Products

Peacock NEW PIC TEST ; Without change lever, PCN-1B The New Pic Test is a lever type dial indicators used in all over the world. It is a measuring instrument used for measurements of restricted areas,and the outside/inside, groove width and centering with the dial gauge installed to the lathe or the milling cutting machine for measurements with the gauges held on the height gauges. Model PCN-1B Graduation 0.01mm  Range 0.8mm Without change lever (Automatic inverse type) The lever type dial gauge of this type has no change lever, the contact point inverses automatically in normal or reverse direction as desired and pointer turns always CW to improve the measuring efficiency. Miniature Bearing Used The miniature bearing used as a bearing at the pivot of the contact point to show good indication stability without any effect by rod play. O-ring used Oil resistance is enhanced by seating the O-ring in the turning sectionof the outer frame.   Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) Wide-range forward accuracy Adjacent error Backward error 0.01 0.8 0 - 40 - 0 8 5 3 0.3   Dimensions Model L (mm) PCN-1B 22.2  

Read more less

Peacock NEW PIC TEST ; Without change lever, PCN-1L The New Pic Test is a lever type dial indicators used in all over the world. It is a measuring instrument used for measurements of restricted areas,and the outside/inside, groove width and centering with the dial gauge installed to the lathe or the milling cutting machine for measurements with the gauges held on the height gauges. Model PCN-1L Graduation 0.01mm  Range 1.0mm Without change lever (Automatic inverse type) The lever type dial gauge of this type has no change lever, the contact point inverses automatically in normal or reverse direction as desired and pointer turns always CW to improve the measuring efficiency. Miniature Bearing Used The miniature bearing used as a bearing at the pivot of the contact point to show good indication stability without any effect by rod play. O-ring used Oil resistance is enhanced by seating the O-ring in the turning sectionof the outer frame.   Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) Wide-range forward accuracy Adjacent error Backward error 0.01 1.0 0 - 50 - 0 10 5 4 0.3   Dimensions Model L (mm) PCN-1L 42.8  

Read more less

Peacock NEW PIC TEST ; Without change lever, PCN-2 The New Pic Test is a lever type dial indicators used in all over the world. It is a measuring instrument used for measurements of restricted areas,and the outside/inside, groove width and centering with the dial gauge installed to the lathe or the milling cutting machine for measurements with the gauges held on the height gauges. Model PCN-2 Graduation 0.002mm  Range 0.28mm Without change lever (Automatic inverse type) The lever type dial gauge of this type has no change lever, the contact point inverses automatically in normal or reverse direction as desired and pointer turns always CW to improve the measuring efficiency. Miniature Bearing Used The miniature bearing used as a bearing at the pivot of the contact point to show good indication stability without any effect by rod play. O-ring used Oil resistance is enhanced by seating the O-ring in the turning sectionof the outer frame.   Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) Wide-range forward accuracy Adjacent error Backward error 0.002 0.28 0 - 140 - 0 3 2 2 0.3   Dimensions Model L (mm) PCN-2 17.8  

Read more less

Peacock NEW PIC TEST ; Without change lever, PCN-6 Vertical The New Pic Test is a lever type dial indicators used in all over the world. It is a measuring instrument used for measurements of restricted areas,and the outside/inside, groove width and centering with the dial gauge installed to the lathe or the milling cutting machine for measurements with the gauges held on the height gauges. Model  PCN-6 Vertical Graduation 0.002mm  Range 0.28mm Without change lever (Automatic inverse type) The lever type dial gauge of this type has no change lever, the contact point inverses automatically in normal or reverse direction as desired and pointer turns always CW to improve the measuring efficiency. Miniature Bearing Used The miniature bearing used as a bearing at the pivot of the contact point to show good indication stability without any effect by rod play. O-ring used Oil resistance is enhanced by seating the O-ring in the turning sectionof the outer frame.   Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) Wide-range forward accuracy Adjacent error Backward error 0.002 0.28 0 -140 - 0 3 2 2 0.3   Dimensions Model L (mm) PCN-6 17.8  

