Pliers & Cutters

LOBSTER Mini WIre Cutter MC210N  Specifications Product Code. Model No. weight size1 215-0673 MC210N 310g 210mm IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Water Pump Pliers type WP250DNA  A machine screw removal function has been added to the ANGUIRUS with handy screwdriver.• Tightening and removing rusted screws, head-crushed screws and special screws• For piping work• For plumbing (tap water faucet, etc.)• Tightening and removing nuts and bolts• For tightening / removing screws with the screwdriver• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 The outside diameter of the pipe grabbed (A display) 215-5146 WP250DNA 360g 252mm 10mm 0~47mm This tool is useful for removing head-crushed screws, deformed screws, etc Round-shaped object (pipe, etc.) can be easily gripped A slotted screwdriver is provided at the end of the grip.  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Hybrid Water Pump pliers UU4150  • The jaw opening varies in 6 steps at irregular pitches that accommodate pipe standards. The handle opening stays the same for the most part, regardless of the target workpiece size.• Owing to the 3-point support structure and deformed tooth profile, this tool can securely work with the grip.• Safety design (with stopper) to prevent hands being caught in the handle.• Applicable to nuts up to 41 mm in width across flats (M27), up to 50 mm pipe / round rod, and 3/8 stud bolts.• Lightweight design: Only 280 g (approx. 30 g weight reduction in comparison with our conventional models)• New profile that does not cause damage to the head of nuts.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 size4 size5 Bolt, nut maximum dimension 215-0664 UU4150 280g 226mm 9.0mm 43mm 52mm 50mm M27 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Water Pump Pliers With Screwdriver ANGUIRUS WP250ND  • For piping work• For plumbing (tap water faucet, etc.)• With a jaw opening width adjustable in 5 steps, this tool is suitable for plumbing. The 150-mm screwdriver can be attached to the grip with a higher torque than conventional screwdrivers, and is useful for removing rusted or hard-tightened screws. Special heat treatment is applied to special steel, which can serve as a prying bar.• ANGUIRUS is a registered trademark of LOBTEX Co., Ltd. Use / Application• For tightening and removing nuts and bolts• For tightening / removing screws with the screwdriver• For twisting, bending and tensioning wiresSpecifications Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-0655 WP250ND 350g 252mm 10.0mm 36mm 0～47mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useBefore using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Be careful not to damage your hands or body with the screwdriver at the end of the handle.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Water Pump Pliers With Spring WP250S  • The handle automatically opens by spring force.• For piping work• For plumbing (tap water faucet, etc.)• The arched (round) teeth securely grip objects of any shape. This tool is especially powerful for the pipe and rod, as it can grip the larger sized objects than straight shapes.• The jaw opening width is adjustable in 8 steps at 5 mm intervals. The handle width is suitable for gripping all types of objects easily.• As a safety mechanism to prevent joint slippage during use, a powerful spring is incorporated.Use / Application• Tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications  Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-0646 WP250S 350g 257mm 10.0mm 36mm 0～46mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Water Pump Pliers WP200H  Extremely useful for piping work in cramped spaces.Owing to the efficient mechanism, this tool ensures smooth operation and high durability.Use / Application• For piping work• For plumbing (tap water faucet, etc.)• For tightening and removing nuts and bolts• For twisting, bending and tensioning wiresSpecifications  Product Code. Model No. weight size1 size2 size3 The outside diameter of the pipe grabbed (A display) 215-6118 WP200H 200g 196mm 8.0mm 26mm 0～33mm  IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live parts. The grip is not insulated.Before using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values. ※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER brand welding pliers (For CO2 welding torches only) Worldwide requisite tool for CO2 welding!Eight functions are available with this single tool.