Products

PLD seriesAmplifier built-in type Photoelectric Sensors - 2M long distance detection by applying double layer structure lens- Stable light ON indicator (green)- Built in sensitivity adjustment function Model PLD-R2N PLD-R2P Appearance Sensing Type Diffuse - reflective Sensing distance 2m Detecting object White non-glossy paper (200x200 ㎜) Power voltage 12 - 24 V d.c. ±10 % Power consumption Max. 30 ㎃ d.c. Control output • NPN open collector Max. 150 mA d.c. (resistance load) • Residual voltage: 1 V d.c. Below • PNP open collector Max. 150 mA d.c. (resistance load) • Residual voltage: 1 V d.c. Below Operation mode Light On mode Response time Max. 1 ms Hysteresis Within 20 % of detectable distance Light source (wavelength) Infrared LED (850 nm) LED Indicator • Control output : Red LED • Safety : green LED Sensitivity adjustment 'Built-in' sensitivity adjustment V/R (220。degree spin V/R) Protection circuit Reverse polarity protection, overcurrent protection Ambient intensity of illumination • Sunlight: max. 11000 Lux, • Incandescent lamp: max. 3000 Lux Ambient temperature & humidity • When operating: -20 ~ 60 ℃, • when maintaining: -25 ~ 70 ℃, max. 35 ~ 85 % RH (without freezing) Degree of protection IP64 (IEC 60529) Insulating resistance 20 ㏁ or more (based on 500Vd.c. mega) Dielectric strength 1000 V a.c. for 1 min Vibration resistance 10-55 ㎐ double amplitude 1.5mm, X,Y,Z each direction for 2 hours Shock resistance 500 m/s² X·Y·Z each direction for 3 times Connection method • Cable pull-out typed • Number of wires: 3P • Outer diameter: Ø3 ㎜ • Length: 2 m Material • Case: PET • Lens cap: PC • Lens : PMMA Cable 3P (26 AWG), length : 2 m Accessories Sensitivity adjusting driver, Fixing volt (3-M3 X 17L) Certification Weight 60g

Read more less

PN seriesVoltage output type Photoelectric Sensors - Attached motion display light- Built in output cutoff protecting circuit- Attached sensitivity adjustment volume- Selection of output operation due to control line- Built in reverse connection of power protecting circuit Model PN-T3 PN-M1 PN-R02 Appearance Sensing method Throug beam Retro reflection Diffuse reflection Sensing distance 3 m 0.1-1 m 200 ㎜ Sensing object Opaque object above Ø8 ㎜ Opaque object above Ø60 ㎜ White paper with no gloss 200 x 200 Power supply voltage 12 - 24 V d.c. (±10 %) Current consumption Emitter 20 ㎃ d.c. 30 ㎃ d.c. max Receiver 18 ㎃ d.c Control output NPN voltage output, Less than 200 ㎃ (Load voltage : 30 V d.c.), Remaining voltage : 1 V d.c. max Output action Selection of L. ON/D. by the control line (Through beam is only with the receiver) Response time 3 ㎳ max Hysteresis - less than 20% of the sensing distance Light source (wave length) Infrared lightening LED (850 ㎚) LED Control output indicator : Red LED (But emitter of the through beam indicates the power with red LED) Sensitivity adjustment By the sensitivity adjusting volume (Exclude the emitter of through beam type) Protective circuit Power reverse connection protecting circuit and output break protecting circuit Ambient illumination Sunlight: max 11,000 Lux, incandescent lamp : max 3,000 Lux Ambient temperature Operating : -25 ~ 55 ℃, Storage: -40 ~ 70 ℃,(Without condensation) Ambient humidity 35 ~ 85 % R.H. (With no condensation) Insulation resistance 20 ㏁ min(500 V d.c.) Dielectric strength 1,000 V a.c. for 1 min Vibration resistance 10 - 55 ㎐ double amplitude : 1.5 ㎜, for 2 hours each in X·Y and Z direction Shock resistance 500 m/s², 3 times each in X·Y and Z directions Connection method Cable extended, Cable : 4P, Diameter Ø4 ㎜, Length : 1.5 m(but transmitter is 3P) Material Case and lens : PC Weight Approx. 250g (included the weight of box) Approx. 150g (included the weight of box) Approx. 100g (included the weight of box)

Read more less

PN seriesVoltage output type Photoelectric Sensors - Attached motion display light- Built in output cutoff protecting circuit- Attached sensitivity adjustment volume- Selection of output operation due to control line- Built in reverse connection of power protecting circuit Model PN-T3 PN-M1 PN-R02 Appearance Sensing method Throug beam Retro reflection Diffuse reflection Sensing distance 3 m 0.1-1 m 200 ㎜ Sensing object Opaque object above Ø8 ㎜ Opaque object above Ø60 ㎜ White paper with no gloss 200 x 200 Power supply voltage 12 - 24 V d.c. (±10 %) Current consumption Emitter 20 ㎃ d.c. 30 ㎃ d.c. max Receiver 18 ㎃ d.c Control output NPN voltage output, Less than 200 ㎃ (Load voltage : 30 V d.c.), Remaining voltage : 1 V d.c. max Output action Selection of L. ON/D. by the control line (Through beam is only with the receiver) Response time 3 ㎳ max Hysteresis - less than 20% of the sensing distance Light source (wave length) Infrared lightening LED (850 ㎚) LED Control output indicator : Red LED (But emitter of the through beam indicates the power with red LED) Sensitivity adjustment By the sensitivity adjusting volume (Exclude the emitter of through beam type) Protective circuit Power reverse connection protecting circuit and output break protecting circuit Ambient illumination Sunlight: max 11,000 Lux, incandescent lamp : max 3,000 Lux Ambient temperature Operating : -25 ~ 55 ℃, Storage: -40 ~ 70 ℃,(Without condensation) Ambient humidity 35 ~ 85 % R.H. (With no condensation) Insulation resistance 20 ㏁ min(500 V d.c.) Dielectric strength 1,000 V a.c. for 1 min Vibration resistance 10 - 55 ㎐ double amplitude : 1.5 ㎜, for 2 hours each in X·Y and Z direction Shock resistance 500 m/s², 3 times each in X·Y and Z directions Connection method Cable extended, Cable : 4P, Diameter Ø4 ㎜, Length : 1.5 m(but transmitter is 3P) Material Case and lens : PC Weight Approx. 250g (included the weight of box) Approx. 150g (included the weight of box) Approx. 100g (included the weight of box)

