Test Instruments & Gauges

Peacock One Revolution Dial Gauges; 0.001mm, 5Z-XB, Range 0.14mm Model 5Z-XB  Graduation 0.001mm  Range 0.14mm  Contact Point ( XB-1 ) Flat back These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 5Z-XB 0.001 0.14(3.0) 70-0-70 2.5 ±3 ±4 - - 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 5Z-XB 69.4 41.5 30 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm , Range 1.0mm, 117Z Model 117Z  Graduation 0.01mm  Range 1.0mm  Contact Point ( XB-1 ) Flat back   These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 117Z 0.01 1.0(7.0) 50-0-50 8 ±9 ±10 - - 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 117Z 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm , Range 0.8mm, Oil-proof type, 17Z-SWA Model 17Z-SWA  Graduation 0.01mm  Range 0.8mm  Contact Point ( XB-2A ) Oil-proof type Flat back   These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 17Z-SWA 0.01 0.8(7.0) 40-0-40 8 ±9 ±10 - - 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 17Z-SWA 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm , Range 0.8mm 17Z Model 17Z  Graduation 0.01mm  Range 0.8mm  Contact Point ( XB-1 ) Flat back These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 17Z 0.01 0.8(7.0) 40-0-40 8 ±9 ±10 - - 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 17Z 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm, 47SZ, Range 0.8mm,Small dial face ( Ø36 ) Model 47SZ  Graduation 0.01mm  Range 0.8mm  Small dial face ( Ø36 ) Flat back Contact Point ( XB-1 ) These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-freedue to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange(dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 47SZ 0.01 0.8(4.0) 40-0-40 9 - ±13 -   6 5 1.4   Dimensions (mm) Model A B C D E F G H I K 47SZ 41.1 20 9.7 36 13 15 3.5 6.5 32 23.1  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm, 47Z-XB, Range 0.8mm Model 47Z-XB  Graduation 0.01mm  Range 0.8mm  Long stem Flat back Contact Point ( XB-1 ) These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-freedue to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange(dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 47Z-XB 0.01 0.8(4.0) 40-0-40 9 - ±13 -   6 5 1.4   Dimensions (mm) Model A B C D E F G H I K 47Z-XB 61.9 20 30 36 13 15 4 5.8 32 43.9  

Read more less

Peacock Miniature Dial Gauges; 0.01mm, 36B , Range 3mm Model 36B Graduation 0.01mm  Range 3mm  Contact point ( X-107 ) Lug back Dial dia. Ø40.8mm These compact size dial gauges are equipped with small dial faces. They are especially useful for measuring jigs, in restricted areas. Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 36B 0.01 3 0-25-50 9 - ±13 - ±15 6 5 1.4   Dimensions (mm) Model A B C D E F G H I 36B 46.2 30.5 12.9 40.8 12.5 19 4 5.1 37  

Read more less

Peacock Miniature Dial Gauges; 0.005mm, 36A , Range 3mm Model 36A  Graduation 0.005mm  Range 3mm  Contact point ( X-107 ) Lug back Dial dia. Ø40.8mm These compact size dial gauges are equipped with small dial faces. They are especially useful for measuring jigs, in restricted areas. Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 36A 0.005 3 ±0-25-50 9 - ±13 - ±15 6 5 1.4   Dimensions (mm) Model A B C D E F G H I 36A 46.2 30.5 12.9 40.8 12.5 19 4 5.1 37  

Read more less

Peacock Miniature Dial Gauges; 0.01mm, 47 , Range 4mm Model 47  Graduation 0.01mm  Range 4mm  Contact point ( X-107 ) Lug back Dial dia. Ø36mm These compact size dial gauges are equipped with small dial faces. They are especially useful for measuring jigs, in restricted areas. Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 47 0.01 4 0-50-0 9 - ±13 - ±15 6 5 1.4   Dimensions (mm) Model A B C D E F G H I 47 39.6 20 9.7 36 13 15 3.5 6.5 32  