Read more less

Peacock NEW PIC TEST ; Without change lever, PCN-S The New Pic Test is a lever type dial indicators used in all over the world. It is a measuring instrument used for measurements of restricted areas,and the outside/inside, groove width and centering with the dial gauge installed to the lathe or the milling cutting machine for measurements with the gauges held on the height gauges. Model PCN-S Graduation 0.001mm  Range 0.14mm Without change lever (Automatic inverse type) The lever type dial gauge of this type has no change lever, the contact point inverses automatically in normal or reverse direction as desired and pointer turns always CW to improve the measuring efficiency. Miniature Bearing Used The miniature bearing used as a bearing at the pivot of the contact point to show good indication stability without any effect by rod play. O-ring used Oil resistance is enhanced by seating the O-ring in the turning sectionof the outer frame.   Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) Wide-range forward accuracy Adjacent error Backward error 0.001 0.14 0 - 70 - 0 3 2 2 0.3   Dimensions Model L (mm) PCN-S 11.7  

Read more less

Peacock Non-electrifying & Complete Anti-magnetic, PCN-1AU Test Indicators Model PCN-1AU Graduation 0.01mm Range 0.5mm   When non-electrifying type of Pic Test or New Pic Test is used, electric flow is blocked at the ceramic stem, even of a magnetic stand is electrified. Thus, you can continue your work without any problem. The dial face is light blue color and easy to read. Specifications and outer dimensions are the same as those of standard PC and PCN types, except the portion of stems Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.01 0.5 0 - 25 - 0 5 5 3 0.3 21.3  

Read more less

Peacock Non-electrifying & Complete Anti-magnetic, PCN-1BU Test Indicators Model PCN-1BU Graduation 0.01mm Range 0.8mm   When non-electrifying type of Pic Test or New Pic Test is used, electric flow is blocked at the ceramic stem, even of a magnetic stand is electrified. Thus, you can continue your work without any problem. The dial face is light blue color and easy to read. Specifications and outer dimensions are the same as those of standard PC and PCN types, except the portion of stems Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.01 0.8 0 - 40 - 0 8 5 3 0.3 22.2  

Read more less

Peacock Non-electrifying & Complete Anti-magnetic, PCN-5U Test Indicators (Vertical) Model PCN-5U Graduation 0.01mm Range 0.5mm  High accuracy When non-electrifying type of Pic Test or New Pic Test is used, electric flow is blocked at the ceramic stem, even of a magnetic stand is electrified. Thus, you can continue your work without any problem. The dial face is light blue color and easy to read. Specifications and outer dimensions are the same as those of standard PC and PCN types, except the portion of stems Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.01 0.5 0 - 25 - 0 5 5 3 0.3 21.3  

Read more less

Peacock Non-electrifying & Complete Anti-magnetic, PCN-6U Test Indicators (Vertical) Model PCN-6U Graduation 0.002mm Range 0.28mm  High accuracy When non-electrifying type of Pic Test or New Pic Test is used, electric flow is blocked at the ceramic stem, even of a magnetic stand is electrified. Thus, you can continue your work without any problem. The dial face is light blue color and easy to read. Specifications and outer dimensions are the same as those of standard PC and PCN types, except the portion of stems Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.002 0.28 0 - 140 - 0 3 2 2 0.3 17.8  

Read more less

Peacock Non-electrifying & Complete Anti-magnetic, PCN-SU Test Indicators Model PCN-SU Graduation 0.001mm Range 0.14mm  High accuracy When non-electrifying type of Pic Test or New Pic Test is used, electric flow is blocked at the ceramic stem, even of a magnetic stand is electrified. Thus, you can continue your work without any problem. The dial face is light blue color and easy to read. Specifications and outer dimensions are the same as those of standard PC and PCN types, except the portion of stems Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.001 0.14 0 - 70 - 0 3 2 2 0.3 11.7  

Read more less

Peacock One Revolution Dial Gauges; 0.001mm, 15DZ, Range 0.16mm,Large dial face ( Ø66.5 ) Model 15DZ  Graduation 0.001mm  Range 0.16mm  Large dial face ( Ø66.5 ) Contact Point ( XB-1 ) Flat back These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-freedue to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 15DZ 0.001 0.16(3.0) 80-0-80 2.5 ±3 ±4 - - 3 0.7 1.5   Dimensions (mm) Model A B C D E F G H I 15DZ 69.4 41.5 23.7 66.5 15.5 20 4 7.6 49  