Read more less

PN seriesVoltage output type Photoelectric Sensors - Attached motion display light- Built in output cutoff protecting circuit- Attached sensitivity adjustment volume- Selection of output operation due to control line- Built in reverse connection of power protecting circuit Model PN-T3 PN-M1 PN-R02 Appearance Sensing method Throug beam Retro reflection Diffuse reflection Sensing distance 3 m 0.1-1 m 200 ㎜ Sensing object Opaque object above Ø8 ㎜ Opaque object above Ø60 ㎜ White paper with no gloss 200 x 200 Power supply voltage 12 - 24 V d.c. (±10 %) Current consumption Emitter 20 ㎃ d.c. 30 ㎃ d.c. max Receiver 18 ㎃ d.c Control output NPN voltage output, Less than 200 ㎃ (Load voltage : 30 V d.c.), Remaining voltage : 1 V d.c. max Output action Selection of L. ON/D. by the control line (Through beam is only with the receiver) Response time 3 ㎳ max Hysteresis - less than 20% of the sensing distance Light source (wave length) Infrared lightening LED (850 ㎚) LED Control output indicator : Red LED (But emitter of the through beam indicates the power with red LED) Sensitivity adjustment By the sensitivity adjusting volume (Exclude the emitter of through beam type) Protective circuit Power reverse connection protecting circuit and output break protecting circuit Ambient illumination Sunlight: max 11,000 Lux, incandescent lamp : max 3,000 Lux Ambient temperature Operating : -25 ~ 55 ℃, Storage: -40 ~ 70 ℃,(Without condensation) Ambient humidity 35 ~ 85 % R.H. (With no condensation) Insulation resistance 20 ㏁ min(500 V d.c.) Dielectric strength 1,000 V a.c. for 1 min Vibration resistance 10 - 55 ㎐ double amplitude : 1.5 ㎜, for 2 hours each in X·Y and Z direction Shock resistance 500 m/s², 3 times each in X·Y and Z directions Connection method Cable extended, Cable : 4P, Diameter Ø4 ㎜, Length : 1.5 m(but transmitter is 3P) Material Case and lens : PC Weight Approx. 250g (included the weight of box) Approx. 150g (included the weight of box) Approx. 100g (included the weight of box)

Read more less

PR seriesRound type Photoelectric Sensors - Light on / Dark on selectable- Attached sensitivity adjustment volume- Protection structure IP66, circular structure- Built in output cutoff over current protecting circuit odel Metal NPN PR-T10NC PRM-M2N PRM-R01N PRM-R04N PNP PR-T10PC PRM-M2P PRM-R01P PRM-R04P Plastic NPN PR-T10NP PRP-M2N PRP-R01N PRP-R04N PNP PR-T10PP PRP-M2P PRP-R01P PRP-R04P Sensing mode Through-beam Retroreflective (mirror) Diff use-reflective Sensing distance 10 m 0.1 ~ 2mm (Note 1) 0.1m 0.4m Hysteresis distance - Less than 20% of the sensing range Detecting object Ø10 mm more (Opaque) Ø60 mm more (Opaque) White non-glossy paper (100 x 100 mm) Light source (Wavelength) Infrared ligtening LED (890 ㎚) IR (860 nm) Current consumption Transmitter : 15 ㎃ Receiver : 20 ㎃ Max. 30 mA Power voltage 12 - 24 V d.c. ± 10 % (Ripple max. 10 %) Control output ▪NPN or PNP open collector output ▪Load current - max. 100 mA (26.4 V d.c. standard) ▪Residual voltage - NPN : max. 1 V, PNP : max. 1 V Operation mode Light ON / Dark ON(By white cable) ※ but, through-beam has only in the receiver Protection circuit Common ▪Power reverse connection protection ▪Output reverse connection protection ▪Output short-circuit over-current protection ▪Output short-circuit alarm (Note2) Individual - Mutual interference prevention function Response time 1 ms or less Insulation Resistance More than 20 MΩ (500 V d.c. mega) Noise immunity Square wave noise by noise simulator (pulse width 1㎲) ± 240 V Dielectric strength 1,000 V a.c. (50/60 Hz for 1 minute) Vibration bresistance 10 - 55 Hz, Double amplitude : 1.5 mm, X·Y·Z 2 in each direction for 2 hours Shock resistance 500 m/s², X·Y·Z each direction 3 times Ambient illumination Sunlight : max. 11,000 lx / Incandescent : max 3,000 lx (Light receiving surface illuminance) Ambient temperature During operation : -25 ~ +55 ℃, During storage : -40 ~ +70 ℃ (Without condensation) Ambient humidity 35 ~ 85 % RH (Without condensation) Degree of protection IP66 (IEC standard) Certification Material Case ▪Metal : Brass Chrome Plating ▪Plastic : Plastic Display PC Lens PC Accessory Common ▪Metal : 2 fixing nuts, 1 washer, V/R adjustment screwdriver ▪Plastic : 2 fixing nuts, V/R adjustment screwdriver Individual - Mirror (HY-M5) - Weight ▪Metal : Approx. 320g ▪Plastic : Approx. 280g ▪Metal : Approx. 160g ▪Plastic : Approx. 140g

