HAND TOOL

LOBSTER Hand Riveter HR002A  · It is a hand Riveter with general configuration.• Aluminum die cast frame and drop-forged chrome-vanadium steel lever handle• Wide, self-opening spring for regriping• Automatic mandrel ejection• Comes with four nosepieces to set rivets up to 3/16 "• International designSpecifications Product Code. Model No. weight size1 Set details Use range Usage jaws 215-0734 HR002A 550g 265mm ※Cannot be used with φ4.8mm stainless steel blind rivets. φ2.4・3.2・4.0・4.8mm Small IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Clippers APK28  Lightweight clippers with a maximum cutting diameter of 12 mm (for soft material), 5 mm (for soft steel) or 3 mm (for hard steel)• The handle and clip plate are made of anodized aluminum alloy.• The grip is made of luminous material that stores fluorescent or sunlight and glows in the dark. A reflective sticker is attached to the handle.• The luminous grip is soft and gently fits the hand.Use / Application• For cutting wires, nails, fences, stainless steel strands, etc.• For disassembling scaffolding and binding materials at construction sites• For pruning, landscape gardening, etc.• For cutting soft materials (wire, copper pipe, plastic, etc.) in electrical work, disassembly work, etc.Specifications Product Code. Model No. (Product) weight size1 size2 215-0716 APK28 260g 280mm 46mm  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Cutter APC20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No.  weight size1 size2 Remark 215-0691 APC20A 160g 215mm 38mm Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 2.0 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less than   IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric / wiring work with this one.  From peeling to splitting, various electric wiring work is done with one piece.  Blade angle 37 °. Put a blade in an oblique direction and cut intricate and deep place.◦ There is a model number with cutting blades for peeling (※ "H" listed in part number) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Copper Wire 217-0525 DNP-125 GH 125 ■  - 105 2.0 217-0534 DNP-150GH 150 ■  - 155 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

Read more less

Product Code. Item No Size (mm) D (mm) T (mm) t (mm) L (mm) Weight (G) 207-3596 DR0030 30 55 20 15 197 520 207-3602 DR0032 32 55 20 15 197 520 207-3611 DR0035 35 55 20 15 197 520 207-3620 DR0036 36 66 22 16 223 940 207-3639 DR0041 41 66 22 16 223 940 207-3648 DR0046 46 80 27 18 250 1,330 207-3657 DR0050 50 80 27 18 250 1,330 207-3666 DR0054 54 90 27 19 275 1,830 207-3675 DR0055 55 90 27 19 275 1,830

Read more less

Product Code. Item No Size (mm) C1 (mm) C2 (mm) T (mm) L (mm) Weight (G) 207-3903 SW3235 32×25 72 79 14 310 810 207-3912 SW3236 32×36 72 79 14 310 800 207-3921 SW3541 35×41 79 90 16 350 1,190 207-3930 SW3641 36×41 79 90 16 350 1,110 207-3949 SW4146 41×46 90 101 18 410 1,480 207-3958 SW4150 41×50 90 101 18 410 1,480 207-3967 SW4650 46×50 101 109 19 430 1,840

Read more less

Product Code. Item No. Size (") C (mm) D (mm) T1 (mm) T2 (mm) L (mm) Weight (G) 207-1792 CPX0308 3/8 22 15.3 4.7 6.5 118 30 207-1808 CPX0716 7/16 24 17.5 5.2 7 134 40 207-1817 CPX0102 1/2 26.8 20 6.2 8 149 60 207-1826 CPX0916 9/16 30.8 22 6.2 8.5 170 100 207-1835 CPX0508 5/8 34.3 24.5 7 9 190 120 207-1844 CPX1116 11/16 37 26 7.7 10.5 215 150 207-1853 CPX0304 3/4 39.5 28.5 8.2 11.5 235 200 207-1862 CPX1316 13/16 45 31 8.5 12 265 280 207-1871 CPX0708 7/8 46 32.5 9.5 12.5 280 300 207-1880 CPX1516 15/16 49.5 35 10 13.5 310 400 207-1899 CPX0101 1 52 37.5 10.5 14.5 330 430 207-1905 CPX1716 1-1/16 58 39.5 11 16 360 530 207-1914 CPX0908 1-1/8 60 44 12 17 387 700 207-1923 CPX0504 1-1/4 66 48 12.5 19 420 830

