Products

11783 products


  • 3.peaks Angle-Cutting Nippers DNP

    3.Peaks 3.peaks Angle-Cutting Nippers DNP-125 GH

    Electric / wiring work with this one.  From peeling to splitting, various electric wiring work is done with one piece.  Blade angle 37 °. Put a blade in an oblique direction and cut intricate and deep place.◦ There is a model number with cutting blades for peeling (※ "H" listed in part number) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0525 DNP-125 GH 125 ■  - 105 2.0 217-0534 DNP-150GH 150 ■  - 155 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

  • 3.peaks Angle-Cutting Nippers DNP

    3.Peaks 3.peaks Angle-Cutting Nippers DNP-150GH

    Electric / wiring work with this one.  From peeling to splitting, various electric wiring work is done with one piece.  Blade angle 37 °. Put a blade in an oblique direction and cut intricate and deep place.◦ There is a model number with cutting blades for peeling (※ "H" listed in part number) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0525 DNP-125 GH 125 ■  - 105 2.0 217-0534 DNP-150GH 150 ■  - 155 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

  • 3.peaks Angle-Plastic Nippers AP

    3.Peaks 3.peaks Angle-Plastic Nippers AP

    Blade angle 37 °. The blade enters from an oblique direction.  Blade angle 37 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With a stopper for preventing stiffness ◦ With too much prevention pin included material Vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0561 AP-125 G-S 125 ■  ◎  105 217-0570 AP-150 G-S 150 ■  ◎  155 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • 3.PEAKS Bent Heavy Duty-Diagonal Cutting Nippers NP-190BZ

    3.Peaks 3.PEAKS Bent Heavy Duty-Diagonal Cutting Nippers NP-190BZ

    Nippa series The strongest cutting force. Piano wire Φ 2.0 mm possible.  Use the same highest grade steel as power Nippa. Improved blade angle and finish, improved cutting force and durability.◦ Apply the lever principle, strongly cut piano wire · hard steel wire◦ New type of angle is an angle.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability material SK 85 (SK 5) Hardness (HRC) 62 ~ 67 (blade part) Blade angle 15°  Product Code Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire Piano Wire 217-0808 NP-190BZ 190 ●  - 270 2.6 3.2 2.0 ※ Grip: ● = Elastomer ■ = Vinyl ▲ = Plastic

  • 3.peaks Bent Long-Nose Pliers (RP-150BG)

    3.Peaks 3.peaks Bent Long-Nose Pliers (RP-150BG)

    Tip angle 45 °. Function to cut · With a type with a type.  It is what the bent form of a standard shape radio pliers.◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 45 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Copper Wire 217-1490 RP-150 BG 150 ■  - 135 1.5 2.6 ※ Grip: ■ = Vinyl

  • 3.peaks Bent Needle-Nose Pliers NNP-150BG

    3.Peaks 3.peaks Bent Needle-Nose Pliers NNP-150BG

    Type angle 60 °. No tip nicks.  It is recommended that you do not want to scratch because there is no notch at the tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 60 ° Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1524 NNP-150BG 150 ■  - 120 ※ Grip: ■ = Vinyl

  • 3.PEAKS Bent-Cutting Nippers SP-32

    3.Peaks 3.PEAKS Bent-Cutting Nippers SP-32

    Blade angle 60 °. You can reverse hand.  Because the blade has a large angle, it is suitable for cutting narrow spots.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 60 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0163 SP-32 130 ●  □  45 1.0 ※ grip: ● = elastomer □ = plastic spring

  • 3.PEAKS Bent-Cutting Nippers SP-42

    3.Peaks 3.PEAKS Bent-Cutting Nippers SP-42

    Blade angle 60 °. You can reverse hand.  Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 60 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic Copper Wire Wire 217-0756 SP-42 150 ●  □  68 4.0 1.6 1.0 ※ grip: ● = elastomer □ = plastic spring

  • 3.peaks Bent-Needle Nose Pliers NNP-130B

    3.Peaks 3.peaks Bent-Needle Nose Pliers NNP-130B

    Type angle 45 °. Pick up / pinch / line up  Like a tweezers, I grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-04: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ NNP-B: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 45 ° Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0491 NNP-130B 130 ■  ◎  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • 3.peaks Bent-Needle Nose Pliers SM-04

    3.Peaks 3.peaks Bent-Needle Nose Pliers SM-04

    Type angle 45 °. Pick up / pinch / line up  Like a tweezers, I grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-04: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 45 ° Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0428 SM-04 130 ●  □  60 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • 3.peaks Cable Cutters KC

