Hydraulic / Pneumatic tools

VESSEL AIR Nipper Blade Standard N3AS Features The AS at the end of the product number is a standard type and is a general blade used for cutting copper wire, iron wire, etc. The HS at the end of the product number is brazed with high-speed steel to improve durability. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS3, GT-N3, GT-NR3 Shape: Standard Cutting capacity (mm) Copper wire: 1.0 Cutting capacity (mm) Iron wire: 0.5 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

VESSEL AIR Nipper Blade Standard N30AS Features Standard type. A general blade used for cutting copper wire, iron wire, etc. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS30, GT-N30, GT-NR30, GT-NB30 Shape: Standard Cutting capacity (mm) Copper wire: 3.3 Cutting capacity (mm) Iron wire: 2.8 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

SP AIR SP-5000GE  1" Impact Wrench ,8"Long Spec  Spec of SP-5000GE Bolt Capacity 50 mm Max Torque 2700 Nm Working Torque Range 280-1900 Nm Free Speed 3,000 rpm Length 635 mm Weight 17.9 kg Hammer Mechanism Pinless

Read more less

SP AIR light weight impact wrench 12.7 mm square,SP-7140(1/2SQ) Features Equipped with a rubber grip that is easy to hold and does not slip. Built-in air regulator. The reverse side (loose) is powered up with a built-in bias motor. Use Tire work for passenger cars, U-bolt attachment / detachment work for light trucks, etc. Product specifications Specifications / standards Operating air pressure: 0.62MPa Recommended hose inner diameter: 6.35 mm Capacity Bolt diameter (mm): 16 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 450 No-load rotation speed (min (-1st power)): 5800 Air consumption ((M3) / min): 0.6 Hose mounting port: NPT1 / 4 Exhaust: Down Overall length (mm): 185 Hammer type: Twin hammer No-load rotation speed (rpm): 5800 Capacity bolt diameter

Read more less

Nitto Kohki Air Sonic Axial Sander L-35C The perfect tool for all tasks. Fast and powerful with an extremely efficient muffler and rear exhaust system. Works on all metals, wood and plastics, even very hard materials. And now that performance has been increased by the addition of an air silencer and a new rear exhaust system for grinding dust, it is even more an ideal tool for tool shops and workshops. The extraordinary performance of the muffler enables all craftsmen to work longer with less irritation from noise. For precision grinding, deburring machine parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastic. It is a compact, easy-to-use air tool for all tasks.   Sleeve Size: 6 mm Free Speed ​​(RPM): 37.500 min-1 Air consumption (no load): 0.35 m³ / min Mass (weight): 0.45 kg (without hose) Standard accessories: 14 mm spanner: 1 pc. Wheel mounted 13 x 13 x 6 x 38: 1 pc. Sleeve PT1 / 4 x NPT 1/4: 1 pc.

Read more less

Nitto Kohki Shank Sander L-25B The perfect tool for all tasks. Fast and powerful with an extremely efficient muffler and rear exhaust system. Works on all metals, wood and plastics, even very hard materials. And now that performance has been increased by the addition of an air silencer and a new rear exhaust system for grinding dust, it is even more an ideal tool for tool shops and workshops. The extraordinary performance of the muffler enables all craftsmen to work longer with less irritation from noise. For precision grinding, deburring machine parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastic. It is a compact, easy-to-use air tool for all tasks.   Sleeve Size: 6 mm Free Speed ​​(RPM): 27,000 min-1 Air consumption (no load): 0.4 m³ / min Mass (weight): 0.6 kg (without hose) Standard accessories: 14 mm spanner: 1 pc. Mounted wheel no.2: 1 pc. Installed wheel no.3: 1 pc. Block pin: 1 pc. Sleeve PT1 / 4 x NPT 1/4: 1 pc.

