Torque Tools

TOHNICHI DB Dial Indicating Torque Wrench 2–2000 kgf·cm 1/4" driveA dial indicating wrench shows torque continuously on a dial as force is applied, so it reads what is actually happening at the joint rather than signalling one point. That makes it the tool for checking a joint as well as tightening one.Available Sizes 7–60 kgf·cm (5.88 N·m max), 1/4" drive (DB60M5-S) 100–1000 kgf·cm (98.1 N·m max), 1/2" drive (DB1000M-S) 200–2000 kgf·cm (196 N·m max), 1/2" drive (DB2000M-S) 14–120 kgf·cm (11.8 N·m max), 1/4" drive (DB120M5-S) 50–500 kgf·cm (49 N·m max), 3/8" drive (DB500M-S) 35–250 kgf·cm (24.5 N·m max), 3/8" drive (DB250M5-S) 3–30 kgf·cm (2.94 N·m max), 1/4" drive (30DB4-S) 2–15 kgf·cm (1.47 N·m max), 1/4" drive (15DB4-S) Key Features Continuous reading — usable for both tightening and audit checks Memory pointer holds the peak value for recording No click; the operator watches the dial Specifications Overall Length (mm) 205 Torque Range 7–60 kgf·cm (5.88 N·m max) Square Drive 1/4" drive Graduation 1 kgf·cm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI DQL Dual Square Drive Adjustable Click Torque Wrench 100–1000 N·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 100–550 N·m, 3/4" drive (DQLE550N2) 150–750 N·m, 3/4" drive (DQLE750N2) 200–1000 N·m, 25.4 mm drive (DQLE1000N2) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 1/189 Torque Range 100–550 N·m Square Drive 3/4" drive Graduation 5 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI DQL Dual Square Drive Adjustable Click Torque Wrench 40–280 N·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 695 Torque Range 40–280 N·m Square Drive 3/4" drive Graduation 2 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI DQL Dual Square Drive Adjustable Click Torque Wrench 40–200 N·m 1/2" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 490 Torque Range 40–200 N·m Square Drive 1/2" drive Graduation 2 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI DQL Dual Square Drive Adjustable Click Torque Wrench 10–100 kgf·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 10–55 kgf·m (539 N·m max), 3/4" drive (5500DQLE2) 15–75 kgf·m (735 N·m max), 3/4" drive (7500DQLE2) 20–100 kgf·m (981 N·m max), 25.4 mm drive (10000DQLE2) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 1/189 Torque Range 10–55 kgf·m (539 N·m max) Square Drive 3/4" drive Graduation 0.5 kgf·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI DQL Dual Square Drive Adjustable Click Torque Wrench 4–28 kgf·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 695 Torque Range 4–28 kgf·m (275 N·m max) Square Drive 3/4" drive Graduation 0.2 kgf·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI DQL Dual Square Drive Adjustable Click Torque Wrench 400–2000 kgf·cm 1/2" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 490 Torque Range 400–2000 kgf·cm (196 N·m max) Square Drive 1/2" drive Graduation 20 kgf·cm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 40–280 N·m 22D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 655 Torque Range 40–280 N·m Graduation 2 N·m Head Mount Size 22D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 0.4–200 N·m 10D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 5–25 N·m, 10D head mount (CL25Nx10D-MH) 10–50 N·m, 12D head mount (CL50Nx12D-MH) 20–100 N·m, 15D head mount (CL100Nx15D-MH) 30–140 N·m, 15D head mount (CL140Nx15D-MH) 40–200 N·m, 19D head mount (CL200Nx19D-MH) 10–50 N·m, 15D head mount (CL50Nx15D-MH) 0.4–2 N·m, 8D head mount (CL2Nx8D-MH) 1–5 N·m, 8D head mount (CL5Nx8D-MH) 2–10 N·m, 8D head mount (CL10Nx8D-MH) 3–15 N·m, 8D head mount (CL15Nx8D-MH) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 200 Torque Range 5–25 N·m Graduation 0.25 N·m Head Mount Size 10D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 4–28 kgf·m 22D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 655 Torque Range 4–28 kgf·m (275 N·m max) Graduation 0.2 kgf·m Head Mount Size 22D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 4–2000 kgf·cm 10D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 50–250 kgf·cm (24.5 N·m max), 10D head mount (225CL-MH) 100–500 kgf·cm (49 N·m max), 12D head mount (450CL-MH) 200–1000 kgf·cm (98.1 N·m max), 15D head mount (900CL-MH) 300–1400 kgf·cm (137 N·m max), 15D head mount (1400CL-MH) 400–2000 kgf·cm (196 N·m max), 19D head mount (1800CL-MH) 100–500 kgf·cm (49 N·m max), 15D head mount (500CL-MH) 4–20 kgf·cm (1.96 N·m max), 8D head mount (20CL-MH) 10–50 kgf·cm (4.9 N·m max), 8D head mount (50CL-MH) 20–100 kgf·cm (9.81 N·m max), 8D head mount (100CL-MH) 30–150 kgf·cm (14.7 N·m max), 8D head mount (150CL-MH) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 200 Torque Range 50–250 kgf·cm (24.5 N·m max) Graduation 2.5 kgf·cm Head Mount Size 10D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 100–1200 N·m 27D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 100–550 N·m, 27D head mount (CLE550N2x27D) 150–750 N·m, 27D head mount (CLE750N2x27D) 200–850 N·m, 32D head mount (CLE850N2x32D) 300–1200 N·m, 32D head mount (CLE1200N2x32D) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 1/148 Torque Range 100–550 N·m Graduation 5 N·m Head Mount Size 27D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 40–420 N·m 22D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 40–280 N·m, 22D head mount (CL280Nx22D) 60–420 N·m, 22D head mount (CL420Nx22D) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 655 Torque Range 40–280 N·m Graduation 2 N·m Head Mount Size 22D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 10–200 N·m 12D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 10–50 N·m, 12D head mount (CL50Nx12D) 10–50 N·m, 15D head mount (CL50Nx15D) 20–100 N·m, 15D head mount (CL100Nx15D) 30–140 N·m, 15D head mount (CL140Nx15D) 40–200 N·m, 19D head mount (CL200Nx19D) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 230 Torque Range 10–50 N·m Graduation 0.5 N·m Head Mount Size 12D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 10–120 kgf·m 27D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 10–55 kgf·m (539 N·m max), 27D head mount (5500CLE2) 15–75 kgf·m (735 N·m max), 27D head mount (7500CLE2) 20–85 kgf·m (834 N·m max), 32D head mount (8500CLE2) 30–120 kgf·m (1.18e+03 N·m max), 32D head mount (12000CLE2) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 1/148 Torque Range 10–55 kgf·m (539 N·m max) Graduation 0.5 kgf·m Head Mount Size 27D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 4–42 kgf·m 22D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 4–28 kgf·m (275 N·m max), 22D head mount (2800CL3) 6–42 kgf·m (412 N·m max), 22D head mount (4200CL2) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 655 Torque Range 4–28 kgf·m (275 N·m max) Graduation 0.2 kgf·m Head Mount Size 22D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI CL Interchangeable Head Adjustable Click Torque Wrench 100–2000 kgf·cm 12D HeadAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 100–500 kgf·cm (49 N·m max), 12D head mount (450CL3) 100–500 kgf·cm (49 N·m max), 15D head mount (500CL3) 200–1000 kgf·cm (98.1 N·m max), 15D head mount (900CL3) 300–1400 kgf·cm (137 N·m max), 15D head mount (1400CL3) 400–2000 kgf·cm (196 N·m max), 19D head mount (1800CL3) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 230 Torque Range 100–500 kgf·cm (49 N·m max) Graduation 5 kgf·cm Head Mount Size 12D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Preset wrench — specify your torque value when ordering. This model has no adjustment scale: it is set to one value at the factory and cannot be changed afterwards. Tell us the required torque (and the unit) with your order. Because each unit is set to order it cannot be returned once calibrated.TOHNICHI CSP Interchangeable Head Preset Torque Wrench 4–42 kgf·m 22D HeadA preset torque wrench is locked to one value at the factory and has no scale to adjust, which is what makes it right for a repeated production joint — the operator cannot change the setting, and the click is the only feedback needed.Available Sizes 4–28 kgf·m (275 N·m max), 22D head mount (CSP280N3x22D) 6–42 kgf·m (412 N·m max), 22D head mount (CSP420N3x22D) Key Features Set to one torque value; the setting is not user-adjustable Removes