Read more less

Cut from directly above. Reverse hand handling possible.  It is a green series of forged products that can be strongly reinforced with a boost structure◦ With handle lock◦ Fall prevention strap installation hole available◦ With edge adjustment screw: Corresponding spanner 7 mm material Vanadium steel Hardness (HRC) 60 ~ 65 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Wire Copper Wire 217-1180 EC-200 200 ▲  ○  265 1.5 4.0 ※ Grip: ▲ = Steel ○ = Spring

Read more less

After grasping the screw head, it has a lock that can be fixed.  We added screw removal function to vise pliers. Grasp the screw with the two gripper parts, fix it with the lock, turn it powerfully.  Because the gripper part opens widely, it can correspond to various screws and pipes.◦ Squatting section: Our original design diamond type. Grab surely with 3 point support◦ Lock: Grasp the handle and grasp the screw and fix it◦ Cut by blade◦ It can be used as a vice plier material Chrome molybdenum steel Hardness (HRC) 42 to 48 (gripper) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0543 DS-130 130 ▲  ○  140 ※ Grip: ▲ = Steel ○ = Spring

Read more less

Lightly easy to handle screw removal tool. There are big and small.  Grasp the screw with a total of 3 gripper parts and turn it powerfully. Although there is no lock function, it can be used easily with one hand.◦ Squatting section: Our original design diamond type. Grasp screws of various shapes with three points support securely◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0464 DS-150Z 150 ●  - 125 217-0473 DS-175Z 175 ●  - 240 ※ grip: ● = elastomer

Read more less

It turns powerfully with a large size of 215 mm. Also supports truss and nut.  Grasp the screw with a total of 3 gripper parts and turn it powerfully. Although there is no lock function, it can be used easily with one hand.◦ Squatting section: Our original design diamond type. Corresponding to truss screws by changing longitudinal grooves◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand◦ Grip hole for falling prevention strap mounting (※ DS-215TZ only) material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-1241 DS-175TZ 175 ●  - 240 217-1250 DS-215TZ 215 ●  - 350 ※ grip: ● = elastomer

Read more less

Small design with minimum 115 mm weight 65 g. Corresponds to precision screws and truss screws, narrow spaces.  In order to hold the truss screw firmly, we changed the vertical groove structure of the conventional product "Diamond Screw Thread Pliers (DS-150Z)".  It is a three-point supported gripper which can accommodate various shapes and sizes.◦ In the induction hardening, the tip was hardened◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous spring plastic spring (* DS - 115 TZ only)ESD compliant electrostatic countermeasure grip adopted (surface resistance value 1 × 10 6 Ω to 10 9 Ω / sq.) (* DS - 115 TZ only) material S58C Hardness (HRC) 50 to 58 (gripper) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0862 DS-115TZ 115 ●  □  65 217-1232 DS-150TZ 150 ●  - 125 ※ grip: ● = elastomer □ = plastic spring

Read more less

Tip angle 45 °. To the precise work of the deep part.  I bent the tip of the micro-needle pliers to 45 °. With an exquisite weight balance and high precision finished tip, you will surely perform delicate work such as pinching / picking up / sorting.◦ Vinyl grip with easy-to-purchase price◦ Continuous work is easy coil spring (※ Please inquire for spring exchange)◦ With too much prevention pin included material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Blade angle 45 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Wire Copper Wire 217-1366 MR-150B 150 ■  ◎  85 1.2 2.6 ※ Grip: ■ = Vinyl ◎ = Coil spring

Read more less

Electric / wiring work with this one.  From peeling to splitting, various electric wiring work is done with one piece.  Blade angle 37 °. Put a blade in an oblique direction and cut intricate and deep place.◦ There is a model number with cutting blades for peeling (※ "H" listed in part number) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 37 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Copper Wire 217-0525 DNP-125 GH 125 ■  - 105 2.0 217-0534 DNP-150GH 150 ■  - 155 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

