Autonics
Autonics Autonics Fiber optic sensor, Standard type(bolt type), FT-320-05R
FT-320-05R Type : Standard type(bolt type) Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R1 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R1 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$58.85
Autonics Autonics Fiber optic sensor, Standard type(bolt type), FT-320-06B
FT-320-06B Type : Standard type(bolt type) Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$40.26
Autonics Autonics Fiber optic sensor ,Standard type(bolt type) FT-420-10H
FT-420-10H Type : Standard type(bolt type) Sensing distance : 760mm Min. sensing target : Ø0.1mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 105℃ Type Standard type(bolt type) Sensing distance 760mm Min. sensing target Ø0.1mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 105℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$47.94
Autonics Autonics Fiber optic sensor, Cylinder type FTC-1520-06B
FTC-1520-06B Type : Cylinder type Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Cylinder type Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$30.47
Autonics Autonics Fiber optic sensor , Cylinder type FTC-220-05R
FTC-220-05R Type : Cylinder type Sensing distance : 110mm Min. sensing target : Ø0.3mm Allowable bend radius : R1 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Cylinder type Sensing distance 110mm Min. sensing target Ø0.3mm Allowable bend radius R1 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$53.39
Autonics Autonics Fiber optic sensor, Cylinder type FTC-320-10
FTC-320-10 Type : Cylinder type Sensing distance : 150mm Min. sensing target : Ø1mm Allowable bend radius : R30 Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type Cylinder type Sensing distance 150mm Min. sensing target Ø1mm Allowable bend radius R30 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$23.91
Autonics Autonics Fiber optic sensor, Cylinder+SUS type(SUS length 15mm) FTCS-220-05
FTCS-220-05 Type : Cylinder+SUS type(SUS length 15mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type Cylinder+SUS type(SUS length 15mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$30.47
Autonics Autonics Fiber optic sensor, Side view FTCSN-2520-05
FTCSN-2520-05 Type : Ø2.47mm Side view Sensing distance : 120mm Min. sensing target : Ø0.0125mm Allowable bend radius : R15 Cable length : 2m Environment_Ambient temperature : -40 to 60℃ Type Ø2.47mm Side view Sensing distance 120mm Min. sensing target Ø0.0125mm Allowable bend radius R15 Cable length 2m Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$102.45
Autonics Autonics Fiber optic sensor, Through-beam type FTFB-210-05R
FTFB-210-05R Type : Flat type/Side view+Top view(bending) Sensing distance : 110mm Min. sensing target : Ø0.04mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Side view+Top view(bending) Sensing distance 110mm Min. sensing target Ø0.04mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$71.84
Autonics Autonics Fiber optic sensor, Flat type/Top view(up) FTFU-210-05R
FTFU-210-05R Type : Flat type/Top view(up) Sensing distance : 110mm Min. sensing target : Ø0.04mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Top view(up) Sensing distance 110mm Min. sensing target Ø0.04mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$83.86
Autonics Autonics Fiber optic sensor, L type/Top view(height 12.2mm) FTLU-310-10R
FTLU-310-10R Type : L type/Top view(height 12.2mm) Sensing distance : 500mm Min. sensing target : Ø0.06mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type L type/Top view(height 12.2mm) Sensing distance 500mm Min. sensing target Ø0.06mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series. Downloads
$66.39
Autonics Autonics Fiber optic sensor, Through-beam type FTLU1-310-10R
FTLU1-310-10R Type : L type/Top view(height 17.2mm) Sensing distance : 500mm Min. sensing target : Ø0.06mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type L type/Top view(height 17.2mm) Sensing distance 500mm Min. sensing target Ø0.06mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$66.39
Autonics Autonics Fiber optic sensor , Through-beam type FTS-320-05
FTS-320-05 Type : SUS type(SUS length 90mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 90mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$38.16
Autonics Autonics Fiber optic sensor, Through-beam type FTS-420-10
FTS-420-10 Type : SUS type(SUS length 90mm) Sensing distance : 500mm Min. sensing target : Ø1mm Allowable bend radius : R30(SUS part 10R) Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 90mm) Sensing distance 500mm Min. sensing target Ø1mm Allowable bend radius R30(SUS part 10R) Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※FT-420-13 was discontinued. FT-420-13B is replacement.※Glass type is for BF5, BF4 Series.