operator error on repetitive assembly work State the required torque value when ordering Specifications Overall Length (mm) 625 Torque Range 4–28 kgf·m (275 N·m max) Head Mount Size 22D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Preset wrench — specify your torque value when ordering. This model has no adjustment scale: it is set to one value at the factory and cannot be changed afterwards. Tell us the required torque (and the unit) with your order. Because each unit is set to order it cannot be returned once calibrated.TOHNICHI CSP Interchangeable Head Preset Torque Wrench 0.4–200 N·m 15D HeadA preset torque wrench is locked to one value at the factory and has no scale to adjust, which is what makes it right for a repeated production joint — the operator cannot change the setting, and the click is the only feedback needed.Available Sizes 30–140 N·m, 15D head mount (CSP140N3x15D) 1–6 N·m, 8D head mount (CSP6N4x8D) 2–12 N·m, 8D head mount (CSP12N4x8D) 5–25 N·m, 10D head mount (CSP25N3x10D) 10–50 N·m, 12D head mount (CSP50N3x12D) 20–100 N·m, 15D head mount (CSP100N3x15D) 40–200 N·m, 19D head mount (CSP200N3x19D) 10–50 N·m, 15D head mount (CSP50N3x15D) 0.4–2 N·m, 6D head mount (CSP2NX6D) 1–5 N·m, 6D head mount (CSP5NX6D) Key Features Set to one torque value; the setting is not user-adjustable Removes operator error on repetitive assembly work State the required torque value when ordering Specifications Overall Length (mm) 350 Torque Range 30–140 N·m Head Mount Size 15D Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Preset wrench — specify your torque value when ordering. This model has no adjustment scale: it is set to one value at the factory and cannot be changed afterwards. Tell us the required torque (and the unit) with your order. Because each unit is set to order it cannot be returned once calibrated.TOHNICHI QSP Ratchet Head Preset Torque Wrench 40–420 N·m 3/4" driveA preset torque wrench is locked to one value at the factory and has no scale to adjust, which is what makes it right for a repeated production joint — the operator cannot change the setting, and the click is the only feedback needed.Available Sizes 40–280 N·m, 3/4" drive (QSP280N3) 60–420 N·m, 3/4" drive (QSP420N) Key Features Set to one torque value; the setting is not user-adjustable Removes operator error on repetitive assembly work State the required torque value when ordering Specifications Overall Length (mm) 665 Torque Range 40–280 N·m Square Drive 3/4" drive Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Preset wrench — specify your torque value when ordering. This model has no adjustment scale: it is set to one value at the factory and cannot be changed afterwards. Tell us the required torque (and the unit) with your order. Because each unit is set to order it cannot be returned once calibrated.TOHNICHI QSP Ratchet Head Preset Torque Wrench 0.6–200 N·m 1/4" driveA preset torque wrench is locked to one value at the factory and has no scale to adjust, which is what makes it right for a repeated production joint — the operator cannot change the setting, and the click is the only feedback needed.Available Sizes 1–6 N·m, 1/4" drive (QSP6N4) 2–12 N·m, 1/4" drive (QSP12N4) 5–25 N·m, 3/8" drive (QSP25N3) 10–50 N·m, 3/8" drive (QSP50N3) 20–100 N·m, 1/2" drive (QSP100N4) 30–140 N·m, 1/2" drive (QSP140N3) 40–200 N·m, 1/2" drive (QSP200N4) 0.6–3 N·m, 6.35 mm drive (QSP3N4) Key Features Set to one torque value; the setting is not user-adjustable Removes operator error on repetitive assembly work State the required torque value when ordering Specifications Overall Length (mm) 165 Torque Range 1–6 N·m Square Drive 1/4" drive Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Made to order — please enquire before ordering. This model is built to the specification given at order time. Message us with what you need and we will confirm the configuration and lead time.TOHNICHI QLLS Adjustable Torque Wrench with Limit Switch 40–420 N·m 3/4" driveA limit-switch wrench closes an electrical contact at the set torque, so an assembly line counter can confirm that every fastener was