Read more less

PR seriesRound type Photoelectric Sensors - Light on / Dark on selectable- Attached sensitivity adjustment volume- Protection structure IP66, circular structure- Built in output cutoff over current protecting circuit Model Metal NPN PR-T10NC PRM-M2N PRM-R01N PRM-R04N PNP PR-T10PC PRM-M2P PRM-R01P PRM-R04P Plastic NPN PR-T10NP PRP-M2N PRP-R01N PRP-R04N PNP PR-T10PP PRP-M2P PRP-R01P PRP-R04P Sensing mode Through-beam Retroreflective (mirror) Diff use-reflective Sensing distance 10 m 0.1 ~ 2mm (Note 1) 0.1m 0.4m Hysteresis distance - Less than 20% of the sensing range Detecting object Ø10 mm more (Opaque) Ø60 mm more (Opaque) White non-glossy paper (100 x 100 mm) Light source (Wavelength) Infrared ligtening LED (890 ㎚) IR (860 nm) Current consumption Transmitter : 15 ㎃ Receiver : 20 ㎃ Max. 30 mA Power voltage 12 - 24 V d.c. ± 10 % (Ripple max. 10 %) Control output ▪NPN or PNP open collector output ▪Load current - max. 100 mA (26.4 V d.c. standard) ▪Residual voltage - NPN : max. 1 V, PNP : max. 1 V Operation mode Light ON / Dark ON(By white cable) ※ but, through-beam has only in the receiver Protection circuit Common ▪Power reverse connection protection ▪Output reverse connection protection ▪Output short-circuit over-current protection ▪Output short-circuit alarm (Note2) Individual - Mutual interference prevention function Response time 1 ms or less Insulation Resistance More than 20 MΩ (500 V d.c. mega) Noise immunity Square wave noise by noise simulator (pulse width 1㎲) ± 240 V Dielectric strength 1,000 V a.c. (50/60 Hz for 1 minute) Vibration bresistance 10 - 55 Hz, Double amplitude : 1.5 mm, X·Y·Z 2 in each direction for 2 hours Shock resistance 500 m/s², X·Y·Z each direction 3 times Ambient illumination Sunlight : max. 11,000 lx / Incandescent : max 3,000 lx (Light receiving surface illuminance) Ambient temperature During operation : -25 ~ +55 ℃, During storage : -40 ~ +70 ℃ (Without condensation) Ambient humidity 35 ~ 85 % RH (Without condensation) Degree of protection IP66 (IEC standard) Certification Material Case ▪Metal : Brass Chrome Plating ▪Plastic : Plastic Display PC Lens PC Accessory Common ▪Metal : 2 fixing nuts, 1 washer, V/R adjustment screwdriver ▪Plastic : 2 fixing nuts, V/R adjustment screwdriver Individual - Mirror (HY-M5) - Weight ▪Metal : Approx. 320g ▪Plastic : Approx. 280g ▪Metal : Approx. 160g ▪Plastic : Approx. 140g

Read more less

PTX seriesPower supply build-in type Photoelectric Sensors - Terminal block type connection for convenient wiring- various range of power supply voltage (24 - 240 V d.c./a.c., 12 - 24 V d.c.).- Long-Distance detection.- Timer function available.- Ip66 protection structure. Amp built-in type (Type B) Model Normal type PTX-T15B PTX-T30B PTX-M7B PTX-R1B Timerbuilt-in type PTX-T15B-T PTX-T30B-T PTX-M7B-T PTX-R1B-T Sensing type Through beam type Retro reflection type Diffuse reflection type Sensing distance 15m 30m 7m (Note1) 1m Sensing object Opaque object above Ø20 mm Opaque object above Ø60 ㎜ White paper with no gloss 200 mm × 200 m Power supply voltage 12 - 24 V d.c. ±10 % Power consumption Emitter : 35 mA max. Transmitter : 20 mA max. 45 mA max. Control output NPN/PNP open collector yield output at the same time, Load current : 150 mA d.c. (Resistive load) NPN Residual voltage : Max 1 V d.c. / PNP Residual voltage : Max 2 V d.c. Operation mode Light ON/ Dark ON Selection by selector switch Response Time 1 ㎳ max. Hysteresis － Less than 20 % of sensing distance Indicator Output display : Red LED, Stable display : Green LED (However, the red LED of the through-beam type transmitter is the power indicator.) Sensitivity adjustment － Sensitivity adjusting volume built-in Protection circuit Protective circuits for power reverse connection and output break Timer function (Only corresponds to timer built-in type) Select OFF Delay, ON Delay or One Shot Delay by using the ON/OFF switch. Delay Time : 0.1 ~ 5 sec adjust by the volume. Light source (wavelength) IR (850 nm) Ambient temperature Operation : -20 ~ 60 ℃, Storage : -25 ~ 70 ℃ (with no icing nor dew condensation) Ambient humidity 35 ~ 85 % RH (with no icing nor dew condensation) Degree of protection IP 66 (IEC standard) Insulation resistance 20 ㏁ or min (standard on 500 V d.c. mega) Dielectric strength 1500 V a.c. (1 minute) Vibration resistance 10 - 55 ㎐, Double amplitude : 1.5 ㎜, X . Y . Z 2 hours in each directions Shock resistance 500m/s² (approx 50 G), 3 times to each of X, Y, Z directions Connection method Terminal Material Case : ABS, Lens : PC Weight Transmission type : about 280 g, mirror reflection type : about 150 g, diffuse reflection type : about 140 g Accessories Individual - Reflector (HY-M5) - Common Driver, Bracket, Bolt, Nut, Water-proof rubber, Wire holder

Read more less

PTX seriesPower supply build-in type Photoelectric Sensors - Terminal block type connection for convenient wiring- various range of power supply voltage (24 - 240 V d.c./a.c., 12 - 24 V d.c.).- Long-Distance detection.- Timer function available.- Ip66 protection structure. ■ Power built-in type (Type A) Model Normal type PTX-T15A PTX-M7A PTX-R1A Timerbuilt-in type PTX-T15A-T PTX-M7A-T PTX-R1A-T Sensing type Through beam type Retro reflection type Diffuse reflection type Sensing distance 15m 7m (Note 1) 1m Sensing object Opaque object above Ø20 ㎜ Opaque object above Ø60 ㎜ White paper with no gloss 200 ㎜ × 200 m Power supply voltage 24 - 240 V d.c./a.c. ±10 %, 50/60 Hz Power Consumption Emitter : 2 VA max. Transmitter : 1 VA max. 2 VA max. Control output Relay contact output (Contact composition 1a, 1b), Contact capacity : 30 V d.c. 5 A / 250 V a.c. 5 A Resistive load, Rated load life expectancy less than 100,000 times. Operating Mode Light ON/Dark ON are selectable by the selector switch Response Time 20 ㎳ max. Hysteresis － Less than 20 % of sensing distance Indicator Output indication : Red LED, Stability indication : Green LED (However, the red LED of the through-beam type transmitter is the power indicator.) Sensitivity adjustment － Sensitivity adjusting volume built-in Protection circuit Surge protective circuit Timer function (Only corresponds to timer built - in type) Select OFF Delay, ON Delay or One Shot Delay by using the ON/OFF switch. Delay Time : 0.1 ~ 5 sec adjust by the volume. Light source (wavelength) IR (850 nm) Ambient temperature Operating: -20 to 60 ° C, Storage: -25 ~ 70 ℃ (with no icing nor dew condensation) Ambient humidity 35 ~ 85 % RH (with no icing nor dew condensation) Degree of protection IP 66 (IEC standard) Insulation resistance 20 ㏁ or min (standard on 500 V d.c. mega) Dielectric strength 1500 V a.c. (1 minute) Vibration resistance 10 - 55 ㎐, Double amplitude : 1.5 ㎜, X . Y . Z 2 hours in each directions Shock resistance 500m/s² (approx 50 G), X . Y . Z 3 times in each directions Connection method Terminal Material Case : ABS, Lens : PC Weight Transmission type : Approx 300 g, Mirror reflection type : about 160 g, Diffuse reflection type : about 150 g Accessories Individual - Reflector (HY-M5) - Common Driver, Bracket, Bolt, Nut, Water-proof rubber, Wire holder

