LOBSTER

LOBSTER Water Pump Pliers With Spring WP250S  • The handle automatically opens by spring force.• For piping work• For plumbing (tap water faucet, etc.)• The arched (round) teeth securely grip objects of any shape. This tool is especially powerful for the pipe and rod, as it can grip the larger sized objects than straight shapes.• The jaw opening width is adjustable in 8 steps at 5 mm intervals. The handle width is suitable for gripping all types of objects easily.• As a safety mechanism to prevent joint slippage during use, a powerful spring is incorporated.Use / Application• Tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications  Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-0646 WP250S 350g 257mm 10.0mm 36mm 0～46mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Water Pump Pliers With Screwdriver ANGUIRUS WP250ND  • For piping work• For plumbing (tap water faucet, etc.)• With a jaw opening width adjustable in 5 steps, this tool is suitable for plumbing. The 150-mm screwdriver can be attached to the grip with a higher torque than conventional screwdrivers, and is useful for removing rusted or hard-tightened screws. Special heat treatment is applied to special steel, which can serve as a prying bar.• ANGUIRUS is a registered trademark of LOBTEX Co., Ltd. Use / Application• For tightening and removing nuts and bolts• For tightening / removing screws with the screwdriver• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-0655 WP250ND 350g 252mm 10.0mm 36mm 0～47mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useBefore using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Be careful not to damage your hands or body with the screwdriver at the end of the handle.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Water Pump Pliers type WP250DNA  A machine screw removal function has been added to the ANGUIRUS with handy screwdriver.• Tightening and removing rusted screws, head-crushed screws and special screws• For piping work• For plumbing (tap water faucet, etc.)• Tightening and removing nuts and bolts• For tightening / removing screws with the screwdriver• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 The outside diameter of the pipe grabbed (A display) 215-5146 WP250DNA 360g 252mm 10mm 0~47mm This tool is useful for removing head-crushed screws, deformed screws, etc Round-shaped object (pipe, etc.) can be easily gripped A slotted screwdriver is provided at the end of the grip.  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Water Pump Pliers Extremely useful for piping work in cramped spaces.Owing to the efficient mechanism, this tool ensures smooth operation and high durability.Use / ApplicationThis tool excels at various plumbing jobs, as well as tightening and removing nuts and bolts; opening and closing stoppers and bottle lids; and for twisting, bending and pulling wire.Specifications  Product Code. Model No. weight size1 215-0628 2310P 380g 250mm 215-0637 2312P 600g 300mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Tri-grip plier type TG-200NA  • A machine screw removal function is added to the LOBSTER original pliers featuring three-point support (tri-grip).• A flat shaft nut is used for both sides. The flu has a special asymmetric shape.• Tightening and removing rusted screws, head-crushed screws and special screws• For piping work, etc.• Tightening and removing nuts and bolts• Cutting, twisting, bending and tensioning steel wires• Bending steel plates, etc.Specifications Product Code. Model No. weight size1 size2 size3 215-5155 TG200NA 250g 203mm 11mm 46.0mm This tool can vertically pry and remove rusted or deformed screws. Owing to the special shape for 3-point support, this tool can stably grip round objects (copper pipe, etc.).IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useBefore using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Be careful not to damage your hands or body with the screwdriver at the end of the handle.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER  Side-Cutting Pliers 2508  Specifications Product Code. Model No. weight size1 Remark 215-0558 2508 350g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

