Sensors & PLC

Sensing distance 600 to 8000 mm Blind zone 0 to 590 mm Foreground suppression 600 to 1800 mm Max. setting zone 8000 mm Transducer frequency 80 kHz Switching frequency ≥ 3 Hz Response time ≤ 300 ms Hysteresis 100mm Standard sensing target 500 × 500 mm Resolution ≥ 0.180 mm Power voltage 12 - 30 VDC (ripple P-P: ≤ 10 %) Current consumption ≤ 80 mA (no load) Digital output Push-pull Analog output [voltage output] DC 0 - 10 V, [current output] DC 4 - 20 mA Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection Insulation resistance ≥ 50 MΩ (500 VDC megger) Dielectric strength Between the charging part and the case: 1,000 VAC~ 50 / 60 Hz for 1 min Vibration 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours Shock 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times Ambient temperature -25 to 70 ℃, storage: -40 to 85 ℃ (no freezing or condensation) Protection structure IP66, IP67 (IEC standard) Connection Connector models Connector type M12 5-pin plug connector Material Case: mount - SUS316L, body - PC, transducer: polyurethane foam, epoxy resin with glass Unit weight (packaged weight) ≈210g(≈330g)

Read more less

Sensing distance 120 to 1300 mm Blind zone 0 to 115 mm Foreground suppression 120 to 360 mm Max. setting zone 1300 mm Transducer frequency 200kHz Switching frequency ≥ 10 Hz Response time ≤ 100 ms Hysteresis 20mm Standard sensing target 200 × 200 mm Resolution ≥ 0.175 mm Power voltage 12 - 30 VDC (ripple P-P: ≤ 10 %) Current consumption ≤ 45 mA (no load) Digital output Push-pull Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection Insulation resistance ≥ 50 MΩ (500 VDC megger) Dielectric strength Between the charging part and the case: 1,000 VAC~ 50 / 60 Hz for 1 min Vibration 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours Shock 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times Ambient temperature -25 to 70 ℃, storage: -40 to 85 ℃ (no freezing or condensation) Protection structure IP66, IP67 (IEC standard), IP69K (DIN standard) Connection Connector models Connector type M12 5-pin plug connector Material Case: mount - SUS316L, body - PC, transducer: polyurethane foam, epoxy resin with glass Unit weight (packaged weight) ≈ 32 g (≈ 90 g)

Read more less

Sensing distance 600 to 8000 mm Blind zone 0 to 590 mm Foreground suppression 600 to 1800 mm Max. setting zone 8000 mm Transducer frequency 80 kHz Switching frequency ≥ 3 Hz Response time ≤ 300 ms Hysteresis 100mm Standard sensing target 500 × 500 mm Resolution ≥ 0.180 mm Power voltage 12 - 30 VDC (ripple P-P: ≤ 10 %) Current consumption ≤ 80 mA (no load) Digital output Push-pull Analog output [voltage output] DC 0 - 10 V, [current output] DC 4 - 20 mA Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection Insulation resistance ≥ 50 MΩ (500 VDC megger) Dielectric strength Between the charging part and the case: 1,000 VAC~ 50 / 60 Hz for 1 min Vibration 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours Shock 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times Ambient temperature -25 to 70 ℃, storage: -40 to 85 ℃ (no freezing or condensation) Protection structure IP66, IP67 (IEC standard) Connection Connector models Connector type M12 5-pin plug connector Material Case: mount - SUS316L, body - PC, transducer: polyurethane foam, epoxy resin with glass Unit weight (packaged weight) ≈210g(≈330g)