Read more less

PU seriesU-Shaped type Photoelectric Sensors - Solid die casting case- Detecting distance 30/50 mm- Optic axis control unnecessary- Attached sensitivity adjustment volume Model PU-30 PU-30S PU-50 PU-50S Sensing method Through-beam Sensing distance 30 mm 50 mm Sensing object Ø2 ㎜ min (Opaque body) Ø0.6 ㎜ min (Opaque body) Ø1.5 ㎜ min (Opaque body) Ø0.4 ㎜ min (Opaque body) Power supply voltage 12 - 24 V d.c. ± 10 % Current consumption 30 ㎃ max Control output NPN Voltage output, Load current : 200 ㎃ (30 V d.c.) max, Remaining voltage : 2 V d.c. max Output action L.ON/D.ON selected by the power reverse connection Response time 1 ㎳ max Light source (wave length) Infrared LED Operation Lamp Operation Indicator : Red LED, Power Indicator : Green LED Sensitivity adjustment Fixed By the volume Fixed By the volume Protective circuit Output short protective circuit Ambient illumination ▪Sunlight : 11,000 Lux max ▪Incandescent lamp : 3,000 Lux max Ambient temperature operating temperature : -20 ~ 60 ℃ During storage : -25 ~ 70 ℃ (Without condensation or icing) Ambient humidity 35 ~ 85 % RH (With no condensation) Protective structure IP 65 (IEC) Insulation resistance More than 20 MΩ (500 V d.c. mega) Dielectric strength 1,000 V a.c. (50/60 Hz for 1 minute) Vibration resistance 10 - 55 ㎐ double amplitude 1.5 ㎜, for 2 hours each in X · Y · Z directions Shock resistance 500 m/s², 3 times each in X · Y · Z directions Connection method Cable withdrawal type (number of wires : 3P,   outer diameter : Ø4 ㎜,   length : 2 m) Material Case : ZN, Lens : PC Certification Weight Approx. 250g (Included the weight of box)

Read more less

PU seriesU-Shaped type Photoelectric Sensors - Solid die casting case- Detecting distance 30/50 mm- Optic axis control unnecessary- Attached sensitivity adjustment volume Model PU-30 PU-30S PU-50 PU-50S Sensing method Through-beam Sensing distance 30 mm 50 mm Sensing object Ø2 ㎜ min (Opaque body) Ø0.6 ㎜ min (Opaque body) Ø1.5 ㎜ min (Opaque body) Ø0.4 ㎜ min (Opaque body) Power supply voltage 12 - 24 V d.c. ± 10 % Current consumption 30 ㎃ max Control output NPN Voltage output, Load current : 200 ㎃ (30 V d.c.) max, Remaining voltage : 2 V d.c. max Output action L.ON/D.ON selected by the power reverse connection Response time 1 ㎳ max Light source (wave length) Infrared LED Operation Lamp Operation Indicator : Red LED, Power Indicator : Green LED Sensitivity adjustment Fixed By the volume Fixed By the volume Protective circuit Output short protective circuit Ambient illumination ▪Sunlight : 11,000 Lux max ▪Incandescent lamp : 3,000 Lux max Ambient temperature operating temperature : -20 ~ 60 ℃ During storage : -25 ~ 70 ℃ (Without condensation or icing) Ambient humidity 35 ~ 85 % RH (With no condensation) Protective structure IP 65 (IEC) Insulation resistance More than 20 MΩ (500 V d.c. mega) Dielectric strength 1,000 V a.c. (50/60 Hz for 1 minute) Vibration resistance 10 - 55 ㎐ double amplitude 1.5 ㎜, for 2 hours each in X · Y · Z directions Shock resistance 500 m/s², 3 times each in X · Y · Z directions Connection method Cable withdrawal type (number of wires : 3P,   outer diameter : Ø4 ㎜,   length : 2 m) Material Case : ZN, Lens : PC Certification Weight Approx. 250g (Included the weight of box)

Read more less

PU seriesU-Shaped type Photoelectric Sensors - Solid die casting case- Detecting distance 30/50 mm- Optic axis control unnecessary- Attached sensitivity adjustment volume Model PU-30 PU-30S PU-50 PU-50S Sensing method Through-beam Sensing distance 30 mm 50 mm Sensing object Ø2 ㎜ min (Opaque body) Ø0.6 ㎜ min (Opaque body) Ø1.5 ㎜ min (Opaque body) Ø0.4 ㎜ min (Opaque body) Power supply voltage 12 - 24 V d.c. ± 10 % Current consumption 30 ㎃ max Control output NPN Voltage output, Load current : 200 ㎃ (30 V d.c.) max, Remaining voltage : 2 V d.c. max Output action L.ON/D.ON selected by the power reverse connection Response time 1 ㎳ max Light source (wave length) Infrared LED Operation Lamp Operation Indicator : Red LED, Power Indicator : Green LED Sensitivity adjustment Fixed By the volume Fixed By the volume Protective circuit Output short protective circuit Ambient illumination ▪Sunlight : 11,000 Lux max ▪Incandescent lamp : 3,000 Lux max Ambient temperature operating temperature : -20 ~ 60 ℃ During storage : -25 ~ 70 ℃ (Without condensation or icing) Ambient humidity 35 ~ 85 % RH (With no condensation) Protective structure IP 65 (IEC) Insulation resistance More than 20 MΩ (500 V d.c. mega) Dielectric strength 1,000 V a.c. (50/60 Hz for 1 minute) Vibration resistance 10 - 55 ㎐ double amplitude 1.5 ㎜, for 2 hours each in X · Y · Z directions Shock resistance 500 m/s², 3 times each in X · Y · Z directions Connection method Cable withdrawal type (number of wires : 3P,   outer diameter : Ø4 ㎜,   length : 2 m) Material Case : ZN, Lens : PC Certification Weight Approx. 250g (Included the weight of box)