actually tightened.Available Sizes 40–280 N·m, 3/4" drive (QLLS280N) 60–420 N·m, 3/4" drive (QLLS420N) Key Features Signal output at the set torque for counters and error-proofing systems Used where a missed fastener has to be detected, not just avoided Requires a matching counter unit and cable Specifications Overall Length (mm) 695 Torque Range 40–280 N·m Square Drive 3/4" drive Graduation 2 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Made to order — please enquire before ordering. This model is built to the specification given at order time. Message us with what you need and we will confirm the configuration and lead time.TOHNICHI QLLS Adjustable Torque Wrench with Limit Switch 3–200 N·m 3/8" driveA limit-switch wrench closes an electrical contact at the set torque, so an assembly line counter can confirm that every fastener was actually tightened.Available Sizes 10–50 N·m, 3/8" drive (QLLS50N) 20–100 N·m, 1/2" drive (QLLS100N4) 30–140 N·m, 1/2" drive (QLLS140N) 40–200 N·m, 1/2" drive (QLLS200N4) 3–15 N·m, 1/4" drive (QLMS15N) 5–25 N·m, 3/8" drive (QLLS25N5) Key Features Signal output at the set torque for counters and error-proofing systems Used where a missed fastener has to be detected, not just avoided Requires a matching counter unit and cable Specifications Overall Length (mm) 260 Torque Range 10–50 N·m Square Drive 3/8" drive Graduation 0.5 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Made to order — please enquire before ordering. This model is built to the specification given at order time. Message us with what you need and we will confirm the configuration and lead time.TOHNICHI QLLS Adjustable Torque Wrench with Limit Switch 4–42 kgf·m 3/4" driveA limit-switch wrench closes an electrical contact at the set torque, so an assembly line counter can confirm that every fastener was actually tightened.Available Sizes 4–28 kgf·m (275 N·m max), 3/4" drive (2800QL3LS) 6–42 kgf·m (412 N·m max), 3/4" drive (4200QL2LS) Key Features Signal output at the set torque for counters and error-proofing systems Used where a missed fastener has to be detected, not just avoided Requires a matching counter unit and cable Specifications Overall Length (mm) 695 Torque Range 4–28 kgf·m (275 N·m max) Square Drive 3/4" drive Graduation 0.2 kgf·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Made to order — please enquire before ordering. This model is built to the specification given at order time. Message us with what you need and we will confirm the configuration and lead time.TOHNICHI QLLS Adjustable Torque Wrench with Limit Switch 30–2000 kgf·cm 1/2" driveA limit-switch wrench closes an electrical contact at the set torque, so an assembly line counter can confirm that every fastener was actually tightened.Available Sizes 200–1000 kgf·cm (98.1 N·m max), 1/2" drive (900QL4LS) 300–1400 kgf·cm (137 N·m max), 1/2" drive (1400QL3LS) 400–2000 kgf·cm (196 N·m max), 1/2" drive (1800QL4LS) 100–500 kgf·cm (49 N·m max), 3/8" drive (450QL3LS) 30–150 kgf·cm (14.7 N·m max), 1/4" drive (150QLMS-MH) 30–150 kgf·cm (14.7 N·m max), 1/4" drive (150QLMS) 50–250 kgf·cm (24.5 N·m max), 3/8" drive (225QL5LS) Key Features Signal output at the set torque for counters and error-proofing systems Used where a missed fastener has to be detected, not just avoided Requires a matching counter unit and cable Specifications Overall Length (mm) 335 Torque Range 200–1000 kgf·cm (98.1 N·m max) Square Drive 1/2" drive Graduation 10 kgf·cm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 40–280 N·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 695 Torque Range 40–280 N·m Square Drive 3/4" drive Graduation 2 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 0.4–200 N·m 3/8" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 10–50 N·m, 3/8" drive (QL50N-MH) 40–200 N·m, 1/2" drive (QL200N4-MH) 5–25 N·m, 3/8" drive (QL25N-MH) 20–100 N·m, 1/2" drive (QL100N4-MH) 30–140 N·m, 1/2" drive (QL140N-MH) 0.4–2 N·m, 1/4" drive (QL2N-MH) 1–5 N·m, 1/4" drive (QL5N-MH) 2–10 N·m, 1/4" drive (QL10N-MH) 3–15 N·m, 1/4" drive (QL15N-MH) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 