· Enables sharp cutting of welding wire (including stainless steel).· Since induction hardening is applied to special steel, high cutting performance can be maintained.· Eliminates spatter that affects welding quality.· Can grip each parts of torchSpring mechanism improves work efficiency.Use / Application· Wire drawing (Long-nose pliers function)· Wire cutting (Applicable to both iron and stainless steel)· Eliminating spatter inside and outside of the nozzle· Eliminating spatter from nozzle tip· Hammer function for eliminating spatter· Nozzle attaching / detaching· Tip attaching / detaching· Insulation cylinder attaching / detaching【Functional description】 Specifications Product Code. Model No. weight size1 size2 size3 size4 size5 Remark 215-7825 ZP210WEL 275g 212mm 11mm 4mm 7mm 45mm Cutting capacity(welding wire, iron, stainless steel CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Tri-grip plier type TG-200NA  • A machine screw removal function is added to the LOBSTER original pliers featuring three-point support (tri-grip).• A flat shaft nut is used for both sides. The flu has a special asymmetric shape.• Tightening and removing rusted screws, head-crushed screws and special screws• For piping work, etc.• Tightening and removing nuts and bolts• Cutting, twisting, bending and tensioning steel wires• Bending steel plates, etc.Specifications Product Code. Model No. weight size1 size2 size3 215-5155 TG200NA 250g 203mm 11mm 46.0mm This tool can vertically pry and remove rusted or deformed screws. Owing to the special shape for 3-point support, this tool can stably grip round objects (copper pipe, etc.).IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useBefore using the pliers, make sure that the jaw opening width has been securely adjusted and set.Do not infect target objects unstably. Otherwise, the pliers may slip, causing your hands to be caught in the tool.Be careful not to damage your hands or body with the screwdriver at the end of the handle.Do not use this tool as a substitute for a hammer.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Screw Pliers "Neji-Anguirus NA175  • Tightening and removing rusted screws, head-crushed screws and special screws• Standard tools for removing machine screws.• It serves as pliers, too.Specifications Product Code. Model No. weight size1 size2 215-5173 NA175 150g 170mm 9mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not infect target objects unstably. Otherwise, the tool may slip, causing your fingers to be caught in the tool.During work, wear protective goggles.Do not use this tool as a substitute for a hammer.Do not apply impact to this tool by hitting it with a hammer, etc.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Crimping Side-Cutting Pliers CSC225  Specifications Product Code. Model No. weight size1 Remark 215-0576 CSC225 365g 365mm Cutting capacity ①Iron wire:φ3.6 ②Copper wire:φ4.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER  Side-Cutting Pliers 2508  Specifications Product Code. Model No. weight size1 Remark 215-0558 2508 350g 200mm Cutting capacity ①Iron wire:φ3.0 ②Copper wire:φ3.6 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Long-Nose Pliers 2606  Specifications Product Code. Model No. weight size1 Remark 215-0521 2606 130g 150mm Cutting capacity ①Iron wire:φ1.6 ②Copper wire:φ2.0 ※① of a table is full length. IMPORTANT SAFETY INSTRUCTIONS◆ Attention on useDo not use this tool on live parts. The grip is not insulated.Before cutting work, confirm the direction in which chips scatter.During work, wear protective goggles.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK6 For insulated crimp terminals, open barrel terminals ● One tool for crimping insulated crimp terminals and open barrel terminals, and bolt / cable cutting and stripping• Wire cutter• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No.  weight size1 215-0169 FK6 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK5 For open barrel terminals ● One tool for crimping open barrel terminal and bolt / cable cutting and stripping• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0150 FK5 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※Specifications may be changed for improvement without prior notice..