Read more less

Peacock One Revolution Dial Gauges; 0.001mm, 18, Range 0.16mm,Oil-proof type Model 18  Graduation 0.001mm  Range 0.16mm  Long stem Contact Point ( XB-1 ) Oil-proof type Flat crystal Flat back These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 18 0.001 0.16(3.0) 80-0-80 2.5 ±3 ±4 - - 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 18 69.4 41.5 29 55 16.8 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.001mm, 5Z-XB, Range 0.14mm Model 5Z-XB  Graduation 0.001mm  Range 0.14mm  Contact Point ( XB-1 ) Flat back These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 5Z-XB 0.001 0.14(3.0) 70-0-70 2.5 ±3 ±4 - - 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 5Z-XB 69.4 41.5 30 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm , Range 0.8mm 17Z Model 17Z  Graduation 0.01mm  Range 0.8mm  Contact Point ( XB-1 ) Flat back These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 17Z 0.01 0.8(7.0) 40-0-40 8 ±9 ±10 - - 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 17Z 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm , Range 0.8mm, Oil-proof type, 17Z-SWA Model 17Z-SWA  Graduation 0.01mm  Range 0.8mm  Contact Point ( XB-2A ) Oil-proof type Flat back   These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 17Z-SWA 0.01 0.8(7.0) 40-0-40 8 ±9 ±10 - - 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 17Z-SWA 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm , Range 1.0mm, 117Z Model 117Z  Graduation 0.01mm  Range 1.0mm  Contact Point ( XB-1 ) Flat back   These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-free due to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange (dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 117Z 0.01 1.0(7.0) 50-0-50 8 ±9 ±10 - - 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 117Z 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm, 47SZ, Range 0.8mm,Small dial face ( Ø36 ) Model 47SZ  Graduation 0.01mm  Range 0.8mm  Small dial face ( Ø36 ) Flat back Contact Point ( XB-1 ) These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-freedue to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange(dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 47SZ 0.01 0.8(4.0) 40-0-40 9 - ±13 -   6 5 1.4   Dimensions (mm) Model A B C D E F G H I K 47SZ 41.1 20 9.7 36 13 15 3.5 6.5 32 23.1  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm, 47Z, Range 0.8mm Model 47Z  Graduation 0.01mm  Range 0.8mm  Long stem Flat back These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-freedue to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange(dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 47Z 0.01 0.8(4.0) 40-0-40 9 - ±13 -   6 5 1.4   Dimensions (mm) Model A B C D E F G H I K 47Z (47ZL) 58.9 20 30 36 13 -15 4 5.8 32 40.9  

Read more less

Peacock One Revolution Dial Gauges; 0.01mm, 47Z-XB, Range 0.8mm Model 47Z-XB  Graduation 0.01mm  Range 0.8mm  Long stem Flat back Contact Point ( XB-1 ) These are high-accuracy dial gauges with the pointer giving less than a full turn that can resist rigorous rigorous continuous measurement. The long stem is made of stainless steel, is high in strenght and is malfunction-freedue to fastening. The dial faces except No. 18 and 17B are easy to read with green and orange(dead zone) Model Graduation  (mm) Range (mm) (Free stroke) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 47Z-XB 0.01 0.8(4.0) 40-0-40 9 - ±13 -   6 5 1.4   Dimensions (mm) Model A B C D E F G H I K 47Z-XB 61.9 20 30 36 13 15 4 5.8 32 43.9  

Read more less

Peacock One Revolution Test Indicators (without change lever type), PCN-1LZAA The dial face is easy to read with light yellow and blue (dead zone)   Model PCN-1LZA Graduation 0.01mm Range 0.8mm Contact point (XN1L-2) is attached   Graduation (mm) Range (mm) Movable Range (mm) Indication error (µm) Measuring force less than (N) L(mm) Whole measuring range Adjacent error Backward error 0.01 0.8 0.9 8 5 4 0.3 42.8  

Read more less

Peacock One Revolution Test Indicators (without change lever type), PCN-2ZA The dial face is easy to read with light yellow and blue (dead zone)   Model PCN-2ZA Graduation 0.002mm Range 0.2mm High accuracyContact point (XN2-2) is attached   Graduation (mm) Range (mm) Movable Range (mm) Indication error (µm) Measuring force less than (N) L(mm) Whole measuring range Adjacent error Backward error 0.002 0.2 0.24 3 2 2 0.3 17.8  

