Autonics Photoelectric Sensors
Autonics Autonics Photoelectric Sensor, Photoelectric Type BTF30-DDTL-P
Sensing type Diffuse reflective type Sensing distance 5 to 30mm Sensing target Opaque, Translucent material(min. sensing target: Ø0.2mm) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 20mA Operation mode Light ON Control output PNP open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case: polybutylene terephthalate, sensing part: polymethyl methacrylate,bracket: SUS304(steel use stainless 304), bolt: carbon steel, sleeve: SUS304(steel use stainless 304) Accessories Fixing bracket, M2 bolt: 2 Weight Approx. 40g (approx. 25g)
$35.55
Autonics Autonics Photoelectric Sensor, Photoelectric Type BTS1M-TDTD
Sensing type Through-beam type Sensing distance 1m Sensing target Opaque material of min. Ø2mm Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Dark ON Control output NPN open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -20 to 55℃, storage: -30 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Polybutylene terephthalate, Sensing part: Polymethyl methacrylate, Bracket: Stainless steel 304,Bolt: Carbon steel wire for cold heading(SWCH10A) Weight Approx. 65g(approx. 40g)
$42.80
Autonics Autonics Photoelectric Sensor, Photoelectric Type BTF30-DDTL
Sensing type Diffuse reflective type Sensing distance 5 to 30mm Sensing target Opaque, Translucent material(min. sensing target: Ø0.2mm) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 20mA Operation mode Light ON Control output NPN open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case: polybutylene terephthalate, sensing part: polymethyl methacrylate,bracket: SUS304(steel use stainless 304), bolt: carbon steel, sleeve: SUS304(steel use stainless 304) Accessories Fixing bracket, M2 bolt: 2 Weight Approx. 40g (approx. 25g)
$35.55
Autonics Autonics Photoelectric Sensor, Photoelectric Type BTF1M-TDTL
Sensing type Through-beam type Sensing distance 1m Sensing target Opaque material of min. Ø2mm Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Light ON Control output NPN open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: polybutylene terephthalate, sensing part: polymethyl methacrylate,bracket: SUS304(steel use stainless 304), bolt: carbon steel, sleeve: SUS304(steel use stainless 304) Accessories Fixing bracket, M2 bolt: 4 Weight Approx. 70g (approx. 40g)
$41.05
Autonics Autonics Photoelectric Sensor, Photoelectric Type BTF1M-TDTD
Sensing type Through-beam type Sensing distance 1m Sensing target Opaque material of min. Ø2mm Light source Red LED(650nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Dark ON Control output NPN open collector Connection type Cable type(Ø2.5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 55℃, storage: -40 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: polybutylene terephthalate, sensing part: polymethyl methacrylate,bracket: SUS304(steel use stainless 304), bolt: carbon steel, sleeve: SUS304(steel use stainless 304) Accessories Fixing bracket, M2 bolt: 4 Weight Approx. 70g (approx. 40g)
$42.80
Autonics Autonics Photoelectric Sensor, Photoelectric Type BMS5M-TDT-P
Sensing type Through-beam type Sensing distance 5m Sensing target Opaque material of min. Ø10mm Light source Infrared LED(940nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 50mA Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 70℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Acrylonitrile butadiene styrene, Sensing part: Polycarbonate, Bracket: Steel plate cold commercial, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Accessories_Common Fixing bracket, Bolts, Nuts Weight Approx. 180g
$35.55
Autonics Autonics Photoelectric Sensor, Photoelectric Type BMS300-DDT-P
Sensing type Diffuse reflective type Sensing distance 300mm Sensing target Opaque, Translucent material Light source Infrared LED(940nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 70℃ Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at sensing distance Material Case: Acrylonitrile butadiene styrene, Sensing part: Acryl, Bracket: Steel plate cold commercial, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Accessories_Individual Adjuster driver Accessories_Common Fixing bracket, Bolts, Nuts Weight Approx. 100g
$30.05
Autonics Autonics Photoelectric Sensor, Photoelectric Type BPS3M-TDT-P
Sensing type Through-beam type Sensing distance 3m Sensing target Opaque material of min. Ø5mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Dark ON Control output PNP open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 65℃, storage: -25 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 90% RH Material Case: Polycarbonate, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Weight Approx. 66g
$40.00
Autonics Autonics Photoelectric Sensor, Photoelectric Type BPS3M-TDTL-P
Sensing type Through-beam type Sensing distance 3m Sensing target Opaque material of min. Ø5mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Operation mode Light ON Control output PNP open collector Connection type Cable type(Ø3, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 65℃, storage: -25 to 70℃ Protection structure IP67 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 90% RH Material Case: Polycarbonate, Bolt: Steel chromium molybdenum, Nut: Steel chromium molybdenum Weight Approx. 66g
$40.00
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX15M-TDT
Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø15mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 145g(approx. 95g)
$38.25
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX3M-PDT
Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Accessories_Individual Reflector(MS-2A) Weight Approx. 115g(approx. 50g)
$31.93
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM20M-TDTA