Read more less

Sensing distance 120 to 1300 mm Blind zone 0 to 115 mm Foreground suppression 120 to 360 mm Max. setting zone 1300 mm Transducer frequency 200kHz Switching frequency ≥ 10 Hz Response time ≤ 100 ms Hysteresis 20mm Standard sensing target 200 × 200 mm Resolution ≥ 0.175 mm Power voltage 12 - 30 VDC (ripple P-P: ≤ 10 %) Current consumption ≤ 45 mA (no load) Digital output Push-pull Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection Insulation resistance ≥ 50 MΩ (500 VDC megger) Dielectric strength Between the charging part and the case: 1,000 VAC~ 50 / 60 Hz for 1 min Vibration 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours Shock 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times Ambient temperature -25 to 70 ℃, storage: -40 to 85 ℃ (no freezing or condensation) Protection structure IP66, IP67 (IEC standard), IP69K (DIN standard) Connection Connector models Connector type M12 5-pin plug connector Material Case: mount - SUS316L, body - PC, transducer: polyurethane foam, epoxy resin with glass Unit weight (packaged weight) ≈ 32 g (≈ 90 g)

Read more less

Sensing distance 65 to 600 mm Blind zone 0 to 59 mm Foreground suppression 65 to 195 mm Max. setting zone 600mm Transducer frequency 305 kHz Switching frequency ≥ 12.5 Hz Response time ≤ 64 ms Hysteresis 5mm Standard sensing target 200 × 200 mm Resolution ≥ 0.069 mm Power voltage 12 - 30 VDC (ripple P-P: ≤ 10 %) Current consumption ≤ 40 mA (no load) Digital output Push-pull Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection Insulation resistance ≥ 50 MΩ (500 VDC megger) Dielectric strength Between the charging part and the case: 1,000 VAC~ 50 / 60 Hz for 1 min Vibration 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours Shock 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times Ambient temperature -25 to 70 ℃, storage: -40 to 85 ℃ (no freezing or condensation) Protection structure IP66, IP67 (IEC standard), IP69K (DIN standard), IP68 Connection Connector models Connector type M12 5-pin plug connector Material Case: mount - SUS316L, body - PC, transducer: polyurethane foam, epoxy resin with glass Unit weight (packaged weight) ≈ 30 g (≈ 85 g )

Read more less

Sensing distance 120 to 1300 mm Blind zone 0 to 115 mm Foreground suppression 120 to 360 mm Max. setting zone 1300 mm Transducer frequency 200kHz Switching frequency ≥ 10 Hz Response time ≤ 100 ms Hysteresis 20mm Standard sensing target 200 × 200 mm Resolution ≥ 0.175 mm Power voltage 12 - 30 VDC (ripple P-P: ≤ 10 %) Current consumption ≤ 45 mA (no load) Digital output Push-pull Analog output [current output] DC 4 -20 mA Protection circuit Surge protection circuit, output short over current protection circuit, reverse polarity protection Insulation resistance ≥ 50 MΩ (500 VDC megger) Dielectric strength Between the charging part and the case: 1,000 VAC~ 50 / 60 Hz for 1 min Vibration 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours Shock 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times Ambient temperature -25 to 70 ℃, storage: -40 to 85 ℃ (no freezing or condensation) Protection structure IP66, IP67 (IEC standard), IP69K (DIN standard) Connection Connector models Connector type M12 5-pin plug connector Material Case: mount - SUS316L, body - PC, transducer: polyurethane foam, epoxy resin with glass Unit weight (packaged weight) ≈ 32 g (≈ 90 g)