Read more less

Nitto Kohki Shank Grinder AL-55A Smooth, fast rotation and low vibration enable precise grinding, stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications, compact and lightweight for comfortable working for a long time, triangular handle adapted to the operator's hand, special plastic handle prevents cold hands and absorbs vibrations, rear exhaust system. Sleeve Size: 3 mm Free Speed ​​(RPM): 56.500 min-1 Air consumption (no load): 0.17 m3 / min Mass (weight): 0.27 kg Standard accessories: Sleeve R1 / 4 x NPT 1/4: 1 pc. Wheel mounted 5 x 13 x 3: 1 pc. Key 7: 1 pc. Open ended spanner 7 x 9: 1 pc  

Read more less

VESSEL AIR Nipper Blade Standard N20AS Features Standard type. A general blade used for cutting copper wire, iron wire, etc. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS20, GT-N20, GT-NR20, GT-NB20 Shape: Standard Cutting capacity (mm) Copper wire: 2.6 Cutting capacity (mm) Iron wire: 2.0 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

VESSEL AIR Nipper Blade Standard N7AS Features Standard type. A general blade used for cutting copper wire, iron wire, etc. For cutting and caulking general steel wires and resins. High-speed steel (high-speed steel): When durability is required more than special alloy steel, such as when cutting piano wire. specification Compatible models: GT-NS7, GT-N7, GT-NR7 Shape: Standard Cutting capacity (mm) Copper wire: 1.6 Cutting capacity (mm) Iron wire: 1.0 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Material / Finish: Special alloy steel Country of origin: Japan

Read more less

VESSEL AIR Nipper Blade Standard N5AS Features AS at the end of the product number is a standard type and is a general blade used for cutting copper wire, iron wire, etc. The HS at the end of the product number is brazed with high-speed steel to improve durability. Use For cutting and caulking general steel wires and resins. High-speed steel: When you need more durability than special alloy steel, such as when cutting piano wire. Product specifications Specifications / standards Compatible models: GT-NS5, GT-N5, GT-NR5 Cutting capacity (mm) Copper wire: 1.0 Cutting capacity (mm) Iron wire: 0.5 Cutting ability (mm) Piano wire:- Cutting capacity (mm) Soft resin:- Cutting capacity (mm) Hard resin:- Cutting capacity (mm) Bare terminal:- Shape: Standard

Read more less

VESSEL AIR Nipper GTN30 Features It is compatible with a separate blade and has a wide range of applications. It is safer and more efficient, and leads to less fatigue. For cutting and caulking of resin and metal. specification Pressurized pressure (N): 2744 Cutting capacity (mm) Iron wire: 2.8 Spare blade for iron / copper: N30AS, N30BBB For spare blade resin: N30AP, N30AJ, N30AJL, N30PF, N30AE, NM30AJ, NM30AP, NM30AE Air consumption (cm3 / time): 584 Cutting capacity (mm) Copper wire: 3.3 Working air pressure (MPa): 0.5-0.6 Overall length (mm): 185 Cutting ability (mm) Piano wire: 1.2 Cutting capacity (mm) Soft resin: 10.0 Cutting capacity (mm) Hard resin: 6.5 Bare terminal: 1.25 / 2mm2 Frame angle (mm): 56 Material / Finish: Steel die-cast Country of origin: Japan

Read more less

VESSEL AIR Nipper GTN20 Features It is compatible with a separate blade and has a wide range of applications. It is safer and more efficient, and leads to less fatigue. For cutting and caulking of resin and metal. specification Pressurized pressure (N): 1372 Cutting capacity (mm) Iron wire: 2.0 Spare blade for iron / copper: N20AS, N20HS, N20AG, N20BFB For spare blade resin: N20AP, N20AJ, N20AJL, N20AJB, N20PF, N20AE, N20AH, N20AML1498, NM20AJ, NM20AP, NM20AE Air consumption (cm3 / time): 230 Cutting capacity (mm) Copper wire: 2.6 Working air pressure (MPa): 0.5-0.6 Overall length (mm): 148 Cutting ability (mm) Piano wire: 1.0 Cutting capacity (mm) Soft resin: 7.0 Cutting capacity (mm) Hard resin: 5.0 Bare terminal:- Frame angle (mm): 45 Material / Finish: Steel die-cast Country of origin: Japan

