Sockets & Ratchets

GENIUS TOOLS 1/2" Dr. 6 pt. Metric Deep Impact Sockets Cr-Mo SPECIFICATIONS Product Code. A D1 D2 Length Weight mm mm mm mm G 200-2765 8 15 24 78 130 201-1587 9 16 24 78 140 200-2774 10 17 24 78 140 200-2783 11 18 24 78 140 200-2792 12 20 24 78 140 200-2808 13 21 24 78 150 200-2817 14 22 24 78 150 200-2826 15 24 24 78 160 200-2835 16 24 24 78 170 200-2844 17 26 26 78 180 200-2853 18 27 27 78 190 200-2862 19 29 29 78 230 200-2871 20 30 30 78 240 200-2880 21 30 30 78 250 200-2899 22 32 30 78 260 200-2905 23 34 30 78 300 200-2914 24 35 30 78 300 200-2923 25 36 30 78 300 200-2932 26 37 30 78 310 200-2941 27 39 30 78 340 200-2950 28 40 30 78 350 200-2969 29 41 30 78 360 200-2978 30 42 30 78 380 200-2987 32 45 30 78 460 200-8176 33 46 35 78 480 200-8185 34 48 35 78 510 200-8194 35 48 35 78 520 200-8200 36 50 35 78 530 200-8219 38 52 35 78 570 200-9917 41 57 35 78 600   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 1/2" Dr. 12 pt. Metric Hand Sockets SPECIFICATIONS   Product Code. A D1 D2 Length Weight mm mm mm mm G 200-0721 8 13 24 38 80 200-0730 9 14 24 38 80 200-0749 10 16 24 38 80 200-0758 11 17 24 38 80 200-0767 12 18 24 38 80 200-0776 13 19 24 38 80 200-0785 14 21 24 38 80 200-0794 15 22 24 38 80 200-0800 16 23 24 38 90 200-0819 17 24 24 38 100 200-0828 18 26 24 38 110 200-0837 19 27 25 40 130 200-0846 20 28 26 40 135 200-0855 21 29 27 40 140 200-0864 22 31 28 42 150 200-0873 23 32 29 42 170 200-0882 24 33 30 44 180 200-0891 25 34 31 44 190 200-0907 26 36 33 44 190 200-0916 27 37 34 46 200 200-0925 28 38 36 46 210 200-0934 29 39 36 46 220 200-0943 30 41 37 46 240 200-0952 32 43 40 46 260 201-1426 33 44 41 46 270 201-1435 35 47 43 48 340 201-1444 36 48 45 48 370 201-1462 38 51 47 48 410   SAFETY INFORMATION   • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/4" Dr. 6 pt. Metric Deep Hand Sockets SPECIFICATIONS   Product Code. A D1 D2 Length Weight mm mm mm mm G 201-1453 4 6.7 12 50 18 201-1471 4.5 7.3 12 50 18 200-3737 5 8 12 50 18 201-1480 5.5 8.6 12 50 18 200-3746 6 9.2 12 50 20 200-3755 7 10.8 12 50 24 200-3764 8 12 11.5 50 24 200-3773 9 13.2 12 50 26 200-3782 10 14.7 12.5 50 34 200-3791 11 16 13 50 38 200-3807 12 17 13.5 50 38 200-3816 13 18 14 50 45 200-8264 14 19.7 14.5 50 54   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes sudden breakage and can result in bodily injury

Read more less

GENIUS TOOLS 1/2" Dr. 6 pt. Metric Semi-Deep Thin Wall Impact Sockets Cr-Mo SPECIFICATIONS Product Code. A D1 D2 Length Weight mm mm mm mm G 200-9263 10 16 24 52 80 200-9272 11 17 24 52 80 200-9281 12 18 24 52 80 200-9290 13 19 24 52 90 200-9306 14 21 24 52 90 200-9315 15 22 24 52 100 200-9324 16 23 24 52 100 200-9333 17 24 24 52 100 200-9342 18 26 26 52 110 200-9360 19 27 27 52 120 200-9379 20 28 28 52 140 200-9388 21 29 29 52 150 200-9397 22 31 31 52 170 200-9403 23 32 32 52 190 200-9412 24 33 33 52 200   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