[LOBSTER] Side-Cutting PliersSpecifications Product Code. Model No. weight size1 Remark 215-0530 2506P 210g 150mm Cutting capacity ①Iron wire:φ2.0 ②Copper wire:φ2.4 ※① of a table is full length. 215-0549 2508P 365g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Screw Pliers "Neji-Anguirus NA175  • Tightening and removing rusted screws, head-crushed screws and special screws• Standard tools for removing machine screws.• It serves as pliers, too.Specifications Product Code. Model No. weight size1 size2 215-5173 NA175 150g 170mm 9mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not infect target objects unstably. Otherwise, the tool may slip, causing your fingers to be caught in the tool.During work, wear protective goggles.Do not use this tool as a substitute for a hammer.Do not apply impact to this tool by hitting it with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Popular and long-selling L-type Clamp BP Popular and long-selling L-type LOBSTER clamp• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materials Specifications Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-1025 BP3017 5100g 300mm 174mm 440mm φ45mm 20mm 39.4mm 215-1034 BP4017 5600g 400mm 174mm 540mm φ45mm 20mm 39.4mm 215-1043 BP6017 6600g 600mm 174mm 740mm φ45mm 20mm 39.4mm 215-1052 BP8017 7600g 800mm 174mm 940mm φ45mm 20mm 39.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this clamp as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this clamp by hitting it with a hammer, etc.Do not extend this clamp with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Popular and long-selling L-type Clamp BH Popular and long-selling L-type LOBSTER clamp• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materials Specifications Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-1070 BH2012 2400g 200mm 119mm 315mm φ38mm 15mm 29.4mm 215-1089 BH2512 2500g 250mm 119mm 365mm φ38mm 15mm 29.4mm 215-1098 BH3012 2600g 300mm 119mm 415mm φ38mm 15mm 29.4mm 215-1104 BH4012 2900g 400mm 119mm 515mm φ38mm 15mm 29.4mm 215-1113 BH6012 3500g 600mm 119mm 715mm φ38mm 15mm 29.4mm 215-1122 BH8012 4100g 800mm 119mm 915mm φ38mm 15mm 29.4mm 215-1131 BH10012 4700g 1000mm 119mm 1115mm φ38mm 15mm 29.4mm 215-1140 BH12012 5300g 1200mm 119mm 1315mm φ38mm 15mm 29.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this clamp as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this clamp by hitting it with a hammer, etc.Do not extend this clamp with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Popular and long-selling L-type Clamp Popular and long-selling L-type LOBSTER clamp• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materials Specifications Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-0956 BM1010 1000g 100mm 101mm 180mm φ32mm 10.4mm 21.4mm 215-0965 BM1510 1100g 150mm 101mm 230mm φ32mm 10.4mm 21.4mm 215-0974 BM2010 1200g 200mm 101mm 280mm φ32mm 10.4mm 21.4mm 215-0983 BM2512 1300g 250mm 121mm 330mm φ32mm 10.4mm 21.4mm 215-0992 BM3012 1400g 300mm 121mm 380mm φ32mm 10.4mm 21.4mm 215-7481 BM3512 1500g 350mm 121mm 430mm φ32mm 10.4mm 21.4mm 215-1016 BM4012 1600g 400mm 121mm 480mm φ32mm 10.4mm 21.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this clamp as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this clamp by hitting it with a hammer, etc.Do not extend this clamp with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER NEJIANGUIRUS, Vise Pliers Type VW-NA A screw removal function has been added to handy vise-grip pliers that can turn a screw while holding it.• For tightening and removing rusted screws, head-crushed screws and special screws• For clamping round objects (pipe, etc.).• For cutting steel wiresSpecifications Product Code. Model No. weight size1 size2 Jaw Capacity 215-5164 VW125NA 165g 144mm 8.0mm 28mm 215-5234 VW175NA 345g 188mm 8.8mm 40mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool as a sling gear.Do not use this clamp for connecting scaffolding.During work, wear protective goggles.When releasing or unlocking the handle, be careful not to pinch your hands with the unlock lever.Do not apply impact to this tool by hitting it with a hammer, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Multi type Mini Crimping tool AK-M2  2 in 1 crimping tool for non-insulated terminals / sleeves and insulated terminals / sleeves!· Compared with conventional model, about 40% less load at the handle portion (* 1) when tested by non-insulated terminals.