260 Torque Range 10–50 N·m Square Drive 3/8" drive Graduation 0.5 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 4–28 kgf·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 695 Torque Range 4–28 kgf·m (275 N·m max) Square Drive 3/4" drive Graduation 0.2 kgf·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 4–2000 kgf·cm 3/8" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 50–250 kgf·cm (24.5 N·m max), 3/8" drive (225QL-MH) 100–500 kgf·cm (49 N·m max), 3/8" drive (450QL-MH) 200–1000 kgf·cm (98.1 N·m max), 1/2" drive (900QL4-MH) 300–1400 kgf·cm (137 N·m max), 1/2" drive (1400QL-MH) 400–2000 kgf·cm (196 N·m max), 1/2" drive (1800QL4-MH) 4–20 kgf·cm (1.96 N·m max), 1/4" drive (20QL-MH) 10–50 kgf·cm (4.9 N·m max), 1/4" drive (50QL-MH) 20–100 kgf·cm (9.81 N·m max), 1/4" drive (100QL-MH) 30–150 kgf·cm (14.7 N·m max), 1/4" drive (150QL-MH) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 230 Torque Range 50–250 kgf·cm (24.5 N·m max) Square Drive 3/8" drive Graduation 2.5 kgf·cm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 100–2800 N·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 150–750 N·m, 3/4" drive (QLE750N2) 100–550 N·m, 3/4" drive (QLE550N2) 200–1000 N·m, 25.4 mm drive (QLE1000N2) 300–1400 N·m, 25.4 mm drive (QLE1400N2) 500–2100 N·m, 25.4 mm drive (QLE2100N2) 800–2800 N·m, 1-1/2" drive (QLE2800N2) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 1/342 Torque Range 150–750 N·m Square Drive 3/4" drive Graduation 5 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 40–420 N·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 40–280 N·m, 3/4" drive (QL280N) 60–420 N·m, 3/4" drive (QL420N) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 695 Torque Range 40–280 N·m Square Drive 3/4" drive Graduation 2 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 10–200 N·m 3/8" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 10–50 N·m, 3/8" drive (QL50N) 40–200 N·m, 1/2" drive (QL200N4) 20–100 N·m, 1/2" drive (QL100N4) 30–140 N·m, 1/2" drive (QL140N) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 260 Torque Range 10–50 N·m Square Drive 3/8" drive Graduation 0.5 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 10–280 kgf·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 15–75 kgf·m (735 N·m max), 3/4" drive (7500QLE2) 50–210 kgf·m (2.06e+03 N·m max), 25.4 mm drive (21000QLE2) 10–55 kgf·m (539 N·m max), 3/4" drive (5500QLE2) 20–100 kgf·m (981 N·m max), 25.4 mm drive (10000QLE2) 30–140 kgf·m (1.37e+03 N·m max), 25.4 mm drive (14000QLE2) 80–280 kgf·m (2.75e+03 N·m max), 1-1/2" drive (28000QLE2) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 1/342 Torque Range 15–75 kgf·m (735 N·m max) Square Drive 3/4" drive Graduation 0.5 kgf·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 4–42 kgf·m 3/4" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 6–42 kgf·m (412 N·m max), 3/4" drive (4200QL2) 4–28 kgf·m (275 N·m max), 3/4" drive (2800QL3) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 995 Torque Range 6–42 kgf·m (412 N·m max) Square Drive 3/4" drive Graduation 0.2 kgf·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

TOHNICHI QL Ratchet Head Adjustable Click Torque Wrench 100–2000 kgf·cm 1/2" driveAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 400–2000 kgf·cm (196 N·m max), 1/2" drive (1800QL4) 200–1000 kgf·cm (98.1 N·m max), 1/2" drive (900QL4) 300–1400 kgf·cm (137 N·m max), 1/2" drive (1400QL3) 100–500 kgf·cm (49 N·m max), 3/8" drive (450QL3) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 490 Torque Range 400–2000 kgf·cm (196 N·m max) Square Drive 1/2" drive Graduation 20 kgf·cm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About TOHNICHIFounded in Japan in 1949, Tohnichi Manufacturing Co., Ltd. builds nothing but torque tools — manual and powered torque devices, mechanical and electronic torque measuring equipment, and the software that records what they read. Its interchangeable-head system lets one calibrated wrench body cover open-end, ring, hex and hook work.