VESSEL Socket Adapter No.A20BSQ Pursuit of usability and durability Use your own sockets. Superior durability by press-fitting. PRODUCT SPEC Model Square drive size A/F ￠ D Overall Length (mm) Weight g A20BSQ2 1/4" (6.35mm) 8 45 20 A20BSQ3 3/8" (9.5mm) 13 54 26 A20BSQ4 1/2" (12.7mm) 16 59 44    

Read more less

GENIUS TOOLS  Pry Bars SPECIFICATIONS Product Code. Length Weight mm (inch) G 200-7478 200 (8") 100 200-7487 300 (1"2) 240 200-7496 450 (18") 550 200-7502 600 (24") 700

Read more less

  GENIUS TOOLS 3/8″ Dr. Hex Shank Bit Holder SPECIFICATIONS Product Code. Drive Hex Length Shank mm 201-5185 3/8" 1/4" 39 201-5194 3/8" 5/16" 39   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS Metric Long Hex Nut Drivers(with magnet) SPECIFICATIONS Product Code. Size L1 L2 Length Weight mm mm mm mm G 200-7335 6 150 8 245 95 200-7344 7 150 9 260 120 200-7353 8 150 9 260 120 200-7362 9 150 10 260 120 200-7371 10 150 11 260 120 200-7380 11 150 11 260 120 200-7399 12 150 12 260 120 200-7405 13 150 13 270 160 200-7414 14 150 14 270 160   SAFETY INFORMATION • Always wear safety gloves when working with screwdrivers.• Always use the proper screwdriver tip and make sure it fits securely onto the screw head to avoid damage.• Always choose a handle that fits your hand and always keep it clean. A greasy handle can cause slippage and injury.• Always use insulated screwdrivers when working on or near exposed energized live conductors. Never use screwdrivers with plastic or rubber handles for electrical applications.• Do not carry a screwdriver in your pocket. It can cause injury when fall.• Do not hold the workpiece in the hand or against the body while using a screwdriver. Use a clamp or vise to secure it where possible.• Do not place your fingers near the tip or blade of the screwdriver when tightening a screw.• Do not use a screwdriver as a punch, chisel, and pry bar for application. Use of damaged handles, tips or bent blades may cause severe hand injury.• Do not use excessive force if a screw can not be removed. Instead, use an impact driver or other method to release the screw without damaging both the tip and the screw.

Read more less

  GENIUS TOOLS 3/8" Dr. T-Handles (Ball Joint) SPECIFICATIONS Product Code. Length Weight mm G 200-8060 350 400 200-8079 500 500     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/2" Dr. Extension Bars SPECIFICATIONS Product Code. Length Weight mm G 200-6220 75 120 200-6239 125 185 200-6248 250 350   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS  T-Handle Spark Plug Sockets SPECIFICATIONS Product Code. Item No. Size Length Weight mm(inch) mm G 200-6956 4238016T 16(5/8) 380 420 200-6965 4253016T 16(5/8) 530 533 200-6974 4238021T 20.6(5/8) 380 490 200-6983 4253021T 20.6(13/16) 530 600 201-4265 4238014T 14(9/16) 380 420

Read more less

GENIUS TOOLS 3/8" Dr. SAE Impact Hex Head Drivers SPECIFICATIONS Product Code. A D Length Weight inch mm mm G 200-9795 5/32 19 52 35 200-9801 3/16 19 52 40 200-9810 7/32 19 52 40 200-9829 1/4 19 52 45 200-9838 5/16 19 52 55 200-9847 3/8 19 52 60 200-9856 7/16 20 52 70 200-9865 1/2 20 52 85 200-9874 9/16 20 52 95 200-9883 5/8 20 52 105   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 1/2" Dr. Spark Plug Sockets SPECIFICATIONS Product Code. Drive A D1 D2 Length Weight Size Size mm mm mm G 200-3898 1/2" 5/8"(16mm) 22 20.6 70 110 200-3904 1/2" 13/16"(20.6mm) 28 20.6 70 160