    3.Peaks 3.peaks Cable Cutters KC

    Cable (IV) wire 60 mm² can be cut.  With a sharp blade, cut the cable wire. It's a beautiful cut.  Only for copper wire cutting.◦ Vinyl grip with easy-to-purchase price material S58C Hardness (HRC) 50 ~ 55 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) IV㎟ Copper Wire 217-1375 KC-22 160 ■  - 170 22.0 9.2 217-1384 KC-60 235 ■  - 365 60 (¢13.6) 13.6 ※ Grip: ■ = Vinyl

  • 3.PEAKS Cutting Nippers SP-31

    3.Peaks 3.PEAKS Cutting Nippers SP-31

    With "lead stopper" attached to prevent scattering of cut ends.  Due to the lead stopper, the cut wire will not scatter. It is safe to work because there is no need to drop the cut end to the floor and surroundings.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 20 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0154 SP-31 130 ●  □  45 1.6 ※ grip: ● = elastomer □ = plastic spring

  • [3.PEAKS] Cutting Nippers SP-41 | 217-0747

    3.Peaks 3.PEAKS Cutting Nippers SP-41

    To wire rod and plastic cutting.  Long type is too big, mini type is delicate. Recommended for those who are interested in balanced lightness and strength.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Grip release prevention pin included◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic Copper Wire Wire 217-0747 SP-41 150 ●  □  68 4.0 2.0 1.2 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Daiya-Type Pliers (DS-115/DS-150)

    3.Peaks 3.peaks Daiya-Type Pliers (DS-115/DS-150)

    Small design with minimum 115 mm weight 65 g. Corresponds to precision screws and truss screws, narrow spaces.  In order to hold the truss screw firmly, we changed the vertical groove structure of the conventional product "Diamond Screw Thread Pliers (DS-150Z)".  It is a three-point supported gripper which can accommodate various shapes and sizes.◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous spring plastic spring (* DS - 115 TZ only)ESD compliant electrostatic countermeasure grip adopted (surface resistance value 1 × 10 6 Ω to 10 9 Ω / sq.) (* DS - 115 TZ only) material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0862 DS-115TZ 115 ●  □  65 217-1232 DS-150TZ 150 ●  - 125 ※ grip: ● = elastomer □ = plastic spring

  • [3PEAKS] Daiya-Type Pliers (DS-150Z/DS-175Z)

    3.Peaks 3.peaks Daiya-Type Pliers (DS-150Z/DS-175Z)

    Lightly easy to handle screw removal tool. There are big and small.  Grasp the screw with a total of 3 gripper parts and turn it powerfully. Although there is no lock function, it can be used easily with one hand.◦ Squatting section: Our original design diamond type. Grasp screws of various shapes with three points support securely◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0464 DS-150Z 150 ●  - 125 217-0473 DS-175Z 175 ●  - 240 ※ grip: ● = elastomer

  • [3PEAKS] Daiya-Type Pliers (DS-175/DS-215)

    3.Peaks 3.peaks Daiya-Type Pliers (DS-175/DS-215)

    It turns powerfully with a large size of 215 mm. Also supports truss and nut.  Grasp the screw with a total of 3 gripper parts and turn it powerfully. Although there is no lock function, it can be used easily with one hand.◦ Squatting section: Our original design diamond type. Corresponding to truss screws by changing longitudinal grooves◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand◦ Grip hole for falling prevention strap mounting (※ DS-215TZ only) material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1241 DS-175TZ 175 ●  - 240 217-1250 DS-215TZ 215 ●  - 350 ※ grip: ● = elastomer

  • [3PEAKS] Dia-Type Vise Grip Pliers DS-130 | 217-0543

    3.Peaks 3.peaks Dia-Type Vise Grip Pliers DS-130

    After grasping the screw head, it has a lock that can be fixed.  We added screw removal function to vise pliers. Grasp the screw with the two gripper parts, fix it with the lock, turn it powerfully.  Because the gripper part opens widely, it can correspond to various screws and pipes.◦ Squatting section: Our original design diamond type. Grab surely with 3 point support◦ Lock: Grasp the handle and grasp the screw and fix it◦ Cut by blade◦ It can be used as a vice plier material Chrome molybdenum steel Hardness (HRC) 42 to 48 (gripper) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0543 DS-130 130 ▲  ○  140 ※ Grip: ▲ = Steel ○ = Spring