Read more less

LSE3-4A5R2-ET Laser for detection emitting property : Infrared laser: 1 Emitting property_Laser class : CLASS 1 Emitting property_Wavelength band : 905nm Monitoring zone : 0.3×0.3 ~ 5.6×5.6 m Power voltage : 10 ~ 35 VDC  Laser for detection emitting property Infrared laser: 1 Emitting property_Laser class CLASS 1 Emitting property_Wavelength band 905nm Emitting property_Max. pulse output power 80W Laser for installation emitting property Visible light laser: 3 Emitting property_Laser class CLASS 3R Emitting property_Wavelength band 650 nm Emitting property_Max. pulse output power 4 mW Min. size of the scanning target Detection distance of 3m : 2.1×2.1×2.1 cm, Detection distance of 5m : 3.5×3.5×3.5 cm Scanning frequency 15 Hz Response time ≤ 20 to 80ms + monitoring time Monitoring zone 0.3×0.3 ~ 5.6×5.6 m Angular resolution 0.4° Aperture angle 90° Object reflectivity Min. 2% Korean Railway Standards KRS SG 0068 Weight ≈ 0.9 kg (≈ 1.1 kg) Power voltage 10 ~ 35 VDC  Power consumption ＜ 10 W Input Photocoupler input: 1H: ≥ 8 - 30 VDC, L: ≤ 3 VDC Output PhotoMOS relay output: 2Resistive load: 35 VDC/ 24 VAC~, ≤ 80 mA Vibration Max. 2G (18.7m/s²) Shock 30G/18ms Environment_Ambient illumination ≤ 100,000 lx Environment_Ambient temperature -30 to 60 ℃, storage: -30 ~ 70 ℃ (no freezing or condensation) Environment_Ambient humidity 0 to 95 %RH, storage: 0 to 95 %RH (no freezing or condensation) Protection structure IP67(IEC standard) Cable_Power, I/O Ø 5 mm, 8-wire, 5 m Cable_Ethernet 5 mm, 4-wire, 3 m, shield cable, RJ45 connector Core AWG26 (0.16 mm, 7-core), insulator outer diameter: Ø 1 mm Material Case: AL, Window: PC Communication interface Ethernet Sold separately Main bracket: BK-LSE3, Sub bracket: BK-LSE2-SUB Component_PC program atLidar (laser scanner program)

Read more less

LSE2-A5R2-ET Laser for detection emitting property : Infrared laser: 1 Emitting property_Laser class : CLASS 1 Emitting property_Wavelength band : 905nm Emitting property_Max. pulse output power : 27W Power voltage : 24VDC 

Read more less

LSE3-4A10R2-ET Laser for detection emitting property : Infrared laser: 1 Emitting property_Laser class : CLASS 1 Emitting property_Wavelength band : 905nm Monitoring zone : 0.3×0.3 ~ 10×10 m Power voltage : 10 ~ 35 VDC  Laser for detection emitting property Infrared laser: 1 Emitting property_Laser class CLASS 1 Emitting property_Wavelength band 905nm Emitting property_Max. pulse output power 80W Laser for installation emitting property Visible light laser: 3 Emitting property_Laser class CLASS 3R Emitting property_Wavelength band 650 nm Emitting property_Max. pulse output power 4 mW Min. size of the scanning target Detection distance of 3m : 2.1×2.1×2.1 cm, Detection distance of 5m : 3.5×3.5×3.5 cm, Detection distance of 10m : 7.0×7.0×7.0 cm Scanning frequency 15 Hz Response time ≤ 20 to 80ms + monitoring time Monitoring zone 0.3×0.3 ~ 10×10 m Angular resolution 0.4° Aperture angle 90° Object reflectivity Min. 2% Korean Railway Standards KRS SG 0068 Weight ≈ 0.9 kg (≈ 1.1 kg) Power voltage 10 ~ 35 VDC  Power consumption ＜ 10 W Input Photocoupler input: 1H: ≥ 8 - 30 VDC, L: ≤ 3 VDC Output PhotoMOS relay output: 2Resistive load: 35 VDC/ 24 VAC~, ≤ 80 mA Vibration Max. 2G (18.7m/s²) Shock 30G/18ms Environment_Ambient illumination ≤ 100,000 lx Environment_Ambient temperature -30 to 60 ℃, storage: -30 ~ 70 ℃ (no freezing or condensation) Environment_Ambient humidity 0 to 95 %RH, storage: 0 to 95 %RH (no freezing or condensation) Protection structure IP67(IEC standard) Cable_Power, I/O Ø 5 mm, 8-wire, 5 m Cable_Ethernet 5 mm, 4-wire, 3 m, shield cable, RJ45 connector Core AWG26 (0.16 mm, 7-core), insulator outer diameter: Ø 1 mm Material Case: AL, Window: PC Communication interface Ethernet Sold separately Main bracket: BK-LSE3, Sub bracket: BK-LSE2-SUB Component_PC program atLidar (laser scanner program)