Read more less

GENIUS TOOLS 3/8" Dr. Swivel Spark Plug Sockets SPECIFICATIONS Product Code. Size Length Weight mm(inch) mm G 200-9944 16(5/8") 90 140 200-9953 20.6(13/16") 90 200

Read more less

GENIUS TOOLS Universal Joints SPECIFICATIONS Product Code. Dr Outside Length Weight inch Diameter mm G 200-5966 1/4 　 40 34 200-5975 3/8 18mm 54 90 200-5984 1/2 25mm 78 160

Read more less

GENIUS TOOLS 1/2" Dr. 6 pt. Metric Impact Sockets Cr-V SPECIFICATIONS Product Code. A D1 D2 Length Weight mm mm mm mm G 200-1793 8 15 24 38 80 200-1809 9 16 24 38 80 200-1818 10 17 24 38 80 200-1827 11 18 24 38 80 200-1836 12 20 24 38 80 200-1845 13 21 24 38 80 200-1854 14 22 24 38 80 200-1863 15 24 24 38 80 200-1872 16 24 24 38 90 200-1881 17 26 26 38 100 200-1890 18 27 27 38 110 200-1906 19 28 28 40 130 200-1915 20 29 29 40 135 200-1924 21 30 30 40 140 200-1933 22 32 32 42 150 200-1942 23 33 33 42 170 200-1951 24 34 34 44 180 200-1960 25 36 36 44 190 200-1979 26 37 37 44 190 200-1988 27 38 35 46 200 200-1997 28 40 35 46 210 200-2002 29 41 35 46 220 200-2011 30 42 35 46 240 200-2020 32 45 35 46 260   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

GENIUS TOOLS 1/4" Dr. Flexible Extensions  SPECIFICATIONS   Product Code. Hex Female Length Weight Shank Drive mm G 200-7308 1/4" 1/4" 150 65

Read more less

Smato Flexible Ratchet Handle 1/2"(72T)     - Push type (one-touch socket detachable)- Gear 72T- 180 degree head angle adjustable - 1/2 × 300 mm 

Read more less

GENIUS TOOLS Plastic Socket Holders SPECIFICATIONS   Product Code. Drive Weight Size G 200-7256 1/4" 4 200-7265 3/8" 4 200-7274 1/2" 5 200-7283 3/4" 10  

Read more less

  GENIUS TOOLS 1/2" Dr. Wobble Extension Bars SPECIFICATIONS Product Code. Length Weight mm G 200-6682 50 85 200-6691 75 115 200-6707 125 175 200-6716 200 270 200-6725 250 330 200-6734 375 485 200-6743 600 765     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/4" Dr. Wobble Extension Bars SPECIFICATIONS Product Code. Length Weight mm G 201-4210 50 23 201-4229 100 43 201-4238 150 63     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS  1/2" Dr. Impact Extension Bars Cr-Mo w/Steel Ball SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6512 w/Steel Ball 75 130 200-6521 w/Steel Ball 125 210 200-6530 w/Steel Ball 250 440     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 1/2" Dr. T-Handles (Ball Joint) SPECIFICATIONS Product Code. Length Weight mm G 200-8088 350 400 200-8097 500 500     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 3/8″ Dr. Impact Extension Bar w/Steel Ball SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6488 w/Steel Ball 75 90 200-6497 w/Steel Ball 125 140 200-6503 w/Steel Ball 200 210     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 1" Dr. Extension Bars SPECIFICATIONS Product Code. Length Weight mm G 200-6309 150 1170 200-6318 200 1520 200-6327 250 1880 200-6336 400 3040   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/2" Dr. T-Handles (Universal Joint) SPECIFICATIONS Product Code. Length Weight mm G 200-7016 500 1000 200-7025 700 1230     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 3/8" Dr. Slotted Head Drivers SPECIFICATIONS Product Code. TxW D Length Weight mm mm mm G 200-5805 1.0 x 5.5 19 60 50 200-5814 1.2 x 8.0 19 60 50 200-5823 1.6 x 10.0 19 60 60   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

