Products
Autonics Autonics Fiber optic sensor, Cylinder type FTC-320-10
FTC-320-10 Type : Cylinder type Sensing distance : 150mm Min. sensing target : Ø1mm Allowable bend radius : R30 Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type Cylinder type Sensing distance 150mm Min. sensing target Ø1mm Allowable bend radius R30 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$19.13
Autonics Autonics Fiber optic sensor, Cylinder+SUS type(SUS length 15mm) FTCS-220-05
FTCS-220-05 Type : Cylinder+SUS type(SUS length 15mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type Cylinder+SUS type(SUS length 15mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$24.38
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-320-06B
FD-320-06B Type : Standard type(bolt type) Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$26.94
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-320-F1
FD-320-F1 Type : Standard type(bolt type) Sensing distance : 60mm Min. sensing target : Ø0.03mm Allowable bend radius : R10 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type Standard type(bolt type) Sensing distance 60mm Min. sensing target Ø0.03mm Allowable bend radius R10 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type
$22.59
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-420-06B
FD-420-06B Type : Standard type(bolt type) Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$30.53
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-620-10H
FD-620-10H Type : Standard type(bolt type) Sensing distance : 300mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 105℃ Type Standard type(bolt type) Sensing distance 300mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 105℃ Sensing type Diffuse reflective type
$38.35
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-620-13B
FD-620-13B Type : Standard type(bolt type) Sensing distance : 100mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 100mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$23.48
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-620-15H1
FD-620-15H1 Type : Standard type(bolt type) Sensing distance : 275mm Min. sensing target : Ø0.08mm Allowable bend radius : R35 Cable length : 2m Environment_Ambient temperature : -40 to 150℃ Type Standard type(bolt type) Sensing distance 275mm Min. sensing target Ø0.08mm Allowable bend radius R35 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 150℃ Sensing type Diffuse reflective type
$81.07
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDC-320-05
FDC-320-05 Type : Cylinder type Sensing distance : 40mm Min. sensing target : Ø0.03mm Allowable bend radius : R15 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type Cylinder type Sensing distance 40mm Min. sensing target Ø0.03mm Allowable bend radius R15 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type
$16.54
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDC-320-06B
FDC-320-06B Type : Cylinder type Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Cylinder type Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$25.27
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDF-210-05R
FDF-210-05R Type : Flat type/Flat view Sensing distance : 30mm Min. sensing target : Ø0.0125mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Flat view Sensing distance 30mm Min. sensing target Ø0.0125mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$57.47
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDFN-210-05R
FDFN-210-05R Type : Flat type/Side view Sensing distance : 30mm Min. sensing target : Ø0.0125mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Side view Sensing distance 30mm Min. sensing target Ø0.0125mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$57.47
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDR-610-10R
FDR-610-10R Type : Right-angle Sensing distance : 120mm Min. sensing target : Ø0.04mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type Right-angle Sensing distance 120mm Min. sensing target Ø0.04mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$53.11
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDRT-420-02B
FDRT-420-02B Type : Right-angle Sensing distance : 230mm Min. sensing target : Ø0.08mm Allowable bend radius : R5 Cable length : 2m Environment_Ambient temperature : -30 to 70℃ Type Right-angle Sensing distance 230mm Min. sensing target Ø0.08mm Allowable bend radius R5 Cable length 2m Free cut Free cut Environment_Ambient temperature -30 to 70℃ Sensing type Diffuse reflective type