$31.59
Autonics Autonics Fiber optic sensor, Through-beam type FTS1-320-05
FTS1-320-05 Type : SUS type(SUS length 35mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 35mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type
$42.50
Autonics Autonics Fiber optic sensor, Through-beam type FTS2-320-05
FTS2-320-05 Type : SUS type(SUS length 45mm) Sensing distance : 150mm Min. sensing target : Ø0.5mm Allowable bend radius : R10(SUS part R10) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 45mm) Sensing distance 150mm Min. sensing target Ø0.5mm Allowable bend radius R10(SUS part R10) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Through-beam type
$39.14
Autonics Autonics Fiber optic sensor, Area type(sensing height 11mm) FTW11-210-10R
FTW11-210-10R Type : Area type(sensing height 11mm) Sensing distance : 750mm Min. sensing target : Ø0.07mm Allowable bend radius : R2 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type Area type(sensing height 11mm) Sensing distance 750mm Min. sensing target Ø0.07mm Allowable bend radius R2 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Through-beam type
$119.93
Autonics Autonics Fiber optic sensor, Through-beam type GT-410-12V2
GT-410-12V2 Type : Standard type(bolt type) Sensing distance : 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target : Ø0.1mm(FU-VA01)/Ø0.1mm(FU-VA02) Allowable bend radius : R25 Cable length : 1m Environment_Ambient temperature : -60 to 250℃ Type Standard type(bolt type) Sensing distance 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target Ø0.1mm(FU-VA01)/Ø0.1mm(FU-VA02) Allowable bend radius R25 Cable length 1m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type
$345.53
Autonics Autonics Fiber optic sensor, L type GTL-410-12V2
GTL-410-12V2 Type : L type Sensing distance : 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target : Ø0.2mm(FU-VA01)/Ø0.15mm(FU-VA02) Allowable bend radius : R25 Cable length : 1m Environment_Ambient temperature : -60 to 250℃ Type L type Sensing distance 340mm(FU-VA01)/420mm(FU-VA02) Min. sensing target Ø0.2mm(FU-VA01)/Ø0.15mm(FU-VA02) Allowable bend radius R25 Cable length 1m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type
$372.78
Autonics Autonics Fiber optic sensor, Through-beam type, Right-angle GTR-420-12H2
GTR-420-12H2 Type : Right-angle Sensing distance : 650mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 250℃ Type Right-angle Sensing distance 650mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 250℃ Sensing type Through-beam type
$324.83
Autonics Autonics Fiber optic sensor, Through-beam type GTL-420-12H3
GTL-420-12H3 Type : L type Sensing distance : 680mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 350℃ Type L type Sensing distance 680mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 350℃ Sensing type Through-beam type
$366.21
Autonics Autonics Fiber optic sensor, Through-beam type GTR-420-12H3
GTR-420-12H3 Type : Right-angle Sensing distance : 630mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -60 to 350℃ Type Right-angle Sensing distance 630mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -60 to 350℃ Sensing type Through-beam type
$366.21
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-320-06B
FD-320-06B Type : Standard type(bolt type) Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$33.68
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-320-F1
FD-320-F1 Type : Standard type(bolt type) Sensing distance : 60mm Min. sensing target : Ø0.03mm Allowable bend radius : R10 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type Standard type(bolt type) Sensing distance 60mm Min. sensing target Ø0.03mm Allowable bend radius R10 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type
$28.24
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-420-06B
FD-420-06B Type : Standard type(bolt type) Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$38.16
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-620-10H
FD-620-10H Type : Standard type(bolt type) Sensing distance : 300mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 105℃ Type Standard type(bolt type) Sensing distance 300mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 105℃ Sensing type Diffuse reflective type
$47.94
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-620-13B
FD-620-13B Type : Standard type(bolt type) Sensing distance : 100mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Environment_Ambient temperature : -40 to 60℃ Type Standard type(bolt type) Sensing distance 100mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$29.35
Autonics Autonics Fiber optic sensor, Diffuse reflective type FD-620-15H1
FD-620-15H1 Type : Standard type(bolt type) Sensing distance : 275mm Min. sensing target : Ø0.08mm Allowable bend radius : R35 Cable length : 2m Environment_Ambient temperature : -40 to 150℃ Type Standard type(bolt type) Sensing distance 275mm Min. sensing target Ø0.08mm Allowable bend radius R35 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 150℃ Sensing type Diffuse reflective type
$101.34
Autonics Autonics Fiber optic sensor FD-620-F2
FD-620-F2 Type : Standard type(bolt type) Sensing distance : 120mm Min. sensing target : Ø0.03mm Allowable bend radius : R30 Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type Standard type(bolt type) Sensing distance 120mm Min. sensing target Ø0.03mm Allowable bend radius R30 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$23.91
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDC-320-05