Read more less

Peacock Pic test holder, PTH-1,PTH-2

Read more less

Peacock Replaceable Ball contact points (Screw pitch M2.5 P=0.45mm),X-Series     Part No. L (mm) Ball  X-1 9 Steel  X-103 3.5 Steel  X-105 5 Steel  X-107 7.5 Steel  X-112 12.5 Steel  XB-1 9 Carbide

Read more less

Peacock Replaceable contact points ,XS-3 series     Part No. L (mm) Material  XS-3 25 SKS 3  XS-310 10 SKS 3  XS-320 20 SKS 3  XS-330 30 SKS 3

Read more less

Peacock Signal Gauge S-5 Model S-5 Graduation 0.001mm Measurement range 0.1 ( ±0.05 ) mm   With its high resolution of 0.001mm scale, it is most suitable for  judgement of the values measured on finished parts with high accuracy. Specifications Model S-5 Spindle Movable Range 3mm Graduation 0.001mm Tolerance Setting Range 0.1 ( ±0.05 ) mm Accuracy ±0.002mm Measuring Force Less than 1.2N ( 120gf ) Contact capacity MAX DC24V  20mA Number of judgement Stages Three stages of -NG, OK and +NG Cord length 2 m Stem diameter ø8 mm Operating temperature range 0 - 60 ℃ Options Code Length 5m 10m / Back cover with Lug (GB-1A) Dial indicator for setting ----- Weight 180 g Cable signal table 　 Caution When the current of 10 to 20 mA is used to drive a photocoupler, etc., the contact may be worn a little earlier. In SC-2A type, the COM terminal is body-grounded ( If leak current is found in other devices, put a gauge into floating status before mounting it ). In SC-2A type, a spindle can be set in a range from its free status to 3mm. Although it may be movable in excess of this limit, you cannot set it in such an excessive level in order to protect the spindle. In SC-2A type, when a dial gauge is dismounted after setting the tolerance, never forget to mount a dust protective cap.  

Read more less

Peacock Signal Gauge S-7 Model S-7 Graduation 0.01mm Measurement range 1.0 ( ±0.5 ) mm   With its resolution of 0.01mm scale, it is generally used. Its pointer is in an anti-shock structure so as to give stable discriminating signals Specifications Model S-7 Spindle Movable Range 3mm Graduation 0.01mm Tolerance Setting Range 1.0 ( ±0.5 ) mm Accuracy ±0.005mm Measuring Force Less than 1.2N ( 120gf ) Contact capacity MAX DC24V  20mA Number of judgement Stages Three stages of -NG, OK and +NG Cord length 2 m Stem diameter ø8 mm Operating temperature range 0 - 60 ℃ Options Code Length 5m 10m / Back cover with Lug (GB-1A) Dial indicator for setting ----- Weight 180 g Cable signal table 　 Caution When the current of 10 to 20 mA is used to drive a photocoupler, etc., the contact may be worn a little earlier. In SC-2A type, the COM terminal is body-grounded ( If leak current is found in other devices, put a gauge into floating status before mounting it ). In SC-2A type, a spindle can be set in a range from its free status to 3mm. Although it may be movable in excess of this limit, you cannot set it in such an excessive level in order to protect the spindle. In SC-2A type, when a dial gauge is dismounted after setting the tolerance, never forget to mount a dust protective cap.  

Read more less

Peacock Signal Gauge S-9 Model S-9 Graduation 0.05mm Measurement range 3.0 ( ±1.5 ) mm   With its most gross scale of 0.05 mm, it is applicable to select grossly worked parts and as cast parts at the low-est costs Specifications Model S-9 Spindle Movable Range 4mm Graduation 0.05mm Tolerance Setting Range 3.0 ( ±1.5 ) mm Accuracy ±0.025mm Measuring Force Less than 1.2N ( 120gf ) Contact capacity MAX DC24V  20mA Number of judgement Stages Three stages of -NG, OK and +NG Cord length 2 m Stem diameter ø8 mm Operating temperature range 0 - 60 ℃ Options Code Length 5m 10m / Back cover with Lug (GB-1A) Dial indicator for setting ----- Weight 180 g Cable signal table 　 Caution When the current of 10 to 20 mA is used to drive a photocoupler, etc., the contact may be worn a little earlier. In SC-2A type, the COM terminal is body-grounded ( If leak current is found in other devices, put a gauge into floating status before mounting it ). In SC-2A type, a spindle can be set in a range from its free status to 3mm. Although it may be movable in excess of this limit, you cannot set it in such an excessive level in order to protect the spindle. In SC-2A type, when a dial gauge is dismounted after setting the tolerance, never forget to mount a dust protective cap.  