Read more less

BD-030R Spot diameter : Near: ≈ 100×100 ㎛Reference: ≈ 100×100 ㎛Far: ≈ 100×100 ㎛ Resolution : 1㎛ Reference distance : 27.3 mm Max. measurement range : 24.9 to 29.7 mm Linearity : ± 0.1% of F.S. Spot diameter Near: ≈ 100×100 ㎛Reference: ≈ 100×100 ㎛Far: ≈ 100×100 ㎛ Resolution 1㎛ Reference distance 27.3 mm Max. measurement range 24.9 to 29.7 mm Linearity ± 0.1% of F.S. Temperature Characteristics ± 0.05% of F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Regular reflection Light Source_Laser class Class 1 (IEC/EN), Class I (FDA(CDRH) CFR Part 1002) Laser Pulse duration Max. 2ms Light Source_Output Max. 300㎼ Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Case: Polycarbonate, Sensing part: Glass, Cable: Polyvinyl chloride Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 55 g (≈ 205 g)

Read more less

BD-100R Spot diameter : Near: ≈ 200×200 ㎛Reference: ≈ 220×220 ㎛Far: ≈ 240×240 ㎛ Resolution : 4㎛ Reference distance : 98.3 mm Max. measurement range : 86.3 to 110.3 mm Linearity : ± 0.15% of F.S. Spot diameter Near: ≈ 200×200 ㎛Reference: ≈ 220×220 ㎛Far: ≈ 240×240 ㎛ Resolution 4㎛ Reference distance 98.3 mm Max. measurement range 86.3 to 110.3 mm Linearity ± 0.15% of F.S. Temperature Characteristics ± 0.06% of F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Regular reflection Light Source_Laser class Class 1 (IEC/EN), Class I (FDA(CDRH) CFR Part 1002) Laser Pulse duration Max. 2ms Light Source_Output Max. 300㎼ Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Case: Polycarbonate, Sensing part: Glass, Cable: Polyvinyl chloride Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 66 g (≈ 228 g)

Read more less

BD-100 Spot diameter : Near(80mm): Approx. 480×1870 ㎛Reference(100mm): Approx. 410×1330 ㎛Far(120mm): Approx. 330×950 ㎛ Resolution : 4㎛ Reference distance : 100mm Max. measurement range : 70 to 130mm Linearity : 0.15% F.S. (in 80 to 120mm) Spot diameter Near(80mm): Approx. 480×1870 ㎛Reference(100mm): Approx. 410×1330 ㎛Far(120mm): Approx. 330×950 ㎛ Resolution 4㎛ Reference distance 100mm Max. measurement range 70 to 130mm Linearity 0.15% F.S. (in 80 to 120mm) Temperature Characteristics 0.06% F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Diffuse reflection Light Source_Laser class Class 2 (IEC/EN), Class II (FDA(CDRH) CFR Part 1002) Laser Pulse duration Max. 2ms Light Source_Output Max. 1㎽ Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude at frequency of 10 to 55Hzin each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Case: Polycarbonate, Sensing part: Glass, Cable: Polyvinyl chloride Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 68 g (≈ 233 g)

Read more less

BD-065R Spot diameter : Near: ≈ 150×150 ㎛Reference: ≈ 150×150 ㎛Far: ≈ 150×150 ㎛ Resolution : 2㎛ Reference distance : 62.9 mm Max. measurement range : 56.9 to 68.9 mm Linearity : ± 0.1% of F.S. Spot diameter Near: ≈ 150×150 ㎛Reference: ≈ 150×150 ㎛Far: ≈ 150×150 ㎛ Resolution 2㎛ Reference distance 62.9 mm Max. measurement range 56.9 to 68.9 mm Linearity ± 0.1% of F.S. Temperature Characteristics ± 0.05% of F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Regular reflection Light Source_Laser class Class 1 (IEC/EN), Class I (FDA(CDRH) CFR Part 1002) Laser Pulse duration Max. 2ms Light Source_Output Max. 300㎼ Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Case: Polycarbonate, Sensing part: Glass, Cable: Polyvinyl chloride Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 66 g (≈ 228 g)