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench Set 1–25 N·m 1/4" driveTorque Wrench Set 1–25 N·m 1/4" drive supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 5–25 N·m, 1/4" drive (TW-525 SET) 1–6 N·m, 1/4" drive (TW-106 SET) Specifications Overall Length (mm) 205 Torque Range 5–25 N·m Square Drive 1/4" drive Graduation 0.2 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench 1/4" drive TW-250Torque Wrench 1/4" drive TW-250 supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 53.1–212.4 lbf·in (24 N·m max), 1/4" drive (TW-250F) 18.5–77.5 N·m, 3/8" drive (TW-1100F) 33.2–151.2 N·m, 1/2" drive (TW-2100F) 48–247.2 N·m, 1/2" drive (TW-3500F) Specifications Overall Length (mm) 281 Torque Range 53.1–212.4 lbf·in (24 N·m max) Square Drive 1/4" drive Graduation 0.2 lbf·in Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC QL Type Adjustable Click Torque WrenchAn adjustable click wrench is set by turning the grip to the value on the scale; at that value the head breaks over with an audible click and the operator stops. It is the general-purpose torque wrench for maintenance and assembly.Available Sizes 100–500 kgf·cm (49 N·m max), 3/8" drive (TW-500QL) 200–1000 kgf·cm (98.1 N·m max), 1/2" drive (TW-1000QL) 400–2000 kgf·cm (196 N·m max), 1/2" drive (TW-2000QL) 10–50 kgf·cm (4.9 N·m max), 1/4" drive (TW-50QL) 20–100 kgf·cm (9.81 N·m max), 1/4" drive (TW-100QL) 30–150 kgf·cm (14.7 N·m max), 1/4" drive (TW-150QL) 50–250 kgf·cm (24.5 N·m max), 3/8" drive (TW-250QL) 300–1400 kgf·cm (137 N·m max), 1/2" drive (TW-1400QL) Key Features Scale on the grip, locked with a collar so it cannot drift Clicks and releases at the set value — no over-torque from following through Return the setting to the low end of the range for storage Specifications Overall Length (mm) 260 Torque Range 100–500 kgf·cm (49 N·m max) Square Drive 3/8" drive Graduation 5 kgf·cm Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Window Scale Torque WrenchWindow Scale Torque Wrench supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 100–500 N·m, 3/4" drive (TW-500W) 100–800 N·m, 3/4" drive (TW-800W) 200–1000 N·m, 3/4" drive (TW-1000W) 20–100 N·m, 3/8" drive (TW-100W) 40–200 N·m, 1/2" drive (TW-200W) 60–320 N·m, 1/2" drive (TW-320W) 6–30 N·m, 1/4" drive (TW-30W) 10–60 N·m, 3/8" drive (TW-60W) Specifications Overall Length (mm) 665 Torque Range 100–500 N·m Square Drive 3/4" drive Graduation 4 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench SetTorque Wrench Set supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 200–1000 kgf·cm (98.1 N·m max) (TW-1000 SET) 44.1–191.2 N·m (TW-2000 SET) 8.1–40.8 kgf·m (400 N·m max) (TW-4000 SET) Specifications Torque Range 200–1000 kgf·cm (98.1 N·m max) Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench 20–100 N·m 3/8" driveTorque Wrench 20–100 N·m 3/8" drive supplied by BLUETEC, sourced through official Korean distribution.Specifications Overall Length (mm) 464 Torque Range 20–100 N·m Square Drive 3/8" drive Graduation 0.5 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench 4.4–191.2 N·m 9x12 HeadTorque Wrench 4.4–191.2 N·m 9x12 Head supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 4.4–19.1 N·m, 9x12 head mount (TCL-200) 22.1–95.6 N·m, 14x18 head mount (TCL-1000) 44.1–191.2 N·m, 14x18 head mount (TCL-2000) Specifications Overall Length (mm) 313 Torque Range 4.4–19.1 N·m Head Mount Size 9x12 Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench 123–564 N·m 3/4" driveTorque Wrench 123–564 N·m 3/4" drive supplied by BLUETEC, sourced through official Korean distribution.Specifications Overall Length (mm) 1/050 Torque Range 123–564 N·m Square Drive 3/4" drive Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench 44.1–323.6 N·m 1/2" driveTorque Wrench 44.1–323.6 N·m 1/2" drive supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 44.1–191.2 N·m, 1/2" drive (TW-2000) 68.6–323.6 N·m, 1/2" drive (TW-3400) Specifications Overall Length (mm) 510 Torque Range 44.1–191.2 N·m Square Drive 1/2" drive Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench 2.5–95.6 N·m 1/4" driveTorque Wrench 2.5–95.6 N·m 1/4" drive supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 2.5–9.3 N·m, 1/4" drive (TW-100) 4.4–19.1 N·m, 3/8" drive (TW-200) 12.3–56.4 N·m, 3/8" drive (TW-600) 22.1–95.6 N·m, 3/8" drive (TW-1000) Specifications Overall Length (mm) 232 Torque Range 2.5–9.3 N·m Square Drive 1/4" drive Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench Set 5–209.7 N·mTorque Wrench Set 5–209.7 N·m supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 19.6–109.7 N·m (T-80 SET) 42.1–209.7 N·m (T-150 SET) 5–25 N·m (T-60SET) Specifications Torque Range 19.6–109.7 N·m Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