(* 1) Before unlock ratchet mechanism· Excellent layout of jaws to avoid misuseIntegrated ratchet mechanism· Elastomer grips fit in your hand· Can temporarily hold terminals by single hand Product Code. Model No. (Product) weight size1 size2 Use range Remark 215-6181 AKM2 345g 218mm 66mm ①0.3・0.5・1.25・2　②1.25・2(㎜2) ①Insulated terminals/sleeves ②Non-insulated terminals   IMPORTANT SAFETY INSTRUCTIONS· Do not crimp or work nearby live wires.· Use this tool properly with compatible cable connectors (Terminals / Sleeves) and cables· To prevent crimping failure and to ensure crimping performance, the tool should be periodical (once or twice a year) inspected by Lobtex· Lubricate moving parts of tool once or twice a month. Otherwise, may cause crimping failure due to friction· The holes have no adequate strength. Do not use it as anti-dropping purpose.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Multi type Mini Crimping tool AK-M1  2 in 1 crimping tool for Non-insulated terminals/sleeves and for Closed end insulated connectors!・Compared with conventional model, about 20% less in load at the handle portion when tested by CE5・Excellent layout of jaws to avoid misuse (For Non-insulated terminals/sleeves on once side, and for Closed end on another side)・Integrated ratchet mechanism・Elastomer grips fit in your hand・Can temporarily hold terminals by single hand Product Code. Model No. (Product) weight size1 size2 Use range Remark 215-6109 AKM1 325g 214mm 66mm ①CE1・CE2・CE5　②1.25・2(㎜2） ①Closed end insulated connectors, ②Non-insulated terminals/sleeves   IMPORTANT SAFETY INSTRUCTIONS· Do not crimp or work nearby live wires.· Use this tool properly with compatible cable connectors (Terminals / Sleeves) and cables· To prevent crimping failure and to ensure crimping performance, the tool should be periodical (once or twice a year) inspected by Lobtex· Lubricate moving parts of tool once or twice a month. Otherwise, may cause crimping failure due to friction· The holes have no adequate strength. Do not use it as anti-dropping purpose.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Modular Crimping Tool MK-86  Suitable for LAN / telephone indoor wiring.Enables cable cutting, stripping and crimping with a single tool.With a ratchet mechanism, this tool ensures simple and secure crimping work.· This tool is easy to use, because all types of work can be done from the front side.Use / Application· Applicable to modular plugs 8P8C (RJ45), 6P6C / 4C / 2C (RJ11 / RJ12).A safety cover is provided for the cutting area.· This tool is equipped with a round cable stripping guide (applicable outer diameter: φ5 to 5.5).· When the ratchet is released, both right and left arm are separated, making it easy to insert cables into the cutting area. Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-7834 MK86 345g 205mm 65mm modular plugs 8P8C(RJ45)、6P6C・6P4C・6P2C(RJ11・RJ12)   IMPORTANT SAFETY INSTRUCTIONS· Spare blades (for cutting and stripping) are sold separately.Do not use modular plugs or cables.· This tool may not be applicable to the original extension plugs or the like.· Apply oil to sliding parts of the tool about once or twice a month. If this tool is used without sufficient oil, the shaft will wear down remarkably, causing crimping failure.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Mini WIre Cutter MC210N  Specifications Product Code. Model No. weight size1 215-0673 MC210N 310g 210mm IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Long-Nose Pliers 2606  Specifications Product Code. Model No. weight size1 Remark 215-0521 2606 130g 150mm Cutting capacity ①Iron wire:φ1.6 ②Copper wire:φ2.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER L-type Clamp For Wood Work  • The grip handle is easy and efficient tightening work.• Special heat treatment has given the body appropriate elasticity. Proven high durability.• The plate is large and allows tightening work at angles up to 20 °.Use / Application• For attaching, fastening and holding materialsSpecifications  Product Code. Model No. (Product) weight size1 size2 size3 size4 size5 size6 215-0947 WM3012 1400g 300mm 121mm 380mm φ32mm 10.4mm 21.4mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool as a sling gear.Do not use this clamp for connecting scaffolding.Ensure secure tightening.Do not apply impact to this tool by hitting it with a hammer, etc.Do not extend this tool with a pipe, etc.When tightening a tapered or inclined workpiece, use particular caution. Slipping may occur.