Read more less

PY seriesSlim type Photoelectric Sensors - Light ON / Dark ON mode switching selection by control wire.- 1 ms response time.- Display control output/stable output.- Built in output cutoff protecting circuit.- Simple installation (16X28X8 mm) due to compact size.- Built in reverse connection of power protecting circuit. Model NPN PY-T3N PNP PY-T3P Appearance Sensing mode Through - beam Sensing distance 3m Sensing object Ø5 mm min. opaque object Min. sensing object Ø2 mm min. opaque object (3 m standard) Hysteresis distance None Power voltage 12 - 24 V d.c. ±10 % Current consumption Emitter : 10 mA max. Receiver : 15 mA max. Control output NPN or PNP open collector output Load current : 100 mA max. (26.4 V d.c. standard) Residual voltage - NPN : 1V max. , PNP : 1V max Operation mode Light ON / Dark ON mode switching selection by control wire (receiver only) Response time 1 ㎳ max Light source (wavelength) Infrared LED (850 nm) LED Red LED : control output, green LED: stability indication (However, emitter red LED : power indication) Protecting circuit Power reverse connection protecting circuit and output break overcurrent protecting circuit. Output break (note 1), output reverse connection protection circuit Ambient illumination Sunlight : 11,000 Lux max., Incandescent lamp : 3,000 Lux max Ambient temperature -20 ~ 60 ℃ (storage ambient temperature : -25 ~ 70 ℃) Ambient humidity 35 ~ 85 % RH (without condensation) Protection rating IP67 (IEC) Insulation resistance 20 MΩ min. (500 V d.c. mega standard) Noise immunity Square wave noise by noise simulator (pulse width : 1 μs) ± 240 V Dielectric strength 1,000 V a.c. (50/60 ㎐ for 1 minute) Vibration resistance 10 - 55 ㎐, double amplitude : 1.5 ㎜, for 2 hours in X·Y·Z directions Shock resistance 500 m/s² 3 times in each X·Y·Z directions Certification Connection method Wire extended type Connection specifications Ø3 mm, 4-core, 2 m (emitter: Ø3 mm, 2-core, 2 m) Materials ▪Case : PC, ▪Lens : PC Weight approx. 66g

Read more less

HPA-12 series Sensor controller - Provide solid output contact- (250V 3A, more than 100 thousand times)- Widely used controller combining NPN/PNP- Easy installation because of plug in method Model HPA-12 Appearance Rated Voltage 220 V a.c. (voltage fluctuation rate ±10 %) 50/60 Hz Power Consumption Approx. 4 VA Power for Sensor 12 V d.c. (±10 %) below 50 mA Connectable Sensor (Input) Transistor output sensor of NPN, PNP Control Output Relay Contact : 1c (250 V a.c. 3 A Resistive Load) (Rated Load Lifetime : above 100 thousands times) Response Time Approx. 10 ㎳ Operating Ambient Temperature/Humidity -10 ~ 50 ℃, 35 ~ 85 % R.H. (with no freezing or no condensation) Noise Immunity Power cable : 1,500 VP, Pulse width : 0.5 μs (by a noise simulator) Dielectric Strength 1,500 V a.c. for 1 minute (between the power and the output) Insulated Resistance 20 MΩ (500 V d.c. at mega between the power and the output) Vibration resistance 10 - 55 Hz (cycle for 1 minute), double amplitudes width : 1.5 ㎜, each X·Y·Z direction for 2 hours (but while the power is off) Shock Resistance 100 m/s² (approx. 10 G), each X·Y·Z direction for 2 times(but while the power is off) Weight Approx. 260 ghan

Read more less

odel NPN PAS-T4NL PAS-T8NL PAS-T12NL PAS-T16NL PAS-T20NL PAS-T4ND PAS-T8ND PAS-T12ND PAS-T16ND PAS-T20ND PNP PAS-T4PL PAS-T8PL PAS-T12PL PAS-T16PL PAS-T20PL PAS-T4PD PAS-T8PD PAS-T12PD PAS-T16PD PAS-T20PD Number of optical axis 4 8 12 16 20 Sensing width 60 mm 140 mm 220 mm 300 mm 380 mm Sensing distance 5 m Sensing object Opaque object over Ø30 ㎜ Optical axis pitch 20 mm Light source IR (860nm) Power voltage 12 - 24 VDC ±10% Ripple(p-p)10% Max Current consumption Max. 80 ㎃ Max. 90 ㎃ Max. 100 ㎃ Max. 110 ㎃ Max. 120 ㎃ Control output NPN / PNP open collector output • Load Current: Max. 100mA (26.4VDC standard) • Residual voltage - NPN: Max. 1 V, PNP:Max. 1 V Operation mode Light On or Dark On Operation LED • Transmitter : Power indicator(Green LED), M/S display(Red LED) • Receiver : Light on stability display(Green LED), output Display(Red LED), E1 display(Red LED), E2 display(Blue LED) Protection circuit • Power reverse connection protection, • Output short-circuit over-current protection, • Mutual interference prevation function Response Time Max. 7 ㎳ Insulation resistance Min. 20 ㏁ (500 VDC mega standard) Noise immunity Square wave noise by noise simulator (pulse width 1 ㎲) ±240 V Dielectric strength 1,000 VAC (50/60 Hz 1min) Vibration resistance 10 - 55 ㎐, double amplitude: 1.5 ㎜, X·Y·Z in each direction for 2 hours Shock resistance 500 m/s², X·Y·Z each direction 3 times Ambient illumination Sunlight : Max. 10,000 Lux, Incandescent lamp : Max. 3,000 Lux Ambient temperature • During operation : -10 ~ +55 ℃, • During storage : -25 ~ +70 ℃ (Without condensation or icing) Ambient humidity 35 ~ 85 % R.H. (Without condensation) Degree of protection IP40 (IEC standard) Approval Connection method cable withdrawal type (Number of wires : 5P, Code length : 3m , Dimension : Ø4mm) Material Case ABS front cover Acryl lens Acryl weight 160g 180g 200g 220g 240g