$95.05
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDS2-420-05
FDS2-420-05 Type : SUS type(SUS length 45mm) Sensing distance : 40mm Min. sensing target : Ø0.03mm Allowable bend radius : 15R(SUS part 10R) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 45mm) Sensing distance 40mm Min. sensing target Ø0.03mm Allowable bend radius 15R(SUS part 10R) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$28.74
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDS2-620-10
FDS2-620-10 Type : SUS type(SUS length 45mm) Sensing distance : 120mm Min. sensing target : Ø0.03mm Allowable bend radius : R25(SUS part R10) Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 45mm) Sensing distance 120mm Min. sensing target Ø0.03mm Allowable bend radius R25(SUS part R10) Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$21.81
Autonics Autonics Fiber optic sensor, Flat type/Top view(up) FTFU-210-05R
FTFU-210-05R Type : Flat type/Top view(up) Sensing distance : 110mm Min. sensing target : Ø0.04mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Top view(up) Sensing distance 110mm Min. sensing target Ø0.04mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$67.09
Autonics Autonics Fiber optic sensor, L type GTL-410-12V2
GTL-410-12V2 Type : L type Sensing distance : 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target : Ø0.2mm(FU-VA01)/Ø0.15mm(FU-VA02) Allowable bend radius : R25 Cable length : 1m Environment_Ambient temperature : -60 to 250℃ Type L type Sensing distance 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target Ø0.2mm(FU-VA01)/Ø0.15mm(FU-VA02) Allowable bend radius R25 Cable length 1m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type
$298.22
Autonics Autonics Fiber optic sensor, L type/Top view(height 12.2mm) FTLU-310-10R
FTLU-310-10R Type : L type/Top view(height 12.2mm) Sensing distance : 500mm Min. sensing target : Ø0.06mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type L type/Top view(height 12.2mm) Sensing distance 500mm Min. sensing target Ø0.06mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series. Downloads
$53.11
Autonics Autonics Fiber optic sensor, Plastic injection molding type FDP-320-10
FDP-320-10 Type : Plastic injection molding type Sensing distance : 120mm Min. sensing target : Ø0.03mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type Plastic injection molding type Sensing distance 120mm Min. sensing target Ø0.03mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$10.40
Autonics Autonics Fiber optic sensor, Plastic injection molding type FDPF-210-05R
FDPF-210-05R Type : Plastic injection molding type Sensing distance : 70mm Min. sensing target : Ø0.08mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -30 to 70℃ Type Plastic injection molding type Sensing distance 70mm Min. sensing target Ø0.08mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -30 to 70℃ Sensing type Diffuse reflective type
$105.54
Autonics Autonics Fiber optic sensor, Side view FTCSN-2520-05
FTCSN-2520-05 Type : Ø2.47mm Side view Sensing distance : 120mm Min. sensing target : Ø0.0125mm Allowable bend radius : R15 Cable length : 2m Environment_Ambient temperature : -40 to 60℃ Type Ø2.47mm Side view Sensing distance 120mm Min. sensing target Ø0.0125mm Allowable bend radius R15 Cable length 2m Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$81.96
Autonics Autonics Fiber optic sensor, Standard type(bolt type), FT-320-05R
FT-320-05R Type : Standard type(bolt type) Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R1 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R1 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$47.08
Autonics Autonics Fiber optic sensor, Standard type(bolt type), FT-320-06B
FT-320-06B Type : Standard type(bolt type) Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$32.21
Autonics Autonics Fiber optic sensor, Through-beam type FTS1-320-05
FTS1-320-05 Type : SUS type(SUS length 35mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 35mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type
$34.00
Autonics Autonics Fiber optic sensor, Through-beam type GT-410-12V2
