BESSEY

Products Details   Clamping force up to 1,200 N Change from clamping to spreading by switching, not converting Handle with pump lever parallel to the rail Convenient one-handed operation, with little effort required All-round clamping – in front of, behind and at the side of the rail On carded hang pack   Reference no. Opening a (mm) Throat depth b (mm) Spreading width e min/max(mm) Spreading width f min/max (mm) Rail (mm) Weight approx. (kg) DUO16-8 160 85 75-235 9-170 20 x 5 0.66 DUO30-8 300 85 75-380 9-315 20 x 5 0.72 DUO45-8 450 85 75-535 9-470 20 x 5 0.83 DUO65-8 650 85 75-685 9-660 20 x 5 1.02

Read more less

Products Details Low weight Parallel clamping with guide rods Clamping at an angle without guide rods (max. 25°) Easy to attach, with 2 table clips supplied On carded hang pack Reference no. Opening a Jaw width Weight approx. S10-ST 100mm 90mm 0.83kg  

Read more less

Products Details   Greater reserves of power, thanks to optimized rail profile, even clamping force build-up, especially under maximum utilization of the clamping range Non-slip trigger release Sintered steel cams - particularly hard-wearing, due to low friction surface hardness Quick - up to 5 x faster than regular clamps Secure - vibration resistant Strong - clamping force up to 8,500 N   Reference no. Opening a (mm) Throat depth b (mm) Rail (mm) Weight approx. (kg) GH16 160 80 17.5 x 6.8 0.64 GH20 200 100 22 x 8.5 1.11 GH25 250 120 24.5 x 9.5 1.44 GH30 300 140 28 x 11 2.27 GH40 400 120 28 x 11 2.41 GH60 600 120 28 x 11 2.84 GH80 800 120 28 x 11 3.2 GH100 1000 120 28 x 11 3.59  

Read more less

Products Details   Clamping force up to 1,200 N Feather light yet ultra strong Sturdy fixed and sliding arms made from lightweight magnesium Quick and vibration free clamping On carded hang pack   Reference no. Opening a (mm) Throat depth b (mm) Rail (mm) Weight approx. (kg) KLI12 120 80 20 x 5 0.26 KLI16 160 80 20 x 5 0.29 KLI20 200 80 20 x 5 0.32 KLI25 250 80 20 x 5 0.35 KLI30 300 80 20 x 5 0.38 KLI40 400 80 20 x 5 0.45

Read more less

Products Details   Clamping force up to 35,000 N at tightening torque of 100 Nm Long life due to heat‐resistant pressure plate with sintered steel insert, which can be tilted up to 35° With 36 mm hexagonal bolt on the end of the spindle With wedge for fixing the sliding arm     Reference no. Opening a (mm) Throat depth b (mm) Rail (mm) Weight approx. (kg) STBS100 1000 200 50 x 25 17.3  

Read more less

Products Details   Clamping force up to 22,000 N at tightening torque of 70 Nm. Long life due to heat‐resistant pressure plate with sintered steel insert, which can be tilted up to 35°. With 19 mm hexagonal bolt on the end of the spindle.      Reference no. Opening a (mm) Throat depth b (mm) Rail (mm) Weight approx. (kg) STB30M 300 175 40 x 20 5.61 STB40M 400 175 40 x 20 6.1 STB50M 500 175 40 x 20 6.67 STB60M 600 175 40 x 20 7.23 STB125M 1250 175 40 x 20 10.77  

Read more less

Products Details   Greater reserves of power, thanks to optimized rail profile, even clamping force build-up, especially under maximum utilization of the clamping range Non-slip trigger release Sintered steel cams - particularly hard-wearing, due to low friction surface hardness Quick - up to 5 x faster than regular clamps Secure - vibration resistant Strong - clamping force up to 8,500 N  BESSEY Prod# Clamping Capacity Throat Depth Load Limit Approx. Weight Reference no. Inch Inch Pounds Pounds GSCC2.506 6 2 ½ 600 1.34 GSCC2.512 12 2 ½ 600 1.72 GSCC2.524 24 2 ½ 600 2.27 GSCC2.536 36 2 ½ 600 2.82

Read more less

Products Details   High-quality two-component plastic handle positioned around the rail, so clamp can be used in tight spaces Clamping force up to 2,000 N Easy-to-move trapezoidal thread spindle with swivelling pressure plate Quick-release shift button to quickly adjust sliding bar On carded hang-pack   Reference no. Opening a (mm) Throat depth b (mm) Rail (mm) Weight approx. (kg) GK15 150 60 25 x 12 0.61 GK30 300 60 25 x 12 0.71 GK45 450 60 25 x 12 0.82 GK60 600 60 25 x 12 0.94

Read more less

Products Details   Clamping force up to 8,500 N at tightening torque of 25 Nm. 20 % more clamping force per spindle rotation with optimised rail profile. Maximum safety due to the better linear transfer of force of the sliding arm. Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°.      Reference no. Opening a (mm) Throat depth b (mm) Rail (mm) Weight approx. (kg) SL20M 200 120 28 x 11 1.88 SL25M 250 120 28 x 11 2 SL30M 300 120 28 x 11 2.11 SL40M 400 120 28 x 11 2.34 SL60M 600 120 28 x 11 2.82  

Read more less

Products Details   Clamping force up to 2,000 N Clamping arms manufactured in toughened die cast zinc black powder coated to prevent chemical corrosion  Comes with protective cap Small and easy to handle Light weight Reference no. Opening a (mm) Throat depth b (mm) Rail (mm) Weight approx. (kg) LM10/5 100 50 15 x 5 0.26 LM15/5 150 50 15 x 5 0.27 LM15/8 150 80 20 x 5 0.51 LM20/10 200 100 25 x 6 0.9 LM20/5 200 50 15 x 5 0.31 LM20/8 200 80 20 x 5 0.55 LM25/5 250 50 15 x 5 0.35 LM25/8 250 80 20 x 5 0.6 LM30/10 300 100 25 x 6 1.02 LM30/5 300 50 15 x 5 0.37 LM30/8 300 80 20 x 5 0.64 LM40/10 400 100 25 x 6 1.1 LM50/10 500 100 25 x 6 1.24 LM60/10 600 100 25 x 6 1.3 LM80/10 800 100 25 x 6 1.58  

Read more less

Products Details   Even pressure on mitre joints Crank handle can be relocated for right and left-handed users Contains: 1 band clamp, 4 Vario corners On carded hang pack Reference no. Clamping Range (mm) Band W × D (mm) Angle Range Weight approx. (kg) BAN700 Up to 7m 25 × 1 60 ° -180 ° 0.56  

Read more less

Products Details Automatic adjustment to variously-sized workpieces Quick – clamp with a spindle Stable body For attaching with table clamp – available as an accessory WS 3 – on carded hang pack   Reference no. Opening min/max (mm) Jaw height (mm) Current passage max. (mm) Weight approx. (kg) WS3 2 x 55 30 30 1 WS6 2 x 100 36 60 2.3  

Read more less