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic puncher • Hydraulic puncher• Enables smooth punching work in 18 steps ( 17.5 mm to  115.5 mm). Applicable to thin plate and soft steel plate of 3.2 mm thickness (stainless steel thickness 1.6 mm) after replacing the punch die.• Light 2.6 kg body and 20 kgf handle load enable easy punching work.Use / Application• Construction work (Electricity, tap water, gas, etc.)• Piping workSheet metal work and power distribution panels• Punching holes for mounting parts in control panelsSpecifications Product Code Model No. weight Set details 215-0266 LP104BP 7400g H150P、SP104、PSL、PSS、PSPL、PSPS、B16、B22、B28、B36、B42、B54 215-0275 PSS 150g A15～A25、B16 215-0284 PSL 270g A31～A75、B22～B104   Shaft for LOBSTER puncherIMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not operate the handle while touching the punch dies.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic Crimping Tool AKH60N • Lightweight compact type (Overall length: 360 mm, Weight: 2 kg)• Equipped with auxiliary lever, enabling easy and quick crimping with one handUse / Application• Quick crimping, applicable to up to 60 sq.Specifications Product Code. Model No. weight size1 Use range 215-0202 AKH60N 2000g 360mm 14、22、38、60㎜2 215-4855 AKH60N Dies 14~38 SQ 215-4864 AKH60N Dies 60 SQ IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hydraulic Crimping Tool AKH150S • Terminals can be held and crimped quickly in 1 or 2 squeezes of the handle. Return speed is only 3 seconds.Use / Application• Equipped with fast feed mechanismSpecifications  Product Code. Model No. weight size1 Use range 215-0211 AKH-150S(14-150SQ), 4300g 500mm 14、22、38、60、70、80、100、150㎜2 215-0220  Dies  AKH-150(14SQ), 215-0239  Dies  AKH-150(22SQ), 215-0248  Dies  AKH-150(38/60/70SQ), 215-0257  Dies  AKH-150(80/100/150SQ), IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hybrid Water Pump pliers UU4150  • The jaw opening varies in 6 steps at irregular pitches that accommodate pipe standards. The handle opening stays the same for the most part, regardless of the target workpiece size.• Owing to the 3-point support structure and deformed tooth profile, this tool can securely work with the grip.• Safety design (with stopper) to prevent hands being caught in the handle.• Applicable to nuts up to 41 mm in width across flats (M27), up to 50 mm pipe / round rod, and 3/8 stud bolts.• Lightweight design: Only 280 g (approx. 30 g weight reduction in comparison with our conventional models)• New profile that does not cause damage to the head of nuts.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 size4 size5 Bolt, nut maximum dimension 215-0664 UU4150 280g 226mm 9.0mm 43mm 52mm 50mm M27 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Handheld Diamond Dresser SHD001  · Handheld dresser used for dressing, edge making and truing of grinding wheels of double-sided grinders· Dressing is enabled with little force.· Since the hand dresser emits little sparks and noise, the work environment can be improved.Use / Application* How to use the toolWith the type of parallel to the grinding wheel surface, slide it laterally.(Do not press the tip against the grinding wheel. Doing so will cause the tip and grinding wheel to wear down early, and also a hazard. 38 or larger in width) or a grinding wheel with high grain density accelerates wear in the tip.Specifications Product Code. Model No. weight size1 size2 size3 size4 size5 215-0363 SHD001 245g 250mm 34mm 22.0mm 7.0mm 4.5mm IMPORTANT SAFETY INSTRUCTIONS◆ Precaution for useBefore using this product, be sure to read the instruction manual included with the product, instructions indicated on the case and the operation manual for the machine being used, to understand the contents thoroughly.During work, be sure to wear protective gear (dust-proof goggles, safety shoes and protective caps).CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR300 · It is an economic home-use hand.Use / ApplicationUse range: NSA (Rivet: Alminium, Mandrel: steel) 2.4, 3.2, 4.0, 4.8 mm  NA (Rivet: Alminium, Mandrel: Alminium)? 