GT-410-12V2 Type : Standard type(bolt type) Sensing distance : 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target : Ø0.1mm(FU-VA01)/Ø0.1mm(FU-VA02) Allowable bend radius : R25 Cable length : 1m Environment_Ambient temperature : -60 to 250℃ Type Standard type(bolt type) Sensing distance 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target Ø0.1mm(FU-VA01)/Ø0.1mm(FU-VA02) Allowable bend radius R25 Cable length 1m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type
$276.42
Autonics Autonics Fiber optic sensor, Through-beam type FTFB-210-05R
FTFB-210-05R Type : Flat type/Side view+Top view(bending) Sensing distance : 110mm Min. sensing target : Ø0.04mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Side view+Top view(bending) Sensing distance 110mm Min. sensing target Ø0.04mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$57.47
Autonics Autonics Fiber optic sensor, Through-beam type FTLU1-310-10R
FTLU1-310-10R Type : L type/Top view(height 17.2mm) Sensing distance : 500mm Min. sensing target : Ø0.06mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type L type/Top view(height 17.2mm) Sensing distance 500mm Min. sensing target Ø0.06mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$53.11
Autonics Autonics Fiber optic sensor, Through-beam type FTS-420-10
FTS-420-10 Type : SUS type(SUS length 90mm) Sensing distance : 500mm Min. sensing target : Ø1mm Allowable bend radius : R30(SUS part 10R) Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 90mm) Sensing distance 500mm Min. sensing target Ø1mm Allowable bend radius R30(SUS part 10R) Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$25.27
Autonics Autonics Fiber optic sensor, Through-beam type FTS2-320-05
FTS2-320-05 Type : SUS type(SUS length 45mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 45mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type
$31.31
Autonics Autonics Fiber optic sensor, Through-beam type GTL-420-12H3
GTL-420-12H3 Type : L type Sensing distance : 680mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 350℃ Type L type Sensing distance 680mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 350℃ Sensing type Through-beam type
$292.97
Autonics Autonics Fiber optic sensor, Through-beam type GTR-420-12H3
GTR-420-12H3 Type : Right-angle Sensing distance : 630mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 350℃ Type Right-angle Sensing distance 630mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 350℃ Sensing type Through-beam type
$292.97
Autonics Autonics Fiber optic sensor, Through-beam type, Right-angle GTR-420-12H2
GTR-420-12H2 Type : Right-angle Sensing distance : 650mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 250℃ Type Right-angle Sensing distance 650mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type
$259.86
Autonics Autonics LiDAR Sensor, LSE2-A5R2-ET
LSE2-A5R2-ET Laser for detection emitting property : Infrared laser: 1 Emitting property_Laser class : CLASS 1 Emitting property_Wavelength band : 905nm Emitting property_Max. pulse output power : 27W Power voltage : 24VDC
$1,006.38
Autonics Autonics LiDAR Sensor, LSE3-4A10R2-ET
LSE3-4A10R2-ET Laser for detection emitting property : Infrared laser: 1 Emitting property_Laser class : CLASS 1 Emitting property_Wavelength band : 905nm Monitoring zone : 0.3×0.3 ~ 10×10 m Power voltage : 10 ~ 35 VDC Laser for detection emitting property Infrared laser: 1 Emitting property_Laser class CLASS 1 Emitting property_Wavelength band 905nm Emitting property_Max. pulse output power 80W Laser for installation emitting property Visible light laser: 3 Emitting property_Laser class CLASS 3R Emitting property_Wavelength band 650 nm Emitting property_Max. pulse output power 4 mW Min. size of the scanning target Detection distance of 3m : 2.1×2.1×2.1 cm, Detection distance of 5m : 3.5×3.5×3.5 cm, Detection distance of 10m : 7.0×7.0×7.0 cm Scanning frequency 15 Hz Response time ≤ 20 to 80ms + monitoring time Monitoring zone 0.3×0.3 ~ 10×10 m Angular resolution 0.4° Aperture angle 90° Object reflectivity Min. 2% Korean Railway Standards KRS SG 0068 Weight ≈ 0.9 kg (≈ 1.1 kg) Power voltage 10 ~ 35 VDC Power consumption ＜ 10 W Input Photocoupler input: 1H: ≥ 8 - 30 VDC, L: ≤ 3 VDC Output PhotoMOS relay output: 2Resistive load: 35 VDC/ 24 VAC~, ≤ 80 mA Vibration Max. 2G (18.7m/s²) Shock 30G/18ms Environment_Ambient illumination ≤ 100,000 lx Environment_Ambient temperature -30 to 60 ℃, storage: -30 ~ 70 ℃ (no freezing or condensation) Environment_Ambient humidity 0 to 95 %RH, storage: 0 to 95 %RH (no freezing or condensation) Protection structure IP67(IEC standard) Cable_Power, I/O Ø 5 mm, 8-wire, 5 m Cable_Ethernet 5 mm, 4-wire, 3 m, shield cable, RJ45 connector Core AWG26 (0.16 mm, 7-core), insulator outer diameter: Ø 1 mm Material Case: AL, Window: PC Communication interface Ethernet Sold separately Main bracket: BK-LSE3, Sub bracket: BK-LSE2-SUB Component_PC program atLidar (laser scanner program)