Read more less

Model NPN PAS-T4NL PAS-T8NL PAS-T12NL PAS-T16NL PAS-T20NL PAS-T4ND PAS-T8ND PAS-T12ND PAS-T16ND PAS-T20ND PNP PAS-T4PL PAS-T8PL PAS-T12PL PAS-T16PL PAS-T20PL PAS-T4PD PAS-T8PD PAS-T12PD PAS-T16PD PAS-T20PD Number of optical axis 4 8 12 16 20 Sensing width 60 mm 140 mm 220 mm 300 mm 380 mm Sensing distance 5 m Sensing object Opaque object over Ø30 ㎜ Optical axis pitch 20 mm Light source IR (860nm) Power voltage 12 - 24 VDC ±10% Ripple(p-p)10% Max Current consumption Max. 80 ㎃ Max. 90 ㎃ Max. 100 ㎃ Max. 110 ㎃ Max. 120 ㎃ Control output NPN / PNP open collector output • Load Current: Max. 100mA (26.4VDC standard) • Residual voltage - NPN: Max. 1 V, PNP:Max. 1 V Operation mode Light On or Dark On Operation LED • Transmitter : Power indicator(Green LED), M/S display(Red LED) • Receiver : Light on stability display(Green LED), output Display(Red LED), E1 display(Red LED), E2 display(Blue LED) Protection circuit • Power reverse connection protection, • Output short-circuit over-current protection, • Mutual interference prevation function Response Time Max. 7 ㎳ Insulation resistance Min. 20 ㏁ (500 VDC mega standard) Noise immunity Square wave noise by noise simulator (pulse width 1 ㎲) ±240 V Dielectric strength 1,000 VAC (50/60 Hz 1min) Vibration resistance 10 - 55 ㎐, double amplitude: 1.5 ㎜, X·Y·Z in each direction for 2 hours Shock resistance 500 m/s², X·Y·Z each direction 3 times Ambient illumination Sunlight : Max. 10,000 Lux, Incandescent lamp : Max. 3,000 Lux Ambient temperature • During operation : -10 ~ +55 ℃, • During storage : -25 ~ +70 ℃ (Without condensation or icing) Ambient humidity 35 ~ 85 % R.H. (Without condensation) Degree of protection IP40 (IEC standard) Approval Connection method cable withdrawal type (Number of wires : 5P, Code length : 3m , Dimension : Ø4mm) Material Case ABS front cover Acryl lens Acryl weight 160g 180g 200g 220g 240g

Read more less

odel NPN PAS-T4NL PAS-T8NL PAS-T12NL PAS-T16NL PAS-T20NL PAS-T4ND PAS-T8ND PAS-T12ND PAS-T16ND PAS-T20ND PNP PAS-T4PL PAS-T8PL PAS-T12PL PAS-T16PL PAS-T20PL PAS-T4PD PAS-T8PD PAS-T12PD PAS-T16PD PAS-T20PD Number of optical axis 4 8 12 16 20 Sensing width 60 mm 140 mm 220 mm 300 mm 380 mm Sensing distance 5 m Sensing object Opaque object over Ø30 ㎜ Optical axis pitch 20 mm Light source IR (860nm) Power voltage 12 - 24 VDC ±10% Ripple(p-p)10% Max Current consumption Max. 80 ㎃ Max. 90 ㎃ Max. 100 ㎃ Max. 110 ㎃ Max. 120 ㎃ Control output NPN / PNP open collector output • Load Current: Max. 100mA (26.4VDC standard) • Residual voltage - NPN: Max. 1 V, PNP:Max. 1 V Operation mode Light On or Dark On Operation LED • Transmitter : Power indicator(Green LED), M/S display(Red LED) • Receiver : Light on stability display(Green LED), output Display(Red LED), E1 display(Red LED), E2 display(Blue LED) Protection circuit • Power reverse connection protection, • Output short-circuit over-current protection, • Mutual interference prevation function Response Time Max. 7 ㎳ Insulation resistance Min. 20 ㏁ (500 VDC mega standard) Noise immunity Square wave noise by noise simulator (pulse width 1 ㎲) ±240 V Dielectric strength 1,000 VAC (50/60 Hz 1min) Vibration resistance 10 - 55 ㎐, double amplitude: 1.5 ㎜, X·Y·Z in each direction for 2 hours Shock resistance 500 m/s², X·Y·Z each direction 3 times Ambient illumination Sunlight : Max. 10,000 Lux, Incandescent lamp : Max. 3,000 Lux Ambient temperature • During operation : -10 ~ +55 ℃, • During storage : -25 ~ +70 ℃ (Without condensation or icing) Ambient humidity 35 ~ 85 % R.H. (Without condensation) Degree of protection IP40 (IEC standard) Approval Connection method cable withdrawal type (Number of wires : 5P, Code length : 3m , Dimension : Ø4mm) Material Case ABS front cover Acryl lens Acryl weight 160g 180g 200g 220g 240g

Read more less

odel NPN PAS-T4NL PAS-T8NL PAS-T12NL PAS-T16NL PAS-T20NL PAS-T4ND PAS-T8ND PAS-T12ND PAS-T16ND PAS-T20ND PNP PAS-T4PL PAS-T8PL PAS-T12PL PAS-T16PL PAS-T20PL PAS-T4PD PAS-T8PD PAS-T12PD PAS-T16PD PAS-T20PD Number of optical axis 4 8 12 16 20 Sensing width 60 mm 140 mm 220 mm 300 mm 380 mm Sensing distance 5 m Sensing object Opaque object over Ø30 ㎜ Optical axis pitch 20 mm Light source IR (860nm) Power voltage 12 - 24 VDC ±10% Ripple(p-p)10% Max Current consumption Max. 80 ㎃ Max. 90 ㎃ Max. 100 ㎃ Max. 110 ㎃ Max. 120 ㎃ Control output NPN / PNP open collector output • Load Current: Max. 100mA (26.4VDC standard) • Residual voltage - NPN: Max. 1 V, PNP:Max. 1 V Operation mode Light On or Dark On Operation LED • Transmitter : Power indicator(Green LED), M/S display(Red LED) • Receiver : Light on stability display(Green LED), output Display(Red LED), E1 display(Red LED), E2 display(Blue LED) Protection circuit • Power reverse connection protection, • Output short-circuit over-current protection, • Mutual interference prevation function Response Time Max. 7 ㎳ Insulation resistance Min. 20 ㏁ (500 VDC mega standard) Noise immunity Square wave noise by noise simulator (pulse width 1 ㎲) ±240 V Dielectric strength 1,000 VAC (50/60 Hz 1min) Vibration resistance 10 - 55 ㎐, double amplitude: 1.5 ㎜, X·Y·Z in each direction for 2 hours Shock resistance 500 m/s², X·Y·Z each direction 3 times Ambient illumination Sunlight : Max. 10,000 Lux, Incandescent lamp : Max. 3,000 Lux Ambient temperature • During operation : -10 ~ +55 ℃, • During storage : -25 ~ +70 ℃ (Without condensation or icing) Ambient humidity 35 ~ 85 % R.H. (Without condensation) Degree of protection IP40 (IEC standard) Approval Connection method cable withdrawal type (Number of wires : 5P, Code length : 3m , Dimension : Ø4mm) Material Case ABS front cover Acryl lens Acryl weight 160g 180g 200g 220g 240g

