crating and delivery to a commercial address.Bulky item — freight quote required. This item is light for its size, so couriers bill it on volumetric weight (length × width × height ÷ 5000), which runs into the hundreds of kilograms. It cannot be sent by standard parcel service and online checkout is disabled for it. Message us with your destination and we will quote air or sea freight.A&D Crane Scale 1 t–10 tA crane scale hangs between the hook and the load and reads the weight while it is in the air, which is the only practical way to weigh something already slung.Available Sizes 1 t × 0.5 kg (NEW TB-1t) 2.5 t × 1 kg (NEW TB-2.5t) 5 t × 2 kg (NEW TB-5t) 10 t × 5 kg (NEW TB-10t) NEW-TB for (Adapter) Key Features Reads in the air — no platform, no setting the load down Shackle and hook are rated well above the display capacity, but check the rating that matters for your lift Overload and drop shock are what kill these; treat the rated capacity as a hard limit About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Digital Platform Bench Scale 30 kg–200 kgA bench scale is the general-purpose industrial scale — a stainless pan on a load cell, sized to sit on a workbench and weigh what is put on it.Available Sizes 30 kg × 5 g, 380 × 300 mm pan (N FC-30K) 60 kg × 10 g, 390 × 530 mm pan (N FC-60K) 100 kg × 20 g, 390 × 530 mm pan (N FC-100K) 200 kg × 50 g, 390 × 530 mm pan (N FC-200K) Key Features Stainless pan on a single load cell Capacity and graduation are the two numbers that matter; the rest is convenience Level it with the feet and bubble before trusting a reading Specifications Pan Size 380 × 300 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Digital Counting Scale 3 kg–30 kgA counting scale weighs one piece, then reports how many pieces are on the pan. Accuracy depends entirely on how consistent the parts are and how good the sample count was.Available Sizes 3 kg × 0.5 g, 310 × 210 mm pan (HC-3Ki) 6 kg × 1 g, 310 × 210 mm pan (HC-6Ki) 15 kg × 2 g, 310 × 210 mm pan (HC-15Ki) 30 kg × 5 g, 310 × 210 mm pan (HC-30Ki) Key Features Sample a larger count for small, variable parts — ten pieces is rarely enough Piece weight is stored, so repeat counts of the same part are one keypress Not a substitute for weighing when the parts vary in mass Specifications Pan Size 310 × 210 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Approved for trade use in Korea only. These are Korean type-approved instruments. Using a scale to buy or sell goods by weight normally requires approval in the country of use — NTEP in the United States, MID/OIML in Europe — which these models do not carry. They are supplied for internal weighing, production and inspection use. Ask us before ordering if you need a legal-for-trade instrument.A&D Digital Checkweighing Scale 3 kg–30 kgA checkweighing scale is set with an upper and lower limit and tells the operator under / OK / over at a glance, so a line can be checked without reading numbers.Available Sizes 3 kg × 0.5 g, 310 × 210 mm pan (HC-3KW) 6 kg × 1 g, 310 × 210 mm pan (HC-6KW) 15 kg × 2 g, 310 × 210 mm pan (HC-15KW) 30 kg × 5 g, 310 × 210 mm pan (HC-30KW) Key Features Set high and low limits once; the display does the judging Meant for repeat checks at speed rather than one-off measurement Specifications Pan Size 310 × 210 mm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About A&DA&D Company, Limited has built weighing and measuring instruments in Tokyo since 1977 — the name is short for analog-to-digital, the conversion technology the company was founded on. Its range runs from analytical balances to crane scales.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less