Read more less

Electric equipment crimping tool FK4 For insulated crimp terminals ● One tool for crimping insulated crimp terminals and bolt / cable cutting and stripping• Insulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0141 FK4 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK3 For non-insulated terminals and P.B sleeves ● One tool for crimping non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping.• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Wire cutter• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications  Product Code. Model No. weight size1 215-0132 FK3 220g 220mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK2 Insulated crimp terminals, non-insulated terminals and P.B sleeves ● One tool for crimping insulated crimp terminals / non-insulated terminals and P.B sleeves, and bolt / cable cutting and stripping• Wire cutterInsulated terminal crimp tooth opening (1.25, 2, 5.5 sq.)• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0123 FK2 275g 235mm IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring. CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Electric equipment crimping tool FK1 For open barrel terminals, for non-insulated terminals and sleeves ● One tool for crimping open barrel terminals / non-insulated terminals, and bolt / cable cutting and stripping• Wire cutter• Open barrel crimp tooth opening (Insertion terminal: 1.25, 2 mm2) * Use dies indicated with INS crimp the insulation area• Bolt cutter (Applicable sizes: M2.6 to M5)• Crimp tooth opening for non-insulated terminal and P.B sleeve (1.25, 2, 5.5 sq.)• Wire stripper (Applicable sizes: 0.75 to 5.5 sq.)Use / Application• For automobile maintenance• For telephone and telecommunication cable wiring• For factory maintenance• For household appliances (Audio equipment, TVs, etc.)• For various handcrafts and hobbiesSpecifications Product Code. Model No. weight size1 215-0114 FK1 275g 235mm ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Simple tools for automotive repairs and hobbies. Do not use this tool for crimping important parts such as indoor wiring.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Wire stripper LC55  • Enabling easy stripping of various sizes of vinyl cable by turning the adjuster screw (equipped with indicator).• Sharp cutter included.Use / Application• Cable unsheathingSpecifications Product Code. Model No.  weight size1 Use range 215-0293 LS55 220g 170mm 0.1～5.5㎜2 IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not use this tool on live wires. This may result in electric shock.Adjust the stripping cutter blade properly to prevent core wire break. Wire breaks may cause power supply failures and fire.CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK38A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.For non-insulated sleeves (P-B) for copper wire.Specifications  Product Code. Model No. weight size1 size2 Use range 215-0080 AK38A 670g 335mm 82mm 14、22、38㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

Crimping tool AK22A For non-insulated terminals for copper wire. For non-insulated sleeves for copper wire. • The handle is narrow and weighs less, enabling easy and secure crimping work via minimal handle operation.Use / Application• For non-insulated terminals for copper wire.•For non-insulated sleeves (P-B) for copper wire.Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-4527 AK22A 675g 336mm 82mm 5.5、8、14、22㎜2 ! IMPORTANT SAFETY INSTRUCTIONS◆ Precautions in useDo not crimp or work nearby live wires. This may result in electric shock.Use this tool properly with compatible cable connectors (terminals and sleeves) and cables.To prevent crimping failure, and to ensure crimping performance, the tool should be periodically inspected by Lobtex.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.※ Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Modular Crimping Tool MK-86  Suitable for LAN / telephone indoor wiring.Enables cable cutting, stripping and crimping with a single tool.With a ratchet mechanism, this tool ensures simple and secure crimping work.· This tool is easy to use, because all types of work can be done from the front side.Use / Application· Applicable to modular plugs 8P8C (RJ45), 6P6C / 4C / 2C (RJ11 / RJ12).A safety cover is provided for the cutting area.· This tool is equipped with a round cable stripping guide (applicable outer diameter: φ5 to 5.5).· When the ratchet is released, both right and left arm are separated, making it easy to insert cables into the cutting area. Specifications Product Code. Model No. (Product) weight size1 size2 Use range 215-7834 MK86 345g 205mm 65mm modular plugs 8P8C(RJ45)、6P6C・6P4C・6P2C(RJ11・RJ12)   IMPORTANT SAFETY INSTRUCTIONS· Spare blades (for cutting and stripping) are sold separately.Do not use modular plugs or cables.· This tool may not be applicable to the original extension plugs or the like.· Apply oil to sliding parts of the tool about once or twice a month. If this tool is used without sufficient oil, the shaft will wear down remarkably, causing crimping failure.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Multi type Mini Crimping tool AK-M2  2 in 1 crimping tool for non-insulated terminals / sleeves and insulated terminals / sleeves!· Compared with conventional model, about 40% less load at the handle portion (* 1) when tested by non-insulated terminals.(* 1) Before unlock ratchet mechanism· Excellent layout of jaws to avoid misuseIntegrated ratchet mechanism· Elastomer grips fit in your hand· Can temporarily hold terminals by single hand Product Code. Model No. (Product) weight size1 size2 Use range Remark 215-6181 AKM2 345g 218mm 66mm ①0.3・0.5・1.25・2　②1.25・2(㎜2) ①Insulated terminals/sleeves ②Non-insulated terminals   IMPORTANT SAFETY INSTRUCTIONS· Do not crimp or work nearby live wires.· Use this tool properly with compatible cable connectors (Terminals / Sleeves) and cables· To prevent crimping failure and to ensure crimping performance, the tool should be periodical (once or twice a year) inspected by Lobtex· Lubricate moving parts of tool once or twice a month. Otherwise, may cause crimping failure due to friction· The holes have no adequate strength. Do not use it as anti-dropping purpose.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

LOBSTER Multi type Mini Crimping tool AK-M1  2 in 1 crimping tool for Non-insulated terminals/sleeves and for Closed end insulated connectors!・Compared with conventional model, about 20% less in load at the handle portion when tested by CE5・Excellent layout of jaws to avoid misuse (For Non-insulated terminals/sleeves on once side, and for Closed end on another side)・Integrated ratchet mechanism・Elastomer grips fit in your hand・Can temporarily hold terminals by single hand Product Code. Model No. (Product) weight size1 size2 Use range Remark 215-6109 AKM1 325g 214mm 66mm ①CE1・CE2・CE5　②1.25・2(㎜2） ①Closed end insulated connectors, ②Non-insulated terminals/sleeves   IMPORTANT SAFETY INSTRUCTIONS· Do not crimp or work nearby live wires.· Use this tool properly with compatible cable connectors (Terminals / Sleeves) and cables· To prevent crimping failure and to ensure crimping performance, the tool should be periodical (once or twice a year) inspected by Lobtex· Lubricate moving parts of tool once or twice a month. Otherwise, may cause crimping failure due to friction· The holes have no adequate strength. Do not use it as anti-dropping purpose.! CAUTIONS ON INSCRIBED VALUES※ Since dimensions, weights, etc. are nominal, there are possibly some numerical values.  * Specifications may be changed for improvement without prior notice.

Read more less

Smato Slip joint pliers for cars only ◎ Slip joint pliers for cars only Product Code Model No. Size (") Length (mm) Weight (g) 113-0742 SM-CP08 8 204 140

Read more less

Smato Mini End-Cutting Pliers ◎ Mini End-Cutting Pliers with Cushion Grip  Product Code Model No. Size (") Length (mm) Wire cutting size (￠) Weight (g) 100-0469 SM-E04 4 100 1.25 70

Read more less

Smato Mini Round-Nose Pliers  ◎ Mini Round-Nose Pliers      Round Jaws and Cushion Grip Product Code Model No. Size (") Length (mm) Weight (g) 100-0496 SM-R04 4.5 124 50  

Read more less

Smato Mini Needle-Nose Pliers | Bent Jaws  ◎ Mini Needle-Nose Pliers | Bent Jaws and Cushion Grip. Product Code Model No. Size (") Length (mm) Weight (g) 100-0487 SM-BN04 5.5 149 70  

Read more less

Smato Mini Needle-Nose Pliers ◎ Mini Needle-Nose Pliers | Flat Jaws and Cushion Grip. Product Code Model No. Size (") Length (mm) Weight (g) 100-0478 SM-LN04 5.5 153 70  

Read more less

Smato Mini Long-Nose Pliers - 45º Bent Jaws  ◎  45º Bent Jaws and Cushion Grip Product Code Model No. Size (") Length (mm) Weight (g) 100-0441 SM-B04 4.5 115 70  

Read more less

Smato Mini Long-Nose Pliers - Flat Jaws  ◎ Flat Jaws and Cushion Grip Product Code Model No. Size (") Length (mm) Weight (g) 100-0432 SM-F04 4.5 130 70  

Read more less

Smato Double-Joint Wire Cutter ◎ Double-Joint and Cushion Grip Wire Cutter. Product Code Model No. Size (") Length (mm) 109-6855 SM-DDC12 12 306

Read more less

Smato Long-Nose Pliers - Flat-Nose and Double-Joint Handle  ◎ Long-Nose Pliers - Flat-Nose and Cushion Grip With Double-Joint Handle (100-0238) Product Code Model No. Size (") Length (mm) 100-0238 SM-DF330 13 330  

Read more less

Smato Long-Nose Pliers - 45º Bent-Nose and Double-Joint Handle  Long-Nose Pliers - 45º Bent-Nose and Cushion Grip With Double-Joint Handle (100-0229) Product Code Model No. Size (") Length (mm) 100-0229 SM-DB330 13 330

Read more less

Smato Long-Nose Pliers - Flat Jaws With Double-Joint Handle  ◎ Long-Nose Pliers - Flat Jaws and Cushion Grip With Double-Joint Handle  Product Code Model No. Size (") Length (mm) 100-0210 SM-DS330 13 330

Read more less

Smato Long-Nose Pliers - Round Tip and Double Joint Handle  ◎ Long-Nose Pliers - Round Tip and Double Joint Handle.     Cushion Grip   Product Code Model No. Size (") Length (mm) Round Tip Size(mm) 100-0201 SM-DR330 13 330 13  

Read more less

Smato Mini End Cutting Pliers  ◎ Cushion Grip Product Code Model No. Size (") Length (mm) Weight (g) 100-9789 SM-ME06 6 134 160  

Read more less

Smato Mini Wire Cutter ◎ Cushion Grip Product Code Model No. Size (") Length (mm) Weight (g) 100-9770 SM-MD06 6 141 160  

Read more less

Smato Mini Bent Nose Pliers  ◎ Bent Nose and Cushion Grip Product Code Model No. Size (") Length (mm) Weight (g) 100-9798 SM-MB06 6 152 160  

Read more less

Smato Mini Flat Nose Pliers ◎ Flat Jaws and Cushion Grip Product Code Model No. Size (") Length (mm) Weight (g) 100-9831 SM-MF06 6 155 160  

Read more less

Smato Multipurpose Pliers  Pliers with various functions-hammer- Nail drawing- Bolt assembly etc. Product Code Model No. Size (") Length (mm) Wire cutting size (￠) Weight (g) 100-0362 SM-FP10 10 260 2.31 660

Read more less

Smato Crimping and Cutting Pliers  Product Code Model No. Size (") Length (mm) 100-0292 SM-D09CR 9 1/2" 250

Read more less

Smato Water Pump Pliers-Flat Jaws and Plain Grip  ◎ Mounting screwdriver on handle   Product Code Model No. Size (") Length (mm) Maximum Jaw Size (mm) Weight (g) 101-0192 SM-WP10 10 250 38 590  

Read more less

Smato Power Side Cutting Pliers  Product Code Model No. Size (") Length (mm) Wire cutting size (￠) Weight (g) 100-0274 SM-P09 9 240 2.31 540   ◎ The part A is usually shorter than the pliers and has excellent cutting power.

Read more less

Smato High-grade Side Cutting pliers Product Code Model No. Size (") Length (mm) Wire cutting size (￠) Weight (g) 100-9804 SM-SC8 8 203 2.5 460

Read more less

Smato Multi-Purpose Long Nose Pliers  - Small screw action- disconnect the cord- Crimp- Remove wire cloth Product Code Model No. Size (") Length (mm) Wire cutting size (￠) Weight (g) 100-0122 SM-M06 6 160 1.6 220

Read more less