  • [3.PEAKS] Diagonal Cutting Nippers

    3.Peaks 3.PEAKS Diagonal Cutting Nippers

    1 review

    "Strong nipper" is one of the JIS standard categories. Despite being a standard product, we succeeded in weight saving and function improvement pursuing the shape and structure to the limit of the standard. It corresponds to various wires, promising excellent sharpness and comfort.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous spring coil spring (※ stated as "S" in product number) / without spring◦ There is a model number with a blade hole for stripping peeling (* described as "H" in part number)   material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle 15° JIS JIS B 4635 J-130 / J-160 PAT. - - Product Code. Part number Nominal size grip weight Cutting Capacity(mm) (mm) Material Spring (g) Wire Copper Wire 217-0011 NP-125 GH 125 ■ - - 90 1.5 2.6 217-0020 NP-150GH 150 ■ - - 155 1.9 3.2

  • [3PEAKS] Edge-Cutting Nippers ENP-115 | 217-0507

    3.Peaks 3.peaks Edge-Cutting Nippers ENP-115

    The blade enters from an oblique direction. Reverse hand handling possible.  Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ ENP: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 42 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0507 ENP-115 115 ■  ◎  50 1.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Edge-Cutting Nippers SM-06 | 217-0446

    3.Peaks 3.peaks Edge-Cutting Nippers SM-06

    The blade enters from an oblique direction. Reverse hand handling possible.  Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ SM-06: Easy fit to hand Elastomer resin grip / Plastic spring (durability about 10 times compared to our company) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 42 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0446 SM-06 115 ●  □  55 1.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Edge-Plastic Nippers EP

    3.Peaks 3.peaks Edge-Plastic Nippers EP

    Blade angle 42 °. The blade enters from an oblique direction.  Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 42°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-1339 EP-115 115 ■  ◎  55 1.5 217-1348 EP-115R 115 ■  ◎  55 1.5 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3.PEAKS] Electrican Power Side-Cutting Pliers

    3.Peaks 3.peaks Electrican Power Side-Cutting Pliers

    Electric installation workers can use safely.  We are aiming at a lot of people who work in the office. We have a lot of work to do. With eccentric lever, strongly disconnect VVF line.◦ VVF 3 long sized blade capable of cutting the core wire at one time◦ In the gripper part there is a diamond shape with nuts, bolts added◦ With terminal crimping function (Simple type: 1.25 ~ 5.5 m²)◦ From the main body to the steering wheel, a smooth shape without catching◦ Handle: Easy to grip and easy to grip. Elastic elastomer resin grip◦ Grip hole for falling prevention strap installation material Vanadium steel Hardness (HRC) 62 ~ 67 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire 217-1737 DP-200 200 ●  - - 245 2.8 3.5 217-1746 DP-220 220 ●  - - 320 3.4 4.0 ※ grip: ● = elastomer

  • [3PEAKS] Flat-Nose Pliers FP-150G | 217-1223

    3.Peaks 3.peaks Flat-Nose Pliers FP-150G

    Type with tip. Strongly grasp / bend  It is robust and grasps strongly with a wide tip, and it corresponds to various processes such as wires and sheet metal.  There is no cutting ability. Type with tip.◦ Vinyl grip with easy-to-purchase price material S55C Hardness (HRC) 40 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1223 FP-150G 150 ■  - 125 ※ Grip: ■ = Vinyl

  • [3PEAKS] Green End-Cutting Nippers EC-200 | 217-1180

    3.Peaks 3.peaks Green End-Cutting Nippers EC-200

    Cut from directly above. Reverse hand handling possible.  It is a green series of forged products that can be strongly reinforced with a boost structure◦ With handle lock◦ Fall prevention strap installation hole available◦ With edge adjustment screw: Corresponding spanner 7 mm material Vanadium steel Hardness (HRC) 60 ~ 65 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Copper Wire 217-1180 EC-200 200 ▲  ○  265 1.5 4.0 ※ Grip: ▲ = Steel ○ = Spring

  • [3.PEAKS] Heavy Duty Diagonal Cutting Nippers | 217-0136

    3.Peaks 3.peaks Heavy Duty Diagonal Cutting Nippers

    "Strong nipper" is one of the JIS standard categories. Despite being a standard product, we succeeded in weight saving and function improvement pursuing the shape and structure to the limit of the standard. It corresponds to various wires, promising excellent sharpness and comfort.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous spring coil spring (※ stated as "S" in product number) / without spring◦ There is a model number with a blade hole for stripping peeling (* described as "H" in part number) Product Code. Part number Nominal size weight Cutting Capacity(mm) (mm) (g) Wire Copper Wire Piano Wire 217-0136 NP-190 G 190 265 2.6 3.2 2