Read more less

Peacock Standard Dial Gauges; 0.01mm, 107-HG  High Precision Type, Range 10mm Model 107-HG High Precision Type  Graduation 0.01mm  Range 10mm  Indication error ±10µm Retrace error 4µm Includes accuracy certification Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 107-HG 0.01 10 ±0-50-100 6 ±7 ±8 ±10 ±10 4 5 1.4   Dimensions (mm) Model A B C D E F G H I 107-HG 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.001mm, 5B-HG  High Precision Type Model 5B-HG High Precision Type  Graduation 0.001mm  Range 1mm  Indication error ±3µm Retrace error 2µm Includes accuracy certification Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 5B-HG 0.001 1 0-100-0 2 ±2 ±3 ±3 ±3 2 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 5B-HG 60 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock Long Travel Dial Gauges; 0.01mm, 207S ,Range 20mm,Small dial face type ( Ø53mm ) Model 207S  Graduation 0.01mm  Range 20mm  Small dial face type ( Ø53mm ) Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 207S 0.01 20 ±0-50-100 10 - ±15 - ±20 7 5 2.0   Dimensions (mm) Model A B C D E F G H I 207S 75 50.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock Long Travel Dial Gauges; 0.01mm, 207S-LL , Spindle lifting lever ,Range 20mm Model 207S-LL  Graduation 0.01mm  Range 20mm  Spindle lifting lever ( LL-1 ) Small dial face type ( Ø53mm ) Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 207S-LL 0.01 20 ±0-50-100 10 - ±15 - ±20 7 5 2.0   Dimensions (mm) Model A B C D E F G H I 207S-LL 75 50.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.001mm,  55 ,Range 5mm Model 55  Graduation 0.001mm  Range 5mm  Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 55 0.001 5 0 -100-0 5 ±6 ±7 ±8 ±10 4 1 1.5   Dimensions (mm) Model A B C D E F G H I 55 73 52 25 66 17 20 4.5 7 62.5  

Read more less

Niigata Seiki (SK) Fiber folding scale Smooth scale 1m PFR-100CKD   Feature It is foldable and convenient to carry. Comes with a lock function that clicks at 90 ° and 180 °. The scale is a hot stamp that is more resistant to rubbing than printing. specification Measuring range (mm): 0-1000 Dimensional accuracy (mm): ± 1.5 Number of folds (folds): 5 Scale pitch (mm): Upper and lower steps 1 Package size: 55 x 17 x 285 mm

Read more less

Niigata Seiki (SK) tape measure that can be pasted PM-1320KD   Feature Abrasion resistant nylon coated tape With temporary fixing hole (2 mm) that can be temporarily fixed with nails, etc. With ready-to-use backside adhesive tape specification Material: SK material (nylon coating), maximum measurement length 2.0m, tape width 13mm, tape thickness * 0.3mm * including adhesive tape For dimensional measurement by pasting on a workbench Body mass: 32g Can be used by cutting with adhesive tape on the back Package size: 135 x 90 x 20 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-10-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.1 Plate thickness tolerance (t) (mm): ± 0.01 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-05-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.05 Plate thickness tolerance (t) (mm): ± 0.003 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-04-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.04 Plate thickness tolerance (t) (mm): ± 0.003 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-03-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.03 Plate thickness tolerance (t) (mm): ± 0.003 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　40 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-02-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.02 Plate thickness tolerance (t) (mm): ± 0.002 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　30 g

Read more less

Niigata Seiki (SK) Feeler Gauge Wide SFG30-01-1   Feature You can cut it to any length to suit your needs. Comes in a paper case for convenient storage. Made of stainless steel that does not rust easily. Essentials for assembly and adjustment! A wide type has appeared in the filler gauge. specification Material: Stainless steel (SUS304) [RoHS compliant product] -Brass (made-to-order product) Leaf width (W) (mm): 30 Plate thickness (t) (mm): 0.01 Plate thickness tolerance (t) (mm): ± 0.002 Gap sizing and inspection Gap adjustment Package size: 88 x 40 x 80 mm 　30 g

Read more less

Niigata Seiki (SK) Inside Protractor IP-90   Feature The internal angle can be easily measured and the angle can be seen at a glance. A matte silver finish is used on the surface to make the scale easier to read. Robust, light and convenient to carry (with plastic case) Measure the angle of the internal angle in one shot! You can see the measured value at a glance. specification Scale: 1 ° Angle measurement range: 10 to 90 ° Instrumental error: ± 0.5 ° Internal angle angle measurement Body mass: 43g Package size: 141 x 36 x 105 mm 　130 g

Read more less

Niigata Seiki (SK) Crack measure Clear with smooth scale CM-CKD   Feature It can be used to check for cracks on walls and foundations. You can measure the width and length with one sheet. Made of transparent, easy-to-measure, soft and easy-to-use polyester. It's the size of a business card, so it's convenient to carry. Comes with a measurement seal that can be selected according to the application. specification Crack measurement range: 0.03 to 1.5 mm Length measurement range: 80mm Measurement seal type: Diameter measurement, grid measurement, angle measurement Package size: 60 x 2 x 150 mm 