 GENIUS TOOLS  1/2" Dr. Impact Extension Bars Cr-Mo w/Pin Hole SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6372 w/Pin Hole 75 130 200-6381 w/Pin Hole 125 210 200-6390 w/Pin Hole 250 440     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 3/8" Dr. Philips Head Drivers SPECIFICATIONS Product Code. A D Length Weight Size mm mm G 200-5887 19 60 50 200 200-5896 19 60 50 200 200-5902 19 60 50 200 200-5911 19 60 60 200   SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  SPECIFICATIONS Product Code. A D1 D2 Length Weight Size mm mm mm G 201-5051 E-8 11 22 38 50 200-5559 E-10 13 22 38 50 200-9157 E-11 14 22 38 50 200-5568 E-12 15 22 38 55 200-5577 E-14 17 22 38 55 200-5586 E-16 19 22 38 60 200-5595 E-18 21 24 40 80 200-5601 E-20 23 26 40 95 200-9166 E-22 25 26 40 100 200-5610 E-24 27 28 40 120   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS  3/8" Dr. E-Star Hand Sockets SPECIFICATIONS Product Code. A D1 D2 Length Weight Size mm mm mm G 200-5489 E-10 12 17 28 20 200-5498 E-11 13 17 28 25 200-5504 E-12 14 17 28 25 200-5513 E-14 16 18 28 30 200-5522 E-16 18 20 28 40 200-5531 E-18 21 22 30 55 200-5540 E-20 23 24 30 65     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS Rigid Carbon Scrapers SPECIFICATIONS Product Code. Blade Blade Overall Weight Style Width Length G 200-7539 Straight 12mm 250mm 160 200-7548 Straight 26mm 200mm 145 200-7557 Straight 26mm 300mm 190

Read more less

GENIUS TOOLS Socket Rails with Clips SPECIFICATIONS  Product Code. Drive Length Clips Pack Weight Size mm pcs pcs G 200-4222 1/4" 410 15 2 230 200-4231 3/8" 480 15 2 270 200-4240 1/2" 560 15 2 350 200-4259 3/4" 560 10 2 400

Read more less

  GENIUS TOOLS 1/2" Dr. Impact Bit Holders Cr-Mo SPECIFICATIONS Product Code. Hex Length Weight Shank mm G 200-4082 1/4" 41 55 200-4091 5/16" 41 60       SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 3/8" Dr. Wobble Extension Bars SPECIFICATIONS Product Code. Length Weight mm G 200-6628 45 45 200-6637 75 65 200-6646 150 115 200-6655 200 145 200-6664 300 215 200-6673 450 315     SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

GENIUS TOOLS 1/2" Dr. Triple Square Bit Sockets -110mmL SPECIFICATIONS Product Code. Size Length Weight mm G 201-0931 M5 110 75 201-0940 M6 110 80 201-0959 M8 110 90 201-0968 M10 110 130 201-0977 M12 110 170 201-0986 M14 110 210

Read more less

  GENIUS TOOLS 3/8" Dr. Impact Bit Holders Cr-Mo SPECIFICATIONS Product Code. Hex Length Weight Shank mm G 200-4064 1/4" 39 35 200-4073 5/16" 39 50       SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 3/4" Dr. Impact Extension Bars Cr-Mo w/Steel Ball SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6549 w/Steel Ball 100 600 200-6558 w/Steel Ball 150 700 200-6567 w/Steel Ball 200 880 200-6576 w/Steel Ball 250 1060     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 1" Dr. Impact Extension Bars Cr-Mo w/Steel Ball SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6585 w/Steel Ball 150 1170 200-6594 w/Steel Ball 200 1520 200-6600 w/Steel Ball 250 1880 200-6619 w/Steel Ball 400 2870     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 3/4" Dr. Impact Extension Bars Cr-Mo w/Pin Hole SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6406 w/Pin Hole 100 600 200-6415 w/Pin Hole 150 700 200-6424 w/Pin Hole 200 880 200-6433 w/Pin Hole 250 1060     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 3/8″ Dr. Impact Extension Bar w/pin hole SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6345 w/Pin Hole 75 90 200-6354 w/Pin Hole 125 140 200-6363 w/Pin Hole 200 210     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