BLUETEC Torque Wrench 1/4" driveTorque Wrench 1/4" drive supplied by BLUETEC, sourced through official Korean distribution.Available Sizes 5–25 N·m, 1/4" drive (T-60) 20–110 N·m, 3/8" drive (T-80) 42–210 N·m, 1/2" drive (T-150) 70–350 N·m, 1/2" drive (T-250) 48–331.9 lbf·ft (450 N·m max), 3/4" drive (T-300) 103.3–516.3 lbf·ft (700 N·m max), 3/4" drive (T-500) 103.3–722.5 lbf·ft (980 N·m max), 25.4 mm drive (T-700) Specifications Overall Length (mm) 283 Torque Range 5–25 N·m Square Drive 1/4" drive Specifications shown are for the base model; values vary by size. Contact us if you need the figures for a specific size.About BLUETECBluetec is a Korean manufacturer of solid carbide end mills and of BD-series precision measuring instruments — calipers, micrometers, indicators and height gauges.Ordering & Shipping Genuine product sourced through official Korean distribution Ships worldwide from South Korea by FedEx International Priority Express Import duties and taxes are payable by the recipient Bulk and trade pricing available on request

Read more less

Wiha Torque screwdriver set TorqueVario®-S   assorted variably adjustable, 13-pcs. in box ,2852 S10  Torque screwdriver set TorqueVario®-S assorted variably adjustable, 13-pcs. in boxThe right torque for any application. Product highlights My your your requirements Increases your efficiency Simplifies your work A variably settable torque which covers a large range of usage. The correct torque to avoid damaging material and no follow-up work is necessary. All tools are securely arranged in a robust and clearly laid out bag Protects your health Lowers your costs With the patented SoftFinish® handle design, ensuring work is done on hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. The correct torque protects you from warranty claims.     Further information Description The TorqueVario®-S torque screwdriver provides the right torque for process safety. The tool set includes an ergonomically shaped torque screwdriver with an integrated numeric scale, 10 standard bits for all applications, a bit holder and an adjusting tool. All components are arranged practically in a high-grade, sturdy box, where they are easy to identify. The torque screwdriver covers a wide range of applications with a torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal generated when the torque is produced guarantees that the process is safe to torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/- 6%, the torque tool complies with EN ISO 6789 requirements Application Suitable for controlled fastening of predefined torques for tasks such as industrial assembly work or fastening of cutting inserts. Standards DIN EN ISO 6789.   Set constituent 1x Torque screwdriver TorqueVario®-S (26463) , Nm: 0,8-5,0 , Tolerance: 6%  1x Bit holder clamping with ball (27526) , Hex: 1/4 , Hex blade diameter: 4  1x Adjusting tool (26864) , Screwdriver length: 146 , Visible blade length: 90  1x Bit Standard 25 mm (01657) , Phillips: PH1 , Bit length: 25  1x Bit Standard 25 mm (01658) , Phillips: PH2 , Bit length: 25  1x Bit Standard 25 mm (01688) , Pozidriv: PZ1 , Bit length: 25  1x Bit Standard 25 mm (01689) , Pozidriv: PZ2 , Bit length: 25  1x Bit Standard 25 mm (01716) , TORX®: T10 , Bit length: 25  1x Bit Standard 25 mm (01717) , TORX®: T15 , Bit length: 25  1x Bit Standard 25 mm (01718) , TORX®: T20 , Bit length: 25  1x Bit Standard 25 mm (01719) , TORX®: T25 , Bit length: 25  1x Bit Standard 25 mm (01705) , Hexagon socket: 3,0 , Bit length: 25  1x Bit Standard 25 mm (01706) , Hexagon socket: 4,0 , Bit length: 25 

Read more less