  • [3PEAKS] High-Plastic Nippers HP-125 | 217-0215

    3.Peaks 3.peaks High-Plastic Nippers HP-125

    Durability best in small class. High precision and beautiful cut surface.  Outstanding sharpness and high precision and beautiful cutting surfaces are the smallest plastic nippers.  We reduced the total weight to about 89% of our conventional product (PNP - 125 G - S), reducing the burden.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Elastic elastomer resin grip / handy plastic grip / plastic spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0215 HP-125 125 ●  □  70 5.0 ※ grip: ● = elastomer □ = plastic

  • [3.PEAKS] Light Diagonal-Cutting Nippers

    3.Peaks 3.peaks Light Diagonal-Cutting Nippers LN

    Industry's lightest! It is the lightness of shock.  "I want a Nippa that is light and highly durable, not fatigue for long hours work." Based on the customer's voice, I planned and developed it.  (LN - 150 S) to 86% (LN - 125 S) of the total weight of our conventional products (NP).  Hand less fatigue, reduce burden when carrying mobile waist bags.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy plastic springs for continuous work. Durability Approximately 10 times higher than our company (※ LN - 175 has no spring) material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle 15°  JIS JIS B 4635 J-180 * LN-175 only PAT.  ○  Product Code. Part number Nominal size grip weight Cutting Capacity(mm) (mm) Material Spring (g) Wire Copper Wire 217-0701 LN-125S 125 ●  □  82 1.5 2.6 217-0710 LN-150S 150 ●  □  122 1.9 3.2 217-0729 LN-175 175 ●  - 180 2.2 3.2 ※ grip: ● = elastomer □ = plastic spring

  • [3.PEAKS] Light Long-Nose Pliers

    3.Peaks 3.peaks Light Long-Nose Pliers LR

    Industry's lightest! It is the lightness of shock.  Develop from customer's voice. We succeeded in reducing the weight of our conventional product (RP) to a total weight of about 74% (LR - 150 S) to 83% (LR - 125 S).◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle - - JIS - - PAT. ○ ○ Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) wire copper wire 217-0686 LR-125S 125 ●  □  83 1.5 2.6 217-0695 LR-150S 150 ●  □  100 1.5 2.6 ※ grip: ● = elastomer □ = plastic

  • [3.PEAKS] Light Power Side-Cutting Pliers

    3.Peaks 3.peaks Light Power Side-Cutting Pliers PP

    Piano wire · hard steel wire OK! Please feel the difference between steel and finish.  In the power series, the quality of the steel is different. We used the finest steel materials, improved blade angle and finishing work, improved cutting force and durability. With eccentric lever, strongly cut piano wire · hard steel wire.◦ VVF 3 long sized blade capable of cutting the core wire at one time◦ In the gripper part there is a diamond shape with nuts, bolts added◦ From the main body to the steering wheel, a smooth shape without catching◦ Handle: Easy to grip and easy to grip. Elastic elastomer resin grip◦ Grip hole for falling prevention strap installation material SK 85 (SK 5) JIS - Hardness (HRC) 62 ~ 67 (blade part) PAT. - Blade angle - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire Piano Wire 217-1357 PP-170 170 ●  - 210 2.2 3.0 2.0 217-0312 PP-200 200 ●  - 245 2.8 3.5 2.0 217-0321 PP-220 220 ●  - 320 3.4 4.0 2.0 ※ grip: ● = elastomer

  • [3.PEAKS] Light Side-Cutting Pliers

    3.Peaks 3.peaks Light Side-Cutting Pliers LP

    Industry's lightest! It is the lightness of shock.  "I'd like pliers that are light, durable and hard to get tired of working for a long time." Planning and development based on customer's voice.  We succeeded in weight saving by about 72% (LP - 200) to 80% (LP - 150).  Hand less fatigue, reduce burden when carrying mobile waist bags.◦ Long size blade with VVF (3 core) wire cutting at once◦ Elastic elastomer resin grip which is familiar to hand material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle - - JIS - - PAT. - - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire 217-0093 LP-150 150 ●  - 165 2.2 3.0 217-0109 LP-175 175 ●  - 200 2.8 3.5 217-0118 LP-200 200 ●  - 265 3.4 4.0 ※ grip: ● = elastomer