Read more less

Niigata Seiki (SK) Chamfer measurement gauge CMG-10   Feature For measuring the outer circumference chamfer of workpieces in lathes, single-purpose lathes, and turret lathes. For hole chamfer measurement of workpieces in milling machines and drilling machines. You can easily measure and inspect the size of the machined surface! specification Measuring range: 0 to 15C Minimum reading: 0.5 mm Material: Stainless steel (SUS420J2) Measuring the surface size of the work piece Body mass: 20g Body length: 71.6mm Body width: 16mm Body thickness: 2mm Package size: 50 x 7 x 106 mm 　20 g

Read more less

Niigata Seiki (SK) Molding gauge CG-100S   Feature The gauge needle is thin and it is easy to take a smooth curve. You can transfer complex shapes! specification Effective length: 150mm You can make various curved surfaces for molding curved parts. Body mass: 210g Body length: 155mm Body width: 84mm Package size: 130 x 20 x 210 mm 　250 g

Read more less

Niigata Seiki (SK) Angle Protractor AP-130   Features It is possible to measure the angle of members before and after welding in a wide range. Direct measurement is possible without interfering with the swelling after pressure welding and the build-up after welding. It also supports inside and outside angle measurement such as sheet metal bending. The surface has a silver finish. Use Bending angle measurement of pressure welding part and butt joint Bending measurement of flanges and sheet metal Weld joint angle measurement, plate scissors angle measurement Product specifications Specifications / standards Angle of joint part Inclination measurement after stud: 0-180 ° Total length of rod (mm): 90 Overall length (mm): 105 Rod thickness (mm): 1.5 Groove (bevel) angle: Scissors angle 30-130 ° (minimum reading 1 °) Material Stainless steel (SUS410) Mass / mass unit 100g

Read more less

Niigata Seiki (SK) Angle groove gauge WGA-65 Feature By sharpening the tip, it is possible to measure thin plates with a root gap of 0 mm and 15 mm or less. Direct measurement of the groove angle of the welded joint is possible with this one. At the same time, it is possible to measure the angle of the T joint without overlaying. Large scale that is easy to use in the field. The minimum scale corresponds to 0.5 °. A matte silver finish is used on the surface to make the scale easier to read. Robust, light and convenient to carry (with plastic case) A product specializing in angle measurement! The groove angle can be measured with a minimum reading of 0.5 °, which corresponds to various standard tolerances. specification Material: Stainless steel (SUS410) Groove (bevel) angle: 25-65 ° (minimum reading: 0.5 °) Angle of the joint Inclination after stud welding: 70-110 ° Angle measurement accuracy: ± 0.5 ° Groove angle measurement of butt joint, angle measurement of weld joint Body mass: 74g Body length: 117.5mm Package size: 141 x 36 x 105 mm 　170 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 1.00x1m FG-00-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 1.00 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.02 Gap measurement Body mass: 110g Package size: 1040 x 32 x 1 mm 　100 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.90x1m FG-90-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.90 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.02 Gap measurement Body mass: 100g Package size: 1040 x 32 x 1 mm 　90 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.80x1m FG-80-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.80 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.70x1m FG-70-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.70 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.60x1m FG-60-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.60 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.50x1m FG-50-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.50 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 140g Package size: 115 x 115 x 22 mm 　140 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.45x1m FG-45-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.45 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 120g Package size: 115 x 115 x 22 mm 　130 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.40x1m FG-40-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.40 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.012 Case size (mm): 115 x 115 x 22 Gap measurement Body mass: 120g Package size: 115 x 115 x 22 mm 　130 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.35x1m FG-35-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.35 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.30x1m FG-30-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.30 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.25x1m FG-25-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.25 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.20x1m FG-20-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.20 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.15x1m FG-15-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.15 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.14x1m FG-14-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.14 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.13x1m FG-13-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.13 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.12x1m FG-12-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. Essentials for assembly and adjustment! You can cut and use only the required size. specification Size (mm): 0.12 x 1m Leaf width 12.7mm Material: Carbon tool steel (hardened) Instrumental error: (mm): ± 0.01 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　50 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.11mmx1m SFG-11-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.11 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.006 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.10mmx1m SFG-10-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.10 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.006 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 50g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.09mmx1m SFG-09-1 Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.09 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less

Niigata Seiki (SK) SUS Feeler Gauge 0.07mmx1m SFG-07-1   Feature Used for assembling and adjusting automobile engines and other internal combustion engines. Cut to the required dimensions and use. specification Size (mm): 0.07 x 1m Leaf width 12.7mm Material: Stainless steel Instrumental error: (mm): ± 0.005 Case size (mm): 77 x 77 x 22 Gap measurement Body mass: 40g Package size: 77 x 77 x 22 mm 　40 g

Read more less