  GENIUS TOOLS 1" Dr. Impact Extension Bars Cr-Mo w/Pin Hole SPECIFICATIONS Product Code. Male Length Weight Drive mm G 200-6442 w/Pin Hole 150 1170 200-6451 w/Pin Hole 200 1520 200-6460 w/Pin Hole 250 1880 200-6479 w/Pin Hole 400 2870     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

SPECIFICATIONS Product Code. Size Length Weight mm G 201-4566 M4 80 65 201-4575 M5 80 65 201-4584 M6 80 70 201-4593 M8 80 80 201-4609 M10 80 110 201-4618 M12 80 140 201-4627 M14 80 160 201-4636 M16 80 200

Read more less

GENIUS TOOLS 1/2" Dr. Pentacle Bit Sockets SPECIFICATIONS Product Code. Size Length Weight mm G 200-8325 T-20 55 63 200-8334 T-25 55 63 200-8343 T-27 55 63 200-8352 T-30 55 63 200-8361 T-40 55 63 200-8370 T-45 55 83 200-8389 T-50 55 83 200-8398 T-55 55 108

Read more less

GENIUS TOOLS 3/8" Dr. T-Handles (Universal Joint) SPECIFICATIONS Product Code. Length Weight mm G 200-6992 420 560 200-7007 700 800   SAFETY INFORMATION • Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always choose the right drive when working with ratchet. Use of small drive on tasks that require heavy turning can cause tool failure or bodily injury and vice versa.• Always pull the tools toward you. Do not push.• Always maintain ratchet on a regular basis. Dirt tends to build up over time in the ratchet head and if not cleaned properly, it can cause malfunction and possibly break breakage.• Do not use damaged or worn sockets or accessories.• Do not use hand socket or accessories on impact tools or power tools.• Do not apply excessive force when using reducers to avoid tightening the fastener.• Do not use ratchets as levers or as hammers.• Do not use pipes or other extensions to increase leverage on the ratchet or hinge handle. Doing so exposes a sudden breakage and can result in bodily injury.

Read more less

  GENIUS TOOLS 1/2" Dr. Star Head Drivers SPECIFICATIONS Product Code. A D Length Weight Size mm mm G 200-5391 T-10 24 76 75 200-5407 T-15 24 76 75 200-5416 T-20 24 76 75 200-5425 T-25 24 76 75 200-5434 T-27 24 76 75 200-5443 T-30 24 76 80 200-5452 T-40 24 76 80 200-5461 T-45 24 76 80 200-5470 T-50 26 76 95 200-9087 T-55 26 76 110 200-9096 T-60 26 76 120 200-9102 T-70 26 76 140     SAFETY INFORMATION • Always wear safety goggles and protective equipment while using any impact tool.• Always use the proper type and size of socket and make sure it fits securely onto the fastener. An oversize or sloppy fit can cause slippage and injury to both the socket and the fastener.• Always use retaining ring and pin to hold socket on impact tool.• Do not use damaged or worn sockets or accessories.• Do not run the impact tool while placing the socket over the nut.• Do not hold the socket or accessory while the tool is in operation.• Do not continue to drive with an impact socket once the fastener is tight.• Do not use hand sockets or accessories on impact tools.

Read more less

SPECIFICATIONS Product Code. Size Length Weight mm G 201-0870 M5 140 65 201-0889 M6 140 65 201-0898 M8 140 85 201-0913 M12 140 170 201-0922 M14 140 200

Read more less

GENIUS TOOLS 1/2" Dr. Triple Square Bit Sockets -150mmL SPECIFICATIONS Product Code. Size Length Weight mm G 201-0995 M5 150 85 201-1000 M6 150 90

Read more less