Read more less

BD-300 Spot diameter : Near(160mm): ≈ 990×1,000 ㎛Reference(300mm): ≈ 490×510 ㎛Far(450mm): ≈ 365×355 ㎛ Resolution : 20 ㎛ Reference distance : 300mm Max. measurement range : 160 ~ 450 mm Linearity : ± 0.25% of F.S. Spot diameter Near(160mm): ≈ 990×1,000 ㎛Reference(300mm): ≈ 490×510 ㎛Far(450mm): ≈ 365×355 ㎛ Resolution 20 ㎛ Reference distance 300mm Max. measurement range 160 ~ 450 mm Linearity ± 0.25% of F.S. Temperature Characteristics 0.08% of F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Diffuse reflection Light Source_Laser class Class 2 (IEC/EN), Class II (FDA (CDRH) CFR Part 1002) Light Source_Output ≤ 1 mW Laser Pulse duration Max. 2ms Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50℃, storage: -15 to 60℃ Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Front case: AL, Rear case: PC, Cable: PVC, Sensing part: Glass Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 151 g (≈ 330 g)

Read more less

BD-030 Spot diameter : Near(25mm): Approx. 290×790 ㎛Reference(30mm): Approx. 240×660 ㎛Far(35mm): Approx. 190×450 ㎛ Resolution : 1㎛ Reference distance : 30mm Max. measurement range : 20 to 40mm Linearity : 0.1% F.S. (in 25 to 35mm) Spot diameter Near(25mm): Approx. 290×790 ㎛Reference(30mm): Approx. 240×660 ㎛Far(35mm): Approx. 190×450 ㎛ Resolution 1㎛ Reference distance 30mm Max. measurement range 20 to 40mm Linearity 0.1% F.S. (in 25 to 35mm) Temperature Characteristics 0.05% F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Diffuse reflection Light Source_Laser class Class 1 (IEC/EN), Class I (FDA(CDRH) CFR Part 1002) Laser Pulse duration Max. 2ms Light Source_Output Max. 300㎼ Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Case: Polycarbonate, Sensing part: Glass, Cable: Polyvinyl chloride Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 56 g (≈ 209 g)

Read more less

BD-065 Spot diameter : Near(55mm): Approx. 360×1590 ㎛Reference(65mm): Approx. 290×1180 ㎛Far(75mm): Approx. 210×830 ㎛ Resolution : 2㎛ Reference distance : 65mm Max. measurement range : 50 to 80mm Linearity : 0.1% F.S. (in 55 to 75mm) Spot diameter Near(55mm): Approx. 360×1590 ㎛Reference(65mm): Approx. 290×1180 ㎛Far(75mm): Approx. 210×830 ㎛ Resolution 2㎛ Reference distance 65mm Max. measurement range 50 to 80mm Linearity 0.1% F.S. (in 55 to 75mm) Temperature Characteristics 0.06% F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Diffuse reflection Light Source_Laser class Class 2 (IEC/EN), Class II (FDA(CDRH) CFR Part 1002) Laser Pulse duration Max. 2ms Light Source_Output Max. 1㎽ Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude at frequency of 10 to 55Hzin each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Case: Polycarbonate, Sensing part: Glass, Cable: Polyvinyl chloride Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 68 g (≈ 233 g)

Read more less

BD-600 Spot diameter : Near(250mm): ≈ 1,140×1,175 ㎛Reference(600mm): ≈ 860×830 ㎛Far(1,000mm): ≈ 800×775 ㎛ Resolution : 40 ㎛ Reference distance : 600mm Max. measurement range : 250 ~ 1,000 mm Linearity : ± 0.25% of F.S. (250 ~ 600 mm)± 0.5% of F.S. (600 ~ 1,000 mm) Spot diameter Near(250mm): ≈ 1,140×1,175 ㎛Reference(600mm): ≈ 860×830 ㎛Far(1,000mm): ≈ 800×775 ㎛ Resolution 40 ㎛ Reference distance 600mm Max. measurement range 250 ~ 1,000 mm Linearity ± 0.25% of F.S. (250 ~ 600 mm)± 0.5% of F.S. (600 ~ 1,000 mm) Temperature Characteristics 0.08% of F.S./℃ Power voltage Using power from the amplifier unit. Light source Red semiconductor laser (wavelength: 660nm, IEC 60825-1:2014) Light Source_Optical method Diffuse reflection Light Source_Laser class Class 2 (IEC/EN), Class II (FDA (CDRH) CFR Part 1002) Light Source_Output ≤ 1 mW Laser Pulse duration Max. 2ms Operation indicator Power indicator: red LED, Laser emission indicator: green LED,NEAR/FAR indicator: green LED Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1㎲) ±500V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Max. Incandescent lamp 10,000 lx Environment_Ambient temperature -10 to 50℃, storage: -15 to 60℃ Environment_Ambient humidity 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) Protection structure IP67 (IEC Standards, except connector of extension cable) Material Front case: AL, Rear case: PC, Cable: PVC, Sensing part: Glass Amplifier unit compatibility BD Series amplifier unit: 1 Weight ≈ 153 g (≈ 332 g)