2.4, 3.2, 4.0, 4.8 mm  NS (Rivet: Steel, Mandrel: Steel) φ2.4, 3.2mmSpecifications Product Code. Model No. weight size1 size2 size3 size4 Remark 215-0734 HR300 600g 260mm 85mm 40mm 18mm Use range:NSA φ2.4,3.2,4.0,4.8mm IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR2050H  Longer handles and gear mechanism exert greater rivet break power· Φ4.8,6.4mm blind rivets in all materials can be used.* With the included S-bolt nosepiece, S-bolt can be set.Specifications Product Code. Model No. weight size1 size2 size3 size4 Usage jaws Remark 215-0770 HR2050H 1.750g 535mm 37mm 33mm 24mm Large ･Heavy Duty ･Use Range:φ4.8,6.4mm ※Can be used with φ2.4,3.2,4.0mm blind rivets if optional parts(separately sold)are attached  IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR003B  · Longer handles and gear mechanism exert greater rivet break power.* With optional parts (sold separately), HR-003B can set S-bolt.Specifications Product Code. Model No. weight size1 size2 size3 size4 Use range Usage jaws Remark 215-0761 HR003B 2.000g 760mm 95mm 41mm 25mm φ4.8・6.4mm Large Heavy Duty IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Riveter HR002A  · It is a hand Riveter with general configuration.• Aluminum die cast frame and drop-forged chrome-vanadium steel lever handle• Wide, self-opening spring for regriping• Automatic mandrel ejection• Comes with four nosepieces to set rivets up to 3/16 "• International designSpecifications Product Code. Model No. weight size1 Set details Use range Usage jaws 215-0734 HR002A 550g 265mm ※Cannot be used with φ4.8mm stainless steel blind rivets. φ2.4・3.2・4.0・4.8mm Small IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hand Nut Rivet Setter HN010 It is powerful hand nutter which can be used for the blind-nut with M10 size.Use / Application· 8 M ~ 10 M of blind-nuts,Specifications Product Code. Model No.  weight size1 size2 size3 size4 Use range 215-0798 HN010 1960ｇ 455mm 35mm 60mm 30mm M5、M6、M8、M10 IMPORTANT SAFETY INSTRUCTIONS◆ Important Safty Instruction· Be sure to read the instruction Manual and important Usage Advisory carefully and make sure that you understand them thoroughly before using this tool.· Be sure to use under condition of construction.· At the time of the attention and the activity in case of application, wear an eye protector.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip Internal Retaining Ring Pliers (Straight Nose) Non-slip!Improved work efficiency!Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. weight size1 215-5386 CS125 90g 152mm 215-0831 CS175 150g 178mm 215-5429 CS230 240g 240mm  IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip Internal Retaining Ring Pliers  (Bent Nose) Non-slip!Improved work efficiency!Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. (Product) weight size1 215-5395 CB125 90g 142mm 215-0840 CB175 150g 168mm 215-5438 CB230 240g 228mm   IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip External Retaining Ring Pliers  (Bent Nose) Non-slip!Improved work efficiency!Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. (Product) weight size1 215-5377 OB125 90g  137mm 215-0822 OB175 170g 163mm 215-5410 OB230 270g 230mm   IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Fixed-Tip  External Retaining Ring Pliers (Straight Nose) Non-slip!Improved work efficiency!· Piano wire is used for the tips. Heavy duty and high abrasion resistance!· Reverse tapered for Nose portion and Non-slip surface on the tips.· Rings are held securely to the tiered nose portion. Workability and safety improvement.Specifications Product Code. Model No. weight size1 215-5368 OS125 90g 145mm 215-0813 OS175 170g 174mm 215-5401 OS230 270g 242mm IMPORTANT SAFETY INSTRUCTIONSSnap rings may bounce off. Before work, make sure safety in your surroundings.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK6 For insulated crimp terminals, open barrel terminals ● One tool for crimping insulated crimp terminals and open barrel terminals, and bolt / cable cutting and stripping• Wire cutter• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No.  weight size1 215-0169 FK6 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK5 For open barrel terminals ● One tool for crimping open barrel terminal and bolt / cable cutting and stripping• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0150 FK5 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※Specifications may be changed for improvement without prior notice..