Read more less

The blade enters from an oblique direction. Reverse hand handling possible.  Blade angle 42 °. You can insert a blade in an oblique direction and cut intricate or deep place.◦ ENP: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 42 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Copper Wire 217-0507 ENP-115 115 ■  ◎  50 1.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Type angle 45 °. Pick up / pinch / line up  Like a tweezers, I grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-04: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 45 ° Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0428 SM-04 130 ●  □  60 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Pinch / Pull / Piss  The tip is a long and long jaw section, so grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-03: Easy-to-fit elastomer resin / Plastic spring (durability about 10 times higher than our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0419 SM-03 130 ●  □  60 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Type with tip. Strongly grasp / bend  It is robust and grasps strongly with a wide tip, and it corresponds to various processes such as wires and sheet metal.  There is no cutting ability. Type with tip.◦ Vinyl grip with easy-to-purchase price material S55C Hardness (HRC) 40 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-1223 FP-150G 150 ■  - 125 ※ Grip: ■ = Vinyl

Read more less

Grasp / collapse / bend / drag  Tightly grasp the wide tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-07: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0455 SM-07 115 ●  □  65 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Type angle 60 °. No tip nicks.  It is recommended that you do not want to scratch because there is no notch at the tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 60 ° Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-1524 NNP-150BG 150 ■  - 120 ※ Grip: ■ = Vinyl

Read more less

Elongated tip shape. No tip nicks.  It is recommended that you do not want to scratch because there is no notch at the tip.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ Vinyl grip with easy-to-purchase price material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-1515 NNP-150G 150 ■  - 120 ※ Grip: ■ = Vinyl

Read more less

Pinch / Pull / Piss  The tip is a long and long jaw section, so grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-03: Easy-to-fit elastomer resin / Plastic spring (durability about 10 times higher than our company)◦ NNP: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Replacement) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0482 NNP-130 130 ■  ◎  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Type angle 45 °. Pick up / pinch / line up  Like a tweezers, I grasp it delicately.  There is no cutting ability.◦ There is not a knurl in the gripper, but the slip prevention processing is done◦ SM-04: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ NNP-B: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Chrome vanadium steel Hardness (HRC) 42 - 50 (main unit) Blade angle 45 ° Product Code. Part number Nominal size grip weight （mm）  Material Spring （g） 217-0491 NNP-130B 130 ■  ◎  55 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

A blade angle of 22 ° makes it easy to enter a narrow place.  Series only blade angle 22 °. It has a total length of 125 mm, and it corresponds to a detailed and intricate work.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Easy-to-purchase vinyl grip / Continuous work is easier coil spring (※ Please inquire for spring exchange)◦ Stainless steel stopper (back of blade) / with opening preventing pin material S58C Hardness (HRC) 54 ~ 60 (blade part) Blade angle 22°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-1320 MPN-125 125 ■  ◎  65 3.0 ※ Grip: ■ = Vinyl ◎ = Coil spring

Read more less

Durability best in small class. High precision and beautiful cut surface.  Outstanding sharpness and high precision and beautiful cutting surfaces are the smallest plastic nippers.  We reduced the total weight to about 89% of our conventional product (PNP - 125 G - S), reducing the burden.◦ The shape of the blade surface is two kinds. Flat type (flat) / Ear type (curved surface) (※ stated "R" in part number)◦ Elastic elastomer resin grip / handy plastic grip / plastic spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-0215 HP-125 125 ●  □  70 5.0 ※ grip: ● = elastomer □ = plastic

Read more less

Plastic nipper series The smallest class.  With sharp sharpness, it demonstrates its power in delicate work.◦ Blade surface shape is flat type only◦ SM-02: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ MPN: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade  Blade angle 18 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-0190 SM-02 100 ●  □  55 3.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Industry's lightest! It is the lightness of shock.  Develop products based on customer's voice. Compared to the total weight of our conventional products (PNP), we have succeeded in significantly reducing weight from 77% (LPN - 150 S) to 82% (LPN - 125 S).  Cutting capacity and durability are equivalent to those of conventional products.◦ Blade surface shape is flat type only◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company)◦ Stopper with stick preventive (blade back) material S58C Hardness (HRC) 52 ~ 60 (blade part) Blade angle 15 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Plastic 217-0251 LPN-125S 125 ●  □  78 5.0 217-0260 LPN-150S  150 ●  □  115 5.0 ※ grip: ● = elastomer □ = plastic spring

Read more less

With "lead stopper" attached to prevent scattering of cut ends.  Due to the lead stopper, the cut wire will not scatter. It is safe to work because there is no need to drop the cut end to the floor and surroundings.◦ Blade surface shape is flat◦ Elastic elastomer resin grip which is familiar to hand◦ Easy continuous plastic work spring (durability about ten times our company) material Stainless steel Hardness (HRC) 50 ~ 57 (blade part) Blade angle 20 ° Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Copper Wire 217-0154 SP-31 130 ●  □  45 1.6 ※ grip: ● = elastomer □ = plastic spring