Read more less

Peacock Signal Gauge SC-2A ( Signal Checker ) Model SC-2A ( Signal Checker ) Measurement range 3.0 mm   Once its tolerance is set, a dial gauge is dismounted before using it so that its endurance is really improved. With its large tolerance setting range of 3mm, it is most suitable for judgement of the measured values ina wide tolerance range. Specifications Model SC-2A Spindle Movable Range 10mm Graduation ※1 Tolerance Setting Range 3.0 mm Accuracy ±0.005mm Measuring Force Less than 1.2N ( 120gf ) Contact capacity MAX DC24V  20mA Number of judgement Stages Three stages of -NG, OK and +NG Cord length 2 m Stem diameter ø8 mm Operating temperature range 0 - 60 ℃ Options Dial gauge for setting Dial indicator for setting Model 107F, 5F Weight 150 g Cable signal table 　 Caution When the current of 10 to 20 mA is used to drive a photocoupler, etc., the contact may be worn a little earlier. In SC-2A type, the COM terminal is body-grounded ( If leak current is found in other devices, put a gauge into floating status before mounting it ). In SC-2A type, a spindle can be set in a range from its free status to 3mm. Although it may be movable in excess of this limit, you cannot set it in such an excessive level in order to protect the spindle. In SC-2A type, when a dial gauge is dismounted after setting the tolerance, never forget to mount a dust protective cap.    

Read more less

Peacock Special Type Test Indicators ; Large dial face ,PCN-1AD Model PCN-1AD Graduation 0.01mm Range 0.5mm   The dial plate size of PCN-1A, PCN-1L, and PCN-2BD models has been enlarged, with easy reading due to the lager scale spacing, as a result. Screw type long stems are standard for these large dial face test indicators. Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.01 0.5 0 - 25 - 0 5 5 3 0.3 21.3  

Read more less

Peacock Special Type Test Indicators ; Large dial face ,PCN-1LD,Long contact point Model PCN-1LD Graduation 0.01mm Range 1.0mm   The dial plate size of PCN-1A, PCN-1L, and PCN-2BD models has been enlarged, with easy reading due to the lager scale spacing, as a result. Screw type long stems are standard for these large dial face test indicators. Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.01 1.0 0 - 50 - 0 10 5 4 0.3 42.8  

Read more less

Peacock Special Type Test Indicators ; Large dial face ,PCN-2BD Model PCN-2BD Graduation 0.002mm Range 0.2mm   The dial plate size of PCN-1A, PCN-1L, and PCN-2BD models has been enlarged, with easy reading due to the lager scale spacing, as a result. Screw type long stems are standard for these large dial face test indicators. Graduation (mm) Range (mm) Reading Accuracy (µm) Measuring force less than (N) L (mm) Wide-range forward accuracy Adjacent error Backward error 0.002 0.2 0 - 100 - 0 3 2 2 0.3 16.6  

Read more less

Peacock Standard Cylinder Gauges ; CC-1 Peacock offers a complete line of Dial Bore Gauges with interchangeable anvils and necessary accessories to perform close tolerance measurements of holes, taper and roundness. Dial gauge mounting knob is very simple of and sure avoiding demerit of collet-system. The contact point is tungsten carbide ball. Dial gauge is not furnished and supplied only on request. Suitable dial gauges are 17Z, 57B (0.01mm) and 15Z, 5F (0.001mm). The standard ball tipped at the replacement rod is made of steel. The sintered hard-alloy ball is also available to tip.   Model CC-1 Range 18 - 35mm Specifications Model Range (mm) Effective measuring range (mm) Wide range accuracy (µm) Adjacent error (µm) Repeated accuracy (µm) Number of anvils (mm) Thickness of spacers (mm) Extension collar (mm) CC-1 18-35 1.2 5 2 2 Intervals 2mm×9  0.5,1mm each 　   Dimensions (mm) Model A B C D E F G H I J CC-1 249 150 5.75 70 23 20 10 18 - 35 13 11.5    