Read more less

VESSEL AIR Impact air Driver GTP6. 5D Spec Bit receptacle (mm): 6.35 capacity screw Dimensions (mm): 6 - 8 maximum clamping torque (N, m): 57.2 no load Speed r.p.m. (rpm): 8500 Air consumption (m3/min): 0.38 Hose inlet: Rc1/4 exhaust: Front Length (mm): 152 Mass (kg): 1.45 use Air Pressure: 0. 6MPa chuck method: one touch type Conform bit: Domestic Standard Type (13mm) Application: side, upward or downward, various directions in screw tightening. field-work. Country of origin: Japan Weight: 1.45kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTP6. 5D

Read more less

VESSEL AIR impact type air driver GTPLH2 Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact and lightweight, it provides a strong tightening force. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Use For downward screw tightening. For work on the assembly line. Product specifications Specifications / standards Operating air pressure: 0.6MPa Bit outlet (mm): 6.35 Capacity Screw size (mm): 5 to 6 Maximum tightening torque (N ・ m): 40.5 No-load rotation speed (min (-1st power)): 8500 Air consumption ((M3) / min): 0.30 Hose mounting port: Rc1 / 4 Exhaust: Upper Overall length (mm): 213 No-load rotation speed (rpm): 8500 Compatible bit: Domestic standard type (13 mm) Chuck method: Bit sleeve type

Read more less

VESSEL AIR Impact Air Driver GTS6MLR　 Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact and lightweight, it provides a strong tightening force. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Use For downward screw tightening. For work on the assembly line. Product specifications Specifications / standards Operating air pressure: 0.6MPa Bit outlet (mm): 6.35 Capacity Screw size (mm): 5 to 6 Maximum tightening torque (N ・ m): 31.0 No-load rotation speed (min (-1st power)): 8500 Air consumption ((M3) / min): 0.25 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 215 No-load rotation speed (rpm): 8500 Compatible bit: Domestic standard type (13 mm) Chuck method: Bit sleeve type

Read more less

VESSEL AIR Impact type air driver GTS6.5D Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact, lightweight and strong tightening force can be obtained. Stable tightening is possible because it is a 1-turn 2-stroke type. For downward screw tightening. For work on the assembly line. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): 6-8 Maximum tightening torque (N ・ m): 57.2 No-load rotation speed (min ^ -1): 7500 Air consumption (m3 / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 217 Chuck method: Bit sleeve type No-load rotation speed (rpm): 7500 Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact type air driver GT PLR Features Stable tightening is possible because of the double hammer (1 rotation, 2 hits). Compact and lightweight, it provides a strong tightening force. Fast tightening speed and excellent workability. For downward screw tightening. For work on the assembly line. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): 4-5 Maximum tightening torque (N ・ m): 16.8 No-load rotation speed (min ^ -1): 9000 Air consumption (m3 / min): 0.20 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 187 Chuck method: Bit stop ball type No-load rotation speed (rpm): 9000 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Air Driver GT-S6LXD Spec Bit receptacle (mm): 6.35 capacity screw Dimensions (mm): 5 - 6 maximum clamping torque (N, m): 48 no load Speed r.p.m. (rpm): 12000 Air consumption (m3/min): 0.4 Hose inlet: G1/4 exhaust: 360 ° Length (mm): 212 noise level (dB): LpA/86. 2 LwA/97 2 Mass (kg): 0.82 use Air Pressure: 0. 6MPa chuck method: bit Sleeve type Straight type silencer with Vibration value (m/s2): 12.47 aluminum Application: housing, Refrigerator, TV, Bicycle, motorcycles, rolling stock, and pneumatic equipment various assembly line. Country of origin: Japan Weight: 0.82kg Set content: Bit /A14 + 2x65G, Outlet /BPN - 2F, Rotation section hydraulic oil V G-10, hydraulic oil V G-32 * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTS6LXD