$1,425.70
Autonics Autonics LiDAR Sensor, LSE3-4A5R2-ET
LSE3-4A5R2-ET Laser for detection emitting property : Infrared laser: 1 Emitting property_Laser class : CLASS 1 Emitting property_Wavelength band : 905nm Monitoring zone : 0.3×0.3 ~ 5.6×5.6 m Power voltage : 10 ~ 35 VDC Laser for detection emitting property Infrared laser: 1 Emitting property_Laser class CLASS 1 Emitting property_Wavelength band 905nm Emitting property_Max. pulse output power 80W Laser for installation emitting property Visible light laser: 3 Emitting property_Laser class CLASS 3R Emitting property_Wavelength band 650 nm Emitting property_Max. pulse output power 4 mW Min. size of the scanning target Detection distance of 3m : 2.1×2.1×2.1 cm, Detection distance of 5m : 3.5×3.5×3.5 cm Scanning frequency 15 Hz Response time ≤ 20 to 80ms + monitoring time Monitoring zone 0.3×0.3 ~ 5.6×5.6 m Angular resolution 0.4° Aperture angle 90° Object reflectivity Min. 2% Korean Railway Standards KRS SG 0068 Weight ≈ 0.9 kg (≈ 1.1 kg) Power voltage 10 ~ 35 VDC Power consumption ＜ 10 W Input Photocoupler input: 1H: ≥ 8 - 30 VDC, L: ≤ 3 VDC Output PhotoMOS relay output: 2Resistive load: 35 VDC/ 24 VAC~, ≤ 80 mA Vibration Max. 2G (18.7m/s²) Shock 30G/18ms Environment_Ambient illumination ≤ 100,000 lx Environment_Ambient temperature -30 to 60 ℃, storage: -30 ~ 70 ℃ (no freezing or condensation) Environment_Ambient humidity 0 to 95 %RH, storage: 0 to 95 %RH (no freezing or condensation) Protection structure IP67(IEC standard) Cable_Power, I/O Ø 5 mm, 8-wire, 5 m Cable_Ethernet 5 mm, 4-wire, 3 m, shield cable, RJ45 connector Core AWG26 (0.16 mm, 7-core), insulator outer diameter: Ø 1 mm Material Case: AL, Window: PC Communication interface Ethernet Sold separately Main bracket: BK-LSE3, Sub bracket: BK-LSE2-SUB Component_PC program atLidar (laser scanner program)
$1,174.11
Autonics Autonics photoelectric micro Push Button Type sensor BS5-P1ML
Operation method Push Button Type Button operation_Stop position 5.0±0.4mm Button operation_Output switching position 4.0±0.5mm Button operation_Operation limit position Max. 0mm Light source Infrared LED(940nm) Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 35mA Operation load Max. 3N(Max. 0.3kgf) Operation mode Light ON(output OFF when button ispushed) Control output NPN open collector Connection type Cable type(Ø3, 1m) Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP40 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH External input_Response Max. 1ms Material Case: Polycarbonate + Glass fiber, Button: Polyoxymethylene, Sleeve: SUS304(steel use Stainless 304) Weight Approx. 50g(approx. 30g)
$27.78
Autonics Autonics photoelectric micro sensor ,Through-beam type BS3-F1R
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output NPN open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.94
Autonics Autonics photoelectric micro sensor ,Through-beam type, BS5-T2M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC
$5.10
Autonics Autonics photoelectric micro sensor ,Through-beam type, BS5-Y1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.36
Autonics Autonics photoelectric micro sensor BS5-R1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC
$7.60
Autonics Autonics photoelectric micro sensor Push Button Type BS5-P1MD
Operation method Push Button Type Button operation_Stop position 5.0±0.4mm Button operation_Output switching position 4.0±0.5mm Button operation_Operation limit position Max. 0mm Light source Infrared LED(940nm) Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 35mA Operation load Max. 3N(Max. 0.3kgf) Operation mode Dark ON(output ON when button ispushed) Control output NPN open collector Connection type Cable type(Ø3, 1m) Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP40 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH External input_Response Max. 1ms Material Case: Polycarbonate + Glass fiber, Button: Polyoxymethylene, Sleeve: SUS304(steel use Stainless 304) Weight Approx. 50g(approx. 30g)
$27.78