Read more less

Aluminium Adjustable Spud Wrenches with Plastic Jaw Covers Item No.: AOM Die casting aluminum body and jaw.   Tool No. Color - L - Max. Opening Weight Kgrs. AOM 68 Silver 200mm (8") 16mm〜68ｍｍ 0.24 AOM 68G Gold 200mm (8") 16mm〜68ｍｍ 0.24 AOM 68V Violet 200mm (8") 16mm〜68ｍｍ 0.24

Read more less

Aluminum Pipe Wrenches Drop-forged Aluminium Bodies Item No.: ALP Trimo pattern, drop-forged aluminum body.   Tool No. -L- Pipe Size Max. opening Weight Kgrs. ALP-250 250mm(10") 1-1/4" 48mm 0.45 ALP-300 300mm(12") 1-1/2" 60mm 0.57 ALP-350 350mm(14") 2" 72mm 0.8 ALP-450 450mm(18") 2-1/2" 86mm 1.23 ALP-600 600mm(24") 3" 105mm 2.17 ALP-900 900mm(36") 4" 150mm 4.2

Read more less

Angular Bolt Cutters Item No.: AC Angular jaws with clipper-cut knives which have 30 centigrade offset to keep work in view and hands clear of work surface while cutting.Recommendable maximum hardness of material to be cut... Brinell 370-Rockwell C40-133 kg-mm2.   Tool No. -L- Capacity Capacity Weight Kgrs 49.6kg/mm2 HRC40 AC 350 350mm(14") 7mm 5mm 1 AC 450 450mm(18") 8mm 6mm 1.7 AC 600 600mm(24") 10mm 8mm 2.8

Read more less

Belt Strap Wrenches Item No.: BTW Forged I-Bean handle and head in one piece construction gives maximum strength.Strong woven nylon strap with special coating gives strong tight grip.Strap adjusts fast and easy.   Tool No. -L- Size of Pipe Length of Belt Weight Kgrs. BTW-3G 300mm 3" 400mm 0.57 BTW-6G 300mm 6" 700mm 0.59

Read more less

Cable Cutters with Replaceable Jaws Item No.: SC-R Drop-forged high grade alloy tool steel jaws, shear cut knives give sharp, clean cut.Suitable for cutting soft, non-steel cables such as lead and rubber covered aluminum and copper cable.Not for cutting hard cable, ACSR cable, wire rope, steel, guy wire or self-supporting standing strand.   Tool No. -L- Capacity Weight Kgrs. Copper and Aluminum Cable SC250-R 600mm(24") Alum. 600MCM(350mm2 ) 1.78 　 600mm(25") Copper 350MCM(250mm2 ) 1.78 SC500-R 830mm(33") Alum. 1000MCM(650mm2 ) 4 　 830mm(34") Copper 500MCM(300mm2 ) 4

Read more less

Chain Wrenches Item No.: CW Forged strong I-Beam handles.Designed for working in confined area where regular pipe wrenched will not fit.Excellent for pipe fittings.   Tool No. -L- Size of Pipe Length of Chain Weight Kgrs. CW-3 290mm 3" 435mm 1.1 CW-4 390mm 4" 512mm 1.25 CW-6 490mm 6" 682mm 3 CW-8 670mm 8" 853mm 5.5 CW-10 710mm 10" 980mm 6.4 CW-10L 710mm 12" 1170mm 7.4

Read more less

Handy Type Cable Cutters Item No.: SC Shear-cut jaws designed for cutting aluminum and copper cable.Not for cutting hard cable or wire rope   Tool No. -L- Capacity Weight Kgrs. Copper and Aluminum Cable SC 10 160mm Copper IV Cable22mm2 0.17 　 　 Copper WCT Cable50mm2 0.17 SC 20 210mm Copper IV Cable30mm2 0.29 　 　 Copper WCT Cable80mm2 0.29 SC 30 240mm Copper IV Cable38mm2 0.48 　 　 Copper WCT Cable90mm2 0.48

Read more less

Handy Type Wire Rope Cutters, HWC 6 Item No.: HWC 6 Shear-cut knives give clean and sharp cut.Suitable for cutting wire rope, piano wire, steel wire, ACSR cable and aircraft cable.    Tool No. -L- Capacity Capacity Capacity Weight Kgrs. Copper Aluminum Wire Rope ACSR HWC 6 190mm(7.5") 6mm 2.5mm 2.4mm 0.31

Read more less

Heavy Duty Wire Rope Cutters Item No.: WC  Notched and shear-cut knives hold and lock cable in cutting position.Shear-cut knives give clear and sharp cut.Suitable for cutting wire rope, piano wire,steel wire, ACSR cable and aircraft cable.Not for cutting stainless steel wire.    Tool No. -L- Capacity Weight Kgrs. All type of Wire Rope ACSR cable except for stainless steel WC 10 600mm(24") 10mm(3/8") 2.3 WC 14 750mm(30") 14mm(9/16") 3.85 WC 16 900mm(36") 16mm(5/8") 5.5 WC 20 1050mm(42") 20mm(3/4") 8.5

Read more less

High Tensile Red Jaw Bolt Cutters Item No.:BC-H Features drop-forged high tensile alloy tool steel with specially heat-treated, precision cutting edges for longer life.Suitable for cutting harder materials.Recommendable maximum hardness of material to be cut: Brinell 450-Rockwell C48-162 kg-mm2.   Tool No. -L- Capacity Capacity Weight Kgrs. Type of Jaw 49.6kg/mm2 HRC48 BC 300-H 300mm(12") 5mm 4mm 0.7 Clipper Cut BC 350-H 350mm(14") 7mm 5mm 1 Clipper Cut BC 450-H 450mm(18") 8mm 5.5mm 1.7 Clipper Cut BC 600-H 600mm(24") 10mm 7mm 2.8 Center Cut BC 900-H 900mm(36") 16mm 9mm 6.4 Center Cut BC1050-H 1050mm(42") 19mm 10mm 8.6 Center Cut

Read more less

Light Weight Cable Cutters, SC250 Item No.: SC250 Drop-forged high grade alloy tool steel jaws, shear cut knives give sharp, clean cut.Suitable for cutting soft, non-steel cables such as lead and rubber covered aluminum and copper cable.Not for cutting hard cable, ACSR cable, wire rope, steel, guy wire or self-supporting standing strand.   Tool No. -L- Capacity Weight Kgrs. Copper and Aluminum Cable SC250 600mm(24") 250mm2 (26mm dia.) 1.7