Read more less

Peacock Standard Cylinder Gauges ; CC-3C Peacock offers a complete line of Dial Bore Gauges with interchangeable anvils and necessary accessories to perform close tolerance measurements of holes, taper and roundness. Dial gauge mounting knob is very simple of and sure avoiding demerit of collet-system. The contact point is tungsten carbide ball. Dial gauge is not furnished and supplied only on request. Suitable dial gauges are 17Z, 57B (0.01mm) and 15Z, 5F (0.001mm). The standard ball tipped at the replacement rod is made of steel. The sintered hard-alloy ball is also available to tip.   Model CC-3C Range 50 - 150mm With 50mm extension collar   Specifications Model Range (mm) Effective measuring range (mm) Wide range accuracy (µm) Adjacent error (µm) Repeated accuracy (µm) Number of anvils (mm) Thickness of spacers (mm) Extension collar (mm) CC-3C 50~150 1.2 5 2 2 Intervals 5mm×11 1, 2, 3mm each 50mm × 1　   Dimensions (mm) Model A B C D E F G H I J CC-3C 253 150 9 70 23 20 10 50~150 30 18    

Read more less

Peacock Standard Cylinder Gauges ; CC-4 Peacock offers a complete line of Dial Bore Gauges with interchangeable anvils and necessary accessories to perform close tolerance measurements of holes, taper and roundness. Dial gauge mounting knob is very simple of and sure avoiding demerit of collet-system. The contact point is tungsten carbide ball. Dial gauge is not furnished and supplied only on request. Suitable dial gauges are 17Z, 57B (0.01mm) and 15Z, 5F (0.001mm). The standard ball tipped at the replacement rod is made of steel. The sintered hard-alloy ball is also available to tip.   Model CC-4 Range 100 - 160mm     Specifications Model Range (mm) Effective measuring range (mm) Wide range accuracy (µm) Adjacent error (µm) Repeated accuracy (µm) Number of anvils (mm) Thickness of spacers (mm) Extension collar (mm) CC-4 100~160 1.2 5 2 2 Intervals 10mm×7 1, 2, 3, 4mm each   Dimensions (mm) Model A B C D E F G H I J CC-4 370 250 12 85 23 25 13 100~160 50 24    

Read more less

Peacock Standard Cylinder Gauges ; CC-6 Peacock offers a complete line of Dial Bore Gauges with interchangeable anvils and necessary accessories to perform close tolerance measurements of holes, taper and roundness. Dial gauge mounting knob is very simple of and sure avoiding demerit of collet-system. The contact point is tungsten carbide ball. Dial gauge is not furnished and supplied only on request. Suitable dial gauges are 17Z, 57B (0.01mm) and 15Z, 5F (0.001mm). The standard ball tipped at the replacement rod is made of steel. The sintered hard-alloy ball is also available to tip.   Model CC-6 Range 250 - 400mm     Specifications Model Range (mm) Effective measuring range (mm) Wide range accuracy (µm) Adjacent error (µm) Repeated accuracy (µm) Number of anvils (mm) Thickness of spacers (mm) Extension collar (mm) CC-6 250~400 1.2 5 2 2 Intervals 10mm×16 1, 2, 3, 4mm each   Dimensions (mm) Model A B C D E F G H I J CC-6 540 400 14 100 26 25 16 250~400 100 28    

Read more less

Peacock Standard Dial Gauges; 0.001mm and 0.005mm  JIS B 7503, 5B Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way. Model 5B Graduation 0.001mm Range 1mm Lug back   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 5B 0.001 1 0 -100-0 2.5 ±3 ±4 ±4 ±5 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 5B 60 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.001mm and 0.005mm  JIS B 7503, 5F Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way. Model 5F Graduation 0.001mm Range 1mm Flat back   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 5F 0.001 1 0 -100-0 2.5 ±3 ±4 ±4 ±5 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 5B 60 41.5 18.5 53 14.5 - 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.001mm,  25 ,Range 2mm Model 25  Graduation 0.001mm  Range 2mm  Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 25 0.001 2 ±0 -100-0 4 ±5 ±6 ±6 ±7 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 25 72 42 25 66.5 14.5 20 4 7.5 62.5  