  • [3PEAKS] Light-Plastic Nippers LPN

    3.Peaks 3.peaks Light-Plastic Nippers LPN

    Industry's lightest! It is the lightness of shock.  Develop products based on customer's voice. Compared to the total weight of our conventional products (PNP), we have succeeded in significantly reducing weight from 77% (LPN - 150 S) to 82% (LPN - 125 S).  Cutting capacity and durability are equivalent to those of conventional products.◦ Blade surface shape is flat type only◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material S58C Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0251 LPN-125S 125 ●  □  78 5.0 217-0260 LPN-150S  150 ●  □  115 5.0 ※ grip: ● = elastomer □ = plastic spring

  • [3.PEAKS] Long Stainless-Steel Cutting Nippers LS-01 | 217-0358

    3.Peaks 3.peaks Long Stainless-Steel Cutting Nippers LS-01

    To wire rod and plastic cutting.   It is the largest Nippa in the stainless steel series. Even if it is big, the weight is lighter than the forged product of the same size.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Precision screw stopper with less looseness (※ It is not an adjustment screw) material Stainless steel Hardness (HRC) 52 to 57 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0358 LS-01 165 ●  □  95 1.6 ※ grip: ● = elastomer □ = plastic spring

  • [3.PEAKS] Long-Nose Pliers

    3.Peaks 3.peaks Long-Nose Pliers

    JIS standard staple products.  Despite being a standard product, we pursued the shape and structure until the limit.  A sharp blade finished by hand.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous work with coil spring (※ stated as "S" in product number) / without spring material Chrome vanadium steel JIS JIS B 4631 * Nominal size 150 mm only Hardness (HRC) 54 ~ 62 (blade part) PAT. PAT. - - Blade angle - - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire 217-0039 RP-125G 125 ■  - - 95 1.5 2.6 217-0048 RP-150G 150 ■  - - 135 1.5 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ▲ = Plastic ◎ = Coil Spring

  • [3PEAKS] Micro Bent-Long Nose Pliers MR-150B | 217-1366

    3.Peaks 3.peaks Micro Bent-Long Nose Pliers (MR-150B) | 217-1366

    Tip angle 45 °. To the precise work of the deep part.  I bent the tip of the micro-needle pliers to 45 °. With an exquisite weight balance and high precision finished tip, you will surely perform delicate work such as pinching / picking up / sorting.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 45 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Copper Wire 217-1366 MR-150B 150 ■  ◎  85 1.2 2.6 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Micro Long-Nose Pliers MR

    3.Peaks 3.peaks Micro Long-Nose Pliers

    Thin and long tip shape. It is a preeminent grasp feeling.  With exquisite weight balance and high precision tip, grasp fine wire and parts securely.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0668 MR-120 120 ■  ◎  60 2.6 217-0677 MR-150 150 ■  ◎  85 2.6 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Micro Nippers MP-125GS | 217-0589

    3.Peaks 3.peaks Micro Nippers MP-125GS | 217-0589

    Small head and blade angle 22 ° makes it easy to enter a narrow place.  Nippa series only blade angle 22 °. It has a total length of 125 mm, and it corresponds to a detailed and intricate work.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 22 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Copper Wire 217-0589 MP-125 G-S 125 ■  ◎  65 2.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Micro-Plastic Nippers MPN-125 | 217-1320

    3.Peaks 3.peaks Micro-Plastic Nippers MPN-125 | 217-1320

    A blade angle of 22 ° makes it easy to enter a narrow place.  Series only blade angle 22 °. It has a total length of 125 mm, and it corresponds to a detailed and intricate work.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Easy-to-purchase vinyl grip / Continuous work is easier coil spring (※ Please inquire for spring exchange)◦ Stainless steel stopper (back of blade) / with opening preventing pin material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 22°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-1320 MPN-125 125 ■  ◎  65 3.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Mini Flat-Nose Pliers SM-07 | 217-0455

    3.Peaks 3.peaks Mini Flat-Nose Pliers SM-07 | 217-0455

    Grasp / collapse / bend / drag  Tightly grasp the wide tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-07: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0455 SM-07 115 ●  □  65 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3.PEAKS] Mini-Micro Nippers MMP-100 | 217-0181