Read more less

BD-CRS Power voltage : Using power from the amplifier unit. Power consumption : Max. 2.3W Communication function : RS-232C, RS-485 Communication speed : 9600, 19200, 38400, 115200bps (default) Indication : 4 LED status indicators Power voltage Using power from the amplifier unit. Power consumption Max. 2.3W Communication function RS-232C, RS-485 Communication speed 9600, 19200, 38400, 115200bps (default) Indication 4 LED status indicators Function • Real-time monitoring• Executes every BD-Series feature and sets parameter by external device (Master) Environment_Ambient temperature -10 to 50℃, storage: -15 to 60℃ Environment_Ambient humidity Under 85%RH, storage: under 85%RH Vibration 1.5mm amplitude at frequency of 10 to 50Hzin each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Protection structure IP40 (IEC Standards) Material Case: Polycarbonate Accessories Side connector, Connector for RS485 Sold separately Communication converter (SCM-38I, SCM-US48I, SCM-WF48) Approval Weight※ Weight Approx. 91g (approx. 49g)

Read more less

BD-A1 Power consumption : Max. 2800mW (30VDC) Control input : No-voltage input Judgment output : NPN or PNP open collector output (Load current: Max. 100mA) Alarm output : NPN or PNP open collector output (Load current: Max. 100mA) Analog voltage output : -5 - 5 V, 0 - 5 V, 1 - 5 V (resistance: 100 Ω, ± 0.05% F.S., at 10 V) Analog current output : ) 4 - 20 mA (load resistance: ≤ 350 Ω, ± 0.2% F.S., at 16 mA) Residual voltage : NPN: Max. 1.5V, PNP: Max. 2.5V Power voltage 10-30VDC ±10% (When connecting BD-C Series communication converter, 12-30VDC) Power consumption Max. 2800mW (30VDC) Control input No-voltage input Judgment output NPN or PNP open collector output (Load current: Max. 100mA) Alarm output NPN or PNP open collector output (Load current: Max. 100mA) Analog voltage output -5 - 5 V, 0 - 5 V, 1 - 5 V (resistance: 100 Ω, ± 0.05% F.S., at 10 V) Analog current output ) 4 - 20 mA (load resistance: ≤ 350 Ω, ± 0.2% F.S., at 16 mA) Residual voltage NPN: Max. 1.5V, PNP: Max. 2.5V Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Response time 0.33, 0.5, 1, 2, 5 ms (5-step adjustment) Min. display unit [BD-030 / 065 / 100] 1 ㎛[BD-300 / 600] 10 ㎛ Display method Dual display by 6-digit, 11-segment LED Display range [BD-030 / 065 / 100] ± 99.999 to ± 99 mm (4-step paramete set)[BD-300 / 600] ± 999.99 to ± 999 mm (3-step parameter set) Display cycle Approx. 100ms Insulation resistance ≥ 20 MΩ (500 VDC megger) Noise immunity Square shaped noise by noise simulator (pulse width: 1 ㎲) ± 500 V Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours Shock 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times Environment_Ambient temperature -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) Environment_Ambient humidity Under 85%RH, storage: under 85%RH Protection structure IP40 (IEC Standards) Material Case: Polycarbonate, Cover: Polycarbonate, Cable: Polyvinyl chloride Connection method Connector type Supported sensor head Sensor head (BD-□) Supported comunication converter Communication converter (BD-C) Weight 126 g (≈ 228 g)