Read more less

Electric equipment crimping tool FK4 For insulated crimp terminals ● One tool for crimping insulated crimp terminals and bolt / cable cutting and stripping• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0141 FK4 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK3 For non-insulated terminals and P.B sleeves ● One tool for crimping non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping.• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0132 FK3 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK2 Insulated crimp terminals, non-insulated terminals and P.B sleeves ● One tool for crimping insulated crimp terminals / non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping• Wire cutterInsulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0123 FK2 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring. CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK1 For open barrel terminals, for non-insulated terminals and sleeves ● One tool for crimping open barrel terminals / non-insulated terminals, and bolt / cable cutting and stripping• Wire cutter• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0114 FK1 275g 235mm ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK38A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.For non-insulated sleeves (P-B) for copper wire.Specifications  Product Code. Model No. weight size1 size2 Use range 215-0080 AK38A 670g 335mm 82mm 14、22、38㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK25A • AK28A For closed end insulated connectors • Smooth handle operation• Forming check mechanism incorporated in the body. Smart collar design.• Handle is narrower than conventional models. (Approx. 200 mm when opened.) Handle is easily operated with one hand while holding the terminal with the other.Use / ApplicationFor closed end insulated connectorsSpecifications Product Code. Model No.  weight size1 size2 Use range 215-0053 AK25A 415g 266mm 82mm CE1、2、5 215-4484 AK28A 425g 269mm 82mm CE1、2、5、8 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※  Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK22A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.•For non-insulated sleeves (P-B) for copper wire.Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-4527 AK22A 675g 336mm 82mm 5.5、8、14、22㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Crimping Side-Cutting Pliers CSC225  Specifications Product Code. Model No. weight size1 Remark 215-0576 CSC225 365g 365mm Cutting capacity ①Iron wire:φ3.6 ②Copper wire:φ4.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum nippers APN20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Retail/User prices Remark 215-0682 APN20A 170g 215mm 38mm open price Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 2.0 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less than 980N IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Cutter with Stainless Steel Cutting Blade APS20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No. (Product) weight size1 size2 Remark 215-0691 APS20A 160g 215mm 38mm Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 1.6 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less   IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Cutter APC20A  Redesigned!Lightweight with aluminum handle!  (40% lighter compared with steel handle in the same)· Easy to cut with open wide cutting edge· Selectable 2 holes for anti-drop hook· Easy to grip owing to the left-right unsymmetrical grip· Luminous flu can help your work in the dark placeSpecifications Product Code. Model No.  weight size1 size2 Remark 215-0691 APC20A 160g 215mm 38mm Cutting capacityФ(mm): ①Soft material 4.0, ②Soft steel 4.0, ③Hard steel 2.0 ①Soft material: Copper pipe and electric wire ②Soft steel: Steel which less than 80HRB in hardness, less than 490N/mm2 in tensile strength ③Hard steel: Steel which less than 31HRC in hardness, less than   IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Compact Aluminum Clippers APK28  Lightweight clippers with a maximum cutting diameter of 12 mm (for soft material), 5 mm (for soft steel) or 3 mm (for hard steel)• The handle and clip plate are made of anodized aluminum alloy.• The grip is made of luminous material that stores fluorescent or sunlight and glows in the dark. A reflective sticker is attached to the handle.• The luminous grip is soft and gently fits the hand.Use / Application• For cutting wires, nails, fences, stainless steel strands, etc.• For disassembling scaffolding and binding materials at construction sites• For pruning, landscape gardening, etc.• For cutting soft materials (wire, copper pipe, plastic, etc.) in electrical work, disassembly work, etc.Specifications Product Code. Model No. (Product) weight size1 size2 215-0716 APK28 260g 280mm 46mm  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Combination Pliers LOBSTER pliers feature a proud history that dates back to 1928 as the first pliers made in Japan. The excellent quality is highly rated and trusted.Use / Application• Tightening and removing nuts and bolts• Cutting, twisting, bending and tensioning wires• Bending thin steel plates• Gripping objects that can not gripped by handSpecifications  Product Code. Model No. weight size1 size2 size3 215-7463 P200 250g 203mm 11mm 46.0mm 215-7472 P250 360g 248mm 12mm 58.0mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not infect target objects unstably. Otherwise, the tool may slip, causing your fingers to be caught in the tool.During work, wear protective goggles.Do not use this tool as a substitute for a hammer.Do not apply impact to this tool by hitting it with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Cable Stripper • This tool can easily strip a cable without damage, by simply turning the hook on the cable.• Special resin grip is ergonomically shaped to fit the hand, and prevent fatigue during work.• Precision ground cutter blade is made of special hard steel wire that maintains cutting performance for a long time.A spare cutter blade is included.Use / Application• Stripping cable sheathSpecifications  Product Code. Model No. weight size1 Use range 215-0318 CS16 75g 128mm φ4～16mm 215-0327 CS28 75g 132mm φ8～28mm 215-0336 CS35 85g 153mm φ28～35mm 215-0345 CS50 90g 166mm φ35～50mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less