Read more less

VESSEL AIR Driver GT-PLXD Features The oil lubrication method reduces noise. The jarring hammer hitting sound changes to a soft sound quality. There is no seizure of the hammer part and it is highly durable. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Sash, air conditioner, water heater, refrigerator, TV, kitchen equipment, housing, pneumatic equipment, bicycle, motorcycle, home appliance recycling, OA equipment recycling, etc. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): Normal screw diameter M4.0-5.0 / Tapping screw 3.8-4.2 Maximum tightening torque (N ・ m): 19.5 No-load rotation speed (min ^ -1): 11000 Air consumption (m3 / min): 0.35 Hose mounting port: G1 / 4 Exhaust: 360 ° Overall length (mm): 198.5 Chuck method: Bit sleeve type Noise level (dB): 88 No-load rotation speed (rpm): 11000 Capacity: Normal screw diameter M4.0-5.0mm Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.6MPa 6.35mm hex bit sleeve type Hose fitting: G 1/4 Vibration value (m / s2): 20.26 Set contents: Bit (A14 + 2 x 65G), outlet (BPN-2F) Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Driver GT-S4.5XD Features The oil lubrication method reduces noise. The jarring hammer hitting sound changes to a soft sound quality. There is no seizure of the hammer part and it is highly durable. Stable tightening is possible because it is a 1-turn 2-stroke type. Compact, lightweight and strong tightening force can be obtained. Use Sash, air conditioner, water heater, refrigerator, TV, kitchen equipment, housing, pneumatic equipment, bicycle, motorcycle, home appliance recycling, OA equipment recycling, etc. Product specifications Specifications / standards Operating air pressure: 0.6MPa 6.35mm hex bit sleeve type Hose fitting: G 1/4 Vibration value (m / s2): 20.26 Bit outlet (mm): 6.35 Capacity Screw size (mm): Normal screw diameter M4.0-5.0 / Tapping screw 3.5-4.0 Maximum tightening torque (N ・ m): 23.5 No-load rotation speed (min (-1st power)): 14500 Air consumption ((M3) / min): 0.20 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 188 No-load rotation speed (rpm): 14500 Capacity: Normal screw diameter M4.0-5.0mm Compatible bit: Domestic standard type (13 mm) Noise level (dB) Chuck method: Bit sleeve type

Read more less

VESSEL AIR driver deceleration type GTH5R Features There is little variation in tightening torque, and reliable and stable tightening can be performed. Since there is little impact operation, there is little vibration and noise, which contributes to improving the work environment. It has excellent durability because there is little wear on the parts. For assembly lines of electronic devices. specification Bit outlet (mm): 6.35 Capacity Screw size (mm): 4-5 Maximum tightening torque (N ・ m): 6.5 No-load rotation speed (min ^ -1): 1500 Air consumption (m3 / min): 0.25 Hose mounting port: G1 / 4 Exhaust: sideways Overall length (mm): 225 Chuck method: Bit stop ball type No-load rotation speed (rpm): 1500 Compatible bit: Domestic standard type (13 mm) Operating air pressure: 0.6MPa Lever push start type Set contents: Bit (A14 + 2 x 65G), outlet (BPN-2F) Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR driver deceleration type GTH4R Features There is little variation in tightening torque, and reliable and stable tightening can be performed. Since there is little impact operation, there is little vibration and noise, which contributes to improving the work environment. It has excellent durability because there is little wear on the parts. Use For assembly lines of electronic devices. Product specifications Specifications / standards Operating air pressure: 0.6MPa Lever push start type Bit outlet (mm): 6.35 Capacity Screw size (mm): 3-4 Maximum tightening torque (N ・ m): 3.0 No-load rotation speed (min (-1st power)): 1500 Air consumption ((M3) / min): 0.20 Hose mounting port: G1 / 4 Exhaust: 360 ° Overall length (mm): 190 Chuck method: Bit stop ball type No-load rotation speed (rpm): 1500 Compatible bit: Domestic standard type (13 mm)