FDC-320-05 Type : Cylinder type Sensing distance : 40mm Min. sensing target : Ø0.03mm Allowable bend radius : R15 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type Cylinder type Sensing distance 40mm Min. sensing target Ø0.03mm Allowable bend radius R15 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type
$20.68
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDC-320-06B
FDC-320-06B Type : Cylinder type Sensing distance : 35mm Min. sensing target : Ø0.0125mm Allowable bend radius : R5 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Cylinder type Sensing distance 35mm Min. sensing target Ø0.0125mm Allowable bend radius R5 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Flexible optical fiber (Multi core): A large number of ultra-fine cores are all surrounded by cladding. Easy to install it in the many places as the change of the intensity of radiation by bending is small.Break-resistant optical fiber: The fiber units contain a large number of independent fine fibers, by ensuring a high degree of flexibility. It can be used for moving parts (robot hand) and it is not easily broken.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$31.59
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDF-210-05R
FDF-210-05R Type : Flat type/Flat view Sensing distance : 30mm Min. sensing target : Ø0.0125mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Flat view Sensing distance 30mm Min. sensing target Ø0.0125mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$71.84
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDFN-210-05R
FDFN-210-05R Type : Flat type/Side view Sensing distance : 30mm Min. sensing target : Ø0.0125mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -40 to 60℃ Type Flat type/Side view Sensing distance 30mm Min. sensing target Ø0.0125mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type
$71.84
Autonics Autonics Fiber optic sensor, Plastic injection molding type FDP-320-10
FDP-320-10 Type : Plastic injection molding type Sensing distance : 120mm Min. sensing target : Ø0.03mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type Plastic injection molding type Sensing distance 120mm Min. sensing target Ø0.03mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$13.00
Autonics Autonics Fiber optic sensor, Plastic injection molding type FDPF-210-05R
FDPF-210-05R Type : Plastic injection molding type Sensing distance : 70mm Min. sensing target : Ø0.08mm Allowable bend radius : R1 Cable length : 1m Adapter : Adapter Environment_Ambient temperature : -30 to 70℃ Type Plastic injection molding type Sensing distance 70mm Min. sensing target Ø0.08mm Allowable bend radius R1 Cable length 1m Free cut Free cut Adapter Adapter Environment_Ambient temperature -30 to 70℃ Sensing type Diffuse reflective type
$131.92
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDR-610-10R
FDR-610-10R Type : Right-angle Sensing distance : 120mm Min. sensing target : Ø0.04mm Allowable bend radius : R1 Cable length : 1m Environment_Ambient temperature : -40 to 60℃ Type Right-angle Sensing distance 120mm Min. sensing target Ø0.04mm Allowable bend radius R1 Cable length 1m Free cut Free cut Environment_Ambient temperature -40 to 60℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for BF5 Series.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$66.39
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDRT-420-02B
FDRT-420-02B Type : Right-angle Sensing distance : 230mm Min. sensing target : Ø0.08mm Allowable bend radius : R5 Cable length : 2m Environment_Ambient temperature : -30 to 70℃ Type Right-angle Sensing distance 230mm Min. sensing target Ø0.08mm Allowable bend radius R5 Cable length 2m Free cut Free cut Environment_Ambient temperature -30 to 70℃ Sensing type Diffuse reflective type
$118.81
Autonics Autonics Fiber optic sensor FDS-420-05
FDS-420-05 Type : SUS type(SUS length 90mm) Sensing distance : 40mm Min. sensing target : Ø0.03mm Allowable bend radius : 15R(SUS part 10R) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 90mm) Sensing distance 40mm Min. sensing target Ø0.03mm Allowable bend radius 15R(SUS part 10R) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$34.80
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDS2-420-05
FDS2-420-05 Type : SUS type(SUS length 45mm) Sensing distance : 40mm Min. sensing target : Ø0.03mm Allowable bend radius : 15R(SUS part 10R) Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 45mm) Sensing distance 40mm Min. sensing target Ø0.03mm Allowable bend radius 15R(SUS part 10R) Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$35.92
Autonics Autonics Fiber optic sensor, Diffuse reflective type FDS2-620-10
FDS2-620-10 Type : SUS type(SUS length 45mm) Sensing distance : 120mm Min. sensing target : Ø0.03mm Allowable bend radius : R25(SUS part R10) Cable length : 2m Environment_Ambient temperature : -40 to 70℃ Type SUS type(SUS length 45mm) Sensing distance 120mm Min. sensing target Ø0.03mm Allowable bend radius R25(SUS part R10) Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 70℃ Sensing type Diffuse reflective type ※The sensing distance is a standard for red LED of BF4 Series and 10% of red LED is applied when it is green LED. It is applied to 40% of sensing distance for BF3RX.※Min. sensing target is a value measured opaque material in accurate output status and the sensing distance is different with the rated sensing distance.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]※Glass type is for BF5, BF4 Series.