Autonics Autonics photoelectric micro sensor Push Button Type BS5-P1MD-P-U
Operation method Push Button Type Button operation_Stop position 5.0±0.4mm Button operation_Output switching position 4.0±0.5mm Button operation_Operation limit position Max. 0mm Light source Infrared LED(940nm) Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 35mA Operation load Max. 3N(Max. 0.3kgf) Operation mode Dark ON(output ON when button ispushed) Control output PNP open collector Connection type Cable type(Ø3, 1m) Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP40 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH External input_Response Max. 1ms Material Case: Polycarbonate + Glass fiber, Button: Polyoxymethylene, Sleeve: SUS304(steel use Stainless 304) Weight Approx. 50g(approx. 30g)
$31.48
Autonics Autonics photoelectric micro sensor Push Button Type BS5-P1MD-U
Operation method Push Button Type Button operation_Stop position 5.0±0.4mm Button operation_Output switching position 4.0±0.5mm Button operation_Operation limit position Max. 0mm Light source Infrared LED(940nm) Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 35mA Operation load Max. 3N(Max. 0.3kgf) Operation mode Dark ON(output ON when button ispushed) Control output NPN open collector Connection type Cable type(Ø3, 1m) Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP40 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH External input_Response Max. 1ms Material Case: Polycarbonate + Glass fiber, Button: Polyoxymethylene, Sleeve: SUS304(steel use Stainless 304) Weight Approx. 50g(approx. 30g)
$31.48
Autonics Autonics photoelectric micro sensor Push Button Type BS5-P1ML-P
Operation method Push Button Type Button operation_Stop position 5.0±0.4mm Button operation_Output switching position 4.0±0.5mm Button operation_Operation limit position Max. 0mm Light source Infrared LED(940nm) Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 35mA Operation load Max. 3N(Max. 0.3kgf) Operation mode Light ON(output OFF when button ispushed) Control output PNP open collector Connection type Cable type(Ø3, 1m) Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP40 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH External input_Response Max. 1ms Material Case: Polycarbonate + Glass fiber, Button: Polyoxymethylene, Sleeve: SUS304(steel use Stainless 304) Weight Approx. 50g(approx. 30g)
$27.78
Autonics Autonics photoelectric micro sensor Push Button Type BS5-P1ML-P-U
Operation method Push Button Type Button operation_Stop position 5.0±0.4mm Button operation_Output switching position 4.0±0.5mm Button operation_Operation limit position Max. 0mm Light source Infrared LED(940nm) Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 35mA Operation load Max. 3N(Max. 0.3kgf) Operation mode Light ON(output OFF when button ispushed) Control output PNP open collector Connection type Cable type(Ø3, 1m) Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP40 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH External input_Response Max. 1ms Material Case: Polycarbonate + Glass fiber, Button: Polyoxymethylene, Sleeve: SUS304(steel use Stainless 304) Weight Approx. 50g(approx. 30g)
$31.48
Autonics Autonics photoelectric micro sensor Push Button Type BS5-P1ML-U
Operation method Push Button Type Button operation_Stop position 5.0±0.4mm Button operation_Output switching position 4.0±0.5mm Button operation_Operation limit position Max. 0mm Light source Infrared LED(940nm) Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 35mA Operation load Max. 3N(Max. 0.3kgf) Operation mode Light ON(output OFF when button ispushed) Control output NPN open collector Connection type Cable type(Ø3, 1m) Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP40 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH External input_Response Max. 1ms Material Case: Polycarbonate + Glass fiber, Button: Polyoxymethylene, Sleeve: SUS304(steel use Stainless 304) Weight Approx. 50g(approx. 30g)
$31.48
Autonics Autonics photoelectric micro sensor Through-beam type BS3-F1M
Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight Approx. 50g Power voltage 5-24VDC ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output NPN open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Connection type Ø2.5mm, 4-wire, 1m Core AWG28 (0.08mm), 19-core, insulator out diameter: Ø0.65mm Material Case: PBT, Sensing part: PC
$12.94