Read more less

PFB seriesBar display fiber optic sensor - Sensitivity setting by auto-teaching- Light volume indication by Bar LED- External teaching input/external synchronous input- Output delay time (40 ㎳ fixed)- Mutual interference prevention, power reverse connection protection,  output short circuit protection- Light ON/ Dark ON selection by slide switch Specification Model PFB-RN PFB-RP Appearance Sensing method Through beam type, reflection type ( By the fiber cable ) Sensing distance By the fiber sensor Power supply voltage 12 - 24 V d.c. ±10 % (Ripple less than 10%) Current consumption max 20 ㎃ Control output NPN open collector output, max 100 ㎃ (30 VDC) PNP open collector output, max 100 ㎃ (30 VDC) Output action L.ON, D.ON selection Time function NORMAL, ON-Delay, OFF-Delay (Delay time 40 ㎳ fixed) Responce time max 1 ㎳ Hysteresis Reflection type : Less than 10% of the sensing distance Light source (wave length) Infrared lightening LED (660 ㎚) LED Displayed by Bar LED Sensitivity adjustment Auto teaching/manual installution by using the set button Protective circuit Built in the reversed power supply connection protective circuit and output short protective circuit and motual interference prevention Ambient illumination • Sunlight : max 11,000 Lux • Incandescent lamp : max 3,000 Lux Ambient temperature -10 ~ 55 ℃(Surrounding storage temperature : -25 ~ 70 ℃) Ambient humidity 35 ~ 85 % R.H.(With no condensation) Protective structure IP 40 (IEC) Insulation resistance min 20 ㏁ (500 VDC between the code and case, between the adjustment switch and case) Dielectric strength 1000 VAC, 50/60 ㎐ for 1 min Vibration resistance 10 - 55 Hz double amplitude 1.5 ㎜, for 2 hours each in X, Y and Z directions Shock resistance 500 m/s² 3 times each in X, Y and Z directions Connection method • Code extended type, • Code length : 2 m. • No.of lines : 5 P, • thickness : Ø4 ㎜. • DIN rail installation structure Material Case : heat resistance ABS Weight Approx. 150g (Included the weight of box and fixing bracket)

Read more less

FT-320-05R Type : Standard type(bolt type) Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R1 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R1 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FT-320-06B Type : Standard type(bolt type) Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃   Type Standard type(bolt type) Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FT-420-10H Type : Standard type(bolt type) Sensing distance : 760mm Min. sensing target : Ø0.1mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 105℃ Type Standard type(bolt type) Sensing distance 760mm Min. sensing target Ø0.1mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 105℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FTC-1520-06B Type : Cylinder type Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃   Type Cylinder type Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FTC-220-05R Type : Cylinder type Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R1 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃   Type Cylinder type Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R1 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FTC-320-10 Type : Cylinder type Sensing distance : 150mm Min. sensing target : Ø1mm Allowable bend radius : R30 Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type Cylinder type Sensing distance 150mm Min. sensing target Ø1mm Allowable bend radius R30 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.  

Read more less

FTCS-220-05 Type : Cylinder+SUS type(SUS length 15mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃   Type Cylinder+SUS type(SUS length 15mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FTCSN-2520-05 Type : Ø2.47mm Side view Sensing distance : 120mm Min. sensing target : Ø0.0125mm Allowable bend radius : R15 Cable length : 2m Environment_Ambient temperature : -40 to 60℃   Type Ø2.47mm Side view Sensing distance 120mm Min. sensing target Ø0.0125mm Allowable bend radius R15 Cable length 2m Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type

Read more less

FTFU-210-05R Type : Flat type/Top view(up) Sensing distance : 110mm Min. sensing target : Ø0.04mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃   Type Flat type/Top view(up) Sensing distance 110mm Min. sensing target Ø0.04mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type

Read more less

FTLU-310-10R Type : L type/Top view(height 12.2mm) Sensing distance : 500mm Min. sensing target : Ø0.06mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃   Type L type/Top view(height 12.2mm) Sensing distance 500mm Min. sensing target Ø0.06mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series. Downloads

Read more less

FTLU1-310-10R Type : L type/Top view(height 17.2mm) Sensing distance : 500mm Min. sensing target : Ø0.06mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃   Type L type/Top view(height 17.2mm) Sensing distance 500mm Min. sensing target Ø0.06mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type

Read more less

FTS-320-05 Type : SUS type(SUS length 90mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃   Type SUS type(SUS length 90mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FTS-420-10 Type : SUS type(SUS length 90mm) Sensing distance : 500mm Min. sensing target : Ø1mm Allowable bend radius : R30(SUS part 10R) Cable length : 2m Environment_Ambient temperature : -40 to 70℃   Type SUS type(SUS length 90mm) Sensing distance 500mm Min. sensing target Ø1mm Allowable bend radius R30(SUS part 10R) Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.

Read more less

FTS1-320-05 Type : SUS type(SUS length 35mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 35mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type

Read more less

FTS2-320-05 Type : SUS type(SUS length 45mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 45mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type

Read more less

FTW11-210-10R Type : Area type(sensing height 11mm) Sensing distance : 750mm Min. sensing target : Ø0.07mm Allowable bend radius : R2 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type Area type(sensing height 11mm) Sensing distance 750mm Min. sensing target Ø0.07mm Allowable bend radius R2 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type

Read more less

GT-410-12V2 Type : Standard type(bolt type) Sensing distance : 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target : Ø0.1mm(FU-VA01)/Ø0.1mm(FU-VA02) Allowable bend radius : R25 Cable length : 1m Environment_Ambient temperature : -60 to 250℃   Type Standard type(bolt type) Sensing distance 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target Ø0.1mm(FU-VA01)/Ø0.1mm(FU-VA02) Allowable bend radius R25 Cable length 1m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type

Read more less

GTL-410-12V2 Type : L type Sensing distance : 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target : Ø0.2mm(FU-VA01)/Ø0.15mm(FU-VA02) Allowable bend radius : R25 Cable length : 1m Environment_Ambient temperature : -60 to 250℃   Type L type Sensing distance 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target Ø0.2mm(FU-VA01)/Ø0.15mm(FU-VA02) Allowable bend radius R25 Cable length 1m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type

Read more less

GTR-420-12H2 Type : Right-angle Sensing distance : 650mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 250℃ Type Right-angle Sensing distance 650mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type

Read more less

GTL-420-12H3 Type : L type Sensing distance : 680mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 350℃ Type L type Sensing distance 680mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 350℃ Sensing type Through-beam type  

Read more less

GTR-420-12H3 Type : Right-angle Sensing distance : 630mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 350℃ Type Right-angle Sensing distance 630mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 350℃ Sensing type Through-beam type

Read more less

FD-320-06B Type : Standard type(bolt type) Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃   Type Standard type(bolt type) Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.

Read more less

FD-320-F1 Type : Standard type(bolt type) Sensing distance : 60mm Min. sensing target : Ø0.03mm Allowable bend radius : R10 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃   Type Standard type(bolt type) Sensing distance 60mm Min. sensing target Ø0.03mm Allowable bend radius R10 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type

Read more less

FD-420-06B Type : Standard type(bolt type) Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type

Read more less

FD-620-10H Type : Standard type(bolt type) Sensing distance : 300mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 105℃ Type Standard type(bolt type) Sensing distance 300mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 105℃ Sensing type Diffuse reflective type

Read more less

FD-620-13B Type : Standard type(bolt type) Sensing distance : 100mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 100mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type

Read more less

FD-620-15H1 Type : Standard type(bolt type) Sensing distance : 275mm Min. sensing target : Ø0.08mm Allowable bend radius : R35 Cable length : 2m Environment_Ambient temperature : -40 to 150℃ Type Standard type(bolt type) Sensing distance 275mm Min. sensing target Ø0.08mm Allowable bend radius R35 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 150℃ Sensing type Diffuse reflective type

Read more less

FD-620-F2 Type : Standard type(bolt type) Sensing distance : 120mm Min. sensing target : Ø0.03mm Allowable bend radius : R30 Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type Standard type(bolt type) Sensing distance 120mm Min. sensing target Ø0.03mm Allowable bend radius R30 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.

Read more less