$27.26
Autonics Autonics Fiber optic sensor, Area type FDW10-320-02B
FDW10-320-02B Type : Area type Sensing distance : 230mm Min. sensing target : Ø0.08mm Allowable bend radius : R5 Cable length : 2m Environment_Ambient temperature : -30 to 70℃ Type Area type Sensing distance 230mm Min. sensing target Ø0.08mm Allowable bend radius R5 Cable length 2m Free cut Free cut Environment_Ambient temperature -30 to 70℃ Sensing type Diffuse reflective type
$172.20
Autonics Autonics Fiber optic sensor, Area type FDW10T-320-02B
FDW10T-320-02B Type : Area type Sensing distance : 230mm Min. sensing target : Ø0.08mm Allowable bend radius : R5 Cable length : 2m Environment_Ambient temperature : -30 to 70℃ Type Area type Sensing distance 230mm Min. sensing target Ø0.08mm Allowable bend radius R5 Cable length 2m Free cut Free cut Environment_Ambient temperature -30 to 70℃ Sensing type Diffuse reflective type
$185.34
Autonics Autonics Fiber optic sensor, Convergent reflective type FLF-310-10V
FLF-310-10V Type : Flat type/Flat view Sensing distance : 60mm(FU-VA01)/70mm(FU-VA02) Min. sensing target : Ø3.9mm(FU-VA01)/Ø3.4mm(FU-VA02) Allowable bend radius : R25 Cable length : 1m Environment_Ambient temperature : -30 to 105℃ Type Flat type/Flat view Sensing distance 60mm(FU-VA01)/70mm(FU-VA02) Min. sensing target Ø3.9mm(FU-VA01)/Ø3.4mm(FU-VA02) Allowable bend radius R25 Cable length 1m Free cut Free cut Environment_Ambient temperature -30 to 105℃ Sensing type Convergent reflective type
$474.16
Autonics Autonics Fiber optic sensor, Convergent reflective type FLF-320-05
FLF-320-05 Type : Flat type/Flat view Sensing distance : 8mm Min. sensing target : Ø0.1mm Allowable bend radius : R15 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -30 to 70℃ Type Flat type/Flat view Sensing distance 8mm Min. sensing target Ø0.1mm Allowable bend radius R15 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -30 to 70℃ Sensing type Convergent reflective type
$119.93
Autonics Autonics Fiber optic sensor, Convergent reflective type FLF-320-05R
FLF-320-05R Type : Flat type/Flat view Sensing distance : 7mm Min. sensing target : Ø0.08mm Allowable bend radius : R1 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -30 to 70℃ Type Flat type/Flat view Sensing distance 7mm Min. sensing target Ø0.08mm Allowable bend radius R1 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -30 to 70℃ Sensing type Convergent reflective type
$149.37
Autonics Autonics Fiber optic sensor, Convergent reflective type FLF-320-10
FLF-320-10 Type : Flat type/Flat view Sensing distance : 8mm Min. sensing target : Ø0.0125mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 60℃ Type Flat type/Flat view Sensing distance 8mm Min. sensing target Ø0.0125mm Allowable bend radius R25 Cable length 2m Environment_Ambient temperature -40 to 60℃ Sensing type Convergent reflective type ※The sensing distance is a standard for BF5 Series.※Free cut type's sensing distance can be shortened about max. 20% than the normal according to condition of the cable. [(FC-3) should be used for cutting fiber cable.]
$107.90
Autonics Autonics Fiber optic sensor, Convergent reflective type FLF-320-10A
FLF-320-10A Type : Flat type/Flat view Sensing distance : 100mm Min. sensing target : Ø0.08mm Allowable bend radius : R20 Cable length : 2m Adapter : Adapter Environment_Ambient temperature : -30 to 70℃ Type Flat type/Flat view Sensing distance 100mm Min. sensing target Ø0.08mm Allowable bend radius R20 Cable length 2m Free cut Free cut Adapter Adapter Environment_Ambient temperature -30 to 70℃ Sensing type Convergent reflective type
$118.85
Autonics Autonics Fiber optic sensor, Convergent reflective type FLF-320-10H
FLF-320-10H Type : Flat type/Flat view Sensing distance : 130mm Min. sensing target : Ø0.08mm Allowable bend radius : R25 Cable length : 2m Environment_Ambient temperature : -40 to 105℃ Type Flat type/Flat view Sensing distance 130mm Min. sensing target Ø0.08mm Allowable bend radius R25 Cable length 2m Free cut Free cut Environment_Ambient temperature -40 to 105℃ Sensing type Convergent reflective type
$198.43