Read more less

Nail Pullers, NP-450 Item No.: NP-450 Drop-forged alloy steel jaws.   Tool No. -L- Capacity Weight Kgrs. NP-450 450mm ----------- 1.65

Read more less

Pipe Wrenches Drop-forged Steel Item No.: P Trimo pattern, drop-forged steel   Tool No. -L- Pipe Size Max. Opening Weight Kgrs. P-250 250mm(10") 1-1/4" 51mm 0.63 P-300 300mm(12") 1-1/2" 58mm 1.03 P-350 350mm(14") 2" 69mm 1.43 P-450 450mm(18") 2-1/2" 80mm 2.33 P-600 600mm(24") 3" 95mm 3.56 P-900 900mm(36") 4" 132mm 6.6

Read more less

Standard Black Jaw Bolt Cutters Item No.:BC Features drop-forged high-grade alloy tool steel with precisely heat-treated, precision cutting edges for longer cutting life.Suitable for general purpose and designed for cutting medium steel and soft bolts, nuts, chain, etc.Recommendable maximum hardness of material to be cut: Brinell 370-Rockwell C40-133-mm2. Tool No. -L- Capacity Capacity Weight Kgrs. Type of Jaw 49.6kg/mm2 HRC40 BC 300 300mm(12") 5mm 4mm 0.7 Clipper Cut BC 350 350mm(14") 7mm 5mm 1 Clipper Cut BC 450 450mm(18") 8mm 6mm 1.7 Clipper Cut BC 600 600mm(24") 10mm 8mm 2.8 Center Cut BC 750 750mm(30") 13mm 9mm 4.2 Center Cut BC 900 900mm(36") 16mm 10mm 6.4 Center Cut BC1050 1050mm(42") 19mm 11mm 8.6 Center Cut

Read more less

Steel Strap Cutters, SS200 Item No.: SS 200 Drop-forged special alloy tool steel jaws with heat-treatment.shear-cut knives give clean, smooth and easy cut, excellent for pallets, loading and unloading cars, trucks, ship and metal recycling yards.     Tool No. -L- Capacity Weight Kgrs. Flat Steel Strap SS 200 "200mm(8"")" 32mm x 0.9mm 0.3

Read more less

Steel Strap Cutters, SS450 Item No.: SS 450 Drop-forged special alloy tool steel jaws with heat-treatment.shear-cut knives give clean, smooth and easy cut, excellent for pallets, loading and unloading cars, trucks, ship and metal recycling yards.   Tool No. -L- Capacity Weight Kgrs. Flat Steel Strap SS 450 "450mm(18"")" 51mm x 1.2mm 1.4  

Read more less

Steel Strap Cutters, SS600-SS Item No.: SS 600-SS Drop-forged special alloy tool steel jaws with heat-treatment.shear-cut knives give clean, smooth and easy cut, excellent for pallets, loading and unloading cars, trucks, ship and metal recycling yards.     Tool No. -L- Capacity Weight Kgrs. Flat Steel Strap SS 600-SS 600mm 51mm ｘ 1.3mm or 32mm x 1.2 x double 3

Read more less

Wire Rope Cutters with Forged Aluminum Handles Item No.: HWC  Shear-cut knives give clean and sharp cut.Suitable for cutting wire rope, piano wire, steel wire, ACSR cable and aircraft cable.   Tool No. -L- Capacity Capacity Capacity Weight Kgrs. Copper Aluminum Wire Rope ACSR HWC 9 335mm(13") 9mm 4mm 6mm 0.71 HWC 12 520mm(20") 12mm 4.5mm 7mm 1.5 HWC 16 650mm(26") 16mm 5.0mm 9mm 2.5

Read more less

  HWASHIN Cutter For Sandwich Panel     SKU Model Blade Length (mm) Weight (g) IN 181-0477 2 Blade * 4" 100 120.00 10 181-0486 2 Blade * 5" 125 140.00 10 181-0495 2 Blade * 7" 170 217.00 10 181-0501 4 Blade * 4" 83 114.00 10 181-0510 4 Blade * 7" 115 234.00 10         

Read more less

  HWASHIN Gardening Scissors P-330   Product Name Gardening Scissors P-330 Length (mm) 185 Blade Length (mm) 55 weight (g) 137 Features Electroless plating P.V.C Grip Manufacturer Hwashin Metal Industry Country of Origin Korea    

Read more less

  HWASHIN Gardening Scissors P-340   Product Name Gardening Scissors P-340 Length (mm) 215 Blade Length (mm) 56 weight (g) 213 Features Electroless plating Die-casting handle Manufacturer Hwashin Metal Industry Country of Origin Korea    

Read more less

  HWASHIN Gardening Scissors P-350   Product Name Gardening Scissors P-350 Length (mm) 170 Blade Length (mm) 50 weight (g) 146 Features Electroless plating P.V.C Grip Manufacturer Hwashin Metal Industry Country of Origin Korea    

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-1100 (Replaceable blade)   Product Name Hedge Shears With Aluminum Handle K-1100 (Replaceable blade) Length (mm) 770 Blade Length(mm) 180 weight (g) 860 Features Replaceable blade Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea    

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-1100S (Replaceable blade)   Product Name Hedge Shears With Aluminum Handle K-1100S (Replaceable blade) Length (mm) 630 Blade Length(mm) 155 weight (g) 780 Features Replaceable blade Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-500   Product Name Hedge Shears With Aluminum Handle K-500 Length (mm) 550 Blade Length(mm) 145 weight (g) 635 Features Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-5000   Product Name Hedge Shears With Aluminum Handle K-5000 Length (mm) 720~1050 Blade Length(mm) 150 weight (g) 1000 Features Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-5000S   Product Name Hedge Shears With Aluminum Handle K-5000S Length (mm) 700 Blade Length(mm) 150 weight (g) 760 Features Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-5100   Product Name Hedge Shears With Aluminum Handle K-5100 Length (mm) 680~1010 Blade Length(mm) 145 weight (g) 920 Features Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-520   Product Name Hedge Shears With Aluminum Handle K-520 Length (mm) 680 Blade Length(mm) 145 weight (g) 760 Features Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-540   Product Name Hedge Shears With Aluminum Handle K-550 Length (mm) 680 Blade Length(mm) 170 weight (g) 760 Features Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less

  HWASHIN Hedge Shears With Aluminum Handle K-560   Product Name Hedge Shears With Aluminum Handle K-560 Length (mm) 540 Blade Length(mm) 190 weight (g) 760 Features Aluminum Handle Manufacturer Hwashin Metal Industry Country of Origin Korea     

Read more less