Read more less

Plastic nipper series The smallest class.  With sharp sharpness, it demonstrates its power in delicate work.◦ Blade surface shape is flat type only◦ SM-02: Elastomer resin / plastic spring easy to fit in hand (durability about 10 times compared to our company)◦ MPN: Vinyl Grip / Coil Spring at an Affordable Price (※ Please inquire for Spring Exchange)◦ Stopper with stick preventive (blade back) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18°  Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm）  Material Spring （g） Wire Plastic 217-1311 MPN-100 100 ■  ◎  50 1.0 3.0 ※ Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

  Nipper series minimum class.  With sharp sharpness, it demonstrates its power in delicate work.◦ MMP: Vinyl grip / coil spring at an affordable price (※ Please inquire for spring exchange) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18 °   Product Code Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0181 MMP-100 100 ■  ◎  50 1.6 Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Nipper series minimum class.  With sharp sharpness, it demonstrates its power in delicate work.◦ SM-01: Easy fit to hand Elastomer resin grip / Plastic spring (durability about 10 times compared to our company) material Vanadium steel Hardness (HRC) 57 ~ 62 (blade part) Blade angle 18 ° Product Code Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Copper Wire 217-0172 SM-01 100 ●  □  55 1.6 Grip: ● = Elastomer ■ = Vinyl □ = Plastic Spring ◎ = Coil Spring

Read more less

Nippa series The strongest cutting force. Piano wire Φ 2.0 mm possible.  Use the same highest grade steel as power Nippa. Improved blade angle and finish, improved cutting force and durability.◦ Apply the lever principle, strongly cut piano wire · hard steel wire◦ New type of angle is an angle.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability material SK 85 (SK 5) Hardness (HRC) 62 ~ 67 (blade part) Blade angle 15°  Product Code Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire Piano Wire 217-0808 NP-190BZ 190 ●  - 270 2.6 3.2 2.0 ※ Grip: ● = Elastomer ■ = Vinyl ▲ = Plastic

Read more less

Industry's lightest! It is the lightness of shock.  "I want a Nippa that is light and highly durable, not fatigue for long hours work." Based on the customer's voice, I planned and developed it.  (LN - 150 S) to 86% (LN - 125 S) of the total weight of our conventional products (NP).  Hand less fatigue, reduce burden when carrying mobile waist bags.◦ Elastic elastomer resin grip which is familiar to hand◦ Easy plastic springs for continuous work. Durability Approximately 10 times higher than our company (※ LN - 175 has no spring) material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle 15°  JIS JIS B 4635 J-180 * LN-175 only PAT.  ○  Product Code. Part number Nominal size grip weight Cutting Capacity(mm) （mm） Material Spring （g） Wire Copper Wire 217-0701 LN-125S 125 ●  □  82 1.5 2.6 217-0710 LN-150S 150 ●  □  122 1.9 3.2 217-0729 LN-175 175 ●  - 180 2.2 3.2 ※ grip: ● = elastomer □ = plastic spring

Read more less

Industry's lightest! It is the lightness of shock.  "I'd like pliers that are light, durable and hard to get tired of working for a long time." Planning and development based on customer's voice.  We succeeded in weight saving by about 72% (LP - 200) to 80% (LP - 150).  Hand less fatigue, reduce burden when carrying mobile waist bags.◦ Long size blade with VVF (3 core) wire cutting at once◦ Elastic elastomer resin grip which is familiar to hand material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle - - JIS - - PAT. - - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-0093 LP-150 150 ●  - 165 2.2 3.0 217-0109 LP-175 175 ●  - 200 2.8 3.5 217-0118 LP-200 200 ●  - 265 3.4 4.0 ※ grip: ● = elastomer