Read more less

VESSEL AIR Micro Grinder GTMG55SR Features Precision motor processing and double bearings suppress runout. High-speed rotation realizes high runout accuracy and light and smooth grinding. Compact and lightweight, it maintains stable performance for a long time. Since the exhaust hose is attached, oil etc. will not scatter at hand. For precision grinding. Deburring of press punched products. Mold cutting, polishing, mirror processing. Grinding and engraving of various dies, surface finishing of castings and welds, deburring after machining, finishing of complicated curved surfaces, internal grinding, chamfering of gears, etc. specification Chuck inner diameter (mm): 3 No-load rotation speed (min ^ -1): 55000 Air consumption (m3 / min): 0.160 Hose mounting port: Rc1 / 4 Exhaust: Rear Overall length (mm): 180 No-load rotation speed (rpm): 55000 Operating air pressure: 0.6MPa Exhaust direction: Rear, with silencer Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench GTP18J Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 16 to 20 Socket insertion angle (mm): 19.0 Maximum tightening torque (N ・ m): 470.7 No-load rotation speed (min ^ -1): 5000 Air consumption (m3 / min): 0.52 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 240 Hammer type: Single hammer No-load rotation speed (rpm): 5000 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench GT2000P Features Strong tightening is possible because it is a one-turn, one-stroke type. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 16 to 20 Socket drive angle (mm): 19.0 Maximum tightening torque (N ・ m): 470.7 No-load rotation speed (min (-1st power)): 5000 Air consumption ((M3) / min): 0.45 Hose mounting port: Rc1 / 4 Exhaust: forward Overall length (mm): 241 Hammer type: Single hammer No-load rotation speed (rpm): 5000

Read more less

VESSEL AIR Impact Wrench GTP12 Features Strong tightening is possible because it is a one-turn, one-stroke type. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 12-14 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 294.1 No-load rotation speed (min (-1st power)): 7500 Air consumption ((M3) / min): 0.40 Hose mounting port: Rc1 / 4 Exhaust: forward Overall length (mm): 185 Hammer type: Single hammer No-load rotation speed (rpm): 7500

Read more less

VESSEL AIR Impact Wrench GTP14J Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 14 to 16 Socket insertion angle (mm): 12.7 Maximum tightening torque (N ・ m): 323.6 No-load rotation speed (min ^ -1): 6500 Air consumption (m3 / min): 0.42 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 197 Hammer type: Single hammer No-load rotation speed (rpm): 6500 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench double Hammer　GTP80W Spec Bolt Diameter (mm): 8 - 10 Socket Bayonet angle (mm): 12.7 maximum clamping torque (N, m): 259.8 no load Speed r.p.m. (rpm): 7500 Air consumption (m3/min): 0.40 Hose mounting opening: Rc1/4 exhaust: Front Length (mm): 164 Hammer Type: Double Hammer Mass (kg): 1.89 use Air Pressure: 0. 6MPa Application: General industrial, assembly, minutes solution work. Country of origin: Japan Weight: 1.89kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTP80W

Read more less

VESSEL AIR Impact Wrench GT1600P Features Strong tightening is possible because it is a one-turn, one-stroke type. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 14 to 16 Socket drive angle (mm): 12.7 Maximum tightening torque (N ・ m): 308.9 No-load rotation speed (min (-1st power)): 6700 Air consumption ((M3) / min): 0.36 Hose mounting port: Rc1 / 4 Exhaust: forward Overall length (mm): 196 Hammer type: Single hammer No-load rotation speed (rpm): 6700

Read more less

VESSEL AIR Impact Wrench GT1400P GT-1400P Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 12-14 Socket insertion angle (mm): 12.7 Maximum tightening torque (N ・ m): 294.1 No-load rotation speed (min ^ -1): 7000 Air consumption (m3 / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 182 Hammer type: Single hammer No-load rotation speed (rpm): 7000 Operating air pressure: 0.6MPa Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench Double Hammer GTP65W Features Stable tightening is possible with 1 rotation and 2 strokes. It has excellent durability and is ideal for use on frequently used production lines. For general industry, assembly, and disassembly work. specification Capacity Bolt diameter (mm): 6-8 Socket insertion angle (mm): 9.5 Maximum tightening torque (N ・ m): 121.6 No-load rotation speed (min ^ -1): 8500 Air consumption (m3 / min): 0.38 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 146 Hammer type: Double hammer No-load rotation speed (rpm): 8500 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench GTP6-2 GT-P6-2 Features Strong tightening is possible because it is a one-turn, one-stroke type. For industrial and automobile maintenance industries that require high torque. specification Capacity Bolt diameter (mm): 6-8 Socket insertion angle (mm): 9.5 Maximum tightening torque (N ・ m): 121.6 No-load rotation speed (min ^ -1): 8500 Air consumption (m3 / min): 0.38 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 146 Hammer type: Single hammer No-load rotation speed (rpm): 8500 Operating air pressure: 0.6MPa Note: The tightening torque is a guideline. The torque value changes depending on the conditions. Country of origin: Japan