    3.Peaks 3.peaks Mini-Micro Nippers MMP-100

      Nipper series minimum class.  With sharp sharpness, it demonstrates its power in delicate work.◦ MMP: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18 °   Product Code Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Copper Wire 217-0181 MMP-100 100 ■  ◎  50 1.6 Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3.PEAKS] Mini-Micro Nippers SM-01 | 217-0172

    3.Peaks 3.peaks Mini-Micro Nippers SM-01

    Nipper series minimum class.  With sharp sharpness, it demonstrates its power in delicate work.◦ SM-01: Easy fit to hand Elastomer resin grip / Plastic spring (durability about 10 times compared to our company) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18 ° Product Code Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Copper Wire 217-0172 SM-01 100 ●  □  55 1.6 Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3.PEAKS] Mini-Plastic Nippers MPN-100 | 217-1311

    3.Peaks 3.peaks Mini-Plastic Nippers MPN-100

    Plastic nipper series The smallest class.  With sharp sharpness, it demonstrates its power in delicate work.◦ Blade surface shape is flat type only◦ SM-02: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ MPN: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Wire Plastic 217-1311 MPN-100 100 ■  ◎  50 1.0 3.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Mini-Plastic Nippers SM-02 | 217-0190

    3.Peaks 3.peaks Mini-Plastic Nippers SM-02 | 217-0190

    Plastic nipper series The smallest class.  With sharp sharpness, it demonstrates its power in delicate work.◦ Blade surface shape is flat type only◦ SM-02: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ MPN: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade  Blade angle 18 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm)  Material Spring (g) Plastic 217-0190 SM-02 100 ●  □  55 3.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Mini-Top Cutters MTC

    3.Peaks 3.peaks Mini-Top Cutters MTC

    Small top cutter.  A blade enters directly directly above. You can cut deep places.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire spring exchange) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) Blade Wide (mm)  Material Spring (g) Plastic mm 217-1296 MTC-3 115 ■  ◎  50 1.5 3.0 217-1302 MTC-5 115 ■  ◎  50 1.5 5.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

  • [3.PEAKS] Multiple Long-Nose Pliers BR-150G-S | 217-0394

    3.Peaks 3.peaks Multiple Long-Nose Pliers BR-150G-S

    Cut / bend / Screwdrive function / Corresponds to electric work.  It is an evolutionary form of a telephone radio pliers. It is possible to correspond to various fields in the field with just one.◦ Two kinds of flu material. Elastomer resin that is familiar to the hand / Vinyl that is easy to purchase◦ Coil spring for easy continuous operation material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire 217-0394 BR-150G-S 150 ■  ◎  130 1.5 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

  • [3PEAKS] Needle Nose Pliers NNP-150G | 217-1515

    3.Peaks 3.peaks Needle Nose Pliers NNP-150G | 217-1515

    Elongated tip shape. No tip nicks.  It is recommended that you do not want to scratch because there is no notch at the tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-1515 NNP-150G 150 ■  - 120 ※ Grip: ■ = Vinyl

  • [3PEAKS] Needle-Nose Pliers NNP-130 | 217-0482

    3.Peaks 3.peaks Needle-Nose Pliers NNP-130 | 217-0482

    Pinch / Pull / Piss  The tip is a long and long jaw section, so grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-03: Easy-to-fit elastomer resin / Plastic spring (durability about 10 times higher than our company)◦ NNP: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Replacement) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0482 NNP-130 130 ■  ◎  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3PEAKS] Needle-Nose Pliers SM-03 | 217-0419

    3.Peaks 3.peaks Needle-Nose Pliers SM-03 | 217-0419

    Pinch / Pull / Piss  The tip is a long and long jaw section, so grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-03: Easy-to-fit elastomer resin / Plastic spring (durability about 10 times higher than our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight (mm)  Material Spring (g) 217-0419 SM-03 130 ●  □  60 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

  • [3.PEAKS] New-Size Long-Nose Pliers

    3.Peaks 3.peaks New-Size Long-Nose Pliers

    A completely new nominal size. Medium size of JIS standard.  The size of the hand is each person. In order to improve the ease of use and work efficiency, we are pursuing the appropriate size of the handset. It is a new design grip that is easy to grip and easy to enter power.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) (mm) Material Spring (g) Wire Copper Wire 217-0039 RP-140Z-S 140 ●  □  105 1.5 2.6 217-0048 RP-165Z-S 165 ●  □  140 1.9 3.2 ※ grip: ● = elastomer □ = plastic

Login

Forgot your password?

Don't have an account yet?
Create account