Read more less

Piano wire · hard steel wire OK! Please feel the difference between steel and finish.  In the power series, the quality of the steel is different. We used the finest steel materials, improved blade angle and finishing work, improved cutting force and durability. With eccentric lever, strongly cut piano wire · hard steel wire.◦ VVF 3 long sized blade capable of cutting the core wire at one time◦ In the gripper part there is a diamond shape with nuts, bolts added◦ From the main body to the steering wheel, a smooth shape without catching◦ Handle: Easy to grip and easy to grip. Elastic elastomer resin grip◦ Grip hole for falling prevention strap installation material SK 85 (SK 5) JIS - Hardness (HRC) 62 ~ 67 (blade part) PAT. - Blade angle - Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm) Material Spring （g） Wire Copper Wire Piano Wire 217-1357 PP-170 170 ●  - 210 2.2 3.0 2.0 217-0312 PP-200 200 ●  - 245 2.8 3.5 2.0 217-0321 PP-220 220 ●  - 320 3.4 4.0 2.0 ※ grip: ● = elastomer

Read more less

Electric installation workers can use safely.  We are aiming at a lot of people who work in the office. We have a lot of work to do. With eccentric lever, strongly disconnect VVF line.◦ VVF 3 long sized blade capable of cutting the core wire at one time◦ In the gripper part there is a diamond shape with nuts, bolts added◦ With terminal crimping function (Simple type: 1.25 ~ 5.5 m²)◦ From the main body to the steering wheel, a smooth shape without catching◦ Handle: Easy to grip and easy to grip. Elastic elastomer resin grip◦ Grip hole for falling prevention strap installation material Vanadium steel Hardness (HRC) 62 ~ 67 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-1737 DP-200 200 ●  - - 245 2.8 3.5 217-1746 DP-220 220 ●  - - 320 3.4 4.0 ※ grip: ● = elastomer

Read more less

Cut / bend / Screwdrive function / Corresponds to electric work.  It is an evolutionary form of a telephone radio pliers. It is possible to correspond to various fields in the field with just one.◦ Two kinds of flu material. Elastomer resin that is familiar to the hand / Vinyl that is easy to purchase◦ Coil spring for easy continuous operation material Chrome vanadium steel Hardness (HRC) 54 ~ 62 (blade part) Product Code. Part number Nominal size grip weight Cutting Capacity (mm) （mm） Material Spring （g） Wire Copper Wire 217-0394 BR-150G-S 150 ■  ◎  130 1.5 2.6 ※ Grip: ● = Elastomer ■ = Vinyl ◎ = Coil spring

Read more less

"Strong nipper" is one of the JIS standard categories. Despite being a standard product, we succeeded in weight saving and function improvement pursuing the shape and structure to the limit of the standard. It corresponds to various wires, promising excellent sharpness and comfort.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous spring coil spring (※ stated as "S" in product number) / without spring◦ There is a model number with a blade hole for stripping peeling (* described as "H" in part number) Product Code. Part number Nominal size weight Cutting Capacity(mm) （mm) （g) Wire Copper Wire Piano Wire 217-0136 NP-190 G 190 265 2.6 3.2 2

Read more less

"Strong nipper" is one of the JIS standard categories. Despite being a standard product, we succeeded in weight saving and function improvement pursuing the shape and structure to the limit of the standard. It corresponds to various wires, promising excellent sharpness and comfort.◦ Three types of flu material. Elastomer resin that is familiar to hand / Vinyl at price that is easy to ask for price / Plastic with high durability◦ Easy continuous spring coil spring (※ stated as "S" in product number) / without spring◦ There is a model number with a blade hole for stripping peeling (* described as "H" in part number)   material S58C Hardness (HRC) 56 ~ 64 (blade part) Blade angle 15° JIS JIS B 4635 J-130 / J-160 PAT. - - Product Code. Part number Nominal size grip weight Cutting Capacity(mm) （mm) Material Spring （g) Wire Copper Wire 217-0011 NP-125 GH 125 ■ - - 90 1.5 2.6 217-0020 NP-150GH 150 ■ - - 155 1.9 3.2