Read more less

VESSEL AIR Impact Wrench Double Hammer GTS60CW Features Stable tightening is possible because it hits 2 times in 1 rotation. Has excellent durability on frequently used lines. Use For general industry, assembly, and disassembly work. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 6-8 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 47.0 No-load rotation speed (min (-1st power)): 7300 Air consumption ((M3) / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 255 Hammer type: Double hammer No-load rotation speed (rpm): 7300

Read more less

VESSEL AIR Air Impact Wrench double Hammer GTS70 WK Spec Bolt Diameter (mm): 6 - 8 Socket Bayonet angle (mm): 9.5 maximum clamping torque (N, m): 176.5 no load Speed r.p.m. (rpm): 7000 Air consumption (m3/min): 0.39 Hose mounting opening: Rc1/4 exhaust: Back Length (mm): 231 Hammer Type: Double Hammer Mass (kg): 1.3 use Air Pressure: 0. 6MPa Application: General industrial, assembly, minutes solution work. Country of origin: Japan Weight: 1.3kg * tightening torque is standard value. conditions by the torque value instead. Manufacturer's model number: GTS70WK

Read more less

VESSEL AIR Impact Wrench Single Hammer GTS650 Features Strong tightening is possible because it is a one-turn, one-stroke type. It is tightened with an air motor and has excellent durability. Use For industrial and automobile maintenance industries that require high torque. Product specifications Specifications / standards Operating air pressure: 0.6MPa Capacity Bolt diameter (mm): 6-8 Socket drive angle (mm): 9.5 Maximum tightening torque (N ・ m): 121.6 No-load rotation speed (min (-1st power)): 7500 Air consumption ((M3) / min): 0.35 Hose mounting port: Rc1 / 4 Exhaust: sideways Overall length (mm): 210 Hammer type: Single hammer No-load rotation speed (rpm): 7500

Read more less

KUANI  New 90º Degree 3/8" Chuck 1,800 RPM Air Angle Drill 10mm Reversible KP-504A Model No : KP-5404A 3/8" Chuck Rear Exhaust Reliable tool fr drilling sheet metal, wood and composites. Reversing at the touch of a button - lever gives precise speed control Its angle head, is the perfect tool for working in confined spaces because it is compact and lightweight. Free Speed : 1,800rpm Bolt Size : 10mm Weight : 1,100g Oveall Length : 209mm

Read more less

KUANI  1/2" Square Dr. 8,000 RPM Super Duty Air Impact Wrench KP-1480 for Automotive Model No : KP-1480 Smooth & Efficient one-handle F/R control High Torque Performance & Speed Well balanced ergonomic design. For Premium Choice in Tire-Service Centers Twin Hammer Clutch 1/2" Square Driver. Rear Exhaust Free Speed : 8,000rpm Bolt Size : 16mm Maximum Torque : 1,220N.m (900Ft-lb) Air consumption : 6.7cfm, 190L/min Weight : 2,300g (5.07lb) Oveall Length : 197mm (7.8")

Read more less

KUANI  1/2" Square Dr. 6,500 RPM Super Duty Air Impact Wrench KP-1018 Model No : KP-1018 Twin Hammer Clutch 1/2" Square Driver. Rear Exhaust Free Speed : 6,500rpm Bolt Size : 16mm Maximum Torque : 949N.m Weight : 2,560g Oveall Length : 200mm