Read more less

Peacock Standard Dial Gauges; 0.001mm,  25S ,Range 2mm, Small dial face type( Ø55.7mm ) Model 25S  Graduation 0.001mm  Range 2mm  Small dial face type ( Ø55.7mm ) Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 25S 0.001 2 0 -100-0 4 ±5 ±6 ±6 ±7 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 25S 60 42.6 17 55.7 14.5 20 5 7 52  

Read more less

Peacock Standard Dial Gauges; 0.001mm,  5-DX ,Range 1mm Model 5-DX  Graduation 0.001mm  Range 1mm  Durable type (Spindle Ø5mm) Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 5-DX 0.001 1 0 -100-0 2.5 ±3 ±4 ±4 ±5 3 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 5-DX 60 42.6 17 55.7 14.5 20 5 7 52  

Read more less

Peacock Standard Dial Gauges; 0.001mm,  55 ,Range 5mm Model 55  Graduation 0.001mm  Range 5mm  Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 55 0.001 5 0 -100-0 5 ±6 ±7 ±8 ±10 4 1 1.5   Dimensions (mm) Model A B C D E F G H I 55 73 52 25 66 17 20 4.5 7 62.5  

Read more less

Peacock Standard Dial Gauges; 0.001mm, 5B-HG  High Precision Type Model 5B-HG High Precision Type  Graduation 0.001mm  Range 1mm  Indication error ±3µm Retrace error 2µm Includes accuracy certification Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 5B-HG 0.001 1 0-100-0 2 ±2 ±3 ±3 ±3 2 0.5 1.5   Dimensions (mm) Model A B C D E F G H I 5B-HG 60 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.01mm  JIS B 7503  , 107-DX Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way. Model 107-DX Graduation 0.01mm Range 10mm Durable type ( Spindle Ø5mm )Lug back   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 107-DX 0.01 10 ±0 -50-100 8 ±9 ±10 ±15 ±15 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 107-DX 65 50.7 17 55.7 14.5 20 5 7 52  

Read more less

Peacock Standard Dial Gauges; 0.01mm  JIS B 7503  , 107F-RE ,Spindle pull-up release Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way. Model 107F-RE Graduation 0.01mm Range 10mm Spindle pull-up release ( RE-1 ) 280 mm longFlat back   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 107F-RE 0.01 10 ±0 -50-100 8 ±9 ±10 ±15 ±15 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 107F-RE 65 41.5 18.5 53 14.5 20 54 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.01mm  JIS B 7503  , 107F-T ,Reversed dial Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way. Model 107F-T  Graduation 0.01mm  Range 10mm  Reversed dial Flat back   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 107F-T 0.01 10 ±100 -50-0 8 ±9 ±10 ±15 ±15 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 107F-T 65 41.5 18.5 53 14.5 - 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.01mm , Oil-proof type  , 107-SWA Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way. Model 107-SWA  Graduation 0.01mm  Range 10mm  Oil-proof type Flat crystal Contact point ( X-2A ) Lug back   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 107-SWA 0.01 10 ±0 -50-100 8 ±9 ±10 ±15 ±15 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 107-SWA 65 41.5 18.5 55 15 20 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.01mm, 107-HG  High Precision Type, Range 10mm Model 107-HG High Precision Type  Graduation 0.01mm  Range 10mm  Indication error ±10µm Retrace error 4µm Includes accuracy certification Lug back Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 107-HG 0.01 10 ±0-50-100 6 ±7 ±8 ±10 ±10 4 5 1.4   Dimensions (mm) Model A B C D E F G H I 107-HG 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less

Peacock Standard Dial Gauges; 0.01mm, JIS B 7503 , 107 Dial Gauges are widely used manufacturing plants. ○ The stem, made of SK quench hardened with strength, is malfunction-free due to fastening. ○ The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle. ○ The turning section of the outer frame sealed by the O-ring and the back inside sealed by the packing are waterproof and dust-proof in construction. ○ The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.  Model 107 Graduation 0.01mm Range 10mm Lug back   Model Graduation  (mm) Range (mm) Reading Indication error (µm) Backward error (µm) Repeatability (µm) Measuring force less than (N) Revolution Whole measuring range 1/10 1/2 One Two 107 0.01 10 ±0 -50- 100 8 ±9 ±10 ±15 ±15 5 5 1.4   Dimensions (mm) Model A B C D E F G H I 107 65 41.5 18.5 53 14.5 20 4 6.5 49  

Read more less