Read more less

LOBSTER Compact Aluminum Cutter with Stainless Steel Cutting Blade APS20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Remark 215-0691 APS20A 160g 215mm 38mm Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 1.6 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less   IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum nippers APN20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Retail/User prices Remark 215-0682 APN20A 170g 215mm 38mm open price Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 2.0 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less than 980N IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Adjustable Wrenches With Insulated Grip S36  • Despite the 250-mm body, the jaws open 36-mm wide, which is a standard opening for a 300-mm body• Test voltage: 20 kV for 1 minute (Operating temperature range: -20 ° C to 70 ° C)Specifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension Remark 215-6127 S36 500g 260mm 9.0mm 15.5mm 0～36mm M24 with insulation grip IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useInsulation is provided for the molded cover (grip) only. When using this tool on live wires, do not touch any part other than the molded cover.Be sure to wear the insulation protection gear (rubber gloves and rubber boots).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.• Despite the 250-mm body, the jaws open 36-mm wide, which is a standard opening for a 300-mm body• Test voltage: 20 kV for 1 minute (Operating temperature range: -20 ° C to 70 ° C)SpecificationsIMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useInsulation is provided for the molded cover (grip) only. When using this tool on live wires, do not touch any part other than the molded cover.Be sure to wear the insulation protection gear (rubber gloves and rubber boots).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Adjustable Wrenches M • 1.5 times higher strength than JIS powerful class wrenches (M200 to 375).LOBSTER original adjustable angle wrench.• LOBSTER has been making adjustable wrenches for 80 years. They are manufactured under strict quality control standards. Their strength is higher than JIS powerful class wrenches.• The body and parts undergo proprietary machining on purpose-specific machinery in a streamlined production process from forging to finishing that renders uniform precision and excellent durability.Use / Application• Tightening and loosening nuts and boltsSpecifications Product Code. Model No. weight size1 size2 size3 Jaw Capacity Bolt, nut maximum dimension Torque strength 215-5021 M150 120g 160mm 6.0mm 10.0mm 0～20mm M12 184.9 215-5030 M200 250g 206mm 7.5mm 13.0mm 0～24mm M16 411.9 215-5049 M250 440g 258mm 9.0mm 15.5mm 0～29mm M18 691.4 215-5058 M300 700g 304mm 10.0mm 18.0mm 0～34mm M22 1176.8 215-5067 M375 1350g 385mm 14.0mm 23.0mm 0～44mm M27 2206.5 215-5076 M450 1900g 465mm 13.5mm 24.0mm 0～53mm M33 3079.1 215-5085 M600 3400g 615mm 16.5mm 30.0mm 0～67mm M42 3853.8 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useAdjust the width across flats with the bolt or nut firmly gripped at the back of the jaw.Turn the wrench toward the lower jaw.Do not extend wrenches with a pipe, etc.Do not use wrenches as a substitute for a hammer.Do not apply impact to wrenches by hitting them with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hybrid Water Pump pliers UU4150  • The jaw opening varies in 6 steps at irregular pitches that accommodate pipe standards. The handle opening stays the same for the most part, regardless of the target workpiece size.• Owing to the 3-point support structure and deformed tooth profile, this tool can securely work with the grip.• Safety design (with stopper) to prevent hands being caught in the handle.• Applicable to nuts up to 41 mm in width across flats (M27), up to 50 mm pipe / round rod, and 3/8 stud bolts.• Lightweight design: Only 280 g (approx. 30 g weight reduction in comparison with our conventional models)• New profile that does not cause damage to the head of nuts.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 size4 size5 Bolt, nut maximum dimension 215-0664 UU4150 280g 226mm 9.0mm 43mm 52mm 50mm M27 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Combination Pliers LOBSTER pliers feature a proud history that dates back to 1928 as the first pliers made in Japan. The excellent quality is highly rated and trusted.Use / Application• Tightening and removing nuts and bolts• Cutting, twisting, bending and tensioning wires• Bending thin steel plates• Gripping objects that can not gripped by handSpecifications  Product Code. Model No. weight size1 size2 size3 215-7463 P200 250g 203mm 11mm 46.0mm 215-7472 P250 360g 248mm 12mm 58.0mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not infect target objects unstably. Otherwise, the tool may slip, causing your fingers to be caught in the tool.During work, wear protective goggles.Do not use this tool as a substitute for a hammer.Do not apply impact to this tool by hitting it with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Crimping Side-Cutting Pliers CSC225  Specifications Product Code. Model No. weight size1 Remark 215-0576 CSC225 365g 365mm Cutting capacity ①Iron wire:φ3.6 ②Copper wire:φ4.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER  Side-Cutting Pliers 2508  Specifications Product Code. Model No. weight size1 Remark 215-0558 2508 350g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Long-Nose Pliers 2606  Specifications Product Code. Model No. weight size1 Remark 215-0521 2606 130g 150mm Cutting capacity ①Iron wire:φ1.6 ②Copper wire:φ2.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less