Read more less

KUANI  1/2" Square Dr. 7,000 RPM Super Duty Air Impact Wrench KP-1316 for Automotive Model No : KP-1316(=IR-231C-AP) Twin Hammer Clutch 1/2" Square Driver. Front Exhaust Free Speed : 7,000rpm Bolt Size : 16mm Maximum Torque : 814N.m Weight : 2,560g Oveall Length : 180mm

Read more less

KUANI  1/2" Square Dr. 7,000 RPM Super Duty Air Impact Wrench KP-1440 Model No : KP-1440 Twin Hammer Clutch 1/2" Square Driver. Front Exhaust Free Speed : 7,000rpm Bolt Size : 16mm Maximum Torque : 814N.m Weight : 2,800g Oveall Length : 180mm

Read more less

KUANI  1/2" Sq. Dr.Super Duty Air Impact Wrench KP-1469 for Farm Vehicles & Automotive Model No : KP-1469 Short and tough, easy access to limited space Recommended applications - Engine bay, Automotive chassis & Farm vehicles. Jumbo Hammer Cluch Type 1/2" Square Dr. Rear Exhaust Free Speed : 6,500rpm Bolt Size : 14mm Maximum Torque : 678N.m Weight : 1,550g (3.42lb) Oveall Length : 116mm (4.6") Air Consumption : 2.5cfm.  7.1L/min

Read more less

KUANI  3/8" Square Dr. 360º Swivel Air Impact Wrench 10,000RPM KP-1010 Butterfly Style Model No : KP-1010 3/8" Square Driver. Free Speed : 10,000rpm Bolt Size : 10mm (3/8") Maximum Torque : 102N.m (75ft-lb) Average air consumption : 84.9 L/min or 3cfm Weight : 800g Oveall Length : 139mm

Read more less

KUANI  1/2" Square Dr. Air Ratchet Wrench 225rpm KP-2402 Air Tools Model No : KP-2402 1/2" Square Driver. Side Exhaust Bolt Size : 13mm Free Speed : 225rpm Maximum Torque : 136N.m Weight : 1,620g Length : 315mm  

Read more less

KUANI  1/2" Square Dr. Air Ratchet Wrench 150rpm KP-2603 Front Exhaust Air Tools Model No : KP-2603 1/2" Square Driver. Front Exhaust Bolt Size : 12mm Free Speed : 150rpm Maximum Torque : 122N.m Weight : 2,000g Length : 360mm  

Read more less

KUANI  3/8" Square Dr. Air Ratchet Wrench 270rpm KP-2302 Rear Exhaust Air Tools Model No : KP-2302 3/8" Square Driver. Rear Exhaust Bolt Size : 8mm Free Speed : 270rpm Maximum Torque : 54N.m Weight : 660g Length : 210mm 1 piece  

Read more less

KUANI  3/8" Square Dr. Mini Air Ratchet Wrench 250rpm KP2410 Rear Exhaust Air Tools Model No : KP-2410 * 3/8" Square Driver. * Rear Exhaust * Bolt Size : 1/4" M6 * Free Speed : 250rpm * Maximum Torque : 20ft-lb 27n.m * Avrage Air Consumption : 2.5 cfm 62 l/min * Weight : 520g * Length : 175mm

Read more less

KUANI  1/4" Square Dr. Mini Air Ratchet Wrench 250rpm KP2110 Rear Exhaust Air Tools * Model No : KP-2110 * 1/4" Square Driver. * Rear Exhaust * Bolt Capacity : 6mm * Free Speed : 250rpm * Maximum Torque : 20ft-lb 27N.m * Weight : 520g * Length : 175mm

Read more less

SP AIR Air shear SP-1710S Features Sharp sharpness with steel finish The blade can be re-polished Since it is a 2-flute scissors, it does not produce cutting residue. For general automobile sheet metal cutting work specification Overall length (mm): 270 Cutting capacity (mm): Iron plate 1.2 Aluminum 1.2 Stainless steel 1.0 Working air pressure (Mpa): 0.62 Hose connection (NPT): 1/4 Mass (kg): 1.25

Read more less