Sensing type Through-beam type Sensing distance 20m Sensing target Opaque material of min. Ø7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 220g (approx. 140g)
$42.80
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJR3M-PDT-W-P
Oil resistant/oil proof Oil resistant type Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 300mm (emitter of through-beam type: Ø4mm, 2-wire, 300mm),M12 connector(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP67 (IEC standard), IP67G (JEM standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Acrylonitrile butadiene styrene, LED Cap: PA12, Lens cover: Polymethyl Methacrylate Acrylic Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Accessories_Individual Reflector(MS-2S) Weight Approx. 95g(approx. 30g)
$79.61
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJR3M-PDT-W-P-F
Oil resistant/oil proof Oil proof type Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m(MS-2S) Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 300mm (emitter of through-beam type: Ø4mm, 2-wire, 300mm),M12 connector(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP67(IEC standard), IP67F(JEM standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material Case: Acrylonitrile butadiene styrene, LED Cap: PA12, Lens cover: Polymethyl Methacrylate Acrylic Accessories_Common Fixing bracket, M3 Bolts: 2, M3 Nuts: 2, Adjuster driver Accessories_Individual Reflector(MS-2S) Weight Approx. 95g(approx. 30g)
$59.71
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX100-DDT-C
Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Weight Approx. 60g(approx. 6g)
$32.74
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX10M-TDT-C
Sensing type Through-beam type Sensing distance 10m Sensing target Opaque material of min. Ø15mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 65g(approx. 12g)
$39.18
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX10M-TDT-C-P
Sensing type Through-beam type Sensing distance 10m Sensing target Opaque material of min. Ø15mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 65g(approx. 12g)
$39.18
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX15M-TDT-C
Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø15mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 65g(approx. 12g)
$43.74
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX15M-TDT-C-P
Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø15mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 65g(approx. 12g)
$43.74
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX15M-TDT-P
Sensing type Through-beam type Sensing distance 15m Sensing target Opaque material of min. Ø15mm Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 145g(approx. 95g)
$38.25
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX1M-DDT-C-P
Sensing type Diffuse reflective type Sensing distance 1m Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Weight Approx. 60g(approx. 6g)
$35.55
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX300-DDT-C
Sensing type Diffuse reflective type Sensing distance 300mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Weight Approx. 60g(approx. 6g)
$32.74
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX300-DDT-C-P
Sensing type Diffuse reflective type Sensing distance 300mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Weight Approx. 60g(approx. 6g)
$32.74
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX300-DDT-P
Sensing type Diffuse reflective type Sensing distance 300mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% of sensing distance Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Weight Approx. 100g(approx. 50g)
$27.37
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX30M-TDT
Sensing type Through-beam type Sensing distance 30m Sensing target Opaque material of min. Ø15mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 145g(approx. 95g)
$41.86
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX30M-TDT-C
Sensing type Through-beam type Sensing distance 30m Sensing target Opaque material of min. Ø15mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 65g(approx. 12g)
$47.36
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX30M-TDT-C-P
Sensing type Through-beam type Sensing distance 30m Sensing target Opaque material of min. Ø15mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 65g(approx. 12g)
$47.43
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX30M-TDT-P
Sensing type Through-beam type Sensing distance 30m Sensing target Opaque material of min. Ø15mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 4, adjustment screwdriver Weight Approx. 145g(approx. 95g)
$41.86
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX3M-PDT-C
Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output NPN open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Accessories_Individual Reflector(MS-2A) Weight Approx. 75g(approx. 6g)
$37.30
Autonics Autonics Photoelectric Sensor, Photoelectric Type BJX3M-PDT-C-P
Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by switch) Control output PNP open collector Connection type Ø4mm, 3-wire, 2m (emitter of through-beam type: Ø4mm, 2-wire, 2m)(AWG26, core diameter: 0.52mm, number of cores: 20, insulator out diameter: Ø1mm) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -40 to 70℃ Protection structure IP65(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: polycarbonateㆍLED CAP: polycarbonateㆍLens, Lens cover: polymethyl methacrylate Accessories_Common Mounting bracket, M3 bolt: 2, adjustment screwdriver Accessories_Individual Reflector(MS-2A) Weight Approx. 75g(approx. 6g)
$37.30
Autonics Autonics Photoelectric Sensor, Photoelectric Type BR200-DDTN-C
Sensing type Narrow beam reflective type Sensing distance 200mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 75℃ Protection structure IP66 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case - Brass, Ni-plateSensing part - Polycarbonate lens Accessories M18 fixing nut: 2, washer:1, adjustment screwdriver Weight Approx. 90g(approx. 50g)
$43.74
Autonics Autonics Photoelectric Sensor, Photoelectric Type BR200-DDTN-C-P
Sensing type Narrow beam reflective type Sensing distance 200mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 75℃ Protection structure IP66 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case - Brass, Ni-plateSensing part - Polycarbonate lens Accessories M18 fixing nut: 2, washer:1, adjustment screwdriver Weight Approx. 90g(approx. 50g)
$43.74
Autonics Autonics Photoelectric Sensor, Photoelectric Type BR200-DDTN-P
Sensing type Narrow beam reflective type Sensing distance 200mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 75℃ Protection structure IP66 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case - Brass, Ni-plateSensing part - Polycarbonate lens Accessories M18 fixing nut: 2, washer:1, adjustment screwdriver Weight Approx. 160g(approx. 120g)
$38.25
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRP200-DDTN-C
Sensing type Narrow beam reflective type Sensing distance 200mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 75℃ Protection structure IP66 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case-Polyamide(black), Sensing part-Polycarbonate lens Accessories M18 fixing nut: 2, adjustment screwdriver Weight Approx. 70g(approx. 30g)
$41.86
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRP200-DDTN-C-P
Sensing type Narrow beam reflective type Sensing distance 200mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 75℃ Protection structure IP66 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case-Polyamide(black), Sensing part-Polycarbonate lens Accessories M18 fixing nut: 2, adjustment screwdriver Weight Approx. 70g(approx. 30g)
$41.86
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRP200-DDTN-P
Sensing type Narrow beam reflective type Sensing distance 200mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 45mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø5, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -10 to 60℃, storage: -25 to 75℃ Protection structure IP66 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material Case-Polyamide(black), Sensing part-Polycarbonate lens Accessories M18 fixing nut: 2, adjustment screwdriver Weight Approx. 140g(approx. 100g)
$36.49
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM100-DDTA-C
Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 140g(approx. 30g)
$40.11
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM100-DDTA-C-P
Sensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 140g(approx. 30g)
$40.11
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM1M-DDTA
Sensing type Diffuse reflective type Sensing distance 1m Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 150g(approx. 70g)
$36.49
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM1M-DDTA-C
Sensing type Diffuse reflective type Sensing distance 1m Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 140g(approx. 30g)
$41.86
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM1M-DDTA-C-P
Sensing type Diffuse reflective type Sensing distance 1m Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 140g(approx. 30g)
$41.86
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM1M-DDTA-P
Sensing type Diffuse reflective type Sensing distance 1m Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Hysteresis(distance) Max. 20% at rated sensing distance Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 150g(approx. 70g)
$36.49
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM20M-TDTA-C
Sensing type Through-beam type Sensing distance 20m Sensing target Opaque material of min. Ø7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 160g (approx. 50g)
$48.35
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM20M-TDTA-C-P
Sensing type Through-beam type Sensing distance 20m Sensing target Opaque material of min. Ø7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 160g (approx. 50g)
$48.30
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM20M-TDTA-P
Sensing type Through-beam type Sensing distance 20m Sensing target Opaque material of min. Ø7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 220g (approx. 140g)
$42.80
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM30M-TDTA
Sensing type Through-beam type Sensing distance 30m Sensing target Opaque material of min. Ø7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 220g (approx. 140g)
$46.42
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM30M-TDTA-P
Sensing type Through-beam type Sensing distance 30m Sensing target Opaque material of min. Ø7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Emitter/Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(Ø4, 2m) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 220g (approx. 140g)
$46.53
Autonics Autonics Photoelectric Sensor, Photoelectric Type BRQM3M-PDTA-C
Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 3m Sensing target Opaque material of min. Ø75mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10-30VDC ±10%(ripple P-P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON/Dark ON(set by control wire) Control output NPN open collector Connection type Connector type(M12) Environment_Ambient illumination Sunlight: Max. 11,000lx, Incandescent lamp: Max. 3,000lx (received illumination) Environment_Ambient temperature -25 to 60℃, storage: -30 to 70℃ Protection structure IP67(IEC standard) Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Material ㆍCase: brass, Ni-plateㆍLens, Lens cover: polymethyl methacrylate acrylic Weight Approx. 140g(approx. 30g)
$42.80
