Autonics

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥ 0.8 mm × 1.8 mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲,Dark ON: Max. 80㎲ Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(Built-in) Indicator Operation indicator (red LED) Weight ≈ 2.4 g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Current consumption Max. 15mA Control output NPN open collector Load voltage ≤ 24VDC Load current Max. 50mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength 1,000VAC~ 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 30g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target ≥Ø0.8mm×2mm Hysteresis(distance) ≤0.05mm Response time Light ON: Max. 20㎲, Dark ON: Max. 100㎲ Response frequency 2kHz Light source Infrared LED(940nm) Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Weight_Body Approx. 50g Power voltage 5-24VDC  ±10%(ripple P-P : max. 10%) Load voltage ≤30VDC Load current Max. 100mA Residual voltage NPN: ≤1.2VDC, PNP: ≤ 1.2VDC Current consumption Max. 30mA Control output NPN open collector output Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance ≥20 MΩ (250 VDC megger) Noise immunity The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC Dielectric strength Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55℃, storage : -25 to 85℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Cable type Material Case: PBT, Sensing part: PC

Read more less

Sensing type Through-beam type Sensing Channel 4-channel Sensing distance 40mm Sensing target Opaquematerial of min. Ø4mm Light source Infrared LED(940nm) Response time Max. 1ms Power voltage 18-35VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 50mA Sensitivity adjustment Fixed Operation mode Dark ON Control output NPN open collector(individual 4 outputs) Connection type Cable type(Ø6, 3m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 65℃, storage: -25 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case, Cover: ABS Bracket H03/H04(G02) Weight Approx. 1.5kg(approx. 500g)

Read more less

Sensing type Through-beam type Sensing Channel 4-channel Sensing distance 40mm Sensing target Opaquematerial of min. Ø4mm Light source Infrared LED(940nm) Response time Max. 1ms Power voltage 18-35VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 50mA Sensitivity adjustment Fixed Operation mode Dark ON Control output NPN open collector(individual 4 outputs) Connection type Cable type(Ø6, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 65℃, storage: -25 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case, Cover: ABS Bracket H03/H04(G02) Weight Approx. 1.5kg(approx. 500g)

Read more less

Sensing type Retroreflective type(standard type) Sensing distance 5m(MS-2) Sensing target Opaque material of min. Ø60mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 50mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN, PNP open collector simultaneous output Connection type Terminal block type Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -20 to 55℃, storage: -25 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case, Lens cover: Polycarbonate, Sensing part: Acrylic, Bracket: Steel plate cold commercial,Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Accessories_Individual Reflector(MS-2) Accessories_Common Adjuster driver, Fixing bracket, Bolts, Nuts Weight Approx. 123g

Read more less

Sensing type Through-beam type Sensing distance 5m Sensing target Opaque material of min. Ø10mm Light source Infrared LED(940nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 50mA Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 70℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Bracket: Steel plate cold commercial, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Accessories_Common Fixing bracket, Bolts, Nuts Weight Approx. 180g

Read more less

Sensing type Diffuse reflective type Sensing distance 300mm Sensing target Opaque, Translucent material Light source Infrared LED(940nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 70℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at sensing distance Material Case: Acrylonitrile butadiene styrene, Sensing part: Acryl, Bracket: Steel plate cold commercial, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Accessories_Individual Adjuster driver Accessories_Common Fixing bracket, Bolts, Nuts Weight Approx. 100g

Read more less

Sensing type Through-beam type Sensing distance 3m Sensing target Opaque material of min. Ø5mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Dark ON Control output PNP open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 65℃, storage: -25 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 90% RH Material Case: Polycarbonate, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Weight Approx. 66g

Read more less

Sensing type Through-beam type Sensing distance 3m Sensing target Opaque material of min. Ø5mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Light ON Control output PNP open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 65℃, storage: -25 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 90% RH Material Case: Polycarbonate, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Weight Approx. 66g

Read more less

Sensing type Diffuse reflective type Sensing distance 2m Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 15mA Sensitivity adjustment Sensitivity adjuster Operation mode Dark ON Control output PNP open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -25 to 70℃ Protection structure IP64 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at sensing distance Material Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Indicator: Polycarbonate, Adjuster: IXEF Accessories Adjuster driver Weight Approx. 50g

Read more less

Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø12mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Cable type(Ø3.5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 4, M3 Nuts: 4, Adjuster driver Weight Approx. 115g (approx. 90g)

Read more less

Sensing type Through-beam type Sensing distance 10m Sensing target Opaque material of min. Ø12mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Cable type(Ø3.5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 4, M3 Nuts: 4, Adjuster driver Weight Approx. 115g (approx. 90g)

Read more less

Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m(MS-2A) Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Cable type(Ø3.5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Accessories_Individual Reflector(MS-2A) Weight Approx. 85g (approx. 60g)

Read more less

Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Cable type(Ø3.5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 70g (approx. 45g)

Read more less

Sensing type BGS reflective type Sensing distance 10 to 30mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1.5ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Cable type(Ø3.5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 10% of sensing distance Min. diameter of transmitting spot Approx. Ø5.0mm Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 50g

Read more less

Sensing type Through-beam type Sensing distance 1m Sensing target Opaque material of min. Ø2mm Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Dark ON Control output PNP open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -20 to 55℃, storage: -30 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polybutylene terephthalate, Sensing part: Polymethyl methacrylate, Bracket: Stainless steel 304,Bolt: Carbon steel wire for cold heading(SWCH10A) Weight Approx. 65g(approx. 40g)

Read more less

Sensing type Retroreflective type Sensing distance 10~200mm Sensing target Opaque material of min. Ø27mm(min. sensing target: opaque material of Ø2mm) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 20mA Operation mode Light ON Control output PNP open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -20 to 55℃, storage: -30 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polybutylene terephthalate, Sensing part: Polymethyl methacrylate, Bracket: Stainless steel 304,Bolt: Carbon steel wire for cold heading(SWCH10A) Weight Approx. 45g(approx. 25g)

Read more less

Sensing type Retroreflective type Sensing distance 10~200mm Sensing target Opaque material of min. Ø27mm(min. sensing target: opaque material of Ø2mm) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 20mA Operation mode Dark ON Control output PNP open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -20 to 55℃, storage: -30 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polybutylene terephthalate, Sensing part: Polymethyl methacrylate, Bracket: Stainless steel 304,Bolt: Carbon steel wire for cold heading(SWCH10A) Weight Approx. 45g(approx. 25g)

Read more less

Sensing type Diffuse reflective type Sensing distance 5 to 30mm Sensing target Opaque, Translucent material(min. sensing target: Ø0.2mm) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 20mA Operation mode Dark ON Control output NPN open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case: polybutylene terephthalate, sensing part: polymethyl methacrylate,bracket: SUS304(steel use stainless 304), bolt: carbon steel, sleeve: SUS304(steel use stainless 304) Accessories Fixing bracket, M2 bolt: 2 Weight Approx. 40g (approx. 25g)

Read more less

Sensing type BGS reflective type Sensing distance 1 to 15mm Sensing target Opaque, Translucent material(min. sensing target: non-illuminated objects of Ø0.2mm) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 20mA Operation mode Light ON Control output NPN open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 5% at sensing distance Material Case: polybutylene terephthalate, sensing part: polymethyl methacrylate,bracket: SUS304(steel use stainless 304), bolt: carbon steel, sleeve: SUS304(steel use stainless 304) Accessories Fixing bracket, M2 bolt: 2 Weight Approx. 40g (approx. 25g)

Read more less

Sensing type Through-beam type Sensing distance 20m Sensing target Opaque material of min. Ø20mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN, PNP open collector simultaneous output Connection type Cable type(Ø4, 2.1m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonates, LED indicator: Polycarbonates, Sensing part: Polymethyl methacrylate acrylic Accessories_Common Adjustment screwdriver, fixing bracket, M18 fixing nut, fixing cap, M3 bolt, M3 nut Weight Approx. 190g(approx. 120g)

Read more less

Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø15mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 145g(approx. 95g)

Read more less

Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: PolycarbonateLens, Lens cover: Polymethyl Methacrylate Acrylic Weight Approx. 120g (approx. 60g)

Read more less

Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Accessories_Individual Reflector(MS-2A) Weight Approx. 115g(approx. 50g)

Read more less

Sensing type Through-beam type Sensing distance 20m Sensing target Opaque material of min. Ø7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 220g (approx. 140g)

Read more less

Sensing type Convergent reflective type Sensing distance 15mm Sensing target Color(opaque,translucent Material) Light source Full Color LED(red, green,blue) Response time 500㎲ Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment 3-level Operation mode color only,color + intensity Control output PNP open collector Timer function Timer Function Connection type Connector type(M12) Environment_Ambient illumination Incandescent lamp: Max. 3,000lx Environment_Ambient temperature -10 to 55℃, storage: -25 to 75℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance(may vary by sensing mode or sensitivity) Spot size 1.24×6.7mm(rectangular) Sensing mode C(color only) mode, C+I(color + intensity) mode Output mode Color match output, color mismatch output External input External SET cable input Material Case: polycarbonate, Sensing part: acrylic, Bracket: stainless steel 304 , Bolt: carbon steel Accessories Bracket, Fixing bolts: 2 , Adjustment screwdriver: 1 Weight Approx. 80g(approx. 14g)

Read more less

Sensing type Diffuse reflective type Sensing distance 300mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN, PNP open collector simultaneous output Connection type Cable type(Ø4, 2.1m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case: Polycarbonates, LED indicator: Polycarbonates, Sensing part: Polymethyl methacrylate acrylic Accessories_Common Adjustment screwdriver, fixing bracket, M18 fixing nut, fixing cap, M3 bolt, M3 nut Weight Approx. 130g(approx. 60g)

Read more less

Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 4m(MS-2A) Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN, PNP open collector simultaneous output Connection type Cable type(Ø4, 2.1m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonates, LED indicator: Polycarbonates, Sensing part: Polymethyl methacrylate acrylic Accessories_Individual Reflector(MS-2A) Accessories_Common Adjustment screwdriver, fixing bracket, M18 fixing nut, fixing cap, M3 bolt, M3 nut Weight Approx. 140g(Approx. 60g)

Read more less

Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 35g (approx. 10g)

Read more less

Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 35g (approx. 10g)

Read more less

Sensing type Through-beam type Sensing distance 10m Sensing target Opaque material of min. Ø12mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 4, M3 Nuts: 4, Adjuster driver Weight Approx. 45g (approx. 20g)

Read more less

Sensing type Through-beam type Sensing distance 10m Sensing target Opaque material of min. Ø12mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 4, M3 Nuts: 4, Adjuster driver Weight Approx. 45g (approx. 20g)

Read more less

Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø12mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 4, M3 Nuts: 4, Adjuster driver Weight Approx. 45g (approx. 20g)

Read more less

Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø12mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 4, M3 Nuts: 4, Adjuster driver Weight Approx. 45g (approx. 20g)

Read more less

Sensing type Diffuse reflective type Sensing distance 300mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 35g (approx. 10g)

Read more less

Sensing type Diffuse reflective type Sensing distance 300mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 35g (approx. 10g)

Read more less

Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m(MS-2A) Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Accessories_Individual Reflector(MS-2A) Weight Approx. 55g (approx. 30g)

Read more less

Sensing type Narrow beam reflective type Sensing distance 30 to 70mm Sensing target Opaque, Translucent material(min. sensing target: min. Ø0.2mm(copper wire)) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Cable type(Ø3.5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 25% of sensing distance Min. diameter of transmitting spot Approx. Ø2.0mm Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 45g

Read more less

Sensing type Narrow beam reflective type Sensing distance 30 to 70mm Sensing target Opaque, Translucent material(min. sensing target: min. Ø0.2mm(copper wire)) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Cable type(Ø3.5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP65 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 25% of sensing distance Min. diameter of transmitting spot Approx. Ø2.0mm Material Case: Polycarbonate+Acrylonitrile butadiene styrene, LED Cap: Polycarbonate, Sensing part: Polymethyl methacrylate,Bracket: SUS304(steel use stainless 304), Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum,Sleeve: Brass, Ni-plate Accessories Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 45g

Read more less

Oil resistant/oil proof Oil resistant type Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP67 (IEC standard), IP67G (JEM standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case: Acrylonitrile butadiene styrene, LED Cap: PA12, Lens cover: Polymethyl Methacrylate Acrylic Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Weight Approx. 100g(approx. 50g)

Read more less

Oil resistant/oil proof Oil proof type Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP67(IEC standard), IP67F(JEM standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case: Acrylonitrile butadiene styrene, LED Cap: PA12, Lens cover: Polymethyl Methacrylate Acrylic Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Weight Approx. 100g(approx. 50g)

Read more less

Oil resistant/oil proof Oil resistant type Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC  ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP67 (IEC standard), IP67G (JEM standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case: Acrylonitrile butadiene styrene, LED Cap: PA12, Lens cover: Polymethyl Methacrylate Acrylic Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Weight